Specifications_Custom_Trailer.pdf
PDF 72 KB Posted
- Attached to
- WI GENOA NFH CUSTOM TRAILER Federal contract opportunity
- Solicitation number
- 140FS224Q0232
About this file
This document is a specification for a custom insulated work trailer that will house a wet lab and culture facility for the production of aquatic resources at the Genoa National Fish Hatchery in Genoa, Wisconsin.
The key requirements for the 24-foot long, 8.5-foot wide, 8-foot high trailer include: aluminum frame and walls to reduce weight, tandem axles with electric brakes, 16-inch radial tires, two rear swing doors, one side door, one roof vent fan, and the ability to sustain a 31.5 lb/sq ft wall load for piping/head tank. Interior specifications detail the 100-amp electrical panel, multiple 110V outlets, 4 ceiling-mounted LED lights, a 3-foot aluminum work bench, and plumbing for city water. This trailer will support the hatchery's aquatic resource production.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140FS224Q0232.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications Custom Trailer
Genoa National Fish Hatchery
Genoa National Fish Hatchery, located in Genoa Wisconsin, has a requirement for a custom insulated work trailer that will house a wet lab and culture facility for the production of aquatic resources.
Minimum Specifications:
Trailer Dimensions
• 24 feet long
• 8 feet 6-inch wide
• 8 feet high
Other Salient Characteristics
(2) 6.0k rubber torsion axles with electric braking, and breakaway braking 16-inch radial tires (4)
Frame shall be aluminum to reduce weight as it will be placed on wet, sandy, and unstable soil structures
Walls .040” aluminum
Ceiling .040” aluminum on walls
Aluminum plank floor
(2) Tandem double swinging rear doors
(2) (1) double sealed 30” screened window, (1) double sealed 24” fan with electric built into back tandem door – left side (driver’s side)
36” side door with 29-inch X 29-inch screened window and fold up step front door
(2) Aluminum Floor drain installed in front and back of trailer – placed 1/3 from front and 1/3 from back.
(2) 5/16-inch coupler with 21,000 pound drag rating
14 in. x 14 in. roof fan vent installed front quarter center
Must be able to sustain a load of 31.5 lbs. per square foot on wall for piping/head tank.
DOT standards apply
Interior Specifications:
100 amp electrical service panel (surface mounted) installed above bench in front wall with extra electrical capacity
(2) 110 vertical electrical outlets 1 feet from back of trailer – 5 ft high – both sides of trailer
(2) 110 vertical outlet located 1 foot to the rear of front entry door - 5 ft high
(1) electrical outlets above work bench
(4) 4 ft LED lights hung on ceiling down trailer. Wiring inside walls
(1) 4 ft LED light hanging perpendicular to length of trailer at worktop area. Wiring inside walls.
Hard wired smoke detector and CO monitor
3 ft aluminum bench curb side front
Accessories:
City water entry and power
Gravel guard 24 inch
File details come from the government source that posted it. Updated .