Specification Sheet (Attachment No.1).docx
DOCX document 25 KB Posted
- Attached to
- V-Groove Fiber Array Assemblies Federal contract opportunity
- Solicitation number
- FA875123Q0148
About this file
This specification sheet outlines technical requirements for four types of V-groove fiber array assemblies to be supplied under Solicitation Number FA875123Q0148 from the Department of the Air Force Materiel Command Research Laboratory. The assemblies must contain 8 channels of between 0.5 and 2 meter long 9/125 micron singlemode fibers pigtailed with FC/APC connectors and loose tube buffering. The specification requires 15 each of 127 micron flat and angled V-groove assemblies and 15 each of 250 micron flat and angled V-groove assemblies meeting detailed technical specifications for core offset, insertion loss, facet polish angle, and channel spacing. Acceptable part numbers from manufacturer OZOptics are provided as examples, but equivalent products from other manufacturers will be considered if sufficient technical information is provided to allow evaluation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Offeror Representations and Certifications--(Attachment No.2).docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Brand Name or Equivalent Fiber V-groove assemblies meeting the following minimum specifications/salient characteristics:
All assemblies are composed of
· 8 channels
· Fibers are:
· Between 0.5 and 2 meters in length
· 9/125 micron SMF28e+ or equivalent MFD singlemode fiber
· pigtailed with FC/APC connectors
· 0.9mm OD loose clad jacket
· No lid to V-groove or equivalent for chip-with-ledge coupling
· < 0.5 micron core offset from specified spacing
· < 0.5 dB per fiber insertion loss 1: Flat, 127 micron V-groove assembly (15 each)
· 127 micron spacing between fibers
· Optical facet with 0 degree polish
· Suggested part number: OZOptics* VGA-8-127-0-X-14.4-4.0-1.03-S-1300/1550-9/125-3A-1-1-0-SP-NoLid, or equal 2: Angled, 127 micron V-groove assembly (15 each)
· 127 micron spacing between fibers
· Optical facet with 8+-0.3 degree polish from top to bottom
· Suggested part number: OZOptics* VGA-8-127-8-A-14.4-4.0-1.03-S-1300/1550-9/125-3A-1-1-0-SP-NoLid, or equal 3: Flat, 250 micron V-groove assembly (15 each)
· 250 micron spacing between fibers
· Optical facet with 0 degree polish
· Suggested part number: OZOptics* VGA-8-250-0-X-10.3-3.8-1.03-S-1300/1550-9/125-3A-1-1-0-SP-NoLid, or equal 2: Angled, 250 micron V-groove assembly (15 each)
· 250 micron spacing between fibers
· Optical facet with 8+-0.3 degree polish from top to bottom
· Suggested part number: OZOptics* VGA-8-250-8-A-10.3-3.8-1.03-S-1300/1550-9/125-3A-1-1-0-SP-NoLid, or equal
* OZOptics is a manufacturer whose commercial offerings are known to satisfy the Government’s requirement. Accordingly, their part number is provided here for reference, only. The identified items reflect the salient physical, functional, or performance characteristics that reflect the characteristics and level of quality that will satisfy the minimum Government requirement; however the offeror may provide a solution equivalent to or exceeding the functional and performance characteristics of the identified items and it will be considered for technical acceptability.
Offerors must provide technical information in sufficient detail to allow adequate and thorough technical evaluation of the proposed equal solution. The Government will evaluate products on the basis of information furnished by the offeror or identified in the offer and reasonably available to the Government. The Government is not responsible for obtaining technical information in support of a proposed equivalent solution.
File details come from the government source that posted it. Updated .