Specification_FDS.pdf

WMEC 270 Fire Detection System Replacement

PROCUREMENT SPECIFICATION

FY2024

Developed By: Kevin Miller

(Rev-0, 1 March 2024) ii

TABLE OF CONTENTS

WORK ITEM 1: WMEC 270 Fire Detection System Replacement 1 WORK ITEM 2: WMEC 270 Fire Detection System Kit (Optional) 8 WORK ITEM 3: Travel and Per Diem 10 Attachment 1: Test Procedure and Data Sheets 11

Error! Bookmark not defined.

Work Item 1: WMEC 270 Fire Detection System, Replace

1. Statement of Problem:

The current Siemens/ Pyrotronics III system on the 270’ cutters are obsolete and no longer supportable. This system will be replaced by a new USCG Type Approved addressable fire detection system.

2.0 Supporting References:

a. SFLC ESD NAME ESS Technical Standard TS-436 Electrical Alarm, Safety and Warning Systems

b. MIL-DTL-2003B

c. SFLC Std Spec 0000 General Requirements

d. SFLC Std Spec 3042 Shipboard Electrical Cable Removal, Relocation, Splice, Repair, and Installation

e. SFLC Std Spec 3041 Shipboard Electrical Cable Test

f. 46 CFR 161.002

g. 46 CFR 113.10

h. IMO Code on Alerts and Indicators

i. Coast Guard Dwg 901 WMEC 436-003, Rev V, Fire & Smoke Detection & Quarterdeck Monitoring System BLK & IWD

j. Coast Guard Dwg 905 WMEC 436-003, Rev P, Fire & Smoke Detection & Quarterdeck Monitoring System BLK & IWD

k. Coast Guard Dwg 901 WMEC 320-035, Rev AT, Electrical One Line Diagram (for Hulls 901 thru 904)

l. Coast Guard Dwg 905 WMEC 320-014, Rev AN, Electrical One Line Diagram (for Hull 905 and on)

m. Coast Guard Tech Pub 3365B Fire and Smoke Detection system 270 WMEC (A) and (B) Class Cutters

n. SFLC Std Spec 0850 General Requirements for Drawing Preparation

o. SFLC Std Spec 0860 General Requirements for Technical Publication

p. MIL-DTL-24643

q. MIL-DTL-24640

r. American Society for Testing and Materials (ASTM) D3951, 2010, Standard Practice for Commercial Packaging

s. MIL-STD-2073

t. MIL-STD-129

u. MIL-STD-130

v. ISO/IEC 16388

3.0 Statement of work:

3.1 Scope: The Contractor must provide the following material and services for the replacement of the fire detection system on a 270 WMEC identified by USCG SFLC MEC Product Line after contract award.

3.1.1 General Electrical installation:

3.1.1.1 The Contractor must handle all interferences in accordance with SFLC Std Spec 0000, paragraph 3.3.5 (Interferences).

3.1.1.2 Cable runs, connection boxes, and power supplies must be in accordance with Ref (d).

3.1.1.3 Electrical installations must be in compliance with Ref (b).

3.1.1.4 Electrical and Electronic Designating and Marking must be in accordance with Ref (d).

3.1.2 Drawings and Technical Publications:

3.1.2.1 All drawings must be in accordance with Ref (n) (except AutoCAD may be 2020 or earlier)

3.1.2.2 Technical publications must be in accordance with Ref (o).

3.1.2.3 Drawings that begin 901-WMEC are for hulls 901-904.

Drawings that begin 905-WMEC are for hulls 905 and on.

3.2 Existing Fire Detection System:

3.2.1 Conduct a shipcheck and analysis of the existing fire detection system: alarm panel, annunciators, detector devices and any repeater panels using Refs (m), and (i) or (j), and (k) or (l), depending on whether a WMEC 270 A Class or WMEC 270 B-Class is selected, as guidance. Analysis of the existing fire detection system must include:

• Verification of equipment quantities, type of appliances, location, including mounting bases and/or adapters.

• Verification that existing power sources are satisfactory.

• Assessment of level of effort that will be required in renewing cable, including restoration of watertight boundaries disturbed during cable renewal.

• Interface with existing bilge and intrusion alarm systems.

This analysis must be used as guidance in the selection of replacement equipment.

3.2.2 Contractor must remove all existing Siemens/Pyrotronics System III components associated with the existing fire detection system and dispose of in accordance with applicable Federal, State and Local regulations. See paragraph 3.5.1 for equipment to be retained.

3.2.3 Cable:

3.2.3.1 Contractor must remove all existing cable associated with the old fire detection system and install all new cable for the new Fire detection system in accordance with Ref (d).

3.2.3.2 New cable must be chosen in accordance with Ref (p) or Ref (q) as required by the equipment manufacturer. Fire detection systems are required to be operable under a fire condition. Cable suppling the fire detection system must include the 3-hour circuit integrity and watertight properties. Examples include MIL-DTL-24643/19 through 24 or MIL-DTL-24640.

3.2.3.3 Splicing of cable is not allowed.

3.2.3.4 Contractor must properly dispose of equipment and cable using proper marine practices and Coast Guard standards.

3.3 New Fire Detection System Requirements:

3.3.1 Identify and furnish a new Fire Detection system, including:

• *(1) new alarm panel

• *(5) remote annunciators

• *(9) manual pull stations

• *Up to (4) thermal detectors

• *(2) IR flame detectors

• *Up to (10) ionization smoke detectors for ventilation duct including sampling tubes and housings

• *Up to (50) photoelectric smoke detectors

• *Up to (13) horns with strobe

• *(10) remote alarm lamps

• *Up to (3) vibrating bells

• *Detector bases/adapters, and all other associated system components, that is type approved per Ref (f) based on analysis performed in 3.2.1.

• Cables, junction boxes and all other required wiring components required for installation

Quantities listed are for bidding purposes. Actual quantities will vary depending on Class type, individual cutter configurations, etc, and must be determined from the shipcheck and system analysis conducted in paragraph 3.2.1. Submit a Condition Found Report to the COR for additional quantities needed.

3.3.1.1 All components of the system must be type approved under one certificate

3.3.1.2 The fire detection system install must also comply with the requirements of Ref (a), Ref (g) and Ref (h).

3.3.1.3 One of the annunciators must be a portable unit, connected via umbilical cord to the Quarterdeck Terminal Box, that has the ability to test Ships alarms and be integrated with the bilge and intrusion alarm systems such that all fire detection system alarms, bilge alarms, intrusion alarms, high temp and flood alarms, and temperatures in Small Arms Locker, Magazine, Small Arms Magazine and Ordnance Workshop can be monitored.

3.4 Installation Work Items: Contractor:

3.4.1 A temporary means of fire detection and alarm must be provided prior to removal of permanent fire detection and alarm system and for the duration until the new system is fully operational. Submit a plan for the temporary fire detection and alarm method to the COR and the USCG Points of Contact (see Section 8.0) for approval (see Deliverables 4.4).

3.4.2 Contractor must install all components identified and furnished in 3.3.1.

3.4.3 Contractor must megger and tag new cable in accordance with Ref (d).

3.4.4 Contractor must mark all cable in accordance with Ref (d).

3.4.5 Upon completion of installation contractor must program the fire control panel to recognize all field devices. Provide cutter all necessary software to conduct any additional programming or system troubleshooting onsite without having to remove any components from system for outside diagnosis (see Deliverables 4.3).

3.4.6 Contractor must ensure that a shipboard representative (EO, LPO) be involved with the programming to add proper device labels to all detectors and pull stations.

3.4.7 The Contractor upon completion of installation and programming, must conduct a final acceptance test performed for the US Coast Guard and vessel representative in accordance with the attached Test Procedure. The acceptance test must be a 100% functional test that shows the operability of the fire detections system panel, all detectors/ sensors, manual call points, annunciators and other associated equipment. The testing must also show the two sources of power for the system and their operation. Record all data in the attached Data Sheets and submit results to the COR.

3.4.8 The contractor must provide 2 hours of deck plate training for crew of the vessel to demonstrate the full functionality of the fire detection and alarm system. Submit a training agenda/plan to the COR for USCG approval (see Deliverables 4.5). This training must allow for “hands-on” operation of the system and include:

• Demonstration of proper operation and controls of all modes of the main fire alarm panel and annunciators.

• Programming procedure.

• System reboot procedure.

• General maintenance procedures.

• Troubleshooting procedures.

3.4.9 Upon completion of the installation of the fire and smoke detection system and satisfactory performance testing, a factory trained technician must file a letter of certification stating that the system functions properly and conforms to specifications. Provide a copy of the letter of certification to the COR.

3.5 Disposition of Removed Equipment:

3.5.1 Contractor must retain the following fire detection system components and package and ship to the address indicated:

SFLC/ESD/ESS

707 E. Ordinance Rd Baltimore Md. 21226

3.5.1.1 Display Panel PMD-475, qty 4

3.5.1.2 PLC box located in ECC (contains: PLC, I/O cards, Power Supply), qty 1

3.5.1.3 Aft Vestibule Network Connection Box, qty 1

3.5.1.4 Aft Vestibule Temperature Box, qty 1

3.5.1.5 Quarterdeck Remote Annunciator, qty 1

3.6 Place of Performance

3.6.1 For bidding purposes, assume the work will be performed at selected Cutter’s homeport at USCG Base Portsmouth, Portsmouth, VA. Travel to locations other than USCG Base Portsmouth will be addressed by Change Request.

4.0 Deliverables:

4.1 Ship Check Report and Cost estimate.

4.2 Documentation: Documentation must be provided in a CD format with all file formats as per Ref (n) and Ref (o).

4.2.1 Provide 2 copies of ship check report,

4.2.2 Ripout and installation drawings (one set) (contact MEC Product Line POC for drawing numbers)

4.2.3 Red-line mark up of Ref (i) or Ref (j) as Class applicable (one)

4.2.4 Elementary wiring Diagram and COED (one each) (contact MEC Product Line POC for drawing numbers)

4.2.5 Tech pub or tech pub inserts if modifying the existing TP, Ref (m) (one)

4.2.6 Letter of Fire Detection and Alarm System certification.

4.3 All software necessary, furnished on CD to conduct any additional programming or system troubleshooting onsite without having to remove any components from system for outside diagnosis.

4.4 Plan for the temporary fire detection and alarm method.

4.5 Crew training plan and agenda.

5.0 Schedule:

5.1 Attend a kick-off Meeting at USCG Ordnance Road Baltimore MD or other location TBD.

5.2 Attend ship check of 270 WMEC Class Cutter to inspect and verify first-hand the recommendations and requirements of USCG-SFLC-ESD-NAME-ELEC SYS. Provide a full report of findings (4.2.1).

5.3 Submit temporary fire detection and alarm plan for USCG approval.

5.3 Attend project status meeting at Ordnance Road Baltimore MD (one (1) meeting) or other location TBD to discuss progress.

5.4 Tentative Schedule

Start: On or about 9 September 2024 Ship Check: TBD Draft Report: TBD Temporary Fire Detection and Alarm Plan: Within 3 days after Ship Check Final Report: TBD

6.0 Acceptance criteria:

6.1 The contractor must provide the above deliverables to the Government as specified. The Government will provide one set of comments on each of the draft and preliminary deliverables for the contractor adjudication or incorporation.

7.0 Government Furnished Documents:

7.1 901 WMEC 436-003, Rev V, Fire & Smoke Detection & Quarterdeck Monitoring System

BLK & IWD

-OR (depending on Cutter class selected)

7.2 905 WMEC 436-003, Rev P, Fire & Smoke Detection & Quarterdeck Monitoring System

BLK & IWD

7.3 901 WMEC 320-035, Rev AT, Electrical One Line Diagram

-OR (depending on Cutter class selected)

7.4 905 WMEC 320-014, Rev AN, Electrical One Line Diagram

7.5 Tech Pub 3365B Fire and Smoke Detection system 270 WMEC (A) and (B) Class Cutters

7.6 SFLC ESD NAME ESS Technical Standard TS-436 Electrical Alarm, Safety and Warning Systems

7.7 SFLC ESD NAME Technical Standard TS-305 Electrical and Electronic Designating and Marking

7.8 SFLC Std Spec 0850 General Requirements for Drawing Preparation

7.9 SFLC Std Spec 0860 General Requirements for Technical Publication

7.10 SFLC Std Spec 3041 Shipboard Electrical Cable Test

7.11 SFLC Std Spec 3042 Shipboard Electrical Cable Removal, Relocation, Splice, Repair, and Installation

8.0 Points of Contact:

8.1 The technical POC at U.S. Coast Guard Surface Forces Logistics Center, Engineering Services Division will be:

a. Ernest Gilcreast 410-762-6431 ernest.j.gilcreast2@uscg.mil

b. Charles McFeaters – 410-762-6292 charles.a.mcfeaters2@uscg.mil

8.2 The MECPL POC will be:

a. Kevin Miller 757-628-4434 kevin.f.miller2@uscg.mil

9.0 Notes:

9.1 File Link: M:\SFLC\IBCT\Major Projects (specific project files to be created)

9.2 Reference files to be provided upon task start

mailto:ernest.j.gilcreast2@uscg.mil

Work Item 2: WMEC 270 Fire Detection System Kit, Provide

1.0 Statement of work

1.1 The Contractor must provide the option to purchase additional 12 shipsets of the fire detection system components, packaged as a kit, in accordance with the Schedule.

1.2 Each kit (i.e. one shipset) must consist of the following components:

• (1) new alarm panel

• (5) remote annunciators

• (9) manual pull stations

• Up to (4) thermal detectors

• (2) IR flame detectors

• Up to (10) ionization smoke detectors for ventilation duct including sampling tubes and housings

• Up to (50) photoelectric smoke detectors

• Up to (13) horns with strobe

• (10) remote alarm lamps

• Up to (3) vibrating bells

• Detector bases/adapters, and all other associated system components

• All software necessary, furnished on CD to conduct any additional programming or system troubleshooting onsite without having to remove any components from system for outside diagnosis

1.3 The components of the kit must be the same as the equipment selected and furnished in Work Item 1. Quantities listed are for bidding purposes. Actual quantities must be adjusted by Class (A or B) based on the completed requirements of Work Item 1. Substitutions are not authorized unless approved by the COR.

2.0 Packaging, Marking and Shipping:

2.1 Installation kits ordered under the Options for this Contract must be packaged in accordance with ASTM D 3951, ASTM D3951-10, and MIL-STD-2073-1E. All parts under this contract shall also have appropriate markings IAW MIL-STD-129P and MIL-STD-130N.

When applicable, specific OEM preservation, packaging, packing, and marking requirements directing a higher standard than referenced shall be adhered to. Bar coding is required in accordance with MIL-STD-129P paragraph 5.1.10.1/page 73 Linear (Code 39) bar code symbology, linear (Code 39) symbols will be IAW ISO/IEC 16388, and ISO/IEC 16388.

Marking shall be placed on the container top or one long side (any side if container is square).

The marking shall be formatted as specified below:

National Stock Number/Activity Control Number (TBD) WMEC 270 Fire Detection System Kit Part Number (as shipped) Contract/Delivery Order Number

SFLC INVENTORY

CONDITION CODE "A"

Quantity: 1 Unit of issue: KT

2.2 Deliver kits to the address listed below:

Surface Forces Logistics Center

2401 Hawkins Point Road Receiving Bldg 88 Baltimore, MD 21226

Work Item 3: Travel and Per Diem

1.0 Statement of work

1.1 The Contractor must submit with their proposal any anticipated travel expenses. For bidding purposes, assume the work will be performed at selected Cutter’s homeport at USCG Base Portsmouth, Portsmouth, VA. Travel to locations other than USCG Base Portsmouth will be addressed by Change Request.

1.2 Travel and per diem will be reimbursed in accordance with the Joint Travel Regulations

(JTR).

Attachment 1 - Fire Detection System Test Procedure

Test Detectors

1. Test each detector listed in the Data Sheet. Contractor must submit a CFR for any discrepancies in the Data Sheet (incorrect locations, incorrect detector type in the space, etc) and provide a “red-line” markup of the corrected Data Sheet. Do not record “UNSAT” data.

Any discrepancies must be corrected and retested prior to signing off as “SAT”.

a. An ionization or photoelectric detector may be activated by blowing smoke into it or introducing an acceptable aerosol slightly away from the chamber.

b. A thermal detector may be activated by an electric heat gun.

c. A flame detector may be activated by holding the flame of a cigarette lighter slightly below or in front of the lens or by producing and infrared light from an IR source into the detector lens.

2. To test the system, activate a detector or manual pull station. Record each detector and device tested on the attached Data Sheets. Verify the following:

a. All audible devices sound and can be silenced from remote annunciators and from the main fire alarm panel.

b. System alarm lamp illuminates.

c. Proper zone lamp illuminates at the zone module and the remote annunciators.

d. Fire Detection System General Alarm activates.

3. Acknowledge alarm.

a. Acknowledge the alarm at the annunciator (without silencing the alarm at the main fire panel).

b. Acknowledge alarm at the alarm panel.

4. Reset the main fire alarm panel.

a. Allow time for the smoke to clear out of the detector sensor or for the thermal fire detector to cool down.

b. Reset alarm panel.

c. Verify on the remote annunciator that the corresponding red LED is not illuminated over the zone for the zone detector sensor being tested.

d. Verify on the main fire alarm panel that the corresponding zone is not illuminated.

5. Record results in Data Sheets below.

Fire Detection and Alarm System Test Data Sheet Zone 1

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ib le

A la rm

Audible alarm (with strobe)

Sm ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-

-0 nn un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-

-L

Pa ss ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o nl y)

En gi ne R oo m

(Q ty w ith

B el l, B

-C la ss o

JP

-5

P um p R oo m

Example X X J. Smith 2/16/24

Pilothouse 02-48-0-C X

Passage 02-63-2-L X

XO Stateroom 01-47-2-L X

CO Stateroom 01-47-5-L X

Passage 01-52-0-L X X

P-Way 01-52-0-L in Exh Vent

E02-58-2 X

EO Stateroom 01-58-2-L X

Ward Rm Stateroom 01-68-0-L

X

Zone 1

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Ward Rm Stateroom 01-68-3-L

X

Ward Rm Stateroom 01-68-4-L

X

A-Class Only:

Passage

01-68-01-L

(x2) X X

B-Class Only:

Passage

01-68-01-L X X

Passenger Stateroom 01-82-0-L

X

Ward Rm Stateroom 01-84-2-L

X

Ward Rm Stateroom 01-85-0-L

X

Crew Locker Rm 1-58-1-L X

Engr Office/DC Central

1-73-1-Q

Zone 1

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

A-Class Only:

Passage 1-47-0-L

X

B-Class Only:

Passage 1-47-0-L

X

A-Class only: P- Way 1-47-0-L in Exh Vnt E02-56-

X

A-Class only: P- Way 1-47-0-L in Exh Vnt E02-58-

X

B-Class only: P- Way 1-47-0-L in Exh Vnt E02-57-

X

B-Class only: Lkr 1-56-1-Q in Exh Vent E02-53-1

X

Crew Berthing 1-61-2-L X

Passage 2-56-0-L (fwd) X X

A-Class only: P- Way 2-56-0-L in Exh Vnt E02-58-

Zone 1

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

B-Class only: P- Way 2-56-0-L in Exh Vnt E02-57-

X

IC Room 2-47-1-C X

Crew Berthing 2-47-0-L X

Crew Locker Rm 2-59-4-L X

Crew Lounge 2-72-2-L X

A-Class Only:

Passage

2-56-0-L (aft) X X

B-Class Only:

Passage

2-56-0-L (aft) X

Crew Locker Rm 2-64-1-L X

Crew Berthing 2-66-1-L X

Zone 2

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Passage 1-186-01-L X

CPO Stateroom 1-199-0-L X

CPO Stateroom 1-199-2-L X

Eng Stores 1-186-2-A X

CPO Stateroom 1-177-0-L X

CPO Stateroom 1-165-4-L X

CPO Stateroom 1-165-2-L X

Passage 1-165-0-L X X

Zone 2

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

CPO Lounge 1-165-3-L X

Dispensary 1-179-1-L X

Crew Lounge 2-186-1-L X

Crew Locker Rm 2-194-0-L X

Crew Berthing 2-186-4-L X

Crew Lounge 2-165-2-L X

Crew Locker Rm 2-175-0-L X

Crew Berthing 2-165-3-L X

Zone 3

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Flammable Liquid Stores

1-J-0-KL

X X

Zone 4

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Magazine 1-26-0-M X X

Zone 5

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Trash Compactor Space

1-186-3-Q

Zone 6

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Ordnance Workshop 2-40-1-Q

Zone 7

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Aux Machinery Space No.1 2-82-0-E

X

Aux 1 2-82-0-E in Exh Vent E02-107-1

(x2)

Zone 8

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Engine Room 3-103-0-E

(x3) X

Zone 9

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Small Arms Magazine 2-214-2-M

Zone 10

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

A-Class only:

Steering Gear

Rm 3-228-0-E

(x2) X

B-Class only:

Steering Gear

Rm 3-228-0-E

Zone 11

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

A-Class only:

CPO Bag 2-40-2- A in Exh Vnt E1-

46-2 X X

A-Class only: 3- 40-2-A in Exh Vnt E1-46-2

X X

B-Class only:

CPO Bag 2-40-2- A in Exh Vnt E1-

45-2 X X

B-Class only: 3- 40-2-A in Exh Vnt E1-45-2

X X

Bosun Stores 2-17-0-A X

Zone 12

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Comm Ctr 3-47-0-C

Zone 13

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Refrigerated & Dry Stores 4-169-0-A

Zone 14

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

JP-5 Pump Room 4-186-0-J X X

Zone 15

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

CSC 02-63-0-C

in Exh Vent

E02-58-2 X

CSC 02-63-0-C

in Recirc Vent

R02-117-1

Zone 16

Location

Fire Detection/Alarm

System Appliance being tested

Alarm Type ( for satisfactory alarm operation and proper Zone indicated on all annunciators)

Signature and date for SAT appliance operation

B el l

A ud ok e D et ec to r

IR

F la m e D et ec to r

Th er m al

D et ec to r

Pu ll

St at io n

R em ot e

A la rm L am p

A nn un ci at or

, P ilo t H ou se

2-un ci at or

, Q ua rte rd ec k

A nn un ci at or

, H el o H an ga r 0 1-

7-

0- L

A nn un ci at or

, V es tib ul e

-4 7-

1- L

A nn un ci at or

, V es tib ul e 1-

7-

1- L

Pa ss ag e

-6

8-ag e

1-ag e

1-

5- 0-

L

Pa ss ag e

2-ag e

2-

0- 0-

L

A ux

M ac hi n

Sp ac es (w ith B el l, B -C la ss o ne R oo m

(Q ty w ith

B el l, B

-C la ss o

P um p R

Elec Eqpt Space & Strm

02-108-0-Q