Special Packaging Instructions_SPI-F01-153-2154.pdf

PDF 859 KB Posted Mar 26, 2025

Attached to: Fuel Cell Federal contract opportunity
Solicitation number: SPRHA4-25-R-0425
Issued by: Defense Logistics Agency Aviation

About this file

Written by GovTribe AI · Mar 26, 2025

This Special Packaging Instruction (SPI) document provides detailed instructions for packaging an Aircraft Fuel Cell (NSN 1560-01-153-2154) for military preservation and transportation. The document specifies two packaging levels (Level A and Level B) with precise requirements for packing, marking, closure, and handling of the fuel cell, including specific instructions for wood packaging material compliance with international phytosanitary standards.

Key technical details include heat treatment requirements (56 degrees Centigrade for 30 minutes), debarking of wooden packaging materials, specific container dimensions (57-59 1/8" length, 43-45 1/8" width, 48-53 5/8" depth), and critical handling notes. Special markings and cautions emphasize hazardous material handling, with specific instructions such as using four corner strap hangers to lift the fuel cell, avoiding puncturing the box, and conducting annual inspection and testing. The document is marked with Distribution Statement D, limiting access to DoD and U.S. DoD contractors for administrative or operational use.

View the file

Other files for this federal contract opportunity

Other files attached to Fuel Cell, newest first.
File	Type	Posted
First Article Test Report.pdf	PDF	Mar 26, 2025
Enginering Data List.pdf	PDF	Mar 26, 2025
Engineering Data Requirements.pdf	PDF	Mar 26, 2025
Unmarked Eng Data 2022.pdf	PDF	Mar 26, 2025
SPRHA425R0425 CUI SSI.pdf	PDF	Mar 26, 2025
Manufacturing Qualification Requirements.pdf	PDF	Mar 26, 2025

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 19 JUNE 2019. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406 SCMS/GULAA, (PACKAGING

DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

ITEMS CONTAINING RESIDUAL FUEL ARE

CONSIDERED HAZARDOUS MATERIALS AND MUST

BE PACKED IAW THE APPROPRIATE HAZARDOUS

MATERIAL REGULATION AND CERTIFIED BY

AUTHORIZED HAZARDOUS MATERIAL PERSONNEL

CAUTION:

AutoCAD SHX Text

66 LBS

AutoCAD SHX Text

ITEM WT.

AutoCAD SHX Text

2169 MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

CLOSURE

AutoCAD SHX Text

IAW: ASTM D6251 UNNAILED CLOSURE

AutoCAD SHX Text

IAW: ASTM D6251 UNNAILED CLOSURE

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPI NO. F01-153-2154

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text 98747

AutoCAD SHX Text

DESIGN FRAGILITY G

AutoCAD SHX Text

SPEC STYLE TYPE CL VRTY GR TR

AutoCAD SHX Text

AS SPECIFIED BELOW AND BILL OF MATERIALS

AutoCAD SHX Text

ILL.

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

CURRENT

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

A) SPI NO. F01-153-2154

AutoCAD SHX Text

PRESERVATIVE: N/A

AutoCAD SHX Text

UNSERVICEABLE METHOD: 10

AutoCAD SHX Text

CLEANING & DRYING: IAW MIL-STD-2073

AutoCAD SHX Text

MILITARY PRESERVATION IAW MIL-STD-2073

AutoCAD SHX Text

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

AutoCAD SHX Text

MARKING IAW MIL-STD-129

AutoCAD SHX Text

QUP

AutoCAD SHX Text

ICQ

AutoCAD SHX Text

CNTR O.D.

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

ITEM DIM

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

CNTR I.D.

AutoCAD SHX Text

LEVEL B:

AutoCAD SHX Text

LEVEL A:

AutoCAD SHX Text

GROSS WT LBS

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

PACKING

AutoCAD SHX Text

LEVEL

AutoCAD SHX Text

GROSS CU FT

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

ASTM D6251 (MOD)

AutoCAD SHX Text

ASTM D6251 (MOD)

AutoCAD SHX Text

REV

AutoCAD SHX Text

DATE

AutoCAD SHX Text

ORIGINAL

AutoCAD SHX Text

CHK.

AutoCAD SHX Text

AUTH.

AutoCAD SHX Text P.S.

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text 45 1/8

AutoCAD SHX Text

AutoCAD SHX Text 59 1/8

AutoCAD SHX Text

AutoCAD SHX Text 53 5/8

AutoCAD SHX Text

LENGTH WIDTH DEPTH

AutoCAD SHX Text

LEVEL A LEVEL B

AutoCAD SHX Text 82.796

AutoCAD SHX Text A

AutoCAD SHX Text

III

AutoCAD SHX Text 82.796

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 1 OF 5

AutoCAD SHX Text

K. KNIGHTON K. RESTORFF S. PEELER N. CORONADO

AutoCAD SHX Text

1560-01-153-2154 WF

AutoCAD SHX Text 320-4-45550-103

AutoCAD SHX Text

CELL, FUEL, AIRCRAFT

AutoCAD SHX Text F01-153-2154

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text G

AutoCAD SHX Text 85258

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LTR

AutoCAD SHX Text

DATE

AutoCAD SHX Text

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

AutoCAD SHX Text

III

AutoCAD SHX Text

SERVICEABLE METHOD: 10

AutoCAD SHX Text

C) NOT FOR OUTSIDE STORAGE, CLIMATE CONTROL

AutoCAD SHX Text G

AutoCAD SHX Text ADDED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE, UPDATED ADDITIONAL MARKINGS AND BOM

AutoCAD SHX Text 19175

AutoCAD SHX Text

REQUIRED (SEE PAGE 4 FOR MORE MARKINGS)

AutoCAD SHX Text

A) DANGEROUS GOODS IN APPARATUS, UN3363

AutoCAD SHX Text

B) TYPE AND FLASH POINT OF FUEL

AutoCAD SHX Text

C) CLASS 9 LABEL

AutoCAD SHX Text

ADDITIONAL SPECIAL MARKINGS:

AutoCAD SHX Text

SPECIAL MARKINGS:

AutoCAD SHX Text

ADDITIONAL SPECIAL MARKINGS:

REQD

AutoCAD SHX Text P/N

AutoCAD SHX Text

QTY

AutoCAD SHX Text SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

SPECIFICATION

AutoCAD SHX Text

MATERIAL

AutoCAD SHX Text 3 1 A/R A/R A/R 15 A/R 2 2 3 2 2

AutoCAD SHX Text STRAPPING, STEEL SUPPORT, CENTER TAPE, PACKAGING WRAP, COVER CORD, NYLON SCREW, EYE PAD, SORBENT LINER, END LINER, SIDE SKID SUPPORT, TOP LINER, TOP & BOTTOM

AutoCAD SHX Text 3/4 X .015 X AS REQUIRED 1 X 4 (NOM) X 42 5/8 3 X AS REQUIRED AS REQUIRED AS REQUIRED #9 AS REQUIRED 42 1/2 X 47 1/2 X 1/8 56 7/8 X 47 1/2 X 1/8 4 X 4 (NOM) X 45 1/8 12 X 12 X 1/2 56 3/4 X 47 3/4 X 1/8

AutoCAD SHX Text ASTM D3953 TYPE 1, RD, FINISH A ASTM D6199 CLASS 2 ASTM D5486 TYPE I OR V MIL-PRF-121 TYPE II MIL-C-5040H TYPE III FF-S-88 CLASS 1, GRADE A, TABLE I A-A-59759 TYPE II ASTM D4727 CF, DOM, SW, GRADE 200 ASTM D4727 CF, DOM, SW, GRADE 200 ASTM D6199 CLASS 2 ASTM D4727 CF, DOM, TW, GRADE 700 ASTM D4727 CF, DOM, SW, GRADE 200

AutoCAD SHX Text -12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 2 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text F01-153-2154

AutoCAD SHX Text

CELL, FUEL, AIRCRAFT

AutoCAD SHX Text

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

NOTES

1. I.D. TAGS (I.E. CONDITION TAGS, AFTO FOR 20 OR LOCALLY PRODUCED DOCUMENTS) MUST BE STAMPED BY CERTIFIED

PERSONNEL AS DRAINED AND PURGED.

2. MARK TYPE AND FLASH POINT OF PURGING FLUID IAW AFI 24-602v2 AND AFMAN 24-204.

3. LINE BOTTOM OF CONTAINER ENTIRELY WITH SORBENT MATERIAL, REF.-6. SORBENT MATERIAL MUST BE INSPECTED

PRIOR TO REUSE FOR RIPS OR SOILED MATERIAL.

4. CAUTION: DO NOT USE NAILS TO SECURE BOX LID; USE STRAPPING REF.-12 ONLY.

5. CENTER ITEM IN CONTAINER AND SECURE WITH REF.-7 AND REF.-8 AS ILLUSTRATED.

6. ENSURE PROTECTIVE DEVICE IS ON ACCESS DOOR PRIOR TO PACKAGING CELL.

NOTES CONTINUED ON PAGE 4

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE

REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 5: LEVEL A PROTECTION REQUIRED TO MEET THE MOST SEVERE WORLDWIDE SHIPMENT, HANDLING, AND

STORAGE CONDITIONS. EXAMPLES OF SITUATIONS ARE: WAR RESERVE MATERIAL, MOBILIZATION, STRATEGIC AND

THEATER DEPLOYMENT, OPEN STORAGE AND DECK LOADING. SECURITY ASSISTANCE ITEMS, INCLUDING FMS, ARE

ESPECIALLY SUSCEPTIBLE TO DAMAGE DUE TO UNKNOWN AND UNFAVORABLE TRANSPORTATION, CLIMATIC, AND

STORAGE CONDITIONS. PROVIDE LEVEL B PACKING UNLESS OTHERWISE DIRECTED BY THE PROCURING COUNTRY.

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 3 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-153-2154

CELL, FUEL, AIRCRAFT

NOTES CONTINUED

7. WRAP LOOSE ACCESSORIES (WHEN PROVIDED) WITH PPP-C-1797 TYPE I OR EQUAL. SECURE TO BOTTOM OF

CONTAINER WITH ASTM D5330 TYPE I OR II FILAMENT TAPE.

8. SECURE REF.-11 TO THE UNDERSIDE OF THE LID WITH 4d NAILS CONFORMING TO ASTM F1667.

9. COVER ALL ACCESS HOLES WITH REF.-9 AND SECURE WITH REF.-10.

10. SECURE REF.-1, -4 AND -5 TO CONTAINER WITH ADHESIVE A-A-59692 TYPE II OR EQUAL.

11. CUT TOP SUPPORT, REF.-2, TO ATTACH TO TOP LINER, REF.-1. SECURE WITH ADHESIVE A-A-1936 TYPE II OR EQUAL.

SEE DETAIL A

12. WRAP REF.-11 WITH REF.-9 PRIOR TO SECURING TO LID OF CONTAINER.

13. ATTENTION: WHEN REMOVING ITEM, USE FOUR CORNER STRAP HANGERS TO LIFT FUEL CELL OUT OF CONTAINER.

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 4 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-153-2154

AutoCAD SHX Text

CELL, FUEL, AIRCRAFT

AutoCAD SHX Text

D) TO OPEN: CUT STRAPS AND REMOVE LID.

AutoCAD SHX Text

E) RUBBER CELL, USE NO HOOKS, DO NOT PUNCTURE BOX

AutoCAD SHX Text

WITH NAILS, STAPLES, ETC.

AutoCAD SHX Text

F) DO NOT REMOVE OR FLEX CELL WHEN AMBIENT

AutoCAD SHX Text

TEMPERATURES IS BELOW 18.3%%DC OR 65%%DF

AutoCAD SHX Text

G) ANNUAL INSPECTION AND TESTING REQUIRED

AutoCAD SHX Text

SPECIAL MARKINGS CONTINUED:

DETAIL A

AutoCAD SHX Text

AutoCAD SHX Text -9

AutoCAD SHX Text -10

AutoCAD SHX Text -8

AutoCAD SHX Text -12

AutoCAD SHX Text -3

AutoCAD SHX Text -7

AutoCAD SHX Text

CUTTING LINE

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text -1

AutoCAD SHX Text -11

AutoCAD SHX Text -9

AutoCAD SHX Text -2

AutoCAD SHX Text -5

AutoCAD SHX Text -4

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

TYP

AutoCAD SHX Text

2169C MOD

AutoCAD SHX Text

MARCH 87

AutoCAD SHX Text

FORM

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

SHEET 5 OF 5

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text 98747

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text F01-153-2154

AutoCAD SHX Text

CELL, FUEL, AIRCRAFT

AutoCAD SHX Text

DETAIL A

AutoCAD SHX Text

ITEM REFERENCE

AutoCAD SHX Text

File details come from the government source that posted it. Updated Mar 26, 2025.