Special Packaging Instructions.pdf

PDF 453 KB Posted

Attached to
A-10 Aircraft Access Door Federal contract opportunity
Solicitation number
FA8212-22-Q-0003
Issued by
Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

This document contains packaging instructions and specifications for wood materials used in shipping items to comply with plant pest and disease regulations. The instructions specify that all wood lumber, pallets, and containers used for packaging and shipping must be constructed from debarked wood that has been heat treated to a minimum temperature of 56 degrees Celsius for 30 minutes. This treatment and certification from an accredited agency is required under the International Standards for Phytosanitary Measures to prevent the spread of invasive species such as pinewood nematode. Specific packing and sealing procedures are also provided to ensure safe transport of shipped materials.

View the file

Other files for this federal contract opportunity

Other files attached to A-10 Aircraft Access Door, newest first.
File Type Posted
IUID Checklist.pdf PDF
Engineering Data Requirements.pdf PDF
Item Description.pdf PDF
Packaging Requirements.pdf PDF
00_FA8212-22-Q-0003.pdf PDF
Engineering Data List.pdf PDF
Packaging SoW.pdf PDF
CDRLs.pdf PDF
Transportation Data for Solicitations.pdf PDF
Form 260 First Article Requirements.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE. DECEMBER 19 2017. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406

SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.

DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.

CAUTION NOTICES

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD

PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE

PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND

COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE

(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD

PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF

HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).

CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS

COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR

PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

NOTES

1. WRAP ITEM WITH REF.-2, SECURE WITH TAPE, REF.-3. CUSHION AS REQUIRED WITH REF.-1 TO INSURE A SNUG FIT.

SEAL BOX WITH TAPE, REF.-4

File details come from the government source that posted it. Updated .