Special Packaging Instructions - AK16223891.pdf

PDF 2 MB Posted Nov 6, 2023

Attached to: Engine Diesel Federal contract opportunity
Solicitation number: SPRDL1-23-R-0157
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Dec 21, 2023

This document provides special packaging instructions for an engine diesel assembly in response to solicitation SPRDL1-23-R-0157 issued by the Defense Logistics Agency Land and Maritime. Key details include specifications for preservation, packaging, unitization and marking of an engine assembly designated as national stock number 2815-01-662-3891. Specific requirements outlined include methods for preserving the engine's fuel system, cylinders, and oil system using vapor corrosion inhibitors. Instructions also provide drawings and bills of materials for fabricating brackets, blocking and bracing to secure the engine in an envelope, container and on a pallet for shipment.

View the file

Other files for this federal contract opportunity

Other files attached to Engine Diesel, newest first.
File	Type	Posted
SPRDL123R0157.pdf	PDF	Nov 6, 2023

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 16 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

XCL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 1338.0 65.844 53.3 X 43.3 X 49.3

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1E, METHOD 53 SEE NOTES FOR PACKAGING DETAILS

13. CLEANING

MIL-STD-2073-1E

14. DRYING

MIL-STD-2073-1E

15. PACKING

a. LEVEL A

MIL-STD-2073-1E AND NOTE P

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE Q

17. NOTES / DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. THE FOLLOWING ITEMS ARE INCLUDED WITH PART NUMBER EP-001486 ENGINE ASSEMBLY, DIESEL.

C. THE ITEMS IDENTIFIED IN THE TABLE SHALL BE PREPARED IN ACCORDANCE WITH THE

REQUIREMENTS BELOW:

SEGREGATED

PACK NUMBER

PART NUMBER DESCRIPTION QTY.

1 CC-0010918 RESISTOR 2

2 EP-0010626 FILTER ASSY 1

SPN 1 P/N: CC-0010918 RESISTOR QTY: 1

1. CUSHIONING: A-A-59135, CL 1, GR A, SIZE: 6 X 6 X ¼” THICKNESS, WRAP ITEM IN FOAM AND

SECURE WITH TAPE.

2. BAG: MIL-DTL-117, TYPE III, CL B, ST 2, SIZE: 4 X 6. PLACE ITEM IN BAG AND CLOSE BY HEAT

SEAL OR TAPE.

3. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 1“.

4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1E, CRITERIA FOR PRESERVATION

METHOD 10.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

17. NOTES / DRAWING

SPN 2 P/N: EP-0010626 FILTER ASSY QTY: 1

1. CUSHIONING: ASTM D4727, TY CF, CL WR, GR V11c, VR DW, SIZE: 35 X 35, QTY 2.

2. PLACE ONE CUSHIONING ON TOP AND ONE ON BOTTOM OF FILTER, SECURE WITH TAPE.

3. WRAP: MIL-PRF-121, TY II SIZE: 80 X 46. WRAP ITEM ENTIRELY AND SECURE WITH TAPE.

4. IDENTIFICATION: IDENTIFY THE ITEM WITH “SEGREGATED PACK NUMBER 2”.

5. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1E, CRITERIA FOR PRESERVATION

METHOD 10.

CONSOLIDATION: CONSOLIDATE SPN 1 & 2 IN ACCORDANCE WITH THE FOLLOWING;

1. CONTAINER: ASTM D5118, TY CF, ST RSC, CL WR, GR 275, VR SW, SIZE: AS REQUIRED. CLOSE

CONTAINER IN ACCORDANCE WITH ASTM D1974, METHOD 2B3.

2. IDENTIFICATION: IDENTIFY CONTAINER WITH “THIS CARTON CONTAINS SEGREGATED PACK

NUMBERS 1 & 2.

3. INSPECTION: INSPECT IN ACCORDANCE MIL-STD-2073-1E, CRITERIA FOR PRESERVATION

METHOD 10.

D. SPECIAL EQUIPMENT REQUIRED FOR ENGINE PRESERVATION (SEE PAGE 6):

1. ONE (1) PRESERVATIVE SUPPLY HOSE, APPROXIMATELY 24” IN LENGTH, OF WHICH ONE END SHALL BE EQUIPPED WITH A FITTING THAT WILL MATE WITH THE FUEL INLET FITTING LOCATED ON THE

FUEL PUMP.

2. ONE (1) PRESERVATIVE RETURN HOSE, 3/8” I.D. AND APPROXIMATELY 24” IN LENGTH, OF WHICH ONE END SHALL BE EQUIPPED WITH A FITTING THAT WILL FIT THE FUEL RETURN LINE OUTLET.

3. ONE (1) 24 VOLT D.C. POWER SUPPLY TO POWER THE STARTER MOTOR WITH SWITCH TO

ENGAGE/DISENGAGE THE STARTER SOLENOID.

4. ONE STARTER MOTOR (PERKINS P/N266-30202)

5. ONE (1) SLAVE FUEL FILTER (PERKINS P/N 26560201).

6. ONE (1) SLAVE OIL FILTERS (PERKINS P/N 26544-7).

7. ONE (1) AIR COMPRESSOR (MAX 15 PSI) WITH A SPRAYER ATTACHMENT ABLE TO PROVIDE SPRAY

AND FOG PATTERNS.

8. ONE (1) 5 GALLON PAIL OR EQUIVALENT FOR PRESERVATIVE DRAINAGE.

E. THE FOLLOWING PROCEDURE DESCRIBES THE APPROVED METHOD FOR PRESERVATION OF THIS

ENGINE:

• ANY DEVIATION FROM THIS PROCEDURE SHALL BE PRE-APPROVED BY TACOM AND THE

ENGINE MANUFACTURER.

1. INSTALL SLAVE STARTER MOTOR (P/N 266-30202) TO FLYWHEEL COVER USING SUPPLIED

HARDWARE.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

17. NOTES / DRAWING

2. REPLACE FUEL FILTER (P/N 26560201) AND OIL FILTERS (P/N 26544-7) WITH SLAVE FILTERS. SET ORIGINAL FILTERS ASIDE TO BE RE-INSTALLED AFTER PRESERVATION PROCESS IS COMPLETE (SEE

PAGE 7).

3. FILL PRESERVATIVE PUMP WITH ONE (1) GALLON OF PRESERVATIVE CONFORMING TO MIL-PRF-

21260E, TYPE PE-10. ATTACH PRESERVATIVE SUPPLY HOSE TO PRESERVATIVE PUMP OUTLET.

4. REMOVE CAP FROM FUEL PUMP INLET HOUSING, INSTALL PRESERVATIVE SUPPLY HOSE FROM

PRESERVATIVE PUMP TO FUEL INLET (SEE PAGE 7).

5. REMOVE CAP FROM FUEL RETURN LINE, ATTACH PRESERVATIVE RETURN HOSE, POSITION HOSE

OVER PRESERVATIVE DRAINAGE CONTAINER (SEE PAGE 7).

6. PUMP ONE (1) GALLON OF PRESERVATIVE MIL-PRF-21260E, TYPE PE-10, THROUGH FUEL SYSTEM

ALLOWING EXCESS TO DRAIN INTO CONTAINER.

• DO NOT REUSE PRESERVATIVE.

7. REMOVE SUPPLY LINES AND RE-CAP BOTH THE FUEL PUMP INLET AND THE FUEL RETURN LINES.

8. FILL ENGINE CRANK CASE TO OPERATIONAL LEVELS USING A VCI OIL MIXTURE THAT CONSISTS OF

50% VCI OIL CONFORMING TO MIL-P-46002A AND 50% MANUFACTURER’S RECOMMENDED ENGINE

OIL (SEE PAGE 7).

9. CONNECT STARTER TO 24 VOLT POWER SUPPLY (SEE PAGE 9).

10. REMOVE FLYWHEEL COVER AND FOG APPROXIMATELY 2ml OF A VCI OIL MIXTURE, CONSISTING OF

50% VCI OIL CONFORMING TO MIL-P-46002A AND 50% MANUFACTURER’S RECOMMENDED ENGINE

OIL, ON THE FLYWHEEL AND RING GEAR TEETH (SEE PAGE 7).

11. REMOVE CAP FROM TURBO CHARGER EXHAUST PORT, FOG WITH 1ml OF A VCI OIL MIXTURE, CONSISTING OF 50% VCI OIL CONFORMING TO MIL-P-46002A AND 50% MANUFACTURER’S

RECOMMENDED ENGINE OIL. (SEE PAGE 8).

12. REMOVE CAP FROM TURBO CHARGER INTAKE PORT, SPRAY OR FOG APPROXIMATELY 12-15 ml OF A

VCI OIL MIXTURE, CONSISTING OF 50% VCI OIL CONFORMING TO MIL-P-46002A AND

50%MANUFACTURER’S RECOMMENDED ENGINE OIL (SEE PAGE 8).

13. CYCLE THE ENGINE USING THE STARTER UNTIL 36 - 45 ml OF VCI OIL MIXTURE HAS BEEN FOGGED OR SPRAYED INTO THE TURBO CHARGER INTAKE PORT, 12 – 15 ml AT A TIME.

• DO NOT CYCLE FOR MORE THAN 5 SECONDS ALLOWING THE STARTER TO REST 30 SECONDS

BETWEEN CYCLES.

14. REMOVE POWER SUPPLY.

15. REPLACE SLAVE FUEL AND OIL FILTERS WITH THE ORIGINAL FILTERS.

16. REMOVE SLAVE STARTER MOTOR.

17. DRAIN OIL FROM CRANKCASE, REPLACE DRAIN PLUG, TORQUE TO 25LB/FT (SEE PAGE 8)

18. REPLACE ANY REMOVED CAPS AND PLUGS.

19. CAP BREATHER TUBE WITH 3 X 5 POLY BAG SECURE WITH TAPE (SEE PAGE 7).

20. COOLING SYSTEM: IT IS ASSUMED THIS ENGINE, IF NEW, HAS BEEN PREVIOUSLY RUN WITH

COOLANT UTILIZING NON-CHROMATE INHIBITORS BY THE MANUFACTURER. THEREFORE, THE

COOLING SYSTEM PRESERVATION IS NOT REQUIRED.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

17. NOTES / DRAWING

• THIS COMPLETES THE STEPS FOR ENGINE PRESERVATION REQUIRED PRIOR TO PACKAGING.

F. ENSURE ALL OPENINGS TO ENGINE INTERIOR ARE SEALED WITH CAPS/PLUGS IN ACCORDANCE WITH

NAS-847 OF THE APPROPRIATE SIZE.

G. BRACKETS SHALL BE FABRICATED FROM COMMERCIAL GRADE 1/2" THICK PLATE STEEL. BRACKETS SHALL BE FORMED BY BENDING, NOT WELDING AND SHALL BE PAINTED, PLATED OR PRESERVED

USING MIL-PRF-16173, GR 4. SEE PAGES 10 - 16 FOR BRACKET DRAWINGS AND PLACEMENT.

H. ALL HARDWARE SHALL BE COMMERCIAL GRADE AND BE PAINTED, PLATED OR PRESERVED USING

MIL-PRF-16173, GR 4. SEE PAGES 10 & 11 FOR SIZES AND LOCATION.

I. FABRICATE BLOCKING/BRACING IN ACCORDANCE WITH ASTM D6199, CLASS 3. SEE PAGES 10 - 16 FOR

SIZES AND ORIENTATION. ALL SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED.

J. WRAP ENGINE ENTIRELY IN GREASE PAPER, IN ACCORDANCE WITH MIL-PRF-121, TY II, SIZE: 168 X 60

AND SECURE WITH TAPE.

K. APPLY CUSHIONING AROUND THE ENGINE TO PREVENT PUNCTURING THE FOIL ENVELOPE MATERIAL, IN ACCORDANCE WITH A-A-59135 CL 1, GR A, SIZE: 168 X 60 X ¼” THK AND SECURE WITH TAPE.

L. PLACE 96 UNITS OF DESICCANT IN ACCORDANCE WITH MIL-D-3464, TY II WITHIN THE FOIL ENVELOPE, BENEATH OIL PAN, BEFORE SEALING BAG.

M. ENVELOPE FABRICATION SHALL BE IN ACCORDANCE WITH SPECIFICATION MIL-DTL-6060, SIZE 165 X 90.

MATERIAL USED FOR FABRICATION OF GASKETS SHALL CONFORM TO SPECIFICATION ASTM F 104.

GASKETS SHALL BE CEMENTED TO EACH SIDE OF THE BAG AT THE MOUNTING LOCATION USING MMM-

A-260 ADHESIVE OR COMMERCIAL EQUIVALENT. AFTER POSITIONING BARRIER OVER BOLTS, A

SUFFICIENT QUANTITY OF ADHESIVE SHALL BE APPLIED AROUND BOLT AND GASKET TO PROVIDE AN

AIRTIGHT SEAL.

N. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES C AND E IN ACCORDANCE WITH THE FOLLOWING:

1. SPN PLACEMENT: ATTACH SPN 1 & 2 CONSOLIDATION CONTAINER FROM NOTE C, TO BASE USING

TAPE. SEE PAGE 16

2. ATTACH ENGINE ASSEMBLY DIESEL TO BASE USING HARDWARE. SEE PAGE 11.

3. HARDWARE: ALL HARDWARE SHALL BE COMMERCIAL GRADE AND BE PAINTED, PLATED OR

PRESERVED USING MIL-PRF-16173, GR 4. SEE PAGES 3 - 10 FOR SIZES AND LOCATION.

4. BLOCKING/BRACING: ASTM-D6199, CL 3, SEE PAGES 13 – 18 FOR SIZES AND ORIENTATION.

5. CONTAINER: ASTM-D7478 CL 2, ST 7, SIZE: 46 X 41 X 38, CLOSE CONTAINER IN ACCORDANCE WITH

ASTM-D7478 USING 5/16” X 3” LAG SCREWS FASTENED INTO SKID MEMBERS.

6. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.

O. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION ASTM-D7478.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

17. NOTES / DRAWING

P. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

Q. SPECIAL MARKING SHALL BE APPLIED AS FOLLOWS:

1. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP

AND SIDES WITH MINIMUM 1/2 INCH HIGH BLACK LETTERS "REUSABLE CONTAINER, DO NOT

DESTROY". IN ADDITION, THE TOP AND ENDS SHALL BE MARKED "REMOVE LAG SCREWS TO

OPEN CONTAINER" USING 1/2 INCH HIGH BLACK LETTERS.

2. SECURE WARNING TAG (S) IN A CONSPICUOUS LOCATION ON THE ENGINE TO STATE, “ENGINE OIL

SYSTEM PRESERVED. ENGINE FUEL SYSTEM AND CYLINDERS PRESERVED. BEFORE CRANKING,

REMOVE ALL CAP/PLUGS AND TAPE AND ADD PROPER OPERATIONAL LUBRICANT TO

CRANKCASE”.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

17. NOTES / DRAWING

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 9 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 10 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

17. NOTES / DRAWING

PACKAGING BILL OF MATERIAL

ITEM SIZE QTY. REFERANCE

A 2 X 8 X 57-3/4 (NOMINAL) 2 ASTM D6199

B 2 X 6 X 24 (NOMINAL) 2 ASTM D6199

C 8 X 26 GASKET MATERIAL 2 ASTM F104

D 16-1/2" "L" BRACKET 2 SEE DRAWING ON PAGE 15

E 12" NOTCHED "L" BRACKET 1 SEE DRAWING ON PAGE 15

F 12" "L" BRACKET 1 SEE DRAWING ON PAGE 15

G M12 - 1.75" X 90MM HARDWARE SET 2 HARDWARE SET CONSISTS OF: (1) M12 - 1.75"

X 90MM HEX BOLT & (1) M12 LOCKWASHER.

H M12 - 2.00 HARDWARE SET 4 HARDWARE SET CONSISTS OF: (1) M12 - 2.00"

NUT & (1) M12 LOCKWASHER.

I M12 - 1.75" X 45MM HARDWARE SET 2 HARDWARE SET CONSISTS OF: (1) M12 - 1.75"

X 45MM HEX BOLT & (1) M12 LOCKWASHER.

J 1/2 X 1-1/2 STEEL SPACER 4 MCMASTER-CARR P/N: 92415A156

K 1/2 X 6 HARDWARE SET 4

HARDWARE SET CONSISTS OF: (1) 1/2" X 6"

CARRAGE BOLT, (1) 1/2 FLAT WASHER (1) 1/2

LOCK WASHER & (1) 1/2" NUT

L 165 X 90 ENVELOPE (FLAT LAYOUT) 1 MIL-DTL-6060

M 8 X 31-1/2 GASKET MATERIAL 2 ASTM F104

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 11 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 12 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 13 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 14 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

ITEM IDENTIFICATION

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 15 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

BRACKET DIMENSIONS

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 16 of 16 Pages

OMB No. 0704-0188

XCL

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

EP-0011486 (1NWY2) ENGINE ASSEMBLY, DIESEL 19207 AK16223891

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2815-01-662-3891 8 NOV 2022 C

(NOTE N)

File details come from the government source that posted it. Updated Nov 6, 2023.