Special Packaging Instructions 014699893.pdf
PDF 257 KB Posted
- Attached to
- Transfer Transmission Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-23-R-0101
About this file
This special packaging instruction document outlines the packaging requirements for a transfer transmission assembly being solicited by the Defense Logistics Agency Land and Maritime under solicitation number SPRDL1-23-R-0101. Key details include specifications for preservation, cleaning, drying, packing, cushioning, desiccant, container, and marking of the transfer transmission assembly in accordance with military standards. The assembly must be packaged in a reusable container measuring 30 x 30 x 19 inches and weighing 140 pounds including container and cushioning. Special attention is required for filling, sealing, wrapping, and placement of the base and cushioning materials. Four units of desiccant and specific stenciling of the container are also mandated.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 0001 to Solicitation No. SPRDL1-23-R-0101.pdf | ||
| Solicitation No. SPRDL1-23-R-0101.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
0BSPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-MB
JG
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K3505 (19207) TRANSFER CASE ASSY W/ CONTAINER** 19207 AK14699893
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
2520-01-469-9893 14 SEPT 2023 B
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 140.0* 9.896 30.0 X 30.0 X 19.0
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION MIL-STD-2073-1, METHOD 54
13. CLEANING 1-B PRESERVATIVE: OPERATIONAL FLUID
MIL-STD-2073-1 2-C CLOSURE: NAS847
14. DRYING 3-D PRESERVARIVE: MIL-PRF-21260, PE 10
MIL-STD-2073-1 4-E WRAP: MIL-PRF-121, TY II, SIZE: 44 X 40.
15. PACKING 5-F BASE: ASTM-D4727, TY CF, CL DOM, VR TW, GR 1100.
6-G CUSHIONING: A-A-59136, CL 1, GR A, TY I
a. LEVEL A 7-H DESICCANT: MIL-D-3464 (4 UNITS)
MIL-STD-2073-1 & NOTE J 8-I CONTAINER: 8145-00-485-8250
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE K
17. NOTES/ DRAWING
* WEIGHT OF CONTAINER AND CUSHIONING ALONE IS 53 LBS
** TRANSFER CASE PART NUMBER 12447125
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT PACKING IN ACCORDANCE WITH MIL-STD-1186 AND APPLICABLE CONTAINER SPECIFICATION.
B. FILL TRANFER ASSEMBLY TO OPERATING FLUID LEVEL. ROTATE INTERNAL MECHANISM SUFFICIENTLY TO ASSURE
COMPLETE COVERAGE OF ALL INTERNAL SURFACES. DRAIN ASSEMBLY.
C. SEAL ALL PORTS WITH PLUGS OR CAPS OF THE APPROPRIATE SIZE.
D. APPLY SPECIFIED OIL TO ALL EXTERNAL UNPAINTED, UNPLATED, FERROUS METAL SURFACES OF TRANSFER CASE
ASSEMBLY.
E. SECURE WRAP USING TAPE.
F. FOR FABRICATION AND PLACEMENT OF BASE SEE SKETCH ON PAGE 2.
G. FOR FABRICATION AND PLACEMENT OF CUSHIONING SEE SKETCHES ON PAGE 2.
MATERIAL PLANK THICKNESS IS 2-1 /4 INCHES.
H. PLACE FOUR (4) UNITS OF DESICCANT NEAR TRANSFER CASE ASSEMBLY.
I. CAUTION: SEAT GASKET PROPERLY PRIOR TO SECUREMENT OF CONTAINER TOP.
J. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
K. STENCIL CONTAINER USING ½ INCH LETTERING, “REUSABLE CONTAINER-DO NOT DESTROY”.
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -MB OMB No. 0704-0188 JG
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.
PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
57K3505 (19207) TRANSFER CASE ASSY W/ CONTAINER** 19207 AK14699893
4. NATIONAL STOCK NO.
2520-01-469-9893
5. DATE
14 SEPT 2023
6. REVISION
B
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
17. NOTES/ DRAWING
SPECIAL PACKAGING INSTRUCTION
File details come from the government source that posted it. Updated .