Special Packaging Instruction No. AK14070532.pdf

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

XJS

XJG

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12447110 (19207) GENERATOR 19207 AK14070532

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2920-01-407-0532 03 AUG 2021 B

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 51.2 (EST) 0.904 (EST) 13.4 x 11.9 x 9.8 (EST)

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, METHOD 42

13. CLEANING 1-C WRAP: A-A-3174, CLASS 1, TYPE II, GRADE A, FINISH 1.

MIL-STD-2073-1 2-D CUSHIONING / BLOCKING / BRACING.

14. DRYING 3-E CONTAINER: ASTM-D5118, CLASS DOM.

MIL-STD-2073-1 4 BAG: MIL-DTL-117, TYPE I, CLASS E, STYLE 1.

15. PACKING 5-E CONTAINER: ASTM-D5118, CLASS WR,

STYLE OPTIONAL (EXCLUDING FOL).

a. LEVEL A

MIL-STD-2073-1 & NOTE G

b. LEVEL B

MIL-STD-2073-1 & NOTE G

16. MARKING

MIL-STD-129

17. NOTES/ DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT PACKING IN ACCORDANCE WITH MIL-STD-1186 AND APPLICABLE CONTAINER SPECIFICATION.

B. COMPLETED UNIT PACK SHALL PASS THE APPLICABLE ROUGH HANDLING TESTS DESCRIBED IN ASTM-D4169, DISTRIBUTION CYCLE 18.

C. SECURE WRAP(S) WITH TAPE.

D. BLOCKING, BRACING, CUSHIONING, AND IMMOBILIZATION OF THE ITEM WITHIN THE CONTAINER SHALL MEET THE

REQUIREMENTS OF MIL-STD-2073-1 AND MIL-STD-1186.

E. CLOSE CONTAINER WITH TAPE IN ACCORANCE WITH CONTAINER SPECIFICATION.

F. THE UNIT CONTAINER SHALL ALSO BE MARKED ON THAT TOP AND ONE SIDE IN ACCORANCE WITH MILK-STD-129

SPECIAL MARKINGS, “REUSABLE CONTAINER AND CUSHIONING – DO NOT DESTROY. OPEN ALONG TAPE SEAMS, AS

NEEDED, USING SHALLOW BLADED KNIFE.”

G. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM-D 5168.

CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS

REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS

WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

*** NOTE: UNIT PACK WEIGHT, CUBE, AND SIZE ARE ESTIMATED AND ARE PROVIED FOR INTERNAL GOVERNMENT

PLANNING PURPOSES ONLY.

SPECIAL PACKAGING INSTRUCTION