Special Packaging Instruction.pdf
PDF 494 KB Posted
- Attached to
- Actuator, Hydraulic Federal contract opportunity
- Solicitation number
- SPRDL1-24-Q-0128
About this file
This document is a Special Packaging Instruction (SPI) for a Hydraulic Cylinder (NSN 4810-01-535-1289). The SPI provides detailed instructions for the preservation, packing, and marking of the cylinder. It specifies the required cleaning, drying, wrapping, and container materials as well as the fabrication of wooden blocking and bracing components. The SPI references various military standards such as MIL-STD-2073-1D and MIL-C-26195. The cylinder is to be secured within the container using the specified hardware and assembly methods. The document includes several figures illustrating the packaging requirements. This SPI supports the federal contract opportunity for an Actuator, Hydraulic (Solicitation Number SPRDL1-24-Q-0128) issued by the Defense Logistics Agency Land and Maritime.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 0005_SPRDL1-24-Q-0128.pdf | ||
| Amendment 0004_SPRDL1-24-Q-0128.pdf | ||
| Amendment 0003_SPRDL1-Q-0128.pdf | ||
| Amendment 0002_SPRDL1-24-Q-0128.pdf | ||
| Amendment 0001_SPRDL1-24-Q-0128.pdf | ||
| Solicitation_SPRDL1-24-Q-0128.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE INDENT 3. SPI NO.
Form Approved -SS RJ OMB No. 0704-0188
12416043 (19207) CYLINDER HYDRAULIC 19207 AK15351289
SPECIAL PACKAGING INSTRUCTION
Page 1 of 6 Pages
DD Form 2169, JUN 86 Previous editions are obsolete
03-21-2017
17. NOTES/DRAWING
MIL-STD-2073-1D
MIL-STD-2073-1D, PROCEDURE 1
b. LEVEL B
NOT APPLICABLE
1 EACH NONE 332.6 14.745 62.3 X 21.3 X 19.2
A. QUALITY ASSURANCE PROVISIONS:
INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT PACKING IN ACCORDANCE WITH
MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. FLUSH OR SLUSH INTERNALLY AND DRAIN EXCESS. APPLY TO ALL UNPAINTED OR UNPLATED METALLIC SURFACES.
MANUFACTURER'S TEST OIL IS ACCEPTABLE IF THE MANUFACTURER'S CAPS / PLUGS REMAIN IN PLACE AND NO CONTAMINATION
HAS OCCURRED.
C. ALL OPEN PORTS SHALL BE SEALED WITH CAPS OR PLUGS CONFORMING TO MIL-C-5501 IN ACCORDANCE WITH MIL-STD-2073-1.
MANUFACTURES CAPS ARE ACCEPTABLE.
D. FABRICATE BLOCKS "A", "B", "C" AND "D" AS SPECIFIED IN MATERIALS CHART ON PAGE 2, FIGURE 1 AND FIGURE 2 ON PAGE 3.
FABRICATE BLOCK ASSEMBLY "1" (2 EACH) BY SECURING BLOCK "B" (2 EACH) TO BLOCK "A" (1 EACH) USING FF-N-105 NAILS OR STAPLES AS SHOWN IN FIGURE 3 ON PAGE 3. DRILL HOLES IN BLOCK ASSY "1" AS SHOWN IN FIGURE 3 ON PAGE 3.
FABRICATE BLOCK ASSEMBLY "2" (2 EACH) BY SECURING BLOCK "D" (2 EACH) TO BLOCK "C" (1 EACH) USING FF-N-105 NAILS OR STAPLES AS SHOWN IN FIGURE 4 ON PAGE 3. DRILL HOLES IN BLOCK ASSY "2" AS SHOWN IN FIGURE 4 ON PAGE 3.
E. FABRICATE CONTAINER AS SPECIFIED IN NOTE 4 OF BLOCK 20 WITH RUBBING STRIPS 8-12 INCH IN LENGTH AS SHOWN IN FIGURE 5
ON PAGE 4.
F. SECURE BLOCK ASSEMBLY "1" (2 EACH) ON CONTAINER BASE USING FF-N-105 STAPLES AS SHOWN IN FIGURE 5 ON PAGE 4. USING BLOCK ASSEMBLIES "1" AS A GUIDE, MATCH DRILL 3/8 AND 1/2 HOLES THROUGH BASE AS SHOWN IN FIGURE 6 ON PAGE 4. SECURE BLOCK ASSEMBLY "1" (2 EACH) TO THE CONTAINER BASE USING CARRIAGE BOLT "1" (4 EACH), FLATWASHER "2" (4 EACH), LOCKWASHER "3" (4 EACH) AND NUT "4" (4 EACH) AS SPECIFIED IN HARDWARE CHART ON PAGE 2 AND AS SHOWN IN FIGURE 7 ON PAGE 5. INSERT BOLT "5" THROUGH BLOCK ASSEMBLIES "1" AS SPECIFIED IN HARDWARE CHART ON PAGE 2 AND AS SHOWN IN
FIGURE "7" ON PAGE 5.
WRAP CYLINDER ASSEMBLY AS SPECIFIED IN NOTE 4 OF BLOCK 20. SECURE CYLINDER ASSEMBLY TO CONTAINER BASE USING BLOCK ASSEMBLY "2" (2 EACH), BOLT "5" (4 EACH), FLATWASHER "6", LOCKWASHER "7" (4 EACH), NUT "8" (4 EACH) AS SPECIFIED
IN HARDWARE CHART ON PAGE 2 AND AS SHOWN IN FIGURE 8 ON PAGE 6.
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
12. PRESERVATION
13. CLEANING
14. DRYING
15. PACKING
18. 19. 20.
STEPS REQD DESCRIPTION
B. LEVEL B
NOT APPLICABLE
a. LEVEL A
MIL-STD-2073-1D, METHOD 20
a. LEVEL A
MIL-STD-2073-1D AND NOTE H
MIL-STD-129
16. MARKING
STE
1B PRESERVATIVE: MIL-L-21260, GRADE 10.
2C CLOSURE: MIL-C-5501.
3D BLOCKING AND BRACING: MIL-STD-1186.
4F 1 WRAP: MIL-B-121, TYPE I, GRADE A, CLASS 2, SIZE 68 X 26.
5E 1 CONTAINER: MIL-B-26195 (MOD), STYLE A, TYPE II, GRADE I,
CLASS 1, SIZE 60 X 19 X 13.
6G CLOSURE: SEE NOTE.
A 4810-01-5351289
Form Approved -SS RJ OMB No. 0704-0188
12416043 (19207) CYLINDER HYDRAULIC 19207 AK12416043
SPECIAL PACKAGING INSTRUCTION
Page 2 of 6 Pages
DD Form 2169, JUN 86 Previous editions are obsolete
03-21-2017
NOTE 1:
COMMERCIAL QUALITY STEEL WITH COMMERCIAL QUALITY ZINC PLATING IS ACCEPTABLE.
TO PREVENT LOOSENING OF NUTS AFTER INSTALLATION, APPLY PAINT, ASPHALTUM, OR MIL-C-16173 GRADE 1 PRESERVATIVE TO, OR
PHYSICALLY NICK, THE EXPOSED THREADS OF THE BOLTS.
Comments
A 2 X 4 18 2
B 2 X 4 8-1/4 4 FABRICATE IN ACCORDANCE WITH FIGURE 1 ON PAGE 3.
C 2 X 4 14 2
D 2 X 4 5-3/4 4 FABRICATE IN ACCORDANCE WITH FIGURE 2 ON PAGE 3.
1 CARRIAGE BOLT 3/8 X 7 4 SEE NOTE 1.
2 FLATWASHER 3/8 20 SEE NOTE 1.
3 LOCKWASHER 3/8 4 SEE NOTE 1.
4 NUT 3/8 UNC 4 SEE NOTE 1.
5 CARRIAGE BOLT 1/2 X 12 4 SEE NOTE 1.
6 FLATWASHER 1/2 4 SEE NOTE 1.
7 LOCKWASHER 1/2 4 SEE NOTE 1.
8 NUT 1/2 UNC 4 SEE NOTE 1.
9 LAG BOLTS 3/8 X 3-1/2 16 SEE NOTE 1.
Qty.DESCRIPTION SIZE
Pad or Block
Number
MIL-STD-731,
Lumber
(Nominal Size)
Critical Dimensions (Inches)
L W D
Qty.
MATERIALS
G. CLOSE CONTAINER IN ACCORDANCE WITH MIL-C-26195.
H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.
HARDWARE
4810-01-5351289 A
Form Approved -SS RJ OMB No. 0704-0188
12416043 (19207) CYLINDER HYDRAULIC 19207 AK12416043
SPECIAL PACKAGING INSTRUCTION
Page 3 of 6 Pages
DD Form 2169, JUN 86 Previous editions are obsolete
03-21-2017
FIGURE 1
FIGURE 3
All dimensions are in inches.
All dimensions are actual.
All holes are dimensioned to center.
FIGURE 4
FIGURE 2
Form Approved -SS RJ OMB No. 0704-0188
12416043 (19207) CYLINDER HYDRAULIC 19207 AK12416043
SPECIAL PACKAGING INSTRUCTION
Page 4 of 6 Pages
DD Form 2169, JUN 86 Previous editions are obsolete
03-21-2017
All dimensions are in inches.
All dimensions are actual.
All holes are dimensioned to center.
FIGURE 5
FIGURE 6
Form Approved -SS RJ OMB No. 0704-0188
12416043 (19207) CYLINDER HYDRAULIC 19207 AK12416043
SPECIAL PACKAGING INSTRUCTION
Page 5 of 6 Pages
DD Form 2169, JUN 86 Previous editions are obsolete
03-21-2017
FIGURE 7
Form Approved -SS RJ OMB No. 0704-0188
12416043 (19207) CYLINDER HYDRAULIC 19207 AK12416043
SPECIAL PACKAGING INSTRUCTION
Page 6 of 6 Pages
DD Form 2169, JUN 86 Previous editions are obsolete
03-21-2017
FIGURE 8
File details come from the government source that posted it. Updated .