SPEC-Tents.pdf

APPENDIX A, SHELTER PRODUCT DATA SHEET, REVISION A:

PRODUCT DATA SHEET CONTRACTOR NAME: Utilis USA, LLC

1.PART NUMBER: TM54A1-OD 2.NSN 8340-01-579-1568

3.NAME: Utilis TM54 (Green) 4.TYPE: Quick Erect Soft Shelter 5.CLASS: N/A

6.COLOR: Green 383, 34094 7. Support Exterior Folding Frame System:

8.SERIES: TM Series

9. INTENDED Base Camp

USE:

10.DIMENSIONS

(IN FEET AND

INCHES)

LENGTH:

29'6"

WIDTH:

18'6"

HEIGHT:

RIDGE/EAVE 8'8"/6'6"

11.DIMENSIONS

(EXTERNAL

GUYED)

LENGTH

41'6"

WIDTH

24'6"

12.SQUARE FEET 546 sq ft

INTERIOR:

13.WEIGHT 810 lbs(POUNDS, UNPACKAGED) 14.WEIGHT 1180 lbs

(PACKAGED)

15.SHIPPING CUBE 94(PACKAGED)

16SHIPPING

CONTAINER

LENGTH 96" WIDTH 47" HEIGHT 36"

17.SET-UP TIME/

NUM BER OF PERSONS 4 people/8 minutes

18.STRIKE TIME/

NUM BER OF PERSONS 4 people/12 minutes

19.PARTS INCLUDED:

TM54 Shelter, 2 Door - TM54A1-OD(8340015791568); TM54 Liner System, 2 Door - LS54A1-WH; TM54 Thermal Fly - TF54A1-OD; Electrical Distribution Package - TM54EC

20.DESCRIPTION:

TM54 Shelter, 2 Door, Standard Liner, Electrical Distribution;

Compatible with Drawings 5-4-9755-16, 5-4-6764

21. SUPPORT

EQUIPMENT:

PART NUMBER

Or NSN

Included or Optional

DESCRIPTION

LIGHT SET

Product Data Sheet

UT-31-MC-400B Optional Four LED light Kit with transport case

UT-31-MC-502S Optional Four EMI hardened light kit with transport case

UT-31-MC-5004MS Optional Four general purpose light kit with transport case

ELECTRICAL

OUTLET SET

Product Data Sheet

TM54-EC Included Lightweight cords integrated into shelter liner raceways

FLOORING

Product Data

UT-FLR Optional Modular shelter flooring

HEATER

AIR

CONDITIONER

GENERATOR

POWER

DISTRIBUTION

TRAILER

MOUNTED

SUPPORT

SYSTEM Product Data Sheet

INSULATED

LINER Product Data Sheet

INSULATED

FLOORING

SOLAR SHADE/

CAMOU. NETT

1. PART NUM BER: List Manufacturers identification number.

2. NSN: List the National Stock Number if it had been established.

3. NAME: List Manufacturers product name.

4. TYPE: List Type of Tent or support equipment (example: Command Post, Modular, Expandable)

5. CLASS: List class if established.

6. COLOR: List Color or Shade reference FED-STD 595 color number if applicable.

7. SUPPORT SYSTEM: List type of support, state type examples: frame, pole, air beam

8. SERIES: List product line designation is applicable example: Series 50HH

9. INTENDED USE: List (examples: General Purpose, Command Post, Maintenance, Kitchen, Billeting)

10. DIMENSIONS: External in feet and inches

11. DIMENSIONS: (EXTERNAL GUYDED): List the area for deployment needed including anchoring.

12. SQUARE FEET INTERIOR: List usable internal area.

13. WEIGHT (UNPACKAGED): List weight minus and packaging for the entire system.

14. Weight Shipping: List weight including all packaging.

15. SHIPPING CUBE: List the Cubic measurement of the shipping container.

16. SHIPPING CONTAINER: List measurements.

17. SET-UP TIME: List total time fully staked and list specific amount of people used for the set-up.

18. STRIKE TIME: List total time to take down and pack into storage bags and amount of people needed.

19. PARTS INCLUDED: List all parts with NSN’s if established (example: Type and ground anchoring support system quantity of stake or pin., Type of flooring., Type and quantity of transport/storage container bags., Includes electrical wiring/outlets with surge suppressors (must meet UL and NEC standards if supplied)

20. DESCRIPTION:

State compatible with existing military fluorescent lighting system or includes lights in accordance with MIL-L-44259 Type and quantity of doorways and if closures and screens are part of the door assembly Are there optional accessories Is it supported by a trailer system that provides controlled environments and electrical capabilities Can it provide interconnection capabilities/supported by TEMPER Vestibule connector interoperable with vestibule accordance with , drawing 5-4-9755-16

21. SUPPORT EQUIPMENT:

List optional or included Support Equipment as applicable. A product data sheet for each part number or nsn is required to be submitted.