SPE8ES19Q0096.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE8ES-19-Q-0096

2. DATE ISSUED

2018 NOV 08

3. REQUISITION/PURCHASE REQUEST NO.

0075166969

RATING

DO-C9

DLA TROOP SUPPORT

CONSTRUCTION & EQUIPMENT (HRD WARE)

700 ROBBINS AVENUE PHILA PA 19111

PHILADELPHIA PA 19111

USA

Buyer: Kristen Baraniewicz PEPCEB5 Tel: 215-737-4484 Email: Kristen.Baraniewicz@dla.mil

6. DELIVER BY (Date)

30 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 NOV 13

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 20 PAGES

SPE8ES-19-Q-0096

CONTINUED ON NEXT PAGE

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at: http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.

aspx The revision of the TQ Master in effect on the award date controls.

FSG80 Suppliers: Failure to fully comply with the required packaging & labeling provisions may result in payment delays or rejection of delivered material.

VSM: Suppliers MUST register themselves on the VSM website at https://vsm.distribution.dla.mil/. Once registration is complete VSM will assess the information provided and process shipments according to the contract terms. VSM WILL NOT provide transportation for Hazardous Material however they will provide the Container Labels and Unit/Intermediate Pack Labels. If suppliers do not access VSM for this information they can email delivery@dla.mil and include DDC-2010/1 Form located at https://vsm.distribution.dla.mil/net/secure_default.aspx. To obtain the form click on the link, once the page appears, on the left hand side click on “Shipping Instructions” and DDC-2010/1 will upload.

THE FOLLOWING CLAUSES ARE APPLICABLE:

DFARS 252.223-7001 – HAZARD WARNING LABELS

FAR 52.223-03 – HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: 8040-00-463-7042

ITEM DESCRIPTION:

ADHESIVE

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES

Hazard Communication Standard Notice:

Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data,Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirementfor preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who providehazardous materials to government activities.

The Occupational Safety and Health Administration (OSHA) has modified its HazardCommunication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling ofChemicals.

As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifyingchemicals and communicating the applicable information on labels.

In accordance with the revised standard after June 1, 2015:

1.Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheetsconsistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.

2. Supplierswill also be required to submit, to the contracting officer for review and approval prior to award, Hazardous CommunicationStandard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), FederalHazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is requiredfor hazardous materials delivered to the Government.

3. Finally, suppliers must train their employees on the new safetydata sheets, hazardous communication labels, and requirements of 29 C.F.R.

1910.1200.

For more information on SDS, refer to OSHAswebsite, available at:

https://www.osha.gov/law-regs.html

For information on 29 C.F.R. 1910.1200, refer to the belowlink:

https://www.osha.gov/dsg/hazcom/index.html

MIL-STD-129 IDENTIFICATION LABELS ARE REQUIRED TO BE APPLIED TO THEUNIT

PACK/CONTAINER, INTERMEDIATE AND EXTERIOR CONTAINERS AS SHOWN IN

(FIGURES 1, 17 AND 18) AND INCLUDE DATA LISTED IN PARA. 5.1.1a. THRU h.

AND 5.1.2 a. THRU j. OF MIL-STD-129.

ADDITIONAL GUIDANCE FOR THE PROPER FORMAT OF MANDATORY SHELF LIFE TYPE,

VERBIAGEAND DATES ARE GIVEN IN PARAGRAPH 5.10.1 OF MIL-STD-129. NOTE:

MANDATORY ADHERENCE TO PARAGRAPHS 5.10.1 a. AND 5.10.1 b. ISREQUIRED.

ADDITIONAL GUIDANCE: FOR MINIMUM MONTHS OF SHELF LIFE TIME REMAINING

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 8040-00-463-7042 CONT'D

UPON RECEIPT BY THE FIRST GOVERNMENT ACTIVITY,REFERENCE TABLE IV OF

MIL-STD-129. NOTE: MANDATORY ADHERENCE TO TABLE IV IS REQUIRED.

ADDITIONALLY, FAILURE TO MEET MIL-STD-129REQUIREMENTS WITHOUT WRITTEN

APPROVAL OF WAIVER FROM CONTRACTING OFFICER MAY RESULT IN, (AT THE

DISCRETION OF THE CONTRACTINGOFFICER) ADDITIONAL COSTS TO THE

CONTRACTOR OR RETURN OF MATERIAL TO CONTRACTOR FOR MIL-STD-129

RELABELING AND REPACKAGING,REPALLETIZING OF SUPPLIES.

The MFD DATE on the MIL-STD-129R label is the correct date to use for shelf-life determination.

U/I = KT

Size: a 1 quart kit consisting of separately packaged base resin and curing agent.

Color: Amber

TYPE II (12 MONTH) SHELFLIFE ITEM:

PRODUCTS DELIVERED UNDER THIS CONTRACT SHALL BE MANUFACTURED TO ENSURE

THAT A MINIMUM OF 85% SHELF LIFE IS REMAINING ATTIME OF RECEIPT BY THE

FIRST GOVERNMENT ACTIVITY. SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE

WITH THE LATEST REVISION OFMIL-STD-129, AND SHALL CLEARLY INDICATE THE

MANUFACTURED DATE AND THE INSPECTION/TEST DATE.

HENKEL CORPORATION DBA AEROSPACE33564 P/N 420502

LOCKHEED MARTIN CORPORATION DBA 03640 P/N 6084193

HENKEL LOCTITE CORP 04347 P/N EA-956 QUART KIT

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 8040-00-463-7042 1,700.000 KT $ ________________ $ ________________

ADHESIVE

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNNTHKNESS:X

UNIT CONT:XX OPI:M

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129.

SPECIAL MARKING CODE:33 -33 Type II, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY01, 2008

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

***PHYSICAL CHARACTERISTICS CODE ZZ- REFER TO 29 CFR1910.1200 HCS

SAFETY DATA SHEET***

SPECIAL LABELING REQUIREMENT:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 8040-00-463-7042 CONT'D

MATERIAL MUST BE LABELED TO SHOW STORAGE CODE Z.

#STORAGE: STORE MATERIAL AT 40°F OR COLDER.

MATERIAL CAN SHIP AT AMBIENT TEMPERATURE.#

ITEM MARKING

Each item shall be marked with thefollowing:

(1) lot or batch number

(2) shelf life data

(3) instructions for use, thinning, mixing, shaking, etc.

(4) instructionsfor storage, i.e. requires refrigeration, etc.

(5) for kits, each component shall be marked with the kit name and componentpart.

(6) manufacturer's name and part number

(7) if applicable, the maximum volatile organic compound content (VOC), less water and exempt solvents, in lbs/gl or grams/liter.

(8) if the item is on an existing contract, the supplier shall follow the pre-arrangedCalifornia South Coast Air Quality Management District labeling requirements.

PACKAGING

KIT PACKAGING: The product shall befurnished in the specified kit size quantities packaged in the manufacturer's original, separate containers and in accordance withnormal commercial practice. There shall be no interaction chemically or physically with the contents so as to damage the containers or alter the strength, quality, or purity of the contents. Such packaged ingredients shall be further packaged or assembledtogether as a complete unit in kit form. The filled containers and kit assembly shall be closed in a manner that will insure thecontents will not spill or leak from the containers and that separation of the components will be prevented duringshipment, handling, storage, and redistribution.

Less than 1 gallon (127 fl.oz. or 231ci) kit of material. MIL STD 129 labelrequired on each assembled kit. Intermediate container will be a D3 box (4G box if hazardous) and braced with proper dunnage toprevent damage and movement. Itemized list of contents required.

- Option A: All contents making up one kit will be placed in a E6box and braced with proper dunnage to prevent damage and movement.

- Option B: Kits that contain 32 fl.oz. or 58 ci or less ofmaterial will be packaged by way of either: a heavy weight clear plastic bag, heat-shrink method, heat-sealed method, or blisterpack method.

- Option C: Cans only. Adhesive disk with adhesive properties of at least equal strength of the containers beingbonded will be used to bond containers together creating a singular and complete entity (kit).

- Option D: Cans only. Heat-shrinkwith bonding properties that would keep the cans secure before any damage to the cans would occur. Bonded containers together create a singular and complete entity (kit).

MARKING

All unit, intermediate, transport packages and unit loads shall be marked and barcoded in accordance with the latest version of MIL-STD- 129, "Military Marking For Shipment and Storage". "Latest version"is defined as the version in effect on the date of bid submittal.

Federal Standards and Military Standards can be accessed on-linevia the Defense Logistics Agency's "Assist" Quicksearch web site:

http://assist.daps.dla.mil/quicksearch/.

PARCEL POST ADDRESS:

SW3119

DLA DISTRIBUTION WARNER ROBINS

455 BYRON STREET

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 8040-00-463-7042 CONT'D

BLDG 376

ROBINS A F B GA 31098-1887

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

SW3119

DLA DISTRIBUTION WARNER ROBINS

455 BYRON STREET BLDG 376

ROBINS A F B GA 31098-1887

US

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0075166969 0001 N/A N/A N/A 10/26/2018

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

C01 SUPERSEDED PART NUMBERED ITEMS (SEP 2016)

C21 SHIPPING INSTRUCTION REQUEST (SIR) (AUG 2017)

C20 VENDOR SHIPMENT MODULE (VSM) (AUG 2017)

SECTION E - INSPECTION AND ACCEPTANCE

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

SECTION F - DELIVERIES OR PERFORMANCE

52.211-16 VARIATION IN QUANTITY (APR 1984) FAR

As prescribed in 11.703(a), insert the following clause:

(a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) of this clause.

(b) The permissible variation shall be limited to:

0 Percent increase [Contracting Officer insert percentage]

0 Percent decrease [Contracting Officer insert percentage]

This increase or decrease shall apply to ITEM NO. 0001.* https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2011_7.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 20 PAGES

SECTION F - DELIVERIES OR PERFORMANCE (CONTINUED)

(End of clause)

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-34 F.O.B. DESTINATION (NOV 1991) FAR

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL (If None, Insert “None”)

ACT

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (OCT 2016) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS

252.203-7995 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS (NOV 2016) DFARS

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016) FAR

52.204-14 SERVICE CONTRACT REPORTING REQUIREMENTS (OCT 2016) FAR

52.204-15 SERVICE CONTRACT REPORTING REQUIREMENTS FOR INDEFINITE-DELIVERY CONTRACTS (OCT 2016) FAR

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR

52.204-20 PREDECESSOR OF OFFEROR (JUL 2016) FAR

As prescribed in 4.1804(d), insert the following provision:

(a) Definitions. As used in this provision -

“Commercial and Government Entity (CAGE) code” means -

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [ ] is or [ ] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code:

Predecessor legal name:

(Do not use a “doing business as” name)

(End of provision)

52.204-23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY

KASPERSKY LAB AND OTHER COVERED ENTITIES (JUL 2018) FAR

As prescribed in 4.2004, insert the following clause:

(a) Definitions. As used in this clause --

Covered article means any hardware, software, or service that --

(1) Is developed or provided by a covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a covered entity.

Covered entity means --

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any covered article. The Contractor is prohibited from --

(1) Providing any covered article that the Government will use on or after October 1, 2018; and

(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement. (1) In the event the Contractor identifies a covered article provided to the Government during contract performance, https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%204_18.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:

(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable;

supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial items.

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) DFARS

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) DFARS

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR SUSPENSION (OCT 2015) FAR

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) FAR

252.211-7005 SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS (NOV 2005) DFARS As prescribed in 211.273-4, use the following clause:

(a) Definition. “SPI process,” as used in this clause, means a management or manufacturing process that has been accepted previously by the Department of Defense under the Single Process Initiative (SPI) for use in lieu of a specific military or Federal specification or standard at specific facilities. Under SPI, these processes are reviewed and accepted by a Management Council, which includes representatives of the Contractor, the Defense Contract Management Agency, the Defense Contract Audit Agency, and the military departments.

(b) Offerors are encouraged to propose SPI processes in lieu of military or Federal specifications and standards cited in the solicitation. A listing of SPI processes accepted at specific facilities is available via the Internet at http://guidebook.dcma.mil/20/guidebook_process.htm (paragraph 4.2).

(c) An offeror proposing to use an SPI process in lieu of military or Federal specifications or standards cited in the solicitation shall

(1) Identify the specific military or Federal specification or standard for which the SPI process has been accepted;

(2) Identify each facility at which the offeror proposes to use the specific SPI process in lieu of military or Federal specifications or standards cited in the solicitation;

(3) Identify the contract line items, subline items, components, or elements affected by the SPI process; and

(4) If the proposed SPI process has been accepted at the facility at which it is proposed for use, but is not yet listed at the Internet site specified in paragraph (b) of this clause, submit documentation of Department of Defense acceptance of the SPI process.

(d) Absent a determination that an SPI process is not acceptable for this procurement, the Contractor shall use the following SPI processes in lieu of military or Federal specifications or standards:

(Offeror insert information for each SPI process)

SPI Process:

Facility:

https://dibnet.dod.mil https://dibnet.dod.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

Military or Federal Specification or Standard:

Affected Contract Line Item Number, Subline Item Number, Component, or Element:

(e) If a prospective offeror wishes to obtain, prior to the time specified for receipt of offers, verification that an SPI process is an acceptable replacement for military or Federal specifications or standards required by the solicitation, the prospective offeror

(1) May submit the information required by paragraph (d) of this clause to the Contracting Officer prior to submission of an offer; but

(2) Must submit the information to the Contracting Officer at least 10 working days prior to the date specified for receipt of offers.

52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (OCT 1997) FAR

52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (OCT 2016) FAR

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015) FAR

52.222-26 EQUAL OPPORTUNITY (SEP 2016) FAR

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014) FAR

52.222-50 COMBATTING TRAFFICKING IN PERSONS (MAR 2015) FAR

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997) FAR

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number.

This information shall also be included on the Material Safety Data Sheet submitted under this contract.

Material (If none, insert “None”)

Identification No.

52.223-11 OZONE-DEPLETING SUBSTANCES AND HIGH GLOBAL WARNING POTENTIAL HYDROFLUOROCARBONS (JUN 2016)

FAR

As prescribed in 23.804(a)(1), insert the following clause:

Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016)

(a) Definition. As used in this clause -

“Global warming potential” means how much a given mass of a chemical contributes to global warming over a given time period compared to the same mass of carbon dioxide. Carbon dioxide's global warming potential is defined as 1.0.

“High global warming potential hydrofluorocarbons” means any hydrofluorocarbons in a particular end use for which EPA's Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

“Hydrofluorocarbons” means compounds that only contain hydrogen, fluorine, and carbon.

“Ozone-depleting substance,” means any substance the Environmental Protection Agency designates in 40 CFR Part 82 as -

(1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2023_8.html http://www.epa.gov/snap

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

(2) Class II, including, but not limited to, hydrochlorofluorocarbons.

(b) The Contractor shall label products that contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j (b), (c), (d), and (e) and 40 CFR part 82, subpart E, as follows:

WARNING

Contains (or manufactured with, if applicable) * , a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere.

* The Contractor shall insert the name of the substance(s).

(c) Reporting. For equipment and appliances that normally each contain 50 or more pounds of hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons, the Contractor shall -

(1) Track on an annual basis, between October 1 and September 30, the amount in pounds of hydrofluorocarbons or refrigerant blends containing hydrofluorocarbons contained in the equipment and appliances delivered to the Government under this contract by -

(i) Type of hydrofluorocarbon (e.g., HFC-134a, HFC-125, R-410A, R-404A, etc.);

(ii) Contract number; and

(iii) Equipment/appliance;

(2) Report that information to the Contracting Officer for FY16 and to www.sam.gov, for FY17 and after -

(i) Annually by November 30 of each year during contract performance; and

(ii) At the end of contract performance.

(d) The Contractor shall refer to EPA's SNAP program (available at http://www.epa.gov/snap) to identify alternatives. The SNAP list of alternatives is found at 40 CFR part 82 subpart G with supplemental tables available at http://www.epa.gov/snap.

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) FAR

252.223-7006 PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS—BASIC (SEP

2014) DFARS

52.225-13 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JUN 2008) FAR

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM—BASIC (DEC 2016) DFARS

252.225-7001 BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM—BASIC (DEC 2016), ALT I (DEC 2016) DFARS

252.225-7002 QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (DEC 2016) DFARS

52.232-1 PAYMENTS (APR 1984) FAR

52.232-8 DISCOUNTS FOR PROMPT PAYMENT (FEB 2002) FAR

52.232-11 EXTRAS (APR 1984) FAR

52.232-25 PROMPT PAYMENT (JAN 2017) FAR

52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-SYSTEM FOR AWARD MANAGEMENT (JUL 2013) FAR http://uscode.house.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/www.sam.gov https://www.epa.gov/snap https://www.epa.gov/snap

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 20 PAGES

52.232-40 PROVIDING ACCELERATED PAYMENTS TO SMALL BUSINESS SUBCONTRACTORS (DEC 2013) FAR

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) DFARS

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) DFARS

As prescribed in 232.7004(b), use the following clause:

(a) Definitions. As used in this clause-

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall-

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

(Contracting Officer: Insert applicable document type(s).

Note: If a “Combo” document type is identified but not supportable by the

Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report”

(stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable.”)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC Issue By DoDAAC Admin DoDAAC

Inspect By DoDAAC Ship To Code

Ship From Code Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC) https://www.acquisition.gov/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

Field Name in WAWF Data to be entered in

WAWF

Accept at Other DoDAAC LPO DoDAAC

DCAA Auditor DoDAAC Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) DFARS

52.233-1 DISPUTES (MAY 2014) FAR

52.233-3 PROTEST AFTER AWARD (AUG 1996) FAR

52.233-4 APPLICABLE LAW FOR BREACH OF CONTRACT CLAIM (OCT 2004) FAR

52.233-9001 DISPUTES - AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (DEC 2016) DLAD

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the Contractor (see Federal Acquisition Regulation (FAR) clause 52.233-1), or, for the Agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate.

c) The offeror should check here to opt out of this clause:

[ ] Alternate wording may be negotiated with the contracting officer.

52.243-1 CHANGES - FIXED PRICE (AUG 1987) FAR

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) DFARS

52.244-6 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUL 2018) FAR

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) DFARS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 20 PAGES

252.247-7023 TRANSPORATION OF SUPPLIES BY SEA (APR 2014) DFARS

52.249-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED-PRICE) (SHORT FORM) (APR 1984) FAR

52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) FAR

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998) FAR

As prescribed in 52.107(b), insert the following clause:

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR: https://www.acquisition.gov/?q=browsefar

DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

52.253-1 COMPUTER GENERATED FORMS (JAN 1991) FAR

252.225-7048 EXPORT CONTROLLED ITEMS (JUN 2013) DFARS

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS

252.203-7994 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS—REPRESENTATION (NOV 2016) DFARS

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) FAR

As prescribed in 4.1804(b), use the following provision:

(a) Definitions. As used in this provision -

“Commercial and Government Entity (CAGE) code” means -

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it [ ] has or [ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code:

Immediate owner legal name:

(Do not use a “doing business as” name) https://www.acquisition.gov/sites/default/files/current/far/html/52_000_107.html https://www.acquisition.gov/?q=browsefar https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%204_18.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 20 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

Is the immediate owner owned or controlled by another entity?: [ ] Yes or [ ] No.

(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code:

Highest-level owner legal name:

(Do not use a “doing business as” name)

252.204-7007 ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2015) DFARS

(2) The following representations or certifications in ORCA are applicable to this solicitation as indicated by the Contracting Officer:

[Contracting Officer check as appropriate.]

[ ] (i) 252.209-7002, Disclosure of Ownership or Control by a Foreign Government.

[ ] (ii) 252.225-7000, Buy American --Balance of Payments Program Certificate.

[ ] (iii) 252.225-7020, Trade Agreements Certificate.

[ ] Use with Alternate I.

[ ] (iv) 252.225-7022, Trade Agreements Certificate --Inclusion of Iraqi End Products.

[ ] (v) 252.225-7031, Secondary Arab Boycott of Israel.

[ ] (vi) 252.225-7035, Buy American --Free Trade Agreements --Balance of Payments Program Certificate.

[ ] Use with Alternate I.

[ ] Use with Alternate II.

[ ] Use with Alternate III.

[ ] Use with Alternate IV.

[ ] Use with Alternate V.

(e) The offeror has completed the annual representations and certifications electronically via the Online Representations and Certifications

Application (ORCA) website at https://www.acquisition.gov/ . After reviewing the ORCA database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in

FAR 52.204-8(c) and paragraph (d) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer, and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by provision number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR/DFARS

Provision # Title Date Change

52.207-4 ECONOMIC PURCHASE QUANTITY - SUPPLIES (AUG 1987) FAR

As prescribed in 7.203, insert the following provision:

(a) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government.

https://www.acquisition.gov/ https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%207_2.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 20 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

(b) Each offeror who believes that acquisitions in different quantities would be more advantageous is invited to recommend an economic purchase quantity. If different quantities are recommended, a total and a unit price must be quoted for applicable items. An economic purchase quantity is that quantity at which a a significant price break occurs. If there are significant price breaks at different quantity points, this information is desired as well.

OFFEROR RECOMMENDATIONS

ITEM QUANTITY PRICE QUOTATION TOTAL

(c) The information requested in this provision is being solicited to avoid acquisitions in disadvantageous quantities and to assist the Government in developing a data base for future acquisitions of these items. However, the Government reserves the right to amend or cancel the solicitation and resolicit with respect to any individual item in the event quotations received and the Government's requirements indicate that different quantities should be acquired.

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) DFARS

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2016) FAR

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) DFARS

L01 ELECTRONIC AWARD TRANSMISSION (SEP 2016)

L02 ELECTRONIC ORDER TRANSMISSION (SEP 2016)

Offerors shall identify one of the following alternatives for paperless order transmission:

[ ] American National Standards Institute (ANSI) X12 Standards through a DLA transaction services approved value added network (VAN).

[ ] Electronic mail (email) award notifications containing web links to electronic copies of the Department of Defense (DD) Form 1155, Order for Supplies or Services.

Email notification requires registration on the DLA internet bid board system (DIBBS) home page at https://www.dibbs.bsm.dla.mil/ .

If the offeror elects ANSI/VAN order transmission, DLA will send Electronic Data Interchange (EDI) transaction sets at time of award. The contractor shall acknowledge receipt of transaction sets with a functional acknowledgement or order receipt message within 24 hours. If the award transaction set is received on a weekend or Federal holiday, the acknowledgement must be received on the next working day. This acknowledgement will confirm that the contractor's interface with the system is working as needed for contract ordering.

Note: Information regarding EDI, ANSI X12 transactions, and DLA transaction services approved VANs can be obtained from the DAAS web site by going to https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp.

Questions concerning electronic ordering should be directed to the appropriate procuring organization point of contact below:

DLA Land and Maritime, Helpdesk.EBS.L&M.LTCs@dla.mil

DLA Troop Support, dlaedigroup@dla.mil

DLA Aviation, avnprocsysproceddiv@dla.mil, phone # 804-279-4026

L04 OFFERS FOR PART NUMBERED ITEMS (SEP 2016)

(a) For part numbered items, identified in the item description only by the name of an approved source (CAGE code), a part number, and a brief description.

https://www.dibbs.bsm.dla.mil/ https://www.dibbs.bsm.dla.mil/ https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp https://www.transac
tionservices.dla.mil/daashome/edi-vanlist-dla.asp https://www.transactionservices.dla.mil/daashome/edi-vanlist-dla.asp

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 20 PAGES

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS (CONTINUED)

CONTINUED ON NEXT PAGE

Exact product - applies to contract line-item(s) (CLIN(s)):

CAGE code part number

Alternate product - applies to CLIN(s):

CAGE code part number

Superseding part number - applies to CLIN(s):

CAGE code part number

Identify reason for superseding part number:

Administrative P/N change only: Yes No

Minor change/No change in configuration: Yes No

Previously-approved product - applies to CLIN(s):

Contract or Solicitation Number:

CAGE code part number

Correction to CAGE/Part Number - applies to CLIN(s)

CAGE code in error/same corporation, different division Yes No

CAGE code in error/sold to different corporation Yes No

Part number not recognized Yes No

Obsolete part number Yes No

Other Yes No

(b) Exact product means a product described by the name of an approved source and its corresponding part number cited in the item description; and manufactured by, or under the direction of, that approved source. An offeror of an exact product must meet one of the descriptions below.

(1) An approved source offering its part number cited in the item description;

(2) A dealer/distributor offering the product of an approved source and part number cited in the item description;

(3) A manufacturer who produces the offered item under the direction of an approved source; and has authorization from that approved source to manufacture the item, identify it as that approved source's name and part number, and sell the item directly to the Government.

(4) A dealer/distributor offering the product of a manufacturer that meets the description in subparagraph (3) above.

(c) Alternate product.

(1) The offeror must indicate that an alternate product is being offered if the offeror is any one of the following:

(i) An offeror who manufactures the item for an approved source cited in the item description, but does not have authorization from the approved source to identify it as the approved source part number, and sell the item directly to the Government;

(ii) A dealer/distributor offering the product of a manufacturer that meets the description in (i) above;

(iii) An offeror of a reverse-engineered product that is not cited in the item description; or

(iv) An offeror whose product does not meet the criteria of exact product, superseding product or previously approved product.

(2) An offer of an alternate product is an alternate offer.

(d) The offeror must indicate that a superseding part number is being offered if the offered item otherwise qualifies as an exact product, except that the part number cited in the item description has been superseded due to an administrative part number change with no change in configuration of the item.

(e) The offeror must indicate that a previously-approved product is being offered if the product offered has previously been delivered to the Government or otherwise previously…