SPE8EF18T2652.PDF

PDF 289 KB Posted

Attached to
JACK, HYDRAULIC, TRIP Federal contract opportunity
Solicitation number
SPE8EF18T2652
Issued by
Defense Logistics Agency Troop Support Medical

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE8EF-18-T-2652

2. DATE ISSUED

2018 AUG 14

3. REQUISITION/PURCHASE REQUEST NO.

0075630182

RATING

DLA TROOP SUPPORT

CONSTRUCTION & EQUIPMENT MANU & CON

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Name: Shannon Anderson Buyer Code:DSA0037 Tel: 215-737-2315 Email: Shannon.Anderson@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 AUG 24

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED

ACQUISITIONS REVISION 50 (JULY 9, 2018) WHICH CAN BE FOUND ON THE WEB AT:

http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master%20Solicitation%20Rev-50%20July-9-18.pdf?ver=2018-07-09-071953-083

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 24

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 24 PAGES

SPE8EF-18-T-2652

CONTINUED ON NEXT PAGE

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413 SEE http://www.sba.gov/content/table-small-business-size-standards

FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

DESTINATION INSPECTION REQUIRED - FAR 52.246-1 APPLIES.

This solicitation contemplates an award based on destination inspection.

If an offeror proposes inspection and acceptance at origin, then an evaluation factor IAW Procurement Note E07 will be added to the offeror's quoted/offered price for each origin inspection required. If phased deliveries are required or offered, each phase of delivery will be presumed to result in one inspection.

Fast Pay does not apply to this solicitation

FIRST ARTICLE APPROVAL – CONTRACTOR TESTING REQUIRED (FAR 52.209-3 and

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION A

ALT I)

THE CONTRACTOR SHALL TEST 1 UNIT(S) OF

LOT/ITEM 1730 / 1028441 AS

SPECIFIED IN THIS CONTRACT. PROVIDE WRITTEN NOTICE TO THE CONTRACTING

OFFICER AND THE QAR AT LEAST FOURTEEN (14) CALENDAR DAYS PRIOR TO

SHIPMENT TO GOVERNMENT FOR FAT, TO ACCOMODATE IN-PROCESS VERIFICATION

AND/OR FINAL INSPECTION BY THE QAR. THE CONTRACTOR SHALL SUBMIT THE

FIRST ARTICLE TEST REPORT WITHIN 30 CALENDAR

DAYS FROM THE DATE OF THIS CONTRACT. NOTIFICATION AND SUBMITTAL

ADDRESSES ARE IAW PROCUREMENT NOTE H03. WITHIN

60 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE TEST REPORT, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR

DISAPPROVAL OF THE FIRST ARTICLE. SEE PROCUREMENT NOTE H03:

SUPPLEMENTAL FIRST ARTICLE TESTTING REQUIREMENTS (SEP 2016) - FOR

ADDITIONAL FAT REQUIREMENTS.

DISPOSITION OF FAT UNITS IAW PARAGRAPH (e) OF FAR 52.209-3 OR 52.209-4.

FIRST ARTICLE – CONTRACTOR TESTING – DCMA DELEGATION

Notice to Contractor: The Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) is delegated the authority to approve/disapprove the First Article Test Report submitted in accordance with the requirements in this contract. Any reference to the Contracting Officer as it relates to submission of and approval/disapproval of the FAT Report shall be deemed to mean the DCMA

ACO.

Notice to ACO: The DCMA ACO shall forward a copy of the First Article Test Report and the DCMA ACO’s letter of approval/disapproval to the Contracting Officer at the buying activity and to the address identified in FAR Clause 52.209-3(b).

Procurement Note E03: Production Lot Testing – Contractor (SEP 2016)

(1) The purpose of production lot testing (PLT) is to validate quality conformance of products. PLT is to be completed on the production lot(s) after First Article approval, when a first article is required. The contractor shall price the PLT CLIN to cover the cost of the approved samples that are consumed, destroyed, or otherwise rendered unusable during testing.

(2) The contractor shall provide written notice to the contracting officer and the QAR of the time and location of the test at least fourteen (14) calendar days (or as otherwise specified in the contract) prior to the production lot test so the Government may witness the test.

(3) The QAR will select 1 samples at random from the production lot(s) produced.

(4) The contractor shall perform all tests on the PLT samples to verify/validate for the QAR that the items meet the contract technical/quality requirements.

(5) If a PLT sample fails, the entire production lot quantity produced fails. The contractor shall notify the contracting officer and propose corrective action, if appropriate.

(6) Prepare and disseminate the PLT report as follows:

(a) Prepare the test report in accordance with data item description DI-NDTI-80809B and mark the test report, “Production Lot Test Report, Contract Number [contractor insert] and Lot/Item Number [contractor insert].”

(b) Present the contractor’s PLT report to the QAR for review.

(c) Include the following documentation with all shipments of PLT Reports: DD Form 1222 and DD Form 250/iRAPT receiving report signed by

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION A

the QAR; a copy of the contract/order; a copy of all applicable test reports showing actual results and tolerances specified in the technical data package; material and process certifications; process operations and inspection method sheets; copies of drawings used to manufacture the PLT sample with proper marking to restrict public disclosure (if desired) and from Government use other than for evaluation to the extent consistent with the Government’s data rights under the contract, and documents required under a contract deliverables requirements list, if applicable.

(d) Submit all required documentation to the Government activity specified in the contract in time to allow for at least 30 calendar day period for review of the PLT report, and for the contracting officer to provide written notification of approval/disapproval to the contractor.

PRODUCTION LOT TESTING (PLT) – CONTRACTOR – DCMA DELEGATION

Notice to Contractor: The Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) is delegated the authority to approve/disapprove the Production Lot Test Report submitted in accordance with the requirements in this contract. Any reference to the Contracting Officer as it relates to submission of and approval/disapproval of the FAT Report shall be deemed to mean the DCMA

ACO.

Notice to ACO: The DCMA ACO shall forward a copy of the Production Lot Test Report and the DCMA ACO’s letter of approval/disapproval to the Contracting Officer at the buying activity.

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION A

contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:

http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx

FAR 52.204-23, Products and Services Developed or Provided by Kaspersky

Lab and Other Covered Entities (Jul 2018), applies to all awards made on or after July 16, 2018.

Contractors shall not provide parts and supplies made using additive manufacturing (AM), unless AM is specifically authorized in the solicitation/contract. See procurement note L31.

Procurement History for NSN/FSC:001028441/1730

CAGE Contract Number Quantity Unit Cost AWD Date

05060 N0038313PP395 10.000 0.72000 20130507

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Trasnportation utilizing Government contracts and rates. If this acquisition is for Foreign Military Sales (FMS) FDT will not apply. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. The VSM site can be found at: https://vsm.distribution.dla.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0075630182

NSN/MATERIAL:1730001028441

ITEM DESCRIPTION

JACK,HYDRAULIC,TRIP

JACK,HYDRAULIC,TRIP

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

**DRAWING 270AS133 DIMENSION 5.13 INCH IS INCORRECT. CORRECT DIMENSION

IS 2.56 INCH.**

**DRAWING 270AS133 REV B DIMENSION 5.13 IS INCORRECT AND SHOULD BE 2.56.

ADDITIONALLY, A DRAWING FIELD NOTE

ASSOCIATED WITH THE FOUR .152 DIAMETER HOLES WOULD PROVIDE MORE CLARITY.

AND THAT NOTE IS "4 HOLES EQUALLY SPACED TO EACH OTHER WITHIN +/- .010."

OTHERWISE, REV B DRAWING IS CORRECT.**

FAT AND PLT REQUIREMENTS

PER DWG. 270AS100, FAT & PRODUCTION TESTING IS TO BE IAW SECTION 4 OF

MIL-J-26149. COPY OF SPEC ATTACHED.

CONTRACTOR FIRST ARTICLE

QTY: 1

NUMBER OF DAYS FOR REPORT: 30

NUMBER OF DAYV FOR GOVT REVIEW: 60

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING *OPEN SOLICITATION ONLY*.

TO RECEIVE A COPY OF THE DRAWING(S),

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

MIL-STD-130N, 16 Nov 2012

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

IAW BASIC DRAWING NR 30003 270AS100

REVISION NR H DTD 05/14/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 1128AS123

REVISION NR B DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 1128AS125

REVISION NR A DTD 02/01/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS200

REVISION NR B DTD 03/14/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS109

REVISION NR B DTD 02/13/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS110

REVISION NR A DTD 02/09/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS111

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS112

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 30003 270AS114

REVISION NR B DTD 09/07/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS125

REVISION NR B DTD 02/13/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS126

REVISION NR B DTD 03/05/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS129

REVISION NR A DTD 07/09/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS130

REVISION NR A DTD 07/01/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS137

REVISION NR C DTD 02/01/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS140

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS141

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS142

REVISION NR B DTD 02/08/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS143

REVISION NR A DTD 02/27/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS164

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS169

REVISION NR A DTD 06/27/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS171

REVISION NR A DTD 06/24/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS172

REVISION NR B DTD 02/01/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS175

REVISION NR B DTD 02/27/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS183

REVISION NR B DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS183

REVISION NR C DTD 01/01/1939

IAW REFERENCE DRAWING NR 30003 1128AS121

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REVISION NR C DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 1128AS121

REVISION NR C DTD 01/29/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS144

REVISION NR A DTD 07/10/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS145

REVISION NR C DTD 09/25/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS148

REVISION NR B DTD 05/07/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS174

REVISION NR C DTD 05/18/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS182

REVISION NR B DTD 02/01/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS177

REVISION NR C DTD 05/19/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS124

REVISION NR A DTD 06/27/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS187

REVISION NR B DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS147

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS201

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS203

REVISION NR DTD 06/18/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS127

REVISION NR A DTD 02/13/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS108

REVISION NR B DTD 02/06/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS170

REVISION NR B DTD 02/01/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 1128AS124

REVISION NR DTD 12/04/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS153

REVISION NR A DTD 02/01/1985

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 30003 270AS106

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS107

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS120

REVISION NR B DTD 03/08/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS128

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS157

REVISION NR B DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS159

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS163

REVISION NR A DTD 06/19/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS165

REVISION NR A DTD 06/20/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS167

REVISION NR B DTD 11/05/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS168

REVISION NR DTD 07/15/1972

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS176

REVISION NR A DTD 06/27/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS176

REVISION NR A DTD 06/27/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS173

REVISION NR A DTD 06/20/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS202

REVISION NR DTD 06/18/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS124

REVISION NR A DTD 05/29/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS149

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS166

REVISION NR DTD 06/30/1975

IAW REFERENCE DRAWING NR 30003 270AS168

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REVISION NR A DTD 06/20/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS205

REVISION NR B DTD 12/05/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 56B6129

REVISION NR J DTD 01/17/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS103

REVISION NR B DTD 02/05/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS104

REVISION NR B DTD 08/07/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS113

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS115

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS119

REVISION NR A DTD 02/04/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS121

REVISION NR A DTD 06/27/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS122

REVISION NR B DTD 02/11/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS123

REVISION NR A DTD 05/20/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS123

REVISION NR A DTD 06/27/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS131

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS132

REVISION NR A DTD 07/01/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS135

REVISION NR A DTD 07/09/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS136

REVISION NR B DTD 03/12/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS150

REVISION NR A DTD 07/09/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS151

REVISION NR A DTD 07/09/1980

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 30003 270AS152

REVISION NR A DTD 06/18/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS161

REVISION NR B DTD 02/07/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS162

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS178

REVISION NR A DTD 07/24/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS188

REVISION NR A DTD 10/22/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS204

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 42A12989

REVISION NR K DTD 08/07/1968

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS138

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS158

REVISION NR A DTD 06/19/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS160

REVISION NR DTD 06/30/1975

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS186

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS186

REVISION NR DTD 07/15/1972

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-J-26149E NOT 2

REVISION NR E DTD 05/24/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS100

REVISION NR E DTD 05/19/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS100

REVISION NR D DTD 01/11/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS105

REVISION NR B DTD 09/07/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS133

REVISION NR B DTD 06/17/1990

IAW REFERENCE DRAWING NR 30003 270AS139

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REVISION NR A DTD 01/01/1939

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS154

REVISION NR A DTD 02/01/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS162

REVISION NR A DTD 06/19/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 270AS177

REVISION NR DTD 07/15/1972

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 0075630182 0001 EA 13.000

NSN/MATERIAL:1730001028441

DELIVERY (IN DAYS):0280

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

PREP FOR DELIVERY:

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS

SEE DLAD PROC NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0075630182 PRLI: 0001 CONT’D

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

Need Ship Date:02/01/2019 Original Required Delivery Date:09/23/2019

CONTRACTOR FIRST ARTICLE TEST - THE NUMBER OF UNITS SHOWN SIGNIFIES THE

TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS

SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.

0002 0000000000 EA 1.000

NSN/MATERIAL:0001S00000053

DELIVERY (IN DAYS):0030

THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE

CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO

NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE

ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT

THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.

THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES

THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED

BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN

SECTION A OF THIS SOLICITATION.

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

PRODUCTION LOT TEST APPROVAL - CONTRACTOR TESTING REQUIRED (REFER TO

PROCUREMENT NOTE E03 FOR ADDITIONAL INFORMATION)

0003 0000000000 EA 1.000

NSN/MATERIAL:S00000062

DELIVERY (IN DAYS):0250

THIS LINE ITEM SIGNIFIES THE PRODUCTION LOT TEST REQUIREMENT (PLT).

DELIVER FOB: ORIGIN

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: PRLI: CONT’D

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 24 PAGES

CONTINUED ON NEXT PAGE

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEPT 2013) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016)

(DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (SEP 2006) DFARS (JUN 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (DFARS)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.acquisition.gov https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 24 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

*** When creating documents in Wide Area Workflow, both an invoice and receiving report are required for origin inspection awards or awards shipping to a DLA depot for stock regardless of inspection point (see clause 252.246-7000 for additional information regarding receiving reports). For awards requiring both a receiving report and invoice, a combo type document may be used. For awards in accordance with fast payment procedures, only create an invoice and check the Fast Payment Procedure in Wide Area Workflow. See clause 252.232-7006 for further Wide Area Workflow information. For service contracts, a two-in-one invoice is required. (DoDAAC information should be completed.)***

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

____________________ *** SEE AWARD ***____________________

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award- Block 14 of 1155

Issue By DoDAAC See Block 5 of Form SF18

Admin DoDAAC See Resulting Award- Block 7 of Form 1155

Inspect By DoDAAC If at Origin- see Admin DODAAC, if at Dest- see

Ship to Ship To Code See Schedule in Section B of Form 1155 Ship From Code TBD

Mark For Code N/A

Service Approver (DoDAAC)

N/A

Service Acceptor (DoDAAC)

N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 24 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) (DFARS)

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) (DFARS)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017) (FAR)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) (FAR)

52.204–23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY

KASPERSKY LAB AND OTHER COVERED ENTITIES (JUL 2018) FAR (JUL 2018) (FAR)

As prescribed in 4.2004, insert the following clause:

(a) Definitions. As used in this clause --

Covered article means any hardware, software, or service that --

(1) Is developed or provided by a covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a covered entity.

Covered entity means --

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any covered article. The Contractor is prohibited from --

(1) Providing any covered article that the Government will use on or after October 1, 2018; and

(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement. (1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:

(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable;

supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler https://dibnet.dod.mil https://dibnet.dod.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 24 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial items.

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) (FAR)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)

52.213-4 TERMS AND CONDITIONS—SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL ITEMS) (JAN 2018) (FAR)

(c) FAR . This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR: https://www.acquisition.gov/?q=browsefar

DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES, ALT I (JUL 2014) (FAR) As prescribed in 22.1408(b), add the following as a preamble to the clause:

Notice: The following term(s) of this clause are waived for this contract: _______________ [List term(s)].

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) (FAR)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) (FAR)

52.243-1 CHANGES - FIXED PRICE (AUG 1987) (FAR)

52.246-2 INSPECTION OF SUPPLIES- FIXED PRICE (AUG 1996) (FAR)

52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) (FAR)

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (DFARS)

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) (DFARS)

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) (FAR)

https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2022_14.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 24 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(a) Definitions. As used in this provision–

“Commercial and Government Entity (CAGE) code” means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it has or does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code: ____________________

Immediate owner legal name: ______________________

(Do not use a “doing business as” name)

Is the immediate owner owned or controlled by another entity?: Yes or No.

(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code: ___________________

Highest-level owner legal name: ___________________ (Do not use a “doing business as” name)

(End of provision)

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2018) (FAR)

(a) The North American Industry classification System (NAICS) code for this acquisition is ___SEE SECTION A OF FORM SF18___ .

(2) The small business size standard is ___SEE SECTION A OF FORM SF18___.

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph

(d) of this provision instead of completing the corresponding individual representations and certification in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

[_] (i) Paragraph (d) applies.

[_] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c)(1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless --

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/FARTOCP13.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 24 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that --

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations --Representation.

(vii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(viii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(ix) 52.214-14, Place of Performance --Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(x) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xi) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xiii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-25, Affirmative Action Compliance.This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xvi) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA -designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xvii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA -designated items.

(xviii) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals -Representation. This provision applies to solicitation that include the clause at 52.204-7.

(xix) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xx) 52.225-4, Buy American --Free Trade Agreements --Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $80,317, the provision with its Alternate II applies.

https://www.acquisition.gov/sites/default/file
s/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_214.html https://www.acquisition.gov/sites/default/files/current/far/html/52_215.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.