SPE7MX21R0147.PDF

10. FOR

INFORMATION

CALL:

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

SOLICITATION, OFFER AND AWARD 1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

RATING

2. CONTRACT No.

SPE7MX-21-R-0147

3. SOLICITATION No. 4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)X

2021 SEP 22

5. DATE ISSUED

1000124792

6. REQUISITION/PURCHASE No.

7. ISSUED BY 8. ADDRESS OFFER TO

NOTE : In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in local time

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and conditions contained in this solicitation.

11. TABLE OF CONTENTS

DESCRIPTION

25. PAYMENT WILL BE MADE BY

CODE

SOLICITATION

until (Hour) (Date)

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION NOT USABLE

STANDARD FORM 33 (Rev.9-97) Prescribed by GSA FAR (48 CFR) 53.214 (c)

OFFER (Must be fully completed by offeror ) NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

AWARD (To be completed by Government)

16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(Type or print)

14. ACKNOWLEDGMENT OF AMEND-

MENTS (The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related documents numbered and dated):

12. In compliance with the above, the undersigned agrees, if this offer is accepted within period is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

CONTRACT ADMINISTRATION DATA L INSTRS., CONDS., AND NOTICES TO OFFERORS

SPECIAL CONTRACT REQUIREMENTS M EVALUATION FACTORS FOR AWARD

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

(X) PAGE(S) SEC. DESCRIPTION PAGE(S)

SUPPLIES OR SERVICES AND PRICES/COSTS PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

I CONTRACT CLAUSESSOLICITATION/CONTRACT FORM

DESCRIPTION/SPECS./WORK STATEMENT J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

PACKAGING AND MARKING PART IV - REPRESENTATIONS AND INSTRUCTIONS

DELIVERIES OR PERFORMANCE

K REPRESENTATIONS, CERTIFICATIONS AND OTHER

STATEMENTS OF OFFERORS

AMENDMENT NO. DATEAMENDMENT NO. DATE

G

H

SEC.

B

A

C

E

D

F

(X)

FACILITY

CODE

15C. CHECK IF REMITTANCE ADDRESS IS

DIFFERENT FROM ABOVE - ENTER SUCH

ADDRESS IN SCHEDULE

17. SIGNATURE

19. ACCEPTED AS TO ITEMS NUMBERED

23. SUBMIT INVOICES TO ADDRESS SHOWN IN22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

24. ADMINISTERED BY (If other than item 7) CODE CODE

27. UNITED STATES OF AMERICA

(Signature of Contracting Officer )

26. NAME OF CONTRACTING OFFICER (Type or print) calendar days (60 calendar days unless a different

15A. NAME AND

ADDRESS

OF OFFER-

OR

10 U.S.C. 2304 (c) ( 41 U.S.C. 253 (c) () )

DLA LAND AND MARITIME

LAND SUPPLIER OPERATIONS SMSG

PO BOX 3990

COLUMBUS OH 43218-3990

USA

See Continuation Sheet

Not Applicable 11:59PM 2021-Oct-22

Eukia Bryant PMCM2M3

A. NAME

Phone: 614-692-8997

B. PHONE/FAX (NO COLLECT CALLS)

Eukia.Bryant@dla.mil

C. EMAIL ADDRESS

X 1

15B. TELEPHONE NUMBER 18. OFFER DATE

28. AWARD DATE

20. AMOUNT

10 CALENDAR DAYS (%) 20 CALENDAR DAYS (%) CALENDAR DAYS (%)30 CALENDAR DAYS (%)

21. ACCOUNTING AND APPROPRIATION

ITEM

SPE7MX

EXT.NUMBERAREA CODE

(4 copies unless otherwise specified)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 59 PAGES

CONTINUED ON NEXT PAGE

SPE7MX-21-R-0147

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (AUG 2020) FAR

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS

GENERAL INFORMATION FOR OFFERORS

This solicitation is being issued under the authority established in 10 U.S. Code §2304(c)(1). This allows the Defense Logistics Agency Land & Maritime (DLA L&M) to contemplate an award to only one (1) responsible source or only from a limited number of responsible sources for this initiative, as implemented by Federal Acquisition Regulation (FAR) 6.302-1. FAR 15, Negotiation Procedures will be utilized.

DLA L&M will award an Indefinite Delivery Contract (IDC) to the responsible offeror that is most advantageous to the terms and conditions in the solicitation. This IDC will be a Firm-Fixed Price (FFP), with a three-year (3-year) base period and two (2) option periods for a potential five-year (5-year) contract.

The method used to place orders under this contract will be via Delivery Orders (DOs). The DOs may be issued using Electronic Data Interchange (EDI) or via Email (refer to Procurement Note L02). EDI invoicing is mandatory. These DOs will be for DLA Direct (stock) requirements only. The DLA L&M will be the issuing authority authorized to place DOs against this contract. Other U.S. Government agencies may be added at a later date. The quote received in response to this solicitation will be evaluated under “Best Value” procedures as described in the following pages of this solicitation.

The solicitation and all documents must be received via appropriate transmission method by 11:59 PM Eastern Standard Time (EST) on the closing date of the solicitation. Late offers should be processed in accordance with FAR 52.214-7 or 52.215-1.

First Destination Transportation and Packaging Initiative (FDTPI): This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C16 First Destination Transportation (FDT) Program, Government-Arranged Transportation for Manual Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin. For offerors whose shipments will originate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. The VSM site can be found at: https://vsm.distribution.dla.mil. Additional information about FDT can be found on the FDTPI website (http://www.

dla.mil/LandandMaritime/Business/Selling/DLA-Land-and-Maritime-Procurement-Initiatives/FDTPI/). First Destination Packaging Program (FDP) applies.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

PLEASE READ SOLICITATION IN ITS ENTIRETY. SECTIONS MAY NOT BE IN ALPHABETICAL ORDER. The clauses or provisions still apply as applicable. In the event a clause or provision is not applicable, it becomes self-deleting. All Provisions become self-deleting at the time of award.

UCF SECTION L INSTRUCTIONS FOR SUBMISSION OF OFFERS

The following method of submitting a proposal is authorized in the solicitation:

UPLOAD PROPOSAL THROUGH DIBBS (PREFERRED METHOD):

To submit an offer through DIBBS, search for the solicitation and then click the Red "Offer" button on the search results screen (Note: users must be logged in to DIBBS in order to submit the offer through DIBBS). For additional guidance, refer to https://www.dibbs.bsm.dla.mil/refs/help/Solicitations/DIBBS-Upload-Offer-User-Help.pdf

EMAIL PROPOSALS TO: Eukia.Bryant@dla.mil A single email cannot exceed 15 MB. Proposals greater than 15 MB must be divided into multiple emails.

For solicitation info, please see the point of contact listed in Block 7 for SF 1449s or Block 10 for SF33s.

***MAILED PROPOSALS ARE NOT ACCEPTABLE *** FAX PROPOSALS ARE NOT ACCEPTABLE ***HAND CARRIED PROPOSALS

ARE NOT ACCEPTABLE***

DLAD PROCUREMENT NOTES INCORPORATED BY REFERENCE

This solicitation incorporates one or more DLAD Procurement Notes by reference, with the same force and effect as if they were given in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.dla.mil/HQ/ Acquisition/Offers/eProcurement.aspx and via 'References' on the DIBBS homepage.

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 334419 applies to this solicitation. See http://www.sba.gov/content/ table-small-business-size-standards for the corresponding small business size standard.

UCF SECTION B - SCHEDULE OF SUPPLIES

SCHEDULE OF SUPPLIES

CLIN: Contract Line Item Number NSN: National Stock Number ITEM: Self-explanatory UM: Unit of Measure

PIC: Place of Inspection Code - PIC code of “2” - Inspection and Acceptance Destination

QCC: Quality Control Code for NSN:

First Position

• If letter “C” in first position - Contractor Responsibility

Second Position

• If letter “A” in second position - No Quality Subsystem Requirements

Third Position https://www.dibbs.bsm.dla.mil/refs/help/Solicitations/DIBBS-Upload-Offer-User-Help.pdf

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

• If letter “A” in the third position - No Specific Requirements

APPROVED COMMERCIAL AND GOVERNMENT ENTITY (CAGE) / PART NUMBER: CAGE code and Part Number of approved manufacture(s).

OFFERED CAGE / PART NUMBER: Contractor is to indicate the approved CAGE and Part Number proposed.

ANNUAL PRICE ADJUSTMENTS: The offeror must specify below the percentage of increase/decrease, or state “none” for the annual price adjustment for each quantity range of each year listed below. The percentage of increase/decrease (Plus/ Minus) offered by the offeror will be added/subtracted to previous year's pricing for each subsequent year thereafter to establish a unit price. Unit prices will be rounded to the nearest whole cent. Failure to accept the base year(s) may result in rejection of an offer.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

See clause 52.216-19 for further information.

UCF SECTION B CONTRACT QUANTITY LIMITATIONS

[X] (a) The quantity limitations on any contract resulting from this solicitation are as follows during the contract period*:

(1) Minimum quantity or dollar amount: $12,442.89

(2) Maximum quantity or dollar amount: $1,866,432.75

The Government is obligated to order only the minimum quantity or dollar figure stated above.

If this solicitation provides for a partial Small Business set-aside and the resulting award is made to a Contractor receiving the set-aside and non-set-aside portion, the quantities specified above for both minimum and maximum will be doubled.

[ ] (b) Multiple national stock numbers (NSNs): The NSNs or NSN groups cited in the solicitation may be split (with one or more NSNs awarded to one Contractor, one or more to another Contractor or Contractors) after evaluation of offers. If there are split awards, the contract minimum for each contract during the contract period* will become the total of the minimum

(s) for the NSNs awarded to each offeror The resulting contract minimum applies to the entire range of items awarded and does not guarantee that the Government will purchase any particular quantity or dollar amount of any individual NSN awarded.

The contract minimum will be $_________, which is the total of the minimum estimates for all NSNs. The minimum estimate for each NSN is calculated;

( ) (1) as ________ per cent of the estimated annual demand value for each item, or

( ) (2) as specified below for each NSN or NSN group

NSN Minimum Quantity or Dollar Value

The contract maximum during the contract period* will be $

[ ] (c) Multiple awards - The Government anticipates making multiple awards (awards for the same NSNs) as a result of this

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

solicitation. If multiple awards are made, the contract minimum for each award during the contract period* will be a proportion of the overall minimum cited below. For example, if two awards are made the Government is obligated to purchase half of the minimum from each awardee. Regardless of the number of awards made under this solicitation, the Government may order, and each awardee is obligated to deliver, up to the maximum cited below:

The contract minimum will be $______________________, which is the total of the minimum estimates for all NSNs. The minimum estimate for each NSN is calculated:

( ) (1) as ________ per cent of the estimated annual demand value for each item, or

( ) (2) as specified below for each NSN or NSN group

NSN Minimum Quantity Or Dollar Value

The contract maximum during the contract period* will be $ _____________________.

*Note:

(X) Contract period as defined in this clause means the extended contract shall be inclusive of any/all option periods.

( ) Contract period as defined in this clause means a separate contract period for the initial basic and each option period.

UCF SECTION B - ALL OR NONE

(a) With respect to each item or group of items identified below, offers must be submitted for all items indicated. No award will be made for less than the full requirements shown in this solicitation for these items or groups.

Group __________

Item 5996-00-619-3378

(b) Any offeror offering less than all of the solicitation requirements of the indicated item or group of items may be precluded from consideration for award if the Contracting Officer elects to make an award without opening discussions.

(c) Offerors are cautioned that submission of an offer for selected item(s) within a given group is unacceptable; offers must be for all item(s) within a given group. However, an offeror may submit an offer on any one or more groups.

UCF SECTION B ESTIMATED TOTAL QUANTITY

(a) The estimated total quantity the Government expects to order during each contract year is as follows:

Contract Line-Item Numbers (CLIN(S)) Quantity CLIN(S) Quantity

01 41

(b) In the event that this solicitation provides for a partial set-aside, the estimated total quantity for the set-aside portion is as provided in the clause entitled "Set-Aside Portion" located in Section I of the solicitation.

Note: It is anticipated that the quantities listed will remain constant for any additional option periods as provided elsewhere in this contract.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

UCF SECTION F TIME OF DELIVERY - FIXED QUANTITY

(a) Offers in response to this solicitation will be evaluated as specified in the solicitation. Delivery shall be offered in terms of a number of days after date of award. The number of delivery days required in this solicitation is calculated based on the Government's planned need and customer requirements. Unless delivery is identified elsewhere in the solicitation as an evaluation factor, Offerors are encouraged to conform their delivery terms as closely as possible to the delivery days required, and there will be no evaluation preference, or penalty for faster delivery. Offering a greater number of delivery days than the required delivery schedule may result in the offer not being considered, however the Government reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government.

Delivery is required by the Government in accordance with the following schedule:

Item Number Quantity Within number of days after date of award

0001 41 EA 223

(b) The Government may elect to consider for award only those offers that comply with the required delivery schedule but reserves the right to consider offered delivery times that exceed the number of delivery days required by the Government.

The Offeror may propose an alternative delivery schedule below. If the offeror proposes no other delivery schedule, the required delivery schedule above will apply.

Offeror's proposed delivery schedule:

Item Number Quantity Within number of days after date of award 0001 _________ ______________

(c) The Government will mail, or otherwise furnish to, the Offeror an award or notice of award not later than the day the award is dated. Therefore, the Offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails.

However, the Government will evaluate an offer that proposes delivery based on the Contractor's date of receipt of the award or notice of award by adding: five calendar days for delivery of the award through the ordinary mails, or one working day if the solicitation states that the award or notice of award will be transmitted electronically. (The term "working day" excludes weekends and United States (U.S.) Federal holidays.)

UCF SECTION F PRIORITY RATING FOR VARIOUS LONG-TERM CONTRACTS

Because this contract does not have a specified delivery date, the basic contract is not rated; however, orders placed against it that include a delivery date are rated orders under FAR 52.211-15, Defense Priority and Allocation Requirements, as of the date of receipt by the supplier.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

UCF SECTION F PRODUCTION FACILITY CHANGES

(a) The performance of any of the work contracted for in any place other than that named in the contract is prohibited unless specifically approved by the Contracting Officer. Written requests for a change in production facilities must be submitted in writing to the Contracting Officer. Changes in production facilities may be approved, provided:

(1) Performance by small business or in labor surplus areas as required by the contract will not be changed;

(2) The change will not cause a delay in delivery or necessitate a change in the purchase description;

(3) The free on board (f.o.b.) point is not changed; and

(4) Each request is supported by a price reduction of $250.00 to cover the Government's administrative costs to process the change.

(b) The Government reserves the right to deny approval even if these four elements are met.

UCF SECTION F SHIPPING INSTRUCTIONS

Shipping instructions shall be provided with individual delivery orders.

UCF SECTION F TIME OF DELIVERY - ORDERING OFFICE

Material ordered under the terms of this Contract shall be delivered within 223 days after the date of the order.

Notwithstanding any other provisions or clauses of this Contract, no deliveries shall be made prior to issuance of the delivery order on Department of Defense (DD) Form 1155.

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS DFARS 252.232-7006 (DEC 2018)

(a) Definitions. As used in this clause -- “Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall --

(1) Have a designated electronic business point of contact in the System for Award Management at https:// www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://www.acq.osd.mil/dpap/dars/d
\hich\af37\dbch\af37\loch\f37 fars/html/current/252232.htm https://www.sam.gov/ https://www.sam.gov/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items --

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

____When creating documents in WAWF, an invoice and receiving report are both required unless an exception at DFARS 232.7002(a) applies. The invoice and receiving report may be submitted separately or together as a combo type document.

See DFARS appendix F for detailed instructions on preparing the WAWF receiving report. ***NOTE: For contracts in accordance with fast payment procedures, if the customer does not have a registered acceptor in WAWF, submit a fast pay (stand alone) invoice. __

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

_ N/A for supply contracts/submit an invoice 2in1 for service contracts _______

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC See Resulting Award Issue By DoDAAC See Resulting Award Admin DoDAAC** See Resulting Award Inspect By DoDAAC See Resulting Award if applicable Ship To Code See Resulting Award if applicable Ship From Code See Resulting Award if applicable Mark For Code See Resulting Award if applicable Service Approver (DoDAAC) See Resulting Award if applicable Service Acceptor (DoDAAC) See Resulting Award if applicable Accept at Other DoDAAC See Resulting Award if applicable LPO DoDAAC See Resulting Award if applicable DCAA Auditor DoDAAC See Resulting Award if applicable Other DoDAAC(s) See Resulting Award if applicable

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

______Contact the local contract administrator found in block 6 of the DD 1155, block 9 of the SF 1449, or block 5 of the SF 26.

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

PRODUCT ITEM DESCRIPTION (PID) DATA

*** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN: 5996-00-619-3378

AMPLIFIER, ELECTRONIC CONTROL

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

APPROVED SOURCE: ONTIC (45934)

CRITICAL APPLICATION ITEM

HONEYWELL INTERNATIONAL INC. 97896 P/N B465-1-1

UNITED DYNAMICS, INC. 0XWR4 P/N 08008000-10

ONTIC ENGINEERING AND MANUFACTURING, 45934 P/N 965-3012-005

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RA001

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 59 PAGES

SPE7MX-21-R-0147

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C04 UNUSED FORMER GOVERNMENT SURPLUS PROPERTY (DEC 2016)

To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ]

The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No [ ] The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown [ ] If No, the revision does not affect form, fit, function, or interface. Yes[ ] No [ ] Unknown [ ] The material was manufactured by:

(Name):

(Address):

(2) The offeror currently possesses the material Yes [ ] No [ ]

If yes, the offeror purchased the material from a Government selling agency or other source.

Yes [ ] No [ ] If yes, provide the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source:

Address:

Date Acquired: (Month/Year)

(3) The material has been altered or modified. Yes [ ] No [ ]

If Yes, the offeror must provide the name of the company that performed the alteration or modification and attach or forward to the contracting officer a complete description of the alterations or modifications.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 59 PAGES

SPE7MX-21-R-0147

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

(4) The material has been reconditioned. Yes [ ] No [ ]

If Yes, (i) the price offered includes the cost of reconditioning /refurbishment. Yes [ ] No [ ] ; and (ii) the offeror must provide information on the company that reconditioned the material with the certifications and attach or forward to the contracting officer a complete description of any work done or to be done, including the components to be replaced and the applicable rebuild standard. The material contains cure-dated components. Yes [ ] No [ ]

If Yes, (i) the price includes replacement of cure-dated components. Yes [ ] No [ ] ; and (ii) provide cure date to the contracting officer.

5) The material has data plates attached. Yes [ ] No [ ]

If Yes, the offeror must state below all information contained thereon, or forward a copy or facsimile of the data plate to the contracting officer.

(6) The offered material is in its original package. Yes [ ] No [ ]

If Yes, the offeror has stated below all original markings and data cited on the package; or has attached or forwarded to the contracting officer a copy or facsimile of original package markings:

Contract Number

NSN

CAGE Code

Part Number

Other Markings/Data

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes [ ] No [ ]

If Yes, (i) the material being offered is from the same original Government contract number as that provided previously. Yes [ ] No [ ] ; and

(ii) state below the Government Agency and contract number under which the material was previously provided:

Agency

Contract Number

(8) The material is manufactured in accordance with a specification or drawing. Yes [ ] No [ ]

If Yes, (i) the specification/drawing is in the possession of the offeror. Yes [ ] No [ ] ; and (ii) the offeror has stated the applicable information below, or forwarded a copy or facsimile to the contracting officer. Yes [ ] No [ ]

Specification/Drawing Number

Revision (if any)

Date

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes [ ] No [ ]

If Yes, (i) material has been re-preserved. Yes [ ] No [ ] ; (ii) material has been repackaged. Yes [ ] No [ ] ; (iii) percentage of material that has been inspected is %; and/or (iv) number of items inspected is ; and (v) a written report was prepared. Yes [ ] No [ ] ; and if Yes, the offeror has attached the written report or forwarded it to the contracting officer. Yes[ ] No[ ]

The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror has attached or forwarded to the contracting officer one of the following, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

[ ] For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

[ ] For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

[ ] When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number.

(This information has already been provided in paragraph (c)(6) of this clause. Yes [ ] No [ ] .)

[ ] When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe and/or attach.

This only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 59 PAGES

SPE7MX-21-R-0147

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (JUN 2020)

C01 SUPERSEDED PART NUMBERED ITEMS (SEP 2016)

C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE

MATERIALS OR COMPONENTS (DEC 2016)

C14 CORRECTION OF NONCONFORMING PACKAGING OR MARKING (MAY 2020)

C20 VENDOR SHIPMENT MODULE (VSM) (JUN 2020)

C16 FIRST DESTINATION TRANSPORTATION PROGRAM, GOVERNMENT ARRANGED TRANSPORTATION FOR MANUAL AWARDS

(AUG 2017)

C07 WARSTOPPER PROGRAM MATERIAL BUFFER AVAILABILITY (JAN 2021)

SECTION D - PACKAGING AND MARKING

252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (DEC 2019) DFARS

(a) Definitions. As used in this clause --

“Advance shipment notice” means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

“Bulk commodities” means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

“Case” means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

“Electronic Product Code™ (EPC)” means an identification scheme for universally identifying physical objects via RFID tags and other means.

The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user-defined data. The EPC Tag Data Standards will define the length and position of this data, without defining its content.

“EPCglobal®” means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

“Exterior container” means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 59 PAGES

SPE7MX-21-R-0147

SECTION D - PACKAGING AND MARKING (CONTINUED)

“Palletized unit load” means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

“Passive RFID tag” means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags that meet the EPCglobal™ Class 1 Generation 2 standard.

“Radio frequency identification (RFID)” means an automatic identification and data capture technology comprising one or more reader/ interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

“Shipping container” means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that --

(i) Are in any of the following classes of supply, as defined in DoD Manual 4140.01, Volume 6, DoD Supply Chain Materiel Management Procedures: Materiel Returns, Retention, and Disposition:

(A) Subclass of Class I - Packaged operational rations.

(B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP - Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV - Construction and barrier materials.

(E) Class VI - Personal demand items (non-military sales items).

(F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents - suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX - Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at https://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html or to --

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to --

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number Location Name City State DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures.

(c) The Contractor shall --

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129 (Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC™ Tag Data Standards in effect at the time of contract award. The EPC™ Tag Data Standards are available at http://www.gs1.org/epc-rfid.

(1) If the Contractor is an EPCglobal™ subscriber and possesses a unique EPC™ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC™ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located in the DoD Suppliers' Passive RFID Information Guide at http://www.acq.osd.mil/log/sci/ait.html. If the Contractor uses a third-party packaging house to encode its tags, the https://www.acq.osd.mil/log/sci/RFID_ship-to-locations.html http://www.gs1.org/epc-rfid http://www.acq.osd.mil/log/sci/ait.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 59 PAGES

SPE7MX-21-R-0147

SECTION D - PACKAGING AND MARKING (CONTINUED)

CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1).

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

(End of clause)

SECTION E - INSPECTION AND ACCEPTANCE

E07 EVALUATION FACTOR FOR ORIGIN INSPECTION (JAN 2018)

52.246-1 CONTRACTOR INSPECTION REQUIREMENTS (APR 1984) FAR

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-16 RESPONSIBILITY FOR SUPPLIES (APR 1984) FAR

SECTION F - DELIVERIES OR PERFORMANCE

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-60 GUARANTEED SHIPPING CHARACTERISTICS (JAN 2017) FAR

(a) The offeror is requested to complete paragraph (a)(1) of this clause, for each part or component which is packed or packaged separately.

This information will be used to determine transportation costs for evaluation purposes. If the offeror does not furnish sufficient data in paragraph (a)(1) of this clause, to permit determination by the Government of the item shipping costs, evaluation will be based on the shipping characteristics submitted by the offeror whose offer produces the highest transportation costs or in the absence thereof, by the Contracting Officer's best estimate of the actual transportation costs. If the item shipping costs, based on the actual shipping characteristics, exceed the item shipping costs used for evaluation purposes, the Contractor agrees that the contract price shall be reduced by an amount equal to the difference between the transportation costs actually incurred, and the costs which would have been incurred if the evaluated shipping characteristics had been accurate.

(1) To be completed by the offeror:

(i) Type of container: Wood Box [ ] Fiber Box [ ], Barrel [ ], Reel [ ], Drum [ ], Other (Specify) ;

(ii) Shipping configuration: Knocked-down [ ], Set-up [ ], Nested [ ], Other (specify) ;

(iii) Size of container: ” (Length), × ” (Width), × ” (Height) = Cubic Ft;

(iv) Number of items per container each;

(v) Gross weight of container and contents Lbs;

(vi) Palletized/skidded [ ] Yes [ ] No;

(vii) Number of containers per pallet/skid ;

(viii) Weight of empty pallet bottom/skid and sides Lbs;

(ix) Size of pallet/skid and contents Lbs Cube ;

(x) Number of containers or pallets/skids per railcar *

(A) Size of railcar

(B) Type of railcar

(xi) Number of containers or pallets/skids per trailer *

(A) Size of trailer Ft https://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 59 PAGES

SPE7MX-21-R-0147

SECTION F - DELIVERIES OR PERFORMANCE (CONTINUED)

(B) Type of trailer

* Number of complete units (line item) to be shipped in carrier's equipment.

(2) To be completed by the Government after evaluation but before contract award:

(i) Rate used in evaluation ;

(ii) Tender/Tariff ;

(iii) Item .

(b) The guaranteed shipping characteristics requested in paragraph (a)(1) of this clause do not establish actual transportation requirements, which are specified elsewhere in this solicitation. The guaranteed shipping characteristics will be used only for the purpose of evaluating offers and establishing any liability of the successful offeror for increased transportation costs resulting from actual shipping characteristics which differ from those used for evaluation in accordance with paragraph (a) of this clause.

SECTION H - SPECIAL CONTRACT REQUIREMENTS

252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS

(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.

(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:

(1) Federal Insecticide, Fungicide and Rodenticide Act;

(2) Federal Food, Drug and Cosmetics Act;

(3) Consumer Product Safety Act;

(4) Federal Hazardous Substances Act; or

(5) Federal Alcohol Administration Act.

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL

(If None, Insert “None.”) ACT

(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph

(c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.

(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).

SECTION I - CONTRACT CLAUSES

52.202-1 DEFINITIONS (JUN 2020) FAR

52.203-3 GRATUITIES (APR 1984) FAR

52.203-5 COVENANT AGAINST CONTINGENT FEES (MAY 2014) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 59 PAGES

SPE7MX-21-R-0147

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020) FAR

52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES TO THE GOVERNMENT (JUN 2020), ALT I (OCT 1995) FAR

52.203-7 ANTI-KICKBACK PROCEDURES (JUN 2020) FAR

52.203-8 CANCELLATION, RECISSION, AND RECOVERY OF FUNDS FOR ILLEGAL OR IMPROPER ACTIVITY (MAY…