CM18310002 Market Research LTC Questionnaire.pdf

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 1

DEFENSE LOGISTICS AGENCY

DLA LAND and MARITIME

POST OFFICE BOX 3990

COLUMBUS, OH 43218–3990

CM18310002 February 11, 2020

Strategic Acquisition Programs Directorate (SAPD) Long Term Contract Market Research Questionnaire

DLA Land and Maritime is considering a solicitation and subsequent Award of an Indefinite Quantity Contract (IQC) or Long Term Contract (LTC) for the items listed the attached spreadsheet. Procurement Item Descriptions can be found at the end of this document. As a potential supplier of these items, we are asking that you fill out this market survey to the best of your knowledge so that we can generate a realistic and beneficial solicitation. Should any of the survey questions not apply, please skip over that section. Feel free to contact the sender of this survey if you have any questions.

Request that you return the survey to robert.varcho@dla.mil within 7 business days of receipt. We sincerely appreciate your time.

Company Name: , Cage Code: Phone: Email, Name & Signature:

I. GENERAL QUESTIONS:

1. Please check your companies size and status:

a. Large or Small Business

b. Approx. how many employees do you currently have?

c. How are you classified by the Small Business Administration (SBA)? E.g. 8(a), Hubzone, Woman Owned, Service-

Disabled, Veteran-Owned, etc.

Please specify:

d. Are you a: Manufacturer or Distributor/Dealer

e. If you are the manufacturer of these items, do you quote directly to the Government? Yes No

f. If you are the manufacturer but do not quote directly to the Government, can you name your preferred dealer(s)?

Dealer Name:

Dealer Cage Code:

g. If you are a Distributor/Dealer for the actual Manufacturer of these items, please provide additional information below:

Manufacturer Name:

Manufacturer Cage Code:

Is the Manufacturer a Small Business? Yes No

If yes: How are they classified by the Small Business Administration?

Approx. how many employees do they have? Unknown?

II. LONG TERM CONTRACT RELATED QUESTIONS:

1. Is your company interested in pursuing a Long-Term Contract for any or all of these items? Yes No

a. If no, please explain.

2. Is a three year base period with single option years thereafter agreeable? Yes No

a. If no, please explain.

b. Does your company have an “ideal” or preferred base period?

1 2 3 No preference (e.g. Number of Base Years does not affect Price)

3. Do any of the items on the attached spreadsheet qualify for Quantity Price Breaks? Yes No

a. If yes, please annotate accordingly.

4. Are there any items that you would recommend adding to/deleting from this LTC project? Yes No

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 2

a. If yes, please explain:

III. COST OR PRICING DATA OR INFORMATION OTHER THAN COST OR PRICING DATA:

* The following pertain to the requirement for certified Cost or Pricing Data or Information Other Than Cost or Pricing Data. For contracts estimated over $2,000,000*, certified Cost or Pricing Data “may” be required. Contractors are greatly encouraged to view the sample format found at http://www.dcaa.mil to understand the in depth information required for submission.

Cost or pricing data is not required for commercial items. However, it is the contracting officer’s authority to determine an item(s) commercial or not. A failure to provide adequate cost or pricing data upon receipt of your proposal may result in the solicitation being cancelled with no award being made.

1. Do you fully understand the requirements for Certified Cost or Pricing Data or Information Other Than Cost or Pricing Data and are willing and able to provide such requirements? Yes No

a. Have you provided Certified Cost or Pricing Data to DLA in the past? Yes No

i. If yes, please provide the most recent contract number or audit number for which you submitted this information: Contract Number and/or Audit Number

ii. Would you be able to provide data from your subcontractors if needed? Yes No

2. If you are a dealer, will you be able to obtain Cost or Pricing Data from the actual manufacturer? Yes No

IV. COMMERCIAL QUESTIONS:

* It is the Contracting Officer’s authority to determine an item(s) commercial or not and if the commercial price(s) are Fair and Reasonable. This is usually accomplished through proof that commercial market forces have driven the setting of the commercial price.

Such proof would describe the commercial market acceptance of the price or, more plainly, invoices proving that the item has been sold commercially at like prices, for like quantities. Without proof of commerciality the IDC project cannot be processed as a commercial procurement (FAR Part 12), but will rather be processed using non-commercial procurement procedures (FAR Part 15).

1. Are any of these items Commercial Items per FAR 2.101(b)? Yes No

2. If yes, is your company willing and able to provide evidence of commercial sales and support needed to verify price reasonableness? Yes No Documentation that would potentially help support your commerciality claim may include but is not limited to:

1. Published Catalogs/Price Lists

2. Un-Redacted Commercial sales history (e.g. Invoices showing sales to companies outside of Federal, State or Local Government, etc.). The importance of provided un-redacted invoices is to assist in proving the item(s) have been sold commercially at like prices and for like quantities.

3. Complete set of Drawings. You may mark your drawings as “Proprietary and Confidential” as the Government will only use them for determination of Price Reasonableness.

4. Proof of availability or announcement of the Commercial Item to the general public

VII. DELIVERY QUESTIONS:

1. Are there production limitations for any of the item(s) of which we are requesting information? Yes No If yes, please annotate on the attached spreadsheet.

2. Would a minimum delivery order quantity and/or dollar value apply to these NSNs? Yes No

If yes, please annotate on the attached spreadsheet.

VIII. ADDITIONAL INFORMATION/INPUT:

It is always the Defense Logistics Agency’s intent to produce Contracts that are advantageous to both the Warfighter and the Contractor. This is best achieved through open lines of communication and informative feedback. Please provide any additional information that you feel may be of assistance in building our Acquisition Strategy and possible Solicitation development.

http://www.dcaa.mil/

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 3

Procurement Item Description (PID), Packaging and Marking:

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

CLIN 0001: NSN: 5960-01-067-1356

ELECTRON TUBE, TRIODE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

ENVELOPE MATERIAL: CERAMIC AND METAL

PACK AND MARK IAW MIL E 75 (MIL DTL 75J)

MARK: FRAGILE ELECTRON TUBE CERAMIC, CLEARLY

MARK TOP: "TOP!" AND USE UP ARROWS ALL 4 SIDES

QUALIFICATION AND PRODUCTION ACCEPTANCE MUST

BE IAW MIL E 1 (PER SPEC CONTROL REFERENCE)

OR MIL PRF 1M.

REFERENCE NUMBER:E0116

CRITICAL APPLICATION ITEM

COMMUNICATIONS & POWER INDUSTRIES 06980 P/N Y-739G

NAVCOM DEFENSE ELECTRONICS, INC. 57057 P/N 8829400007-1

PREP FOR DELIVERY

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP: 001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ED OPI:A

INTRMDTE CONT:E5 INTRMDTE CONT QTY:020

PACK CODE = E: PACKING LEVEL = B:

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 4

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:37 -37 Fragile, arrow up

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ALL ZZ CODES SHALL REFER TO THE CITED

MILITARY SPECIFICATION BELOW FOR REQUIREMENTS:

REFERENCE NUMBER:J5960

REFERENCE NUMBER:IP025

CLIN 0002: NSN: 5960-01-071-3338

ELECTRON TUBE, TRIODE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZD025

ENVELOPE MATERIAL: CERAMIC AND METAL

REFERENCE NUMBER:E0166

ITEM IS USED IN A CRITICAL APPLICATION.

REFERENCE NUMBER:J5960

REFERENCE NUMBER:J0001

CONTRACTOR SHALL MAINTAIN A CALIBRATION

SYSTEM IAW ISO 100-12-1.

ITEM DOES NOT CONTAIN ENOUGH RADIATION TO

REQUIRE SPECIAL PACKAGING OR A MATERIAL

SAFETY DATA SHEET.

CRITICAL APPLICATION ITEM

RAYTHEON COMPANY DBA RAYTHEON 05869 P/N 713092-1

COMMUNICATIONS POWER INDUSTRIES C5845 P/N Y678

PREP FOR DELIVERY

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 5

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:100

PACK CODE = E: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:37 -37 Fragile, arrow up

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

PACKAGE IAW GROUP # 1

REFERENCE NUMBER:J5960

REFERENCE NUMBER:ZD079

REFERENCE NUMBER:IP025

CLIN 0003: NSN: 5960-01-230-8457

ELECTRON TUBE, MULTIPACTOR.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:ZD072

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CA060

CRITICAL APPLICATION ITEM

COMMUNICATIONS POWER INDUSTRIES 88236 P/N 1789H

PREP FOR DELIVERY

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE = Z: PACKING LEVEL = B:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 6

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ALL ZZ CODES SHALL REFER TO PRESERVATION, PACKAGING, AND PACKING SHALL

BE IN ACCORDANCE WITH THE FOLLOWING:

REFERENCE NUMBER:J0016

REFERENCE NUMBER:IP025

ZZ - SPECIAL MARKING REQUIREMENTS:

36 - FRAGILE, ARROW UP, AND GLASS

OPEN THIS SIDE

WHEN SPECIFIED/REQUIRED: PER MIL-STD-129,

SERIAL NUMBER SHALL BE MARKED ON THE UNIT,

INTERMEDIATE, AND SHIPPING CONTAINERS.

IF SERIAL NUMBER MARKING REQUIRED, THE

PACKING LIST SHALL CONTAIN SERIAL NUMBERS

PER MIL-STD-129R, PARAGRAPHS 5.4.1.2.1 AND

5.4.1.2.2.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES:

This national stock number and/or associated data has been determined to contain, utilize, or generate covered defense information (CDI). CDI is unclassified controlled technical information or other information, as described in the controlled unclassified information (CUI) registry that requires safeguarding pursuant to DFARS 252.204-7012.

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 7

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 8

REFERENCE NUMBER E0116

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

REFERENCE NUMBER J5960

PRESERVATION AND PACKAGING SHALL BE IAW THE

LATEST REVISION OF MILITARY SPECIFICATION:

MIL-DTL-75, FOR ELECTRON TUBES.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER E0166

"ANY TECHNICAL DATA PROVIDED AS A RESULT OF THIS

SOLICITATION IS NOT COMPLETE AND WILL BE PRO-

VIDED FOR REFERENCE PURPOSES ONLY."

REFERENCE NUMBER J0001

ADDITIONAL SPECIAL MARKING REQUIREMENTS:

36 - FRAGILE, ARROW UP, AND GLASS.

REFERENCE NUMBER ZD079

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

REFERENCE NUMBER ZD072

Hazard Communication Standard Notice:

Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 9

The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals.

As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.

In accordance with the revised standard after June 1, 2015:

1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.

2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.

3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R.

1910.1200.

For more information on SDS, refer to OSHAs website, available at:

https://www.osha.gov/law-regs.html

For information on 29 C.F.R. 1910.1200, refer to the below link:

https://www.osha.gov/dsg/hazcom/index.html

REFERENCE NUMBER CA060

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

REFERENCE NUMBER J0016

SPECIAL PACKAGING INSTRUCTION (SPI) J001614933

APPLICABLE REGULATIONS:

THE FOLLOWING REGULATIONS SHALL BE USED FOR THE

PACKAGING, PACKING, SHIELDING, AND MARKING OF

MAGNETIZED MATERIAL. THE FOLLOWING GUIDELINES

ARE FOR INFORMATION ONLY:

I. CODE OF FEDERAL REGULATIONS, TITLE 49

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 10

. A. 172.101 HAZARDOUS MATERIAL TABLE

. B. 173.21(D)

II. DANGEROUS GOODS REGULATION (IATA)

. A. SECTION 1 - APPLICABILITY

. B. SECTION 2 - LIMITATIONS

. 1. PARAGRAPH 2.9.4 - LIST OF OPERATOR

VARIATIONS (CI-01)

. C. SECTION 3 - CLASSIFICATION

. 1. PARAGRAPH 3.9.1.3 - MAGNETIZED

MATERIAL

. D. SECTION 4 - IDENTIFICATION

. 1. PARAGRAPH 4.2 - LIST OF DANGEROUS

GOODS

. E. SECTION 5 - PACKING

. 1. PACKING INSTRUCTION 902

. F. SECTION 7 - MARKING AND LABELING

. 1. PARAGRAPH 7.1.5 - PACKAGING USE

MARKING (PACKAGES AND OVERPACKS)

. 2. PARAGRAPH 7.1.6 - PACKAGE

ORIENTATION MARKING

. 3. PARAGRAPH 7.2.2 - QUALITY AND

SPECIFICATIONS OF LABELS

. 4. PARAGRAPH 7.2.3 - APPLICABILITY

OF HAZARD LABELS

. 5. PARAGRAPH 7.2.4 - HANDLING LABELS

(7.2.4.2)

. 6. PARAGRAPH 7.2.6 - AFFIXING OF

LABELS

. G. SECTION 8 - DOCUMENTATION

. 1. PARAGRAPH 8.1.3 - PROPER SHIPPING

NAME

. H. SECTION 9 - HANDLING

. 1. PARAGRAPH 9.3.14 - LOADING OF

MAGNETIZED MATERIAL

. I. SECTION 10 - PACKAGING SPECIFICATION

AND PERFORMANCE TESTS

MAGNETIZED MATERIAL MARKING:

MAGNETIZED MATERIAL MARKING SHALL BE AS FOLLOWS:

. A. NO MAGNETIC MARKING REQUIREMENT FOR AIR

OR SURFACE TRANSPORT; FOR MAGNETIC FIELD

STRENGTHS LESS THAN 0.002 GAUSS AT 7 FEET FROM

THE ITEM WITHOUT ANY COMPASS DEVIATION.

. B. FOR MAGNETIC FIELD STRENGTHS NOT

GREATER THAN 0.00525 GAUSS AT 15 FEET, AND

NOT GREATER THAN 0.002 GAUSS AT 7 FEET, WITH A

COMPASS DEVIAITON OF 2 DEGREES OR LESS:

. 1. THE AIR TRANSPORT REQUIRES A

MAGNETIZED MATERIAL LABEL AND A PROPER SHIPPING

NAME.

Source Selection Information – See FAR 2.101 and 3.104. For Official Use Only Page | 11

. 2. NO MAGNETIC MARKING REQUIREMENT FOR

SURFACE TRANSPORT.

. C. FOR MAGNETIZED MATERIAL GREATER THAN

0.00525 GAUSS AT 15 FEET, WITH A COMPASS

DEVIATION GREATER THAN 2 DEGREES:

. 1. SHALL BE SHIELDED WITH MANUFACTURER'S

STANDARD 26 GAGE (0.0179 INCHES) LOW CARBON

STEEL IN ACCORDANCE WITH ASTM-A568.

. D. ADDTIONAL AIR TRANSPORT REQUIREMENTS:

. 1. MAGNETIZED MATERIAL LABEL

. 2. PROPER SHIPPING NAME

. 3. UN NUMBER

. 4. MARKING SHALL BE IN ACCORDANCE WITH

MIL-STD-129 (MARKING FOR SHIPMENT AND STORAGE)

INCLUDING MANUFACTURER'S CAGE CODE AND THE SAME

COMMERCIAL OR OFF-THE-SHELF PART, TYPE, OR

DESIGN CONTROL NUMBER AS IT APPEARS ON THE

CONTRACT OR ORDER.

BAR CODE MARKING:

BAR CODE MARKING IS REQUIRED FOR ALL SHIPMENTS

AND SHALL BE APPLIED IN ACCORDANCE WITH AIM BC1

AND MIL-STD-129.

EXCLUDED FROM BAR CODE MARKING:

. 1. EXTERIOR CONTAINER OF UNRELATED

ITEMS WHEN CONSOLIDATED INTO A SINGLE

"MULTIPACK" SHIPPING CONTAINER.

MATERIAL SAFETY DATA SHEET (MSDS) & HAZARD

WARNING LABEL (HWL):

THE ABOVE PACKAGING AND MARKING INSTRUCTIONS ARE

IN ADDITION TO AND DO NOT SUPERSEDE THE REQUIRE-

MENTS TO FURNISH A MSDS AND HWL(S) AS DIRECTED

BY FARS 52.223-3, HAZARDOUS MATERIAL IDENTIFI-

CATION AND MATERIAL SAFETY DATA (JAN 1997) AND

DFARS 252.223-7001, HAZARD WARNING LABELS

(DEC 1991).

THE CONTRACTOR SHALL SUBMIT A COMPLETED MSDS

WITH APPLICABLE HWL(S) IN ACCORDANCE WITH

FED-STD-313. THE CONTRACTOR SHALL IDENTIFY THE

MAGNETIC FIELD STRENGTH WITHIN SECTION 3

(PHYSICAL AND CHEMICAL DATA) OF THE MSDS.

THE MSDS AND APPLICABLE HWL(S) SHALL BE REQUIRED

TO BE SUBMITTED BY THE APPARENTLY SUCCESFUL

OFFEROR AND SHALL BE EVALUATED/APPROVED BY

DSCC-VSS, PRIOR TO CONTRACT AWARD.