PID and Packaging--SPE7LX20R0050.pdf

PID and Packaging‐‐SPE7LX20R0050 *** LTC PID Packaging Consolidated Text ***

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM

DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:010314696

SPINDLE,WHEEL,DRIVING‐NONDRIVING

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ012

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19206 11578925

REVISION NR F DTD 01/12/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 8769470

REVISION NR P DTD 01/27/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 7309999

REVISION NR T DTD 06/09/2016

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 8769470

REVISION NR D DTD 01/27/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11579255

REVISION NR B DTD 10/24/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 QAP‐APPX‐WVA

REVISION NR DTD

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 7309999

REVISION NR M DTD 12/09/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 7309999

REVISION NR P DTD 12/09/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 8769067

REVISION NR P DTD 05/16/2017

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 11579254

REVISION NR F DTD 10/02/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11579254

REVISION NR B DTD 11/27/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11578925

REVISION NR DTD 10/12/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 11578923

REVISION NR R DTD 07/15/2010

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 11578923

REVISION NR AG DTD 07/15/2010

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 11578925

REVISION NR G DTD 11/14/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11578925

REVISION NR F DTD 11/14/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11578926

REVISION NR F DTD 09/23/1991

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 11578926

REVISION NR M DTD 03/31/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11584646

REVISION NR A DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11584647

REVISION NR A DTD 05/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11585479

REVISION NR E DTD 04/19/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11586083

REVISION NR A DTD 10/15/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11586084

REVISION NR A DTD 10/15/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11586086

REVISION NR A DTD 10/15/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 8776047

REVISION NR B DTD 08/13/1971

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1NUW7 L09A1005

REVISION NR F DTD 03/23/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11578923

REVISION NR AG DTD 07/15/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11586085

REVISION NR A DTD 10/15/1979

PART PIECE NUMBER:

IAW REFERENCE QAP 19206 11578525

REVISION NR F DTD 09/17/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19206 11579255

REVISION NR B DTD 10/24/1985

PART PIECE NUMBER:

IAW REFERENCE QAP 1NUW7 QAP‐APPX‐BL

REVISION NR DTD 07/31/2001

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA‐QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED‐STD‐313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED‐STD‐313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All Section “D” Packaging and Marking Clauses take precedence over ASTM

D3951 The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RD002

THIS NATIONAL STOCK NUMBER AND/OR ASSOCIATED DATA HAS

BEEN DETERMINED TO CONTAIN, UTILIZE, OR GENERATE

COVERED DEFENSE INFORMATION (CDI). CDI IS UNCLASSIFIED

CONTROLLED TECHNICAL INFORMATION OR OTHER INFORMATION<(>,<)>

AS DESCRIBED IN THE CONTROLLED UNCLASSIFIED INFORMATION

(CUI) REGISTRY THAT REQUIRES SAFEGUARDING PURSUANT TO

DFARS 252.204‐7012.

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export‐control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

REFERENCE NUMBER ZD004

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW‐ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON‐ACCEPTED SUPPLIES

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON‐MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT ‐ ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ012

RQ012: QUALIFIED PRODUCTS LIST (QPL) CONNECTOR ASSEMBLIES AND QPL

ELECTRICAL CONTACTS. THIS IS A QUALIFIED ITEM. QUALIFICATION

REQUIREMENTS IN PROCUREMENT NOTE H01 "QUALIFIED PRODUCTS LIST (QPL) FOR

FEDERAL STOCK CLASS (FSC) 5935 CONNECTOR ASSEMBLIES AND CONTACTS" APPLY.

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS