Project_CL19008002.rtf

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:013828728

HALFSHAFT ASSEMBLY, CONSTANT VELOCITY DR. SHAFT

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:CS147

REFERENCE NUMBER:CS001

EXCEPTION TO DRAWING 12342974: GKN HAS CHANGED

THEIR P/N FROM 298-0301 TO 298-0106.

CRITICAL APPLICATION ITEM

GKN DRIVELINE NORTH AMERICA INC. 62826 P/N 12342974-2

GKN DRIVELINE NORTH AMERICA INC. 62826 P/N 298-0106

IAW BASIC DRAWING NR 19207 12341985

REVISION NR G DTD 01/15/2007

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12341985

REVISION NR B DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K0274

REVISION NR DTD 12/16/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K0275

REVISION NR DTD 12/16/1993

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12342974

REVISION NR C DTD 07/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342974

REVISION NR C DTD 01/03/2003

PART PIECE NUMBER: 12342974-2

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR H DTD 09/24/2018

PART PIECE NUMBER:

IAW REFERENCE UNK DI-NDTI-80809B NOT 1

REVISION NR B DTD 08/27/2014

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53022-14 NOT 1

REVISION NR 14 DTD 01/25/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53030-7 NOT 1

REVISION NR 7 DTD 02/07/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53039-22 NOT 1

REVISION NR 22 DTD 03/04/2009

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53084-6 NOT 1

REVISION NR 6 DTD 06/16/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-64159-13 NOT 1

REVISION NR 1 DTD 03/16/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12338284

REVISION NR P DTD 07/31/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12341985-4

REVISION NR DTD 09/08/2017

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GC CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:Z

UNIT CONT:ED OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION SHALL AFFORD

ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM

CONTAINED WITHIN THE KIT.

NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel.

ADDITIONAL SPECIAL MARKING REQUIREMENTS:

02 - ARROW UP;

OPEN THIS SIDE.

SEGREGATION AND INDIVIDUAL IDENTIFICATION

REQUIREMENTS ARE LISTED IN MIL-STD-2073-1<(>,<)>

APPENDIX D, PARAGRAPH D.4.2.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH PACKAGE.

REFERENCE NUMBER:IP025

NSN:013832387

PARTS KIT, CONSTANT VELOCITY DRIVE SHAFT. (HALF SHAFT ASSEMBLY)

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS120

TRACEABILITY DOCUMENTATION IN ACCORDANCE WITH DLAD CLAUSE 52.246-9042

APPLIES.

CRITICAL APPLICATION ITEM

GKN DRIVELINE NORTH AMERICA INC. 62826 P/N 298-0107

IAW BASIC DRAWING NR 19207 12342974

REVISION NR D DTD 07/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K0274

REVISION NR DTD 12/16/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR H DTD 09/24/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K0275

REVISION NR DTD 12/16/1993

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12342974

REVISION NR C DTD 07/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369003

REVISION NR H DTD 09/24/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12338284

REVISION NR P DTD 07/31/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342974-1

REVISION NR DTD 03/22/2019

PART PIECE NUMBER:

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ED OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH

KIT. IF APPLICABLE, ASSEMBLY INSTRUCTIONS

SHALL ALSO BE INCLUDED WITHIN EACH PACKAGE.

PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION SHALL AFFORD

ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM

CONTAINED WITHIN THE KIT.

NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting by user or depot personnel.

ADDITIONAL SPECIAL MARKING REQUIREMENTS:

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH PACKAGE.

REFERENCE NUMBER:IP025

NSN:014745706

PROPELLER SHAFT WIT

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CA060

GKN DRIVELINE NORTH AMERICA INC. 62826 P/N 299 0158

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GC CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:X

UNIT CONT:FC OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:13 -13 Open this side

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:IP025

NSN:014745708

BOOT,POWER TRANSMISSION COMPONENTS

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

(PARTS KIT,HALF SHAF)

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA060

GKN WALTERSCHEID, INC. 6KED7 P/N 10237954

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:AD CUSH/DUNN THKNESS:X

UNIT CONT:FC OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

REFERENCE NUMBER:CS259

Unit of issue is "KT" (kit).

PER MIL-STD-2073-1D, APPENDIX D, PARAGRAPH

D.3.1.b: METHOD OF PRESERVATION SHALL AFFORD

ADEQUATE PROTECTION TO THE MOST CRITICAL ITEM

CONTAINED WITHIN THE KIT.

NOTE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

NOTE: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting by user or depot personnel.

ADDITIONAL SPECIAL MARKING REQUIREMENTS:

13 - OPEN THIS SIDE.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH PACKAGE.

REFERENCE NUMBER:IP025

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER RQ017

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER CS001

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and cannot be exported without the authorization of either the Department of State or the Department of Commerce prior to export. Export includes disclosure of technical data to foreign nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees or U.S. companies and their foreign subsidiaries.

DLA has enhanced its Joint Certification Program (JCP) registration and validation procedures. Selected National Stock Numbers (NSNs) will require additional permissions to access the associated technical data.

In the event a vendor cannot access the technical data for a NSN in DLA cFolders, the vendor must submit a onetime request to jcpvalidation@dla.mil for technical data access consideration. If a vendor has inquiries after having submitted required information to the JCP office, these inquiries are to be directed to DLAJ344DataCustodian@dla.mil.

DLA processes the vendor's technical data request on a first come, first served basis. Failure to comply timely with required information may result in lack of consideration for DLA solicitations. It is vitally important that vendors provide correct company official name(s) and contact information in all correspondence. DLA will work diligently on validating vendor requests. Vendors will be notified within 3 business days of when their requests were approved. However, DLA cannot guarantee that it can complete all validation requests by the due date for any solicitation responses.

REFERENCE NUMBER CS259

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER CS120

NOTE: THE CITED DRAWING IS A SOURCE CONTROLLED

DRAWING AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED ON THE DRAWING HAVE

BEEN APPROVED. EVEN THOUGH SOURCES AND APPROVED

PART NUMBERS ARE PROVIDED, THE ITEMS

FURNISHED MUST MEET THE REQUIREMENTS OF THE

CITED DRAWING. OFFERORS WHO ARE INTERESTED IN

QUALIFYING THEIR PRODUCT FOR PURPOSE OF FUTURE

ACQUISITION MUST CONTACT THE COGNIZANT DESIGN

ACTIVITY SPECIFIED ON THE SOURCE CONTROLLED

DRAWING.

ALSO, MAY INCLUDE ADDITIONAL APPROVED SOURCES

THAT HAVE NOT BEEN REFLECTED ON THE DRAWING AT

THIS TIME.

REFERENCE NUMBER CA060

NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS

REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED AND ALTERNATE

PART FOR EVALUATION.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).