CL17285006_FedBizOps_Synopsis_Attachment.docx

CL17285006 Procurement Item and Packaging

PARTS KIT<(>,<)> GUN. SEAL REPLACEMENT.

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

KIT QUALITY PROVISION

1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED

TO THE GOVERNMENT AS A KIT.

2. THE CONTRACTOR SHALL COMPLY WITH ALL

APPLICABLE QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS FOR THE KIT COMPONENTS BEING

SUPPLIED.

3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR

OBTAINING, HANDLING AND SUPPLYING ORIGINAL

EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS

INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH

ITS VENDORS.

4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION

SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL

PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH

REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT

DAMAGED.

5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR

PROCESS THAT WILL ENSURE TRACEABILITY OF ALL

PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE

MANUFACTURER.

6. THE CONTRACTOR'S INSPECTION SYSTEM AND

PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL

BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE

REQUEST OF THE CONTRACTING OFFICER.

7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS

THAT ARE KNOWN TO BE ACCEPTABLE TO THE

GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED

SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS

REFLECTED IN THE GOVERNMENT'S CONTRACT

TECHNICAL DATA FILE (CTDF).

8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE

CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY

ONLY NEW AND UNUSED PARTS THAT ARE NOT

GOVERNMENT SURPLUS PARTS.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

BRIGHTON CROMWELL LLC 3NNX8 P/N 8305869

SEY TEC, INC. 0FGC4 P/N 8305869

Pattonair Usa, Inc. DBA Pattonair 046U2 P/N 8305869 Balance Enterprise Solutions LLC 8A2B1 P/N 8305869

IAW REFERENCE DRAWING NR 53711 8305853

REVISION NR B DTD 07/24/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 8305869

REVISION NR DTD 01/20/2011

PART PIECE NUMBER:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".