SPE7L318Q0834.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE7L3-18-Q-0834

2. DATE ISSUED

2018 JUN 19

3. REQUISITION/PURCHASE REQUEST NO.

See Schedule

RATING

DO-C9

DLA LAND AND MARITIME

LAND SUPPLIER OPNS VEHICLE SPT

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Buyer: John McCluskey PLCLBBC Tel: 614-692-9935 Fax: 614-693-1573 Email: John.McCluskey@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 JUN 29

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 36 PAGES

SPE7L3-18-Q-0834

CONTINUED ON NEXT PAGE

THIS SOLICITATION IS ISSUED UNDER SPECIAL EMERGENCY PROCUREMENT AUTHORITY

A classified drawing forms a part of this data package and will be supplied upon award only following receipt of completed DD form 254 from the contracting officer reflecting adequate facility clearance. Offerors may elect to quote and perform without access to the classified drawing/ballistic coupon testing specification. An offeror must specify with its quote whether it requires access. If an offeror quotes without seeking access to the classified drawing, it must indicate with its quote why it does not require access (e.g., if it is waived for the fat and ballistic coupon testing) and provide adequate supporting documentation. Failure to indicate whether access is required and/or provide supporting documentation (if access is not required) may result in rejection of the offer. If the government determines that the contractor does not require access to the classified drawing/ballistic coupon testing specification to perform, award may be issued without the DD 254 requirement or corresponding clause(s) (e.g., far 52.204-2). If a contractor that did not request/receive access to the classified drawing fails the ballistic coupon testing, the only information to be provided to the contractor regarding its testing is notification of failure (i.e., no explanation of the failure will be provided).

CONTRACT TIMELINE:

120 DAYS AFTER AWARD - DELIVERY OF CONTRACTOR FIRST ARTICLE TEST (CFAT) REPORT

030 DAYS AFTER RECEIPT OF REPORT - GOVERNMENT REVIEW/APPROVAL

162 DAYS AFTER APPROVAL - DELIVERY OF PRODUCTION QUANTITY

312 DAYS TOTAL

IF WAIVED OF CFAT REQUIREMENTS, EXPECTED DELIVERY IS 162 DAYS

10 ARTICLES FOR TEST. THOSE ITEMS WHICH ARE NOT DESTROYED IN TESTING AND WHICH MEET REQUIRED SPECIFICATIONS MAY SHIP

AS PART OF THE PRODUCTION QUANTITY

“UCF SECTION M EVALUATION FACTORS FOR AWARD

Award will be made to the offeror(s) whose quote(s) conforms to the solicitation requirements and represents the best value to the Government. Past performance, offered delivery and price will be evaluated when making a comparative assessment of quotes. An award may be made to other than the lowest priced, technically acceptable, responsible offeror(s).

(End of Text)”

This solicitation is being issued under the First Destination Transportation (FDT) program. If this acquisition is for Foreign Military Sales (FMS) or has an APO/FPO ship to address, FDT not apply and normal procedures should be followed. For FDT program transportation requirements, see DLAD clauses 52.247-9059 FOB Origin, Government Arranged Transportation and 52.247-9058, First Destination Transportation (FDT) Program – Shipments Originating Outside the contiguous United States (OCONUS).

Additional information about FDT can be found on the FDT website (http://www.dla.mil/FDTPI/).

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: 2510-01-253-3907

ITEM DESCRIPTION:

DOOR,VEHICULAR

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITYREQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITYREQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ002: CONFIGURATIONCHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ001: HIGHER LEVEL CONTRACT QUALITYREQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RT001: MEASURING AND TESTEQUIPMENT

A CLASSIFIED DRAWING FORMS A PART OF THIS

DATA PACKAGE AND WILL BE SUPPLIED UPON

AWARD FOLLOWING RECEIPT OF

COMPLETEDDD FORM 254 FROM

THE CONTRACTING OFFICER.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROLREGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCPCERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TOINTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORMIS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BYWRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURETHIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCEAGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THEOFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

GENERAL APPLICABILITY, AND/OR EAR PART 740 AREAPPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICERWITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICALDATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHERDISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

A CLASSIFIEDDOCUMENT IS INCLUDED IN THE

TECHNICAL DATA PACKAGE THAT SUPPORTS THIS

MATERIAL. CONTRACT AWARD FOR THIS ITEM IS

LIMITED TO THOSECONTRACTORS THAT HAVE A

VALID AND CURRENT SECURITY CLASSIFICATION

LEVEL OF "SECRET" PRIOR TO AWARD. UPON AWARD

OF THE CONTRACT, THECONTRACTING OFFICER WILL

ARRANGE FOR THE SECURE DISTRIBUTION OF THIS

CLASSIFIED DOCUMENT THROUGH THE DATA DISTRIBU-

TION OFFICE,DSCC-VTRD, COLUMBUS, OHIO.

EXCEPTION TO DWG 12339371 WINDOW FRAME LATCH:

,,- MS16633-1050 may be used ILO Retaining Ring24617-9421557 (J-55.951)

A CLASSIFIED DOCUMENT IS INCLUDED IN THE

TECHNICAL DATA PACKAGE THAT SUPPORTS THIS

MATERIAL. CONTRACTAWARD FOR THIS ITEM IS

LIMITED TO THOSE CONTRACTORS THAT HAVE A

VALID AND CURRENT SECURITY CLASSIFICATION

LEVEL OF "SECRET" PRIOR TO AWARD. UPON AWARD

OF THE CONTRACT, THE CONTRACTING OFFICER WILL

ARRANGE FOR THE SECURE DISTRIBUTION OF THIS

CLASSIFIED DOCUMENTTHROUGH THE DATA DISTRIBU-

TION OFFICE, DSCC-VTRD, COLUMBUS, OHIO.

1. FIRST ARTICLE APPROVAL-CONTRACTOR TESTING: First ArticleApproval- Contractor testing shall be performed in accordance with drawings 12339369, 12339448, 12339472, 12339898 and QAPS12339369, 12339472, 12339898.

PN,,,,,,Nomenclature,,,,,,,,FAT Samples 12339369,,Spring, Window Latch,,,,2 12339448,,Hinge,Door,,,,,,,,,,2 12339472,,Panel, Front Door,,,,,,2 and 2 Coupons 12339898,,Window, Side, Supplemental ,,4

Below components/QTYshall be destroyed in testing:

12339448,,Hinge, Door,,,,,,,,,,2 12339472,,Panel, Front Door,,,,,,2 Coupons 12339898,,Window,Side,Supplemental ,,4

2. Ballistic testing is required; however it is the responsibility of the contractor.

3. The FirstArticle Test Report (FATR) shall be compiled by the contractor in the contractor's own format. The FATR shall document the resultsof all inspections and tests (including supplier and vendor inspection records and certifications, when applicable). The FATRshall include actual inspections and test results to include all measurements, recorded test data, and certifications (asapplicable) keyed to each drawing, specification, SQAP, QAR, QAP requirement and identified as such. The FATR shall containsufficient narrative content, technical data, illustrations or photographic evidence, and an objective determination by thecontractor to allow the designated Government representative to determine that the First Article Test wassuccessfully completed

Copies of classified drawing ATDP 2099, Annex 2. Shall be obtained through DLA viaDSCC-VT-Class@DLA.mil.

Important note: this item requires ballistic testing

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

as instructed per drawing 12339472 And ATPD2099 Annex2. FAT parts and coupons may be used for multiple tests if not destroyed in testing. Contractor must evaluate the number of partsand coupons required to perform fat.

Send test pieces to the address listed below for ballistic testing. FOR

QUESTIONS ABOUTTESTING, CONTACT THE

Survivability Armor Ballistic Lab (SABL) email:

USARMY.Detroit.Arsenal.RDECOM.Mbx.SABL@mail.mil<(>,<)> Phone(586) 282-5725

BALLISTIC TESTING LOCATION:

Ballistic Testing Facility shall be:

US Army TARDEC Survivability Armor BallisticLab(SABL) RDTA-RTI-GSS-SABL 6501 E 11 Mile Rd.

Warren, MI 48397-5000

(586) 282-5725

The test, inspection and report must bewitness/ reviewed by a government representative prior to submission to DLA PCO.

The ballistic test results must be maintained bymanufacturer.

Contractor requesting for waiver shall provide the following:

1) DLAD clause, 52.209-9019 request for waiver of First article testing requirements. Verify compliance with a1, a2, a3, a4, a5 of the clause.

2) *Provide a copy of the last ballistictest results only<(>,<)> And how many units were produced after the ballistic test.

* Documentation provided must be handled inaccordance to Security classification guide for combat support and combat Service support armoring systems. Send ONLY theaccepted/ Rejection letter.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12339469

REVISION NR H DTD 05/31/2013

PARTPIECE NUMBER: 12339469-2

IAW REFERENCE DRAWING NR 19207 12339471

REVISION NR D DTD 06/04/2012

PART PIECE NUMBER:

IAW REFERENCEDRAWING NR 19207 12339381

REVISION NR B DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339423

REVISION NR D DTD 05/08/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339442

REVISION NR D DTD 05/08/2015

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339443

REVISION NR C DTD 05/08/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339447

REVISION NR B DTD 05/25/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339454

REVISION NR C DTD06/21/2012

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339053

REVISION NR B DTD 10/21/2009

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339378

REVISION NR B DTD 05/30/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339364

REVISION NR D DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339366

REVISION NR B DTD06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339368

REVISION NR C DTD 06/21/2012

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339369

REVISION NR C DTD 03/18/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339370

REVISION NR B DTD 03/13/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339371

REVISION NR B DTD06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339373

REVISION NR H DTD 02/05/2013

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339375

REVISION NR D DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339388

REVISION NR B DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339390

REVISION NR B DTD05/08/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339452

REVISION NR B DTD 06/21/2012

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339463

REVISION NR C DTD 05/24/2012

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12339472

REVISION NRC DTD 07/06/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339725

REVISION NR C DTD 03/12/2009

PART PIECENUMBER:

IAW REFERENCE DRAWING NR 19207 12339726

REVISION NR C DTD 03/12/2009

PART PIECE NUMBER:

IAW REFERENCE QAP 1920712339898

REVISION NR E DTD 06/08/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342673

REVISION NR A DTD01/30/2009

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 36 PAGES

CONTINUED ON NEXT PAGE

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

IAW REFERENCE DRAWING NR 19207 12339448

REVISION NR D DTD 05/24/2012

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339453

REVISION NR B DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339730

REVISION NR C DTD 06/04/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12340257

REVISION NR D DTD06/04/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339380

REVISION NR B DTD 05/30/2012

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339404

REVISION NR C DTD 03/18/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339416

REVISION NR D DTD 05/30/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339728

REVISION NR D DTD05/22/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469122

REVISION NR A DTD 01/03/2007

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12469117

REVISION NR B DTD 11/29/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339417

REVISION NR C DTD 05/08/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339729

REVISION NR B DTD05/22/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12480693

REVISION NR A DTD 11/07/2007

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12480715

REVISION NR DTD 08/09/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712469123

REVISION NR B DTD 01/11/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469218

REVISION NR C DTD04/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469113

REVISION NR A DTD 11/29/2006

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339389

REVISION NR B DTD 05/08/2015

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12339448

REVISION NRC DTD 06/08/2012

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

IAW REFERENCE QAP 19207 12339369

REVISION NR B DTD 01/20/2005

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339902

REVISION NR L DTD 03/25/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712340040

REVISION NR D DTD 06/04/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339898

REVISION NR H DTD05/22/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339727

REVISION NR C DTD 05/24/2012

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339731

REVISION NR E DTD 03/17/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339418

REVISION NR A DTD 03/18/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339445

REVISION NR D DTD05/30/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339446

REVISION NR B DTD 03/12/2009

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339450

REVISION NR B DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712339472

REVISION NR D DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339391

REVISION NR E DTD07/17/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339467

REVISION NR C DTD 06/04/2012

PART PIECE NUMBER:

IAWREFERENCE DRAWING NR 19207 12339482

REVISION NR E DTD 06/21/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 1920712469218

REVISION NR B DTD 11/18/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339355

REVISION NR H DTD09/26/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12339469-2

REVISION NR DTD 06/02/2014

PART PIECE NUMBER:12339469-2

IAW REFERENCE DRAWING NR 19207 ATPD-2099-ANNEX-2

REVISION NR DTD 07/16/2012

PART PIECE NUMBER:

IAW REFERENCEDRAWING NR 19207 ATPD-2099E

REVISION NR E DTD 01/21/2009

IAW REFERENCE DRAWING NR 19200ABRIDGE-SCG-CSCSS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

REVISION NR DTD 08/31/2012

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 2510-01-253-3907 40.000 AY $ ________________ $ ________________

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 312 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNNTHKNESS:Z

UNIT CONT:F2 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ SpecialRequirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

ATTENTION: PACKAGE DESIGN SHALLADHERE TO

CONTRACTUAL QUP AND UNIT OF ISSUE. SHIPMENTS SHALL

ARRIVE IN SERVICEABLE CONDITION & READY-FOR-ISSUE

WITHOUT ANYADDITIONAL PACKAGING AND/OR MARKING.

GLASS WINDOW:

WRAP MAT=ZZ: WINDOW GLASS SHALL HAVE A FILM

ADHERING/COVERING IT TO PROTECT ITFROM SCRATCHES.

ADHERING FILM SHALL BE EASILY REMOVED BEFORE/AFTER

INSTALLATION.

CUSH/DUUN MAT=ZZ: CUSHIONING AND DUNNAGEMATERIAL

SHALL BE EITHER FOAM-IN-PLACE OR ANY CUSHIONING

MATERIAL WHICH WILL ADEQUATELY PROTECT & BLOCK

AND BRACE THE WINDOW FROMANY BREAKAGE, DAMAGE<(>,<)>

SCRATCHES, OR RESIDUE DURING THE DISTRIBUTION

SYSTEM TO THE ULTIMATE USER.

CUSHIONING MATERIALTHICKNESS = Z - THICKNESS IS

DEPENDENT ON STATIC STRESS AND DENSITY OF

CUSHIONING MATERIAL SELECTED. RECOMMEND USING

CUSHIONINGCURVES TO IMPROVE PACKAGE DESIGN.

DOOR:

BLOCKING AND BRACING. ITEMS WHICH DO NOT COMPLETELY

FILL THE SHIPPING CONTAINER SHALL BEBLOCKED, BRACED<(>,<)>

ANCHORED, OR OTHERWISE IMMOBILIZED WITHIN THE CONTAINER.

THE PACKAGE CUSHOINING IS DESIGNED TO PROTECTAGAINST

SHOCK AND VIBRATION DURING SHIPMENT. THE MATERIAL

SELECTED FOR BLOCKING AND BRACING AND THE DESIGN AND

APPLICATION OF THEBLOCKING AND BRACING SHALL BE

COMPATIBLE WITH THE LOAD TO BE SUPPORTED AND THE SIZE<(>,<)>

SHAPE, AND STRENGTH OF BEARING AREAS OFTHE ITEM.

WRAPPING MATERIAL (CODE: CA) FOR:

Surface abrasion and corrosion. When the surface of the item in contact with theblocking and bracing can be damaged by relative motion between the contacting surfaces or could become corroded as a result of suchcontact, the contacting surfaces shall be separated by a barrier material meeting protective surface corrosion requirements forwrapping, cushioning and dunnage materials

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

shall be used in contact with unprotected surfaces susceptible to damage from corrosionor deterioration.

CUSHIONING/DUNNAGE MATERIAL (CODE: AD) FOR:

Other rigid, low-density materials. Other rigid<(>,<)> low-densitymaterials, such as solid fiberboard conforming to ASTM-D4727 and MIL-F-26862, and rigid foam or cellular plastics conformingto MIL-P-19644, MIL-P-24249 or MIL-P-21929, cut<(>,<)> foamed in place, molded, or otherwise formed as required, may be used forappropriate blocking and bracing applications.

Wood. Wood used for blocking and bracing shall conform to ASTM-D6199. Once woodmember of each size and type used in the blocking and bracing shall be tested for moisture content. Structural members [thosesubject to critical bending stresses) shall conform to class 1 of ASTM-D6199. All other blocking and bracing members shall conformto class 3. Whenever possible, wood blocks or braces shall be placed so that the load is applied against the end grain of themember. Ends of braces shall be socketed or fitted and secured into appropriate notches in load-bearing members.

Plywood. Plywoodused for blocking and bracing shall conform to A-A-55057, group A, (grade 3-4<(>,<)> type II) or group B, (C-D, interior withexterior glue).

PACK CODE=Z: CONTRACTOR SHALL ENSURE PACKAGE

DESIGN IS ADEQUATE FOR DOD DELIVERIES PER

ASTM D4169, DISTRIBUTIONCYCLE 18, ASSURANCE

LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE

MILITARY PACKAGING DESIGN VALIDATION

DOCUMENTATION LISTED INMIL-STD-2073-1D<(>,<)>

PARAGRAPH 5.6 AND APPENDIX F.

PACKAGE DESIGN VALIDATION PROVISIONS PER

MIL-STD-2073-1D, PARAGRAPH 5.6 ANDGENERAL

REQUIREMENTS FOR PACKAGE DESIGNS AND PERFORMANCE

PER MIL-STD-2073-1D, PARAGRAPH 5.2.3 (a-j) AS

APPLICABLE TO PRODUCT.PACKAGE DESIGN SHALL

PROMOTE SAFE DELIVERY AS A PERFORMANCE CRITERIA.

HARDWARE: All loose hardware shall be contained within asealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shallbe applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within eachindividual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

ATTENTION:Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceablecondition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel.

SPECIAL MARKINGS SHALL BE IN ACCORDANCE WITH

MIL-STD-129 AND ASTM D5445 (PICTORIAL MARKINGS

FORHANDLING GOODS) TO ENSURE SAFE DELIVERIES.

UNIT OF ISSUE IS AY (ASSEMBLY).

ZZ = ADDITIONAL SPECIAL MARKING REQUIREMENTS:

36 -FRAGILE, ARROW UP, AND GLASS;

OPEN THIS SIDE.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive,Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. SeeMIL-STD-129, paragraph 5.4.1.6 (Protected Cargo) for more information.

A PARTS LIST (WITH PART NAME, PART NUMBER

& QUANTITY)SHALL BE INCLUDED WITHIN EACH KIT.

IF APPLICABLE, ASSEMBLY INSTRUCTIONS SHALL

ALSO BE INCLUDED WITHIN EACH PACKAGE.

If ProductFirst Article Testing (FAT) is required and a Packaging FAT is included in the Special Packaging Instruction or Drawing, thePackaging FAT requirement is invoked. If there is no Product FAT, no Packaging FAT is required.

PARCEL POST ADDRESS:

SW3227

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

TEXARKANA TX 75507-5000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

SW3227

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

TEXARKANA TX 75507-5000

US

0002 2510-01-253-3907 118.000 AY $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 312 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:F2 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

ATTENTION: PACKAGE DESIGN SHALL ADHERE TO

ARRIVE IN SERVICEABLE CONDITION & READY-FOR-ISSUE

WITHOUT ANY ADDITIONAL PACKAGING AND/OR MARKING.

GLASS WINDOW:

WRAP MAT=ZZ: WINDOW GLASS SHALL HAVE A FILM

ADHERING/COVERING IT TO PROTECT IT FROM SCRATCHES.

ADHERING FILM SHALL BE EASILY REMOVED BEFORE/AFTER

INSTALLATION.

CUSH/DUUN MAT=ZZ: CUSHIONING AND DUNNAGE MATERIAL

SHALL BE EITHER FOAM-IN-PLACE OR ANY CUSHIONING

MATERIAL WHICH WILL ADEQUATELY PROTECT & BLOCK

AND BRACE THE WINDOW FROM ANY BREAKAGE, DAMAGE<(>,<)>

SCRATCHES, OR RESIDUE DURING THE DISTRIBUTION

SYSTEM TO THE ULTIMATE USER.

CUSHIONING MATERIAL THICKNESS = Z - THICKNESS IS

DEPENDENT ON STATIC STRESS AND DENSITY OF

CUSHIONING MATERIAL SELECTED. RECOMMEND USING

CUSHIONING CURVES TO IMPROVE PACKAGE DESIGN.

DOOR:

BLOCKING AND BRACING. ITEMS WHICH DO NOT COMPLETELY

FILL THE SHIPPING CONTAINER SHALL BE BLOCKED, BRACED<(>,<)>

ANCHORED, OR OTHERWISE IMMOBILIZED WITHIN THE CONTAINER.

THE PACKAGE CUSHOINING IS DESIGNED TO PROTECT AGAINST

SHOCK AND VIBRATION DURING SHIPMENT. THE MATERIAL

SELECTED FOR BLOCKING AND BRACING AND THE DESIGN AND

APPLICATION OF THE BLOCKING AND BRACING SHALL BE

COMPATIBLE WITH THE LOAD TO BE SUPPORTED AND THE SIZE<(>,<)>

SHAPE, AND STRENGTH OF BEARING AREAS OF THE ITEM.

WRAPPING MATERIAL (CODE: CA) FOR:

Surface abrasion and corrosion. When the surface of the item in contact with the blocking and bracing can be damaged by relative motion between the contacting surfaces or could become corroded as a result of such contact, the contacting surfaces shall be separated by a barrier material meeting protective surface corrosion requirements for wrapping, cushioning and dunnage materials shall be used in contact with unprotected surfaces susceptible to damage from corrosion or deterioration.

CUSHIONING/DUNNAGE MATERIAL (CODE: AD) FOR:

Other rigid, low-density materials. Other rigid<(>,<)> low-density materials, such as solid fiberboard conforming to ASTM-D4727 and MIL-F-26862, and rigid foam or cellular plastics conforming to MIL-P-19644, MIL-P-24249 or MIL-P-21929, cut<(>,<)> foamed in place, molded, or otherwise formed as required, may be used for appropriate blocking and bracing applications.

Wood. Wood used for blocking and bracing shall conform to ASTM-D6199. Once wood member of each size and type used in the blocking and bracing shall be tested for moisture content. Structural members [those subject to critical bending stresses) shall conform to class 1 of ASTM-D6199. All other blocking and bracing members shall conform to class 3. Whenever possible, wood blocks or braces shall be placed so that the load is applied against the end grain of the member. Ends of braces shall be socketed or fitted and secured into appropriate notches in load-bearing members.

Plywood. Plywood used for blocking and bracing shall conform to A-A-55057, group A, (grade 3-4<(>,<)> type II) or group B, (C-D, interior with exterior

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE

LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE

MILITARY PACKAGING DESIGN VALIDATION

DOCUMENTATION LISTED IN MIL-STD-2073-1D<(>,<)>

PARAGRAPH 5.6 AND APPENDIX F.

PACKAGE DESIGN VALIDATION PROVISIONS PER

MIL-STD-2073-1D, PARAGRAPH 5.6 AND GENERAL

REQUIREMENTS FOR PACKAGE DESIGNS AND PERFORMANCE

PER MIL-STD-2073-1D, PARAGRAPH 5.2.3 (a-j) AS

APPLICABLE TO PRODUCT. PACKAGE DESIGN SHALL

PROMOTE SAFE DELIVERY AS A PERFORMANCE CRITERIA.

HARDWARE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

ATTENTION: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel.

SPECIAL MARKINGS SHALL BE IN ACCORDANCE WITH

MIL-STD-129 AND ASTM D5445 (PICTORIAL MARKINGS

FOR HANDLING GOODS) TO ENSURE SAFE DELIVERIES.

UNIT OF ISSUE IS AY (ASSEMBLY).

ZZ = ADDITIONAL SPECIAL MARKING REQUIREMENTS:

36 - FRAGILE, ARROW UP, AND GLASS;

OPEN THIS SIDE.

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping containers of protected cargo. See MIL-STD-129, paragraph 5.4.1.6

& QUANTITY) SHALL BE INCLUDED WITHIN EACH KIT.

If Product First Article Testing (FAT) included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

SW3227

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

TEXARKANA TX 75507-5000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

SW3227

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

0003 2510-01-253-3907 200.000 AY $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 312 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:F2 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

ARRIVE IN SERVICEABLE CONDITION & READY-FOR-ISSUE

WITHOUT ANY ADDITIONAL PACKAGING AND/OR MARKING.

GLASS WINDOW:

WRAP MAT=ZZ: WINDOW GLASS SHALL HAVE A FILM

ADHERING/COVERING IT TO PROTECT IT FROM SCRATCHES.

ADHERING FILM SHALL BE EASILY REMOVED BEFORE/AFTER

INSTALLATION.

CUSH/DUUN MAT=ZZ: CUSHIONING AND DUNNAGE MATERIAL

SHALL BE EITHER FOAM-IN-PLACE OR ANY CUSHIONING

MATERIAL WHICH WILL ADEQUATELY PROTECT & BLOCK

AND BRACE THE WINDOW FROM ANY BREAKAGE, DAMAGE<(>,<)>

SCRATCHES, OR RESIDUE DURING THE DISTRIBUTION

SYSTEM TO THE ULTIMATE USER.

CUSHIONING MATERIAL THICKNESS = Z - THICKNESS IS

DEPENDENT ON STATIC STRESS AND DENSITY OF

CUSHIONING MATERIAL SELECTED. RECOMMEND USING

CUSHIONING CURVES TO IMPROVE PACKAGE DESIGN.

DOOR:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

BLOCKING AND BRACING. ITEMS WHICH DO NOT COMPLETELY

FILL THE SHIPPING CONTAINER SHALL BE BLOCKED, BRACED<(>,<)>

ANCHORED, OR OTHERWISE IMMOBILIZED WITHIN THE CONTAINER.

THE PACKAGE CUSHOINING IS DESIGNED TO PROTECT AGAINST

SHOCK AND VIBRATION DURING SHIPMENT. THE MATERIAL

SELECTED FOR BLOCKING AND BRACING AND THE DESIGN AND

APPLICATION OF THE BLOCKING AND BRACING SHALL BE

COMPATIBLE WITH THE LOAD TO BE SUPPORTED AND THE SIZE<(>,<)>

SHAPE, AND STRENGTH OF BEARING AREAS OF THE ITEM.

WRAPPING MATERIAL (CODE: CA) FOR:

Surface abrasion and corrosion. When the surface of the item in contact with the blocking and bracing can be damaged by relative motion between the contacting surfaces or could become corroded as a result of such contact, the contacting surfaces shall be separated by a barrier material meeting protective surface corrosion requirements for wrapping, cushioning and dunnage materials shall be used in contact with unprotected surfaces susceptible to damage from corrosion or deterioration.

CUSHIONING/DUNNAGE MATERIAL (CODE: AD) FOR:

Other rigid, low-density materials. Other rigid<(>,<)> low-density materials, such as solid fiberboard conforming to ASTM-D4727 and MIL-F-26862, and rigid foam or cellular plastics conforming to MIL-P-19644, MIL-P-24249 or MIL-P-21929, cut<(>,<)> foamed in place, molded, or otherwise formed as required, may be used for appropriate blocking and bracing applications.

Wood. Wood used for blocking and bracing shall conform to ASTM-D6199. Once wood member of each size and type used in the blocking and bracing shall be tested for moisture content. Structural members [those subject to critical bending stresses) shall conform to class 1 of ASTM-D6199. All other blocking and bracing members shall conform to class 3. Whenever possible, wood blocks or braces shall be placed so that the load is applied against the end grain of the member. Ends of braces shall be socketed or fitted and secured into appropriate notches in load-bearing members.

Plywood. Plywood used for blocking and bracing shall conform to A-A-55057, group A, (grade 3-4<(>,<)>

ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE

LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE

MILITARY PACKAGING DESIGN VALIDATION

DOCUMENTATION LISTED IN MIL-STD-2073-1D<(>,<)>

PARAGRAPH 5.6 AND APPENDIX F.

PACKAGE DESIGN VALIDATION PROVISIONS PER

MIL-STD-2073-1D, PARAGRAPH 5.6 AND GENERAL

REQUIREMENTS FOR PACKAGE DESIGNS AND PERFORMANCE

PER MIL-STD-2073-1D, PARAGRAPH 5.2.3 (a-j) AS

APPLICABLE TO PRODUCT. PACKAGE DESIGN SHALL

PROMOTE SAFE DELIVERY AS A PERFORMANCE CRITERIA.

HARDWARE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

ATTENTION: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel.

SPECIAL MARKINGS SHALL BE IN ACCORDANCE WITH

MIL-STD-129 AND ASTM D5445 (PICTORIAL MARKINGS

FOR HANDLING GOODS) TO ENSURE SAFE DELIVERIES.

UNIT OF ISSUE IS AY (ASSEMBLY).

ZZ = ADDITIONAL SPECIAL MARKING REQUIREMENTS:

36 - FRAGILE, ARROW UP, AND GLASS;

OPEN THIS SIDE.

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

TEXARKANA TX 75507-5000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

SW3227

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

0004 2510-01-253-3907 45.000 AY $ ________________ $ ________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 36 PAGES

CONTINUED ON NEXT PAGE

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 312 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:F2 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

ARRIVE IN SERVICEABLE CONDITION & READY-FOR-ISSUE

WITHOUT ANY ADDITIONAL PACKAGING AND/OR MARKING.

GLASS WINDOW:

WRAP MAT=ZZ: WINDOW GLASS SHALL HAVE A FILM

ADHERING/COVERING IT TO PROTECT IT FROM SCRATCHES.

ADHERING FILM SHALL BE EASILY REMOVED BEFORE/AFTER

INSTALLATION.

CUSH/DUUN MAT=ZZ: CUSHIONING AND DUNNAGE MATERIAL

SHALL BE EITHER FOAM-IN-PLACE OR ANY CUSHIONING

MATERIAL WHICH WILL ADEQUATELY PROTECT & BLOCK

AND BRACE THE WINDOW FROM ANY BREAKAGE, DAMAGE<(>,<)>

SCRATCHES, OR RESIDUE DURING THE DISTRIBUTION

SYSTEM TO THE ULTIMATE USER.

CUSHIONING MATERIAL THICKNESS = Z - THICKNESS IS

DEPENDENT ON STATIC STRESS AND DENSITY OF

CUSHIONING MATERIAL SELECTED. RECOMMEND USING

CUSHIONING CURVES TO IMPROVE PACKAGE DESIGN.

DOOR:

BLOCKING AND BRACING. ITEMS WHICH DO NOT COMPLETELY

FILL THE SHIPPING CONTAINER SHALL BE BLOCKED, BRACED<(>,<)>

ANCHORED, OR OTHERWISE IMMOBILIZED WITHIN THE CONTAINER.

THE PACKAGE CUSHOINING IS DESIGNED TO PROTECT AGAINST

SHOCK AND VIBRATION DURING SHIPMENT. THE MATERIAL

SELECTED FOR BLOCKING AND BRACING AND THE DESIGN AND

APPLICATION OF THE BLOCKING AND BRACING SHALL BE

COMPATIBLE WITH THE LOAD TO BE SUPPORTED AND THE SIZE<(>,<)>

SHAPE, AND STRENGTH OF BEARING AREAS OF THE ITEM.

WRAPPING MATERIAL (CODE: CA) FOR:

Surface abrasion and corrosion. When the surface of the item in contact with the blocking and bracing can be damaged by relative motion between the contacting surfaces or could become corroded as a result of such contact, the contacting surfaces shall be separated by a barrier material meeting protective surface corrosion requirements for wrapping, cushioning and dunnage materials shall be used in contact with unprotected surfaces susceptible to damage from corrosion or deterioration.

CUSHIONING/DUNNAGE MATERIAL (CODE: AD) FOR:

Other rigid, low-density materials. Other rigid<(>,<)> low-density materials, such as solid fiberboard conforming to ASTM-D4727 and MIL-F-26862, and rigid foam or cellular plastics conforming to MIL-P-19644, MIL-P-24249 or MIL-P-21929, cut<(>,<)>

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 36 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-253-3907 CONT'D

foamed in place, molded, or otherwise formed as required, may be used for appropriate blocking and bracing applications.

Wood. Wood used for blocking and bracing shall conform to ASTM-D6199. Once wood member of each size and type used in the blocking and bracing shall be tested for moisture content. Structural members [those subject to critical bending stresses) shall conform to class 1 of ASTM-D6199. All other blocking and bracing members shall conform to class 3. Whenever possible, wood blocks or braces shall be placed so that the load is applied against the end grain of the member. Ends of braces shall be socketed or fitted and secured into appropriate notches in load-bearing members.

Plywood. Plywood used for blocking and bracing shall conform to A-A-55057, group A, (grade 3-4<(>,<)>

ASTM D4169, DISTRIBUTION CYCLE 18, ASSURANCE

LEVEL II, ACCEPTANCE CRITERIA 3 -OR- PROVIDE

MILITARY PACKAGING DESIGN VALIDATION

DOCUMENTATION LISTED IN MIL-STD-2073-1D<(>,<)>

PARAGRAPH 5.6 AND APPENDIX F.

PACKAGE DESIGN VALIDATION PROVISIONS PER

MIL-STD-2073-1D, PARAGRAPH 5.6 AND GENERAL

REQUIREMENTS FOR PACKAGE DESIGNS AND PERFORMANCE

PER MIL-STD-2073-1D, PARAGRAPH 5.2.3 (a-j) AS

APPLICABLE TO PRODUCT. PACKAGE DESIGN SHALL

PROMOTE SAFE DELIVERY AS A PERFORMANCE CRITERIA.

HARDWARE: All loose hardware shall be contained within a sealed container (bag/box) and the highest applicable preservation method (based on physical characteristics of items) shall be applied to ensure items will not be damaged or experience corrosion. In addition, packaged hardware shall be placed within each individual unit container to ensure items do not damage (dent, scratch, nick, etc.) the part or any components therein.

ATTENTION: Hardware for shipments cannot be shipped in bulk. It is not an acceptable practice.

Material must arrive in serviceable condition and meet the contractual quantity unit pack requirements. Thus, requiring no additional sorting, packaging, and/or marking by user or depot personnel.

SPECIAL MARKINGS SHALL BE IN ACCORDANCE WITH

MIL-STD-129 AND ASTM D5445 (PICTORIAL MARKINGS

FOR HANDLING GOODS) TO ENSURE SAFE DELIVERIES.

UNIT OF ISSUE IS AY (ASSEMBLY).

ZZ = ADDITIONAL SPECIAL MARKING REQUIREMENTS:

36 - FRAGILE, ARROW UP, AND GLASS;

OPEN THIS SIDE.

ZZ -ADDITIONAL SPECIAL MARKING:

Protected Cargo (Controlled, Sensitive, Classified, Pilferable items).

Special Marking Code 40 applies -- "Markings shall be omitted for sensitive, controlled or pilferable items per MIL-STD-129."

The item description (nomenclature) shall be omitted from all shipping

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 36 PAGES

CONTINUED ON NEXT PAGE

included in the Special Packaging Instruction or Drawing, the Packaging FAT requirement is invoked. If there

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

TEXARKANA TX 75507-5000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

SW3227

DLA DISTRIBUTION RED RIVER

RECEIVING BLDG 499

10TH STREET AND K AVENUE

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

0005 0001 - S00000053 1.000 EA $ ________________ $ ________________

FOB: DELIVERY DATE: 120 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0073231554 0001 N/A N/A N/A 11/22/2018

0002 0074277617 0001 N/A N/A N/A 01/24/2019

0003 0074807174 0001 N/A N/A N/A 04/09/2019

0004 0073805732 0001 N/A N/A N/A 12/26/2018

0005 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 36 PAGES

CONTINUED ON NEXT PAGE

SUPPLY/SERVICE: 0001-S00000053 CONT'D

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 36 PAGES

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE

MATERIALS OR COMPONENTS (DEC 2016)

SECTION D - PACKAGING AND MARKING

252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (JUN 2016) DFARS

As prescribed in 211.275-3, use the following clause:

(a) Definitions. As used in this clause --

“Advance shipment notice” means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

“Bulk commodities” means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

“Case” means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

“Electronic Product Code™ (EPC)” means an identification scheme for universally identifying physical objects via RFID tags and other means.

The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user-defined data. The EPC Tag Data Standards will define the length and position of this data, without defining its content.

“EPCglobal®” means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

“Exterior container” means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and file:///C:/Users/RJ30041/AppData/Local/Temp/&#xD;Temp2_dfars_html%20(1).zip/dfars_html/211_2.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 36 PAGES

SECTION D - PACKAGING AND MARKING (CONTINUED)

CONTINUED ON NEXT PAGE

construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

“Palletized unit load” means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

“Passive RFID tag” means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags that meet the EPCglobal™ Class 1 Generation 2 standard.

“Radio frequency identification (RFID)” means an automatic identification and data capture technology comprising one or more reader/ interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

“Shipping container” means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that --

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I - Packaged operational rations.

(B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP - Packaged petroleum,…