SPE7L318Q0682.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE7L3-18-Q-0682

2. DATE ISSUED

2018 MAY 15

3. REQUISITION/PURCHASE REQUEST NO.

0071199486

RATING

DO-C9

DLA LAND AND MARITIME

LAND SUPPLIER OPNS VEHICLE SPT

PO BOX 3990

COLUMBUS OH 43218-3990

USA

Buyer: David Samaroo PLCLBC2 Tel: 614-692-6215 Fax: 614-693-1620 Email: David.Samaroo@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 MAY 29

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 25 PAGES

SPE7L3-18-Q-0682

CONTINUED ON NEXT PAGE

THIS SOLICITATION IS BEING ISSUED UNDER SPECIAL EMERGENCY PROCUREMENT AUTHORITY (SEPA). REQUIREMENT MAY BE AWARDED

PRIOR TO SOLICITATION RETURN DATE.

This solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/. Due to system constraints, it may take as long as three business days from the stated issue date for the solicitation to post to DIBBS.

OFFER SUBMISSION INSTRUCTIONS: ALL OFFERORS MUST SUBMIT THIER QUOTES THROUGH DIBBS . Once the evaluation process begins, late quotations will only be considered if the contracting officer determines that considering the late quotation is in the best interest of the Government and would not unduly delay the award.

THE FOLLOWING CLAUSES ALSO APPLY:

FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions

FAR 52.203-12 Limitation on Payments to Influence Certain Federal Transactions

DFARS 252.209-7004 Subcontracting with Firms that are owned or controlled by the government of a Terrorist country

FAR 52.222-35, Equal Opportunity for Veterans

FAR 52.222-37, Employment Reports on Veterans

FAR 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items, in solicitations and contracts exceeding $150,000 that are for, or specify the use of, EPA-designated products containing recovered materials. (Except for the acquisition of commercially available off-the-shelf items)

DFARS 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism

DFARS 252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A TERRORIST COUNTRY.

STO 209-9017 ALT 1

STO 215-9C10

DLAD PROCUREMENT NOTES

DLAD Procurement Notes are incorporated by reference, with the same force and effect as if they were in full text. The full text of a DLAD Procurement Note may be accessed electronically at http://www.dla.mil/HQ/Acquisition/Offers/ eProcurement.aspx and via 'References' on the DIBBS homepage.

FDT

This solicitation is issued under the First Destination Transportation (FDT) program to reduce the cost of transportation through the use of Government-arranged transportation utilizing Government contracts and rates. If this award is for FMS or has an APO/FPO ship-to address, these instructions do not apply.

For FDT Program Transportation Requirements, see Procurement Note C16 First Destination Transportation (FDT) Program, Government-Arranged Transportation for Manual Awards, C17 First Destination Transportation (FDT) Program – Shipments Originating from Outside the Contiguous United States, and Procurement Note C20 – Vendor Shipment Module (VSM).

Offers should be submitted based on FOB origin. For offerors whose shipments will originate from outside the contiguous United States, the offeror’s f.o.b. origin price shall include transportation to a contiguous United States location that the offeror selects based on cost-effectiveness or other variables at the offeror’s discretion.

Additional information about FDT can be found at http://www.dla.mil/LandandMaritime/Business/Selling/DLA-Land-and- Maritime-Procurement-Initiatives/FDTPI/

C16 First Destination Transportation (FDT) Program, Government-Arranged Transportation for Manual Awards (AUG 2017)

(1) Definitions.“Government-arranged transportation” means the Government is responsible for transportation costs, providing the carrier, and scheduling the shipment pickup contingent upon proper contractor notification in VSM (see procurement note C20).

(2) The contractor determines its transportation processes, controls, or costs. The contractor may submit an offer based on f.o.b. destination if it offers a better value to the Government.

(3) The contractor shall:

(a) Use the VSM to notify the Government that the materiel is ready to ship. The Government can take up to two (2) full business days to schedule the shipment. Pick-up should occur within five (5) business days of the contractor’s notification. The contractor shall plan for sufficient time for scheduling the shipment and standard ground transportation for its material to arrive at the destination by the Contract Delivery Date (CDD).

(b) Address the following special accommodations:

(i) If an order specifies carrier equipment when requested by the Government; or

(ii) If an order does not specify carrier equipment, the order appropriate carrier equipment should not be in excess of capacity to accommodate shipment;

(c) Deliver the shipment in good order and condition to the carrier, and load, stow, trim, block, and/or brace carload or truckload shipment (when loaded by the contractor) on or in the carrier’s conveyance as required by carrier rules and regulations

(4) The contractor is responsible for any loss and/or damage to the goods occurring before delivery to the carrier as a result of improper loading, stowing, trimming, blocking, and/or bracing of the shipment if loaded by the contractor on or in the carrier’s conveyance. _______________________________________________________________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: 2510-01-481-7663

ITEM DESCRIPTION:

AIR SPRING, VEHICULAR.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

EXCEPTION: CAGE 26952 ON DRAWING 12421438 SHOULD BE 1K076.

CONTRACTOR FIRST ARTICLE TESTING APPLIES PER

DWG. 12421438, PARA. 13.

THIS NSN REQUIRES GOVERNMENT SOURCE INSPECTION

WITH A FIRST ARTICLE TEST REQUIREMENT. THE

GOVERNMENT SOURCE INSPECTION REQUIREMENT IS

VALID WHETHER OR NOT THE FIRST ARTICLE TEST

REQUIREMENT IS INVOKED.

ATTENTION BUYER, FIRST ARTICLE APPROVAL

AUTHORITY IS DELEGATED TO DCMA. INCLUDE

CLAUSE I09C08 (DELEGATION OF AUTHORITY

FOR FIRST ARTICLE APPROVAL) WITH THE AWARD.

"ANY ITEM PREVIOUSLY TESTED BY A VENDOR

IN ACCORDANCE WITH *** QUALIFICATION***

REQUIREMENTS (FOR EXAMPLE: FAT, HIGH

SHOCK AND/OR VIBRATION TEST), STATED ON

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-481-7663 CONT'D

DWG, SPECIFICATION, OR STANDARD MAY NOT

REQUIRE FURTHER TESTING BY THE SAME VENDOR

EXCEPT FOR A LATER CHANGE IN DESIGN,

MANUFACTURING PROCEDURES, OR TESTING

REQUIREMENTS. A CERTIFICATION OF

CONFORMANCE WITH PREVIOUS TEST RESULTS

ATTESTING APPLICABILITY SHALL BE

SUBMITTED FOR ITEMS PREVIOUSLY TESTED."

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

FULL AND OPEN COMPETITION APPLY

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12421438

REVISION NR C DTD 09/29/2005

PART PIECE NUMBER: 12421438-004

IAW REFERENCE DRAWING NR 19207 12420325

REVISION NR H DTD 10/24/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12421438-004

REVISION NR DTD 11/18/2013

PART PIECE NUMBER:

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 2510-01-481-7663 260.000 EA $ ________________ $ ________________

AIR SPRING

,VEHICULA

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 390 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 2510-01-481-7663 CONT'D

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 0001 - S00000053 1.000 EA $ ________________ $ ________________

PRICING TERMS: Firm Fixed Price

FOB: DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0071199486 0001 N/A N/A N/A 12/06/2018

0002 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C04 UNUSED FORMER GOVERNMENT SURPLUS PROPERTY (DEC 2016)

To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ]

The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No [ ] The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown [ ] If No, the revision does not affect form, fit, function, or interface. Yes[ ] No [ ] Unknown [ ] The material was manufactured by:

(Name):

(Address):

(2) The offeror currently possesses the material Yes [ ] No [ ]

If yes, the offeror purchased the material from a Government selling agency or other source.

Yes [ ] No [ ] If yes, provide the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source:

Address:

Date Acquired: (Month/Year)

(3) The material has been altered or modified. Yes [ ] No [ ]

If Yes, the offeror must provide the name of the company that performed the alteration or modification and attach or forward to the contracting officer a complete description of the alterations or modifications.

(4) The material has been reconditioned. Yes [ ] No [ ]

If Yes, (i) the price offered includes the cost of reconditioning /refurbishment. Yes [ ] No [ ] ; and (ii) the offeror must provide information on the company that reconditioned the material with the certifications and attach or forward to the contracting officer a complete description of any work done or to be done, including the components to be replaced and the applicable rebuild standard. The material contains cure-dated components. Yes [ ] No [ ]

If Yes, (i) the price includes replacement of cure-dated components. Yes [ ] No [ ] ; and (ii) provide cure date to the contracting officer.

5) The material has data plates attached. Yes [ ] No [ ]

If Yes, the offeror must state below all information contained thereon, or forward a copy or facsimile of the data plate to the contracting officer.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 25 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

(6) The offered material is in its original package. Yes [ ] No [ ]

If Yes, the offeror has stated below all original markings and data cited on the package; or has attached or forwarded to the contracting officer a copy or facsimile of original package markings:

Contract Number

NSN

CAGE Code

Part Number

Other Markings/Data

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes [ ] No [ ]

If Yes, (i) the material being offered is from the same original Government contract number as that provided previously. Yes [ ] No [ ] ; and

(ii) state below the Government Agency and contract number under which the material was previously provided:

Agency

Contract Number

(8) The material is manufactured in accordance with a specification or drawing. Yes [ ] No [ ]

If Yes, (i) the specification/drawing is in the possession of the offeror. Yes [ ] No [ ] ; and (ii) the offeror has stated the applicable information below, or forwarded a copy or facsimile to the contracting officer. Yes [ ] No [ ]

Specification/Drawing Number

Revision (if any)

Date

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes [ ] No [ ]

If Yes, (i) material has been re-preserved. Yes [ ] No [ ] ; (ii) material has been repackaged. Yes [ ] No [ ] ; (iii) percentage of material that has been inspected is %; and/or (iv) number of items inspected is ; and (v) a written report was prepared. Yes [ ] No [ ] ; and if Yes, the offeror has attached the written report or forwarded it to the contracting officer. Yes[ ] No[ ]

The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror has attached or forwarded to the contracting officer one of the following, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

[ ] For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

[ ] For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

[ ] When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number.

(This information has already been provided in paragraph (c)(6) of this clause. Yes [ ] No [ ] .)

[ ] When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe and/or attach.

This only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 25 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

L08 USE OF PAST PERFORMANCE INFORMATION RETRIEVAL SYSTEM - STATISTICAL REPORTING IN PAST PERFORMANCE

EVALUATION (OCT 2016)

C02 MANUFACTURING PHASE OUT OR DISCONTINUATION OF PRODUCTION, DIMINISHING SOURCES, AND OBSOLETE

MATERIALS OR COMPONENTS (DEC 2016)

C14 REPACKAGING OR RELABELING TO CORRECT DEFICIENCIES (AUG 2017)

C20 VENDOR SHIPMENT MODULE (VSM) (AUG 2017)

52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE USE, EMERGENCY PREPAREDNESS, AND ENERGY USE

PROGRAM (APR 2008) FAR

As prescribed in 11.604(a), insert the following provision:

Any contract awarded as a result of this solicitation will be [ ] DX rated order; [ ] DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. [Contracting Officer check appropriate box.]

(End of provision)

C17 FIRST DESTINATION TRANSPORTATION (FDT) PROGRAM – SHIPMENTS ORIGINATING FROM OUTSIDE THE CONTIGUOUS

UNITED STATES (AUG 2017)

SECTION E - INSPECTION AND ACCEPTANCE

E01 SUPPLEMENTAL FIRST ARTICLE EXHIBIT DISPOSITION – CONTRACTOR MAINTAINED (SEP 2016)

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR

https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2011_6.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 25 PAGES

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

CONTINUED ON NEXT PAGE

As prescribed in 46.311, insert the following clause:

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

Title Number Date Tailoring See Schedule

[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.

(End of Clause)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008) DFARS

E05 PRODUCT VERIFICATION TESTING (SEP 2016)

(1) When PVT is invoked, the QAR will notify the contractor that testing will be performed. The product verification testing (PVT) will be performed at a Government-designated testing laboratory.

(a) The contractor shall not ship or deliver any material unless directed to do so in writing by the contracting officer or until notified of acceptable PVT results.

(b) PVT results will be provided in 20 working days after receipt at the Government testing facility.

(2) The QAR will select a random sample from the contractor's production lot. Selected PVT samples are to be shipped by the contractor at Government expense with a copy of the Department of Defense DD

Form 250 and a DD Form 1222. The packaging will be marked “Product Verification Test Samples, Contract Number Lot/Item Number ."

(3) Test results will indicate one of the following:

(a) Samples that pass testing and are not destroyed during evaluation will be returned to the contractor at the Government's expense and will be included as part of the total contract quantity. The contractor and Government may agree to dispose of samples not destroyed when the cost of the item does not justify the shipping expense. These samples will be considered part of the contract quantity. Samples that pass testing and are not returned to the contractor will be considered part of the contract quantity for payment and delivery. The contractor will deliver the remaining lot quantity minus sample units.

(b) If samples fail testing, such failure will result in rejection of the entire contract lot from which the samples were taken. At the Government's discretion, parts failing any test criteria may be retained and not be returned to the contractor.

E06 INSPECTION AND ACCEPTANCE AT ORIGIN (SEP 2016)

The contractor shall indicate the location where supplies will be inspected:

Commercial and Government Entity (CAGE) code:

Address:

Applicable to contract line-item numbers(s) (CLIN(s)):

The contractor shall indicate the location where packaging will be inspected:

[ ] Same as for supplies OR http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/46.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 25 PAGES

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

CONTINUED ON NEXT PAGE

CAGE code:

Address:

Applicable to CLIN(s):

SECTION F - DELIVERIES OR PERFORMANCE

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H02 COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED MANUFACTURERS LIST (QML) (SEP 2016)

H03 SUPPLEMENTAL FIRST ARTICLE TESTING REQUIREMENTS (SEP 2016)

252.223-7001 HAZARD WARNING LABELS (DEC 1991) DFARS

(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.

MATERIAL (If None, Insert “None”)

ACT

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (OCT 2016) DFARS

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS

252.203-7995 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS (NOV 2016) DFARS

52.204-10 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS (OCT 2016) FAR

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016) FAR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

52.204-14 SERVICE CONTRACT REPORTING REQUIREMENTS (OCT 2016) FAR

52.204-15 SERVICE CONTRACT REPORTING REQUIREMENTS FOR INDEFINITE-DELIVERY CONTRACTS (OCT 2016) FAR

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016) FAR

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR

52.204-20 PREDECESSOR OF OFFEROR (JUL 2016) FAR

As prescribed in 4.1804(d), insert the following provision:

(a) Definitions. As used in this provision -

“Commercial and Government Entity (CAGE) code” means -

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [ ] is or [ ] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code:

Predecessor legal name:

(Do not use a “doing business as” name)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) FAR

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7004 ALTERNATE A, SYSTEM FOR AWRD MANAGEMENT (FEB 2014) DFARS

Standard Element ZB_204_7009 has no Title

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) DFARS

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION FOR LITIGATION SUPPORT (MAY 2016) DFARS

52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995) FAR

https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%204_18.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

(a) Definition. “Qualification requirement,” as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award.

(b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification.

http://assist.daps.dla.mil/quicksearch/

(c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided.

Offeror's Name: __________________________________

Manufacturer's Name: _____________________________

Source's Name: __________________________________

Item Name: ______________________________________

Service Identification: ______________________________

Test Number: ____________________________________

(to the extent known)

(d) Even though a product or service subject to a qualification requirement is not itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate this contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests.

(e) If an offeror, manufacturer, source, product or service has met the qualification requireme nt but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interest, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification.

(f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award.

(End of clause)

52.209-3 FIRST ARTICLE APPROVAL - CONTRACTOR TESTING (SEP 1989) FAR

As prescribed in 9.308-1(a) and (b), insert the following clause:

[Contracting Officer shall insert details]

(a) The Contractor shall test 1 unit(s) of Lot/Item 2510-01-481-7663 as specified in this contract. At least 10 calendar days before the beginning of first article tests, the Contractor shall notify the Contracting Officer, in writing, of the time and location of the testing so that the

Government may witness the tests.

(b) The Contractor shall submit the first article test report within 90 calendar days from the date of this contract to DLA Land - FLSEB

(two copies) ATTN: FAT Monitor P.O. Box 3990 Columbus, OH 43218-3990 [insert address of the Government activity to receive the report] https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%209_3.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

marked “First Article Test Report: Contract No. , Lot/Item No. ” Within calendar days after the Government receives the test report, the

Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval.

(c) If the first article is disapproved, the Contractor, upon Government request, shall repeat any or all first article tests. After each request for additional tests, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval.

The Contractor shall then conduct the tests and deliver another report to the Government under the terms and conditions and within the time specified by the Government. The Government shall take action on this report within the time specified in paragraph (b) of this subsection. The

Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule, or for any additional costs to the Government related to these tests.

(d) If the Contractor fails to deliver any first article report on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract.

(e) Unless otherwise provided in the contract, and if the approved first article is not consumed or destroyed in testing, the Contractor may deliver the approved first article as part of the contract quantity if it meets all contract requirements for acceptance.

(f) If the Government does not act within the time specified in paragraph (b) or (c) of this subsection, the Contracting Officer shall, upon timely written request from the Contractor, equitably adjust under the changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay.

(g) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government.

(h) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the offeror/contractor and have been accepted by the Government. The offeror/contractor may request a waiver.

52.209-3 FIRST ARTICLE APPROVAL - CONTRACTOR TESTING (SEP 1989), ALT I (JAN 1997) FAR

52.209-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR SUSPENSION (OCT 2015) FAR

52.209-10 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS (NOV 2015) FAR

252.209-7004 SUBCONTRACTING WITH FIRMS THAT ARE OWNED OR CONTROLLED BY THE GOVERNMENT OF A COUNTRY

THAT IS A STATE SPONSOR OF TERRORISM (OCT 2015) DFARS

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) FAR

252.211-7005 SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS (NOV 2005) DFARS As prescribed in 211.273-4, use the following clause:

(a) Definition. “SPI process,” as used in this clause, means a management or manufacturing process that has been accepted previously by the Department of Defense under the Single Process Initiative (SPI) for use in lieu of a specific military or Federal specification or standard at

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

specific facilities. Under SPI, these processes are reviewed and accepted by a Management Council, which includes representatives of the Contractor, the Defense Contract Management Agency, the Defense Contract Audit Agency, and the military departments.

(b) Offerors are encouraged to propose SPI processes in lieu of military or Federal specifications and standards cited in the solicitation. A listing of SPI processes accepted at specific facilities is available via the Internet at http://guidebook.dcma.mil/20/guidebook_process.htm (paragraph 4.2).

(c) An offeror proposing to use an SPI process in lieu of military or Federal specifications or standards cited in the solicitation shall

(1) Identify the specific military or Federal specification or standard for which the SPI process has been accepted;

(2) Identify each facility at which the offeror proposes to use the specific SPI process in lieu of military or Federal specifications or standards cited in the solicitation;

(3) Identify the contract line items, subline items, components, or elements affected by the SPI process; and

(4) If the proposed SPI process has been accepted at the facility at which it is proposed for use, but is not yet listed at the Internet site specified in paragraph (b) of this clause, submit documentation of Department of Defense acceptance of the SPI process.

(d) Absent a determination that an SPI process is not acceptable for this procurement, the Contractor shall use the following SPI processes in lieu of military or Federal specifications or standards:

(Offeror insert information for each SPI process)

SPI Process:

Facility:

Military or Federal Specification or Standard:

Affected Contract Line Item Number, Subline Item Number, Component, or Element:

(e) If a prospective offeror wishes to obtain, prior to the time specified for receipt of offers, verification that an SPI process is an acceptable replacement for military or Federal specifications or standards required by the solicitation, the prospective offeror

(1) May submit the information required by paragraph (d) of this clause to the Contracting Officer prior to submission of an offer; but

(2) Must submit the information to the Contracting Officer at least 10 working days prior to the date specified for receipt of offers.

52.215-8 ORDER OF PRECEDENCE - UNIFORM CONTRACT FORMAT (OCT 1997) FAR

252.215-7013 SUPPLES AND SERVICES PROVIDED BY NONTRADITIONAL DEFENSE CONTRACTORS (JAN 2018) DFARS

52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (NOV 2011) FAR

52.219-28 POST AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013) FAR

As prescribed in 19.309(c), insert the following clause:

(a) Definitions. As used in this clause.

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is “not dominant in its field of operation” when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2019_3.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts.

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code assigned to this contract. The small business size standard corresponding to this NAICS code can be found at http://www.sba.gov/content/table-small-business-size-standards.

(d) The small business size standard for a Contractor providing a product which it does not manufacture itself, for a contract other than a construction or service contract, is 500 employees.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting office in writing within the timeframes specified in paragraph (b) of this clause that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

The Contractor represents that it [ ] is, [ ] is not a small business concern under NAICS Code assigned to contract number .

[Contractor to sign and date and insert authorized signer's name and title].

52.222-19 CHILD LABOR - COOPERATION WITH AUTHORITIES AND REMEDIES (OCT 2016) FAR

52.222-20 CONTRACTS FOR MATERIALS, SUPPLIES, ARTICLES, AND EQUIPMENT EXCEEDING $15,000 (MAY 2014) FAR

52.222-21 PROHIBITION OF SEGREGATED FACILITIES (APR 2015) FAR

52.222-26 EQUAL OPPORTUNITY (SEP 2016) FAR

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES (JUL 2014) FAR

52.222-50 COMBATTING TRAFFICKING IN PERSONS (MAR 2015) FAR

52.223-3 HAZARDOUS MATERIAL IDENTIFICATION AND MATERIAL SAFETY DATA (JAN 1997) FAR

(b) The offeror must list any hazardous material, as defined in paragraph (a) of this clause, to be delivered under this contract. The hazardous material shall be properly identified and include any applicable identification number, such as National Stock Number or Special Item Number.

This information shall also be included on the Material Safety Data Sheet submitted under this contract.

http://www.sba.gov/content/table-small-business-size-standards

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

Material (If none, insert “None”)

Identification No.

52.223-11 OZONE-DEPLETING SUBSTANCES AND HIGH GLOBAL WARNING POTENTIAL HYDROFLUOROCARBONS (JUN 2016)

FAR

As prescribed in 23.804(a)(1), insert the following clause:

Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016)

(a) Definition. As used in this clause -

“Global warming potential” means how much a given mass of a chemical contributes to global warming over a given time period compared to the same mass of…