SPE7L219T0663.PDF
PDF 269 KB Posted
- Attached to
- BODY, CARGO TRAILER Federal contract opportunity
- Solicitation number
- SPE7L219T0663
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
1. REQUEST NO.
SPE7L2-19-T-0663
2. DATE ISSUED
2018 NOV 20
3. REQUISITION/PURCHASE REQUEST NO.
0076680813
RATING
DO-C9
DLA LAND AND MARITIME
LAND SUPPLIER OPNS WHEELED VEHICLES
PO BOX 3990
COLUMBUS OH 43218-3990
USA
Name: Christine Mossman Buyer Code:PLCLDDD Tel: 614-692-7939 Fax: 614-692-1550 Email: christine.mossman@dla.mil
6. DELIVER BY (Date)
128 DAYS ADO
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)
15. Date of Quotation
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2018 NOV 30
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
PAGE OF PAGES
POC INFORMATION:
WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/
ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.
QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil
FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:
https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).
MASTER SOLICITATION
THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED
ACQUISITIONS REVISION 52 (OCTOBER 18, 2018) WHICH CAN BE FOUND ON THE WEB AT:
http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master_Solicitation_Rev52_10OCT2018.pdf?ver=2018-10-18-141855-120
This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:
http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
1 22
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 22 PAGES
SPE7L2-19-T-0663
CONTINUED ON NEXT PAGE
SECTION A
THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED
SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT
CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE
DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.
MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.
FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE
NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336211 SEE http://www.sba.gov/content/table-small-business-size-standards
FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.
DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,
APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.
ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES
THE CONTRACTORS INSPECTION SYSTEM MUST COMPLY WITH ISO 9001:2015 OR
OTHER EQUIVALENT. IF QUOTING ‘OTHER EQUIVALENT’ SPECIFY WHAT ‘OTHER
EQUIVALENT’ STANDARD APPLIES.
Fast Pay does not apply to this solicitation
Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION A
submitted with the offeror's original quotation without further solicitation or discussion.
If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.
DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:
http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx
Contractors shall not provide parts and supplies made using additive manufacturing (AM), unless AM is specifically authorized in the solicitation/contract. See procurement note L31.
Procurement History for NSN/FSC:015218067/2510
CAGE Contract Number Quantity Unit Cost AWD Date
07GC5 SPE7L218V2039 1.000 26534.60000 20180827
05RU8 SPE7L218V1285P00001 4.000 22300.00000 20180430
This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Transportation utilizing Government contracts and rates. If this acquisition is for Foreign Military Sales (FMS) FDT will not apply. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. The VSM site can be found at: https://vsm.distribution.dla.mil
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PR: 0076680813
NSN/MATERIAL:2510015218067
ITEM DESCRIPTION
BODY,CARGO TRAILER
BODY, CARGO TRAILER.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR
SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RT001: MEASURING AND TEST EQUIPMENT
A. Data required by this document will be included in the price of the procured item(s).
B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).
C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.
D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT - Web Based Training Main Menu under "Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer of the material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract. Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years. When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained.
E. No Certificate of Conformance (COC) or alternate release is authorized.
End of Requirement
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"ANY ITEM PREVIOUSLY TESTED BY A VENDOR
IN ACCORDANCE WITH *** QUALIFICATION***
REQUIREMENTS (FOR EXAMPLE: FAT, HIGH
SHOCK AND/OR VIBRATION TEST), STATED ON
DWG, SPECIFICATION, OR STANDARD MAY NOT
REQUIRE FURTHER TESTING BY THE SAME VENDOR
EXCEPT FOR A LATER CHANGE IN DESIGN,
MANUFACTURING PROCEDURES, OR TESTING
REQUIREMENTS. A CERTIFICATION OF
CONFORMANCE WITH PREVIOUS TEST RESULTS
ATTESTING APPLICABILITY SHALL BE
SUBMITTED FOR ITEMS PREVIOUSLY TESTED."
"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM
SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.
TECHNICAL INSPECTION IS REQUIRED. THE
CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL
INFORMATION AVAILABLE TO VERIFY THAT THE ITEM
MEETS ALL TECHNICAL REQUIREMENTS.
COUNT, KIND, AND CONDITION INSPECTIONS ARE
NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER
MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,
QUOTATIONS BY NON-MANUFACTURERS (APR 1984,
DCSC 52.217-9C01). FINAL INSPECTION OF
PACKAGING, IF REQUIRED, MAY BE CONDUCTED
ELSEWHERE."
"THE FOLLOWING GALVANIZING MATERIAL REQUIREMENTS
SHALL TAKE PRECEDENCE OVER NON-GALVANIZED
MATERIAL REQUIREMENTS SPECIFIED ON INDIVIDUAL
COMPONENT DRAWINGS"
1. ALL LOW CARBON STEEL SHEET METAL PARTS WITH
THICKNESS OF 0.0598 OR THINNER, (EXCEPT DRAWING
QUALITY, SEE NOTES 3 AND 4 BELOW), SHALL BE
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
FABRICATED FROM EQUIVALENT GAGE GALVANIZED STEEL
SHEET, COMMERCIAL STEEL, TYPE A, NOT CHEMICALLY
TREATED. COATING DESIGNATION G90,IAW ASTM A653
AND A924.
2. ALL LOW CARBON STEEL SHEET METAL PARTS 0.0599
TO 0.1644 INCHES THICK (EXCEPT DRAWING QUALITY,
SEE NOTE 3 AND 4), SHALL BE FABRICATED FROM
EQUIVALENT GAGE GALVANIZED STEEL SHEET,
COMMERCIAL STEEL, TYPE A OR B, NOT CHEMICALLY
TREATED, COATING DESIGNATION G90, IAW ASTM
A653.
3. ALL PARTS WITH THE MATERIAL SPECIFIED AS
DRAWING QUALITY LOW CARBON STEEL SHEET,.1644
THICK OR THINNER, SHALL BE FABRICATED FROM
EQUIVALENT GAGE GALVANIZED STEEL SHEET, FORMING
STEEL, TYPE A OR B, NOT CHEMICALLY TREATED.
COATING DESIGNATION G90, IAW ASTM A653 AND
A924.
4. ALL PARTS WITH MATERIAL SPECIFIED AS
DRAWING QUALITY, SPECIAL KILLED, LOW CARBON
STEEL SHEET, .1644 THICK OR THINNER, SHALL
BE FABRICATED FROM EQUIVALENT GAGE GALVANIZED
STEEL SHEET, DEEP DRAWING STEEL, NOT CHEMICALLY
TREATED. COATING DESIGNATION G90, IAW ASTM A653.
5. ALL OTHER LOW CARBON STEEL PARTS FABRICATED
FROM SHEET, STRIP, OR PLATE, THICKER THAN .1644
SHALL BE ZINC COATED (HOT DIP GALVANIZED) IAW
ASTM A123 AFTER FORMING.
6. WHEN WELDING IS PERFORMED ON PREVIOUSLY
GALVANIZED MATERIALS, ALL WELDS SHALL BE COATED
AND ALL AREAS WHERE COATING HAS BEEN HEAT
DAMAGED SHALL BE REPAIRED IAW ASTM A780.
7. ALL REQUIRED PAINTING OF GALVANIZED STEEL
COMPONENTS SHALL BE PER DRAWING 12369008.
8. NO HEAT TREATED PARTS SHALL BE HOT DIP
GALVANIZED.
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE-
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil
THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND
ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH
JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF
STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL
AGREEMENTS.
TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL
TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB
ADDRESS:
https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx
OR BY WRITING TO:
DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084
TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF
GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.
NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE
REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT
OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE
EXPORT CONTROLLED TECHNICAL DATA.
NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25.
*NOTICE: SUPPLIERS ARE REQUIRED TO IDENTIFY SUBCONTRACTORS
AT TIME OF QUOTING IF KNOWN. USE OF ANY SUB-CONTRACTOR
SUPPLIER WILL REQUIRE JCP CERTIFICATION APPROVAL.
IAW BASIC DRAWING NR 19207 12423313
REVISION NR DTD 07/07/2003
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442788
REVISION NR A DTD 10/20/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418763
REVISION NR E DTD 08/12/2010
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418611
REVISION NR B DTD 03/01/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418593
REVISION NR D DTD 01/23/2014
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418609
REVISION NR B DTD 07/17/2003
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418630
REVISION NR B DTD 03/01/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418631
REVISION NR B DTD 03/01/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418809
REVISION NR A DTD 08/14/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418704
REVISION NR C DTD 03/01/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418538
REVISION NR C DTD 01/16/2007
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418594
REVISION NR A DTD 01/19/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418595
REVISION NR B DTD 10/20/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418597
REVISION NR C DTD 01/05/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418598
REVISION NR B DTD 01/19/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418599
REVISION NR A DTD 10/20/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418688
REVISION NR B DTD 03/01/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418751
REVISION NR C DTD 07/12/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418774
REVISION NR C DTD 10/24/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418802
REVISION NR E DTD 02/09/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418922
REVISION NR F DTD 01/30/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418936
REVISION NR A DTD 03/01/2005
PART PIECE NUMBER:
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
IAW REFERENCE DRAWING NR 19207 12442876
REVISION NR D DTD 08/10/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442898
REVISION NR B DTD 10/20/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443081
REVISION NR D DTD 05/05/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443585
REVISION NR C DTD 10/20/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443588
REVISION NR A DTD 10/20/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12414308
REVISION NR D DTD 02/09/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12414307
REVISION NR E DTD 09/22/2016
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418591
REVISION NR B DTD 10/30/2003
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418592
REVISION NR E DTD 09/28/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418628
REVISION NR C DTD 04/01/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418629
REVISION NR A DTD 04/01/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418632
REVISION NR D DTD 06/27/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418633
REVISION NR B DTD 04/01/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418753
REVISION NR C DTD 03/01/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418760
REVISION NR C DTD 11/08/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423044
REVISION NR DTD 03/05/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423262
REVISION NR A DTD 05/04/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423270
REVISION NR DTD 07/09/2003
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423274
REVISION NR DTD 07/09/2003
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418826
REVISION NR C DTD 11/08/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418960
REVISION NR C DTD 01/18/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418653
REVISION NR E DTD 01/23/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12420301
REVISION NR E DTD 01/06/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12421889
REVISION NR C DTD 04/13/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443590
REVISION NR C DTD 12/10/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12417246
REVISION NR E DTD 02/23/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12417247
REVISION NR E DTD 02/23/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12424710
REVISION NR A DTD 10/25/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423255
REVISION NR B DTD 09/26/2007
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423278
REVISION NR A DTD 03/12/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423279
REVISION NR A DTD 09/28/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442851
REVISION NR B DTD 05/22/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418568
REVISION NR D DTD 06/27/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12414743
REVISION NR D DTD 06/27/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418666
REVISION NR H DTD 08/10/2011
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
IAW REFERENCE DRAWING NR 19207 12423191
REVISION NR C DTD 04/25/2007
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423192
REVISION NR B DTD 10/27/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423193
REVISION NR A DTD 02/26/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423199
REVISION NR B DTD 08/29/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423260
REVISION NR C DTD 03/13/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423277
REVISION NR DTD 07/14/2003
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423285
REVISION NR A DTD 02/23/2007
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423288
REVISION NR DTD 07/13/2003
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442850
REVISION NR D DTD 08/10/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12417336
REVISION NR G DTD 02/23/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12417337
REVISION NR G DTD 02/23/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418665
REVISION NR E DTD 05/14/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12420325
REVISION NR H DTD 10/24/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12418649
REVISION NR D DTD 10/15/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423300
REVISION NR C DTD 01/30/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12420557
REVISION NR F DTD 12/06/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12422107
REVISION NR F DTD 01/23/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423194
REVISION NR B DTD 02/09/2012
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423283
REVISION NR B DTD 12/19/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423286
REVISION NR D DTD 07/18/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423287
REVISION NR D DTD 07/18/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423311
REVISION NR B DTD 03/09/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423312
REVISION NR H DTD 01/24/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442852
REVISION NR C DTD 12/30/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442858
REVISION NR K DTD 01/23/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442863
REVISION NR D DTD 12/19/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442873
REVISION NR E DTD 12/19/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442879
REVISION NR C DTD 12/19/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442897
REVISION NR D DTD 12/19/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442910
REVISION NR C DTD 12/16/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12442954
REVISION NR C DTD 12/16/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443038
REVISION NR D DTD 07/02/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443185
REVISION NR D DTD 03/09/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443405
REVISION NR G DTD 07/18/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443583
REVISION NR C DTD 01/23/2014
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
IAW REFERENCE DRAWING NR 19207 12443584
REVISION NR E DTD 01/23/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443586
REVISION NR B DTD 01/23/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443587
REVISION NR D DTD 01/23/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12443592
REVISION NR C DTD 07/02/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12509178
REVISION NR DTD 04/09/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12542694
REVISION NR DTD 05/14/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12562998
REVISION NR DTD 11/05/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12563001
REVISION NR DTD 11/05/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12563003
REVISION NR DTD 11/05/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12563004
REVISION NR DTD 11/05/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423293
REVISION NR A DTD 03/01/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12423313
REVISION NR DTD 02/03/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 75Q65 12443585
REVISION NR C DTD 03/02/2015
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 75Q65 12418922
REVISION NR E DTD 01/15/2015
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .
0001 0076680813 0001 EA 5.000
NSN/MATERIAL:2510015218067
DELIVERY (IN DAYS):0128
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 22 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PR: 0076680813 PRLI: 0001 CONT’D
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.
Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:
•,,All Section “D” Packaging and Marking Clauses take precedence over
ASTM D3951.
•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.
•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:04/08/2019 Original Required Delivery Date:08/05/2019
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 22 PAGES
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)
SECTION I - CONTRACT CLAUSES
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEPT 2013) (DFARS)
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)
252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT
INFORMATION (OCT 2016) (DFARS)
252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) (DFARS)
252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016)
(DFARS)
252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY
COMPANIES (SEP 2006) DFARS (JUN 2018) (DFARS)
252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)
252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (DFARS)
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (DFARS)
(a) Definitions. As used in this clause—
“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.
“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.
(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall—
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/
(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.acquisition.gov https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 22 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
CONTINUED ON NEXT PAGE
WAWF for this contract/order:
(1) Document type. The Contractor shall use the following document type(s).
*** When creating documents in Wide Area Workflow, both an invoice and receiving report are required for origin inspection awards or awards shipping to a DLA depot for stock regardless of inspection point (see clause 252.246-7000 for additional information regarding receiving reports). For awards requiring both a receiving report and invoice, a combo type document may be used. For awards in accordance with fast payment procedures, only create an invoice and check the Fast Payment Procedure in Wide Area Workflow. See clause 252.232-7006 for further Wide Area Workflow information. For service contracts, a two-in-one invoice is required. (DoDAAC information should be completed.)***
Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)
(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.
____________________ *** SEE AWARD ***____________________
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in
WAWF
Pay Official DoDAAC See Resulting Award- Block 14 of 1155
Issue By DoDAAC See Block 5 of Form SF18
Admin DoDAAC See Resulting Award- Block 7 of Form 1155
Inspect By DoDAAC If at Origin- see Admin DODAAC, if at Dest- see
Ship to Ship To Code See Schedule in Section B of Form 1155 Ship From Code TBD
Mark For Code N/A
Service Approver (DoDAAC)
N/A
Service Acceptor (DoDAAC)
N/A
Accept at Other DoDAAC N/A
LPO DoDAAC N/A
DCAA Auditor DoDAAC N/A
Other DoDAAC(s) N/A
(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 22 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
CONTINUED ON NEXT PAGE
and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.
(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.
____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.
____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________
(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.
(End of clause)
252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)
252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)
252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) (DFARS)
252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) (DFARS)
52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017) (FAR)
52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) (FAR)
52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) (FAR)
52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)
52.213-4 TERMS AND CONDITIONS—SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL ITEMS) (JAN 2018) (FAR)
(c) FAR . This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
FAR: https://www.acquisition.gov/?q=browsefar
DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx
52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES, ALT I (JUL 2014) (FAR) As prescribed in 22.1408(b), add the following as a preamble to the clause:
Notice: The following term(s) of this clause are waived for this contract: _______________ [List term(s)].
52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) (FAR) https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2022_14.html
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 22 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) (FAR)
52.243-1 CHANGES - FIXED PRICE (AUG 1987) (FAR)
52.246-2 INSPECTION OF SUPPLIES- FIXED PRICE (AUG 1996) (FAR)
52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) (FAR)
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS
252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (DFARS)
252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) (DFARS)
52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) (FAR)
(a) Definitions. As used in this provision–
“Commercial and Government Entity (CAGE) code” means–
(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or
(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.
“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.
“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.
(b) The Offeror represents that it has or does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.
(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:
Immediate owner CAGE code: ____________________
Immediate owner legal name: ______________________
(Do not use a “doing business as” name)
Is the immediate owner owned or controlled by another entity?: Yes or No.
(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:
Highest-level owner CAGE code: ___________________
Highest-level owner legal name: ___________________ (Do not use a “doing business as” name)
(End of provision)
52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2018) (FAR)
(a) The North American Industry classification System (NAICS) code for this acquisition is ___SEE SECTION A OF FORM SF18___ .
(2) The small business size standard is ___SEE SECTION A OF FORM SF18___.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 22 PAGES
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)
CONTINUED ON NEXT PAGE
(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.
(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.
(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph
(d) of this provision instead of completing the corresponding individual representations and certification in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:
[_] (i) Paragraph (d) applies.
[_] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.
(c)(1) The following representations or certifications in SAM are applicable to this solicitation as indicated:
(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless --
(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;
(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or
(C) The solicitation is for utility services for which rates are set by law or regulation.
(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.
(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation. This provision applies to all solicitations.
(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.
(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that --
(A) Are not set aside for small business concerns;
(B) Exceed the simplified acquisition threshold; and
(C) Are for contracts that will be performed in the United States or its outlying areas.
(vi) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations --Representation.
(vii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.
(viii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.
(ix) 52.214-14, Place of Performance --Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.
(x) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.
(xi) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.
(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.
(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.
(xii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.
(xiii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.
(xiv) 52.222-25, Affirmative Action Compliance.This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.
(xv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/FARTOCP13.html https://www.acquisition.gov/sites/default/file
s/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_214.html https://www.acquisition.gov/sites/default/files/current/far/html/52_215.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 22 PAGES
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)
CONTINUED ON NEXT PAGE
the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.
(xvi) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA -designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.
(xvii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA -designated items.
(xviii) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals -Representation. This provision applies to solicitation that include the clause at 52.204-7.
(xix) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.
(xx) 52.225-4, Buy American --Free Trade Agreements --Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225-3.
(A) If the acquisition value is less than $25,000, the basic provision applies.
(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.
(C) If the acquisition value is $50,000 or more but is less than $80,317, the provision with its Alternate II applies.
(D) If the acquisition value is $80,317 or more but is less than $100,000, the provision with its Alternate III applies.
(xxi) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.
(xxii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan --Certification. This provision applies to all solicitations.
(xxiii) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. This provision applies to all solicitations.
(xxiv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.
(2) The following representations or certifications are applicable as indicated by the Contracting Officer:
___ (i) 52.204-17, Ownership or Control of Offeror.
___ (ii) 52.204-20, Predecessor of Offeror.
___ (iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.
___ (iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.
___ (v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.
___ (vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA-Designated Products (Alternate I only).
___ (vii) 52.227-6, Royalty Information.
___ (A) Basic.
___ (B) Alternate I.
___ (viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.
(d) The offeror has completed the annual representations and certifications electronically via the SAM Web site accessed through https://www.
acquisition.gov . After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.
FAR Clause # Title Date Change
Any changes provided by the offeror are applicable to…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.