RFQATTACH.SPE4AK18Q0024.0000.HTM

PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN

NSN: 3110009900475

CRITICAL APPLICATION ITEM

BALL,BEARING

P/N: MS19060-1006

UNIT OF ISSUE 1EA/PG = 100 BALLS

IDENTIFY TO:

BEARING RESTRICTION:

SAMPLING:

REFERENCE NUMBER: A0003

REFERENCE NUMBER: A1166

REFERENCE NUMBER: Q0106

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD ASTM F 2215

BASIC DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: MS19060-1006

PREP FOR DELIVERY

LINE ITEM 03889 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = X: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 51 - Marking shall be accomplish

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

ADDITIONAL INFORMATION:

REFERENCE NUMBER: A1054

NSN: 4730003635264

CAP, TUBE.

REFERENCE NUMBER: CA062

APPROVED SOURCES OF SUPPLY:

MOOG, INC. 94697 P/N 083-60598-1

SPS TECHNOLOGIES, LLC 01673 P/N AP396-04

PARKER-HANNIFIN CORPORATION 50599 P/N R44371D-04

ALCOA GLOBAL FASTENERS, INC. 66776 P/N RF5004C-D

LINE ITEM 03890 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:

UNIT CONT = A1: OPI = O:

INTRMDTE CONT = EC: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

NSN: 4730005470856

CAP, TUBE. ALUMINUM ALLOY MATERIAL. ANODIZED

RED FINISH. 0.5625 INCH 20 UNJS-3B THREADS

FEMALE, WITH O-RINGS. 0.767 INCH O.D. 0.400 INCH

LENGTH, PETROLEUM TYPE HYDRAULIC FLUID SYSTEM

APPLICATION

USED ON F-18 AIRCRAFT

REFERENCE NUMBER: CS072

REFERENCE NUMBER: CA061

APPROVED SOURCES OF SUPPLY:

NORTHROP GRUMMAN SYSTEMS 1W025 P/N 07A251D-06

EATON CORPORATION 00624 P/N AE16911-06

SPS TECHNOLOGIES, LLC 01673 P/N AP396-06

PARKER-HANNIFIN CORPORATION 50599 P/N R44371D-06

LINE ITEM 03891 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:

UNIT CONT = A1: OPI = O:

INTRMDTE CONT = DO: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 5306001431675

BOLT,MACHINE

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: IA646

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS003

REFERENCE NUMBER: IPE01

REFERENCE NUMBER: IQ001

REFERENCE NUMBER: CQC05

SPECS/STD/DRAWINGS:

I/A/W QAP 14153 QAP-EQ003

REFNO DTD 06 SEP 23

AMEND NR A DTD 98 SEP 10

TYPE NUMBER:

I/A/W SPEC NR MS21288B NOT 1

BASIC DTD 06 OCT 03

AMEND NR B DTD 91 OCT 21

TYPE NUMBER: MS21288-06

LINE ITEM 03892 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 100: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:

UNIT CONT = D3: OPI = O:

INTRMDTE CONT = 10: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 5330000273590

RETAINER,PACKING

//SPECIAL OXYGEN CLEANING AND PACKAGING IAW MIL-STD-1330//

UNIT CONTAINER IS IAW MIL-DTL-117 TYPE II, CLASS C, STYLE 1

WATERPROOF, GREASEPROOF, OPAQUE BAG.

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: ZOXRE

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP042

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 09 APR 23

TYPE NUMBER: STD P/N MS28774-010 CP

I/A/W STD NR MIL-STD-1330D(1)

REFNO DTD 06 OCT 03

AMEND NR D DTD 07 JUN 28

TYPE NUMBER:

I/A/W DRAWING NR 14153 02704

REFNO DTD 06 OCT 06

AMEND NR C DTD 02 JUL 17

TYPE NUMBER:

LINE ITEM 03893 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = BV: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

UNIT CONTAINER IS IAW MIL-DTL-117 TYPE II, CLASS C

, STYLE 1

WATERPROOF, GREASEPROOF, OPAQUE BAG.

REFERENCE NUMBER: IP042

NSN: 5330004192969

RETAINER, PACKING

PLASTIC (TFE)

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IA646

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 09 APR 23

TYPE NUMBER: MS28774-022

LINE ITEM 03894 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 050: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = D3: OPI = O:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

SPECIAL CUSHIONING CODES ZZ AND Z/

ITEMS SHALL BE ARRANGED SNUGLY SIDE BY

SIDE ON A RIGID CYLINDRICAL FIBERBOARD,

PLASTIC OR METAL CASE AND RETAINED AT THE

THE ENDS BY SUITABLE PLASTIC RINGS.

NSN: 5330005856937

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 09 APR 23

TYPE NUMBER: P/N MS28774-004

I/A/W NON GOVT STD SAE-AS8791A

REFNO DTD 06 OCT 07

AMEND NR A DTD 06 OCT 07

LINE ITEM 03895 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 050: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = D3: OPI = O:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

SPECIAL CUSHIONING CODES ZZ AND Z/

ITEMS SHALL BE ARRANGED SNUGLY SIDE BY

SIDE ON A RIGID CYLINDRICAL FIBERBOARD,

PLASTIC, OR METAL CASE AND RETAINED AT

NSN: 5330008334210

REFERENCE NUMBER: ZQA03

REFERENCE NUMBER: IQ068

REFERENCE NUMBER: IPE01

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: IS046

REFERENCE NUMBER: ZE001

SPECS/STD/DRAWINGS:

I/A/W QAP 14153 QAP-EQ003

REFNO DTD 06 SEP 23

AMEND NR A DTD 98 SEP 10

TYPE NUMBER:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 06 OCT 03

TYPE NUMBER: MS28774-017

I/A/W NON GOVT STD SAE AS8791B

REFNO DTD 09 MAR 24

AMEND NR B DTD 09 MAR 24

LINE ITEM 03896 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = BE: OPI = M:

INTRMDTE CONT = D3: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

NSN: 5330008553430

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 09 APR 23

TYPE NUMBER: MS28774-023

LINE ITEM 03897 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 050: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = D3: OPI = O:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

SUPPLEMENTAL INSTRUCTIONS

SPECIAL CUSHIONING CODES ZZ AND Z/

ITEMS SHALL BE ARRANGED SNUGLY SIDE BY

SIDE ON A RIGID CYLINDRICAL FIBERBOARD,

PLASTIC, OR METAL CASE AND RETAINED AT

NSN: 5330010209511

Unit containers (bags) must be IAW MIL-DTL-117 Type II, Class C, Style 1 waterproof, greaseproof, opaque bag.

//SPECIAL OXYGEN CLEANING AND PACKAGING IAW MIL-STD-1330//

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: ZOXRE

REFERENCE NUMBER: IP042

REFERENCE NUMBER: IS026

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774L(2) NOT 2

BASIC DTD 06 OCT 03

AMEND NR 2 DTD 06 OCT 03

TYPE NUMBER: MS28774-012CP

I/A/W DRAWING NR 14153 02704

REFNO DTD 06 OCT 06

AMEND NR D DTD 04 JUN 30

LINE ITEM 03898 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = BV: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

NSN: 5330010209513

Unit containers (bags) must be IAW MIL-DTL-117 Type II, Class C, Style 1 waterproof, greaseproof, opaque bag.

//SPECIAL OXYGEN CLEANING AND PACKAGING IAW MIL-STD-1330//

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: ZOXRE

REFERENCE NUMBER: IP042

REFERENCE NUMBER: IS026

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

REFNO DTD 06 OCT 03

AMEND NR M DTD 06 OCT 03

TYPE NUMBER: MS28774-014 CP

I/A/W STD NR MIL-STD-1330D(1)

BASIC DTD 06 OCT 03

AMEND NR D DTD 06 OCT 03

TYPE NUMBER:

I/A/W DRAWING NR 14153 02704

REFNO DTD 06 OCT 06

LINE ITEM 03899 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = BV: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

NSN: 5330010209518

//SPECIAL OXYGEN CLEANING AND PACKAGING REQUIRED//

REFERENCE NUMBER: IS001

REFERENCE NUMBER: ZOXRE

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP042

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 06 OCT 03

TYPE NUMBER: MS28774-016CP

I/A/W STD NR MIL-STD-1330D(1)

REFNO DTD 06 OCT 03

AMEND NR D DTD 06 OCT 03

TYPE NUMBER:

I/A/W DRAWING NR 14153 02704

REFNO DTD 06 OCT 06

LINE ITEM 03900 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = BV: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

NSN: 5331010501538

O-RING

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: CS373

REFERENCE NUMBER: IP061

REFERENCE NUMBER: IA646

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: M83461/1-017

I/A/W NON GOVT STD SAE AS83461/1

BASIC DTD 09 OCT 26

AMEND NR DTD 09 OCT 26

TYPE NUMBER: M83461/1-017

LINE ITEM 03901 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5330010992566

//SPECIAL OXYGEN CLEANING AND PACKAGING REQUIRED//

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP042

REFERENCE NUMBER: IA646

REFERENCE NUMBER: A1202

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZE002

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

REFNO DTD 06 OCT 03

AMEND NR M DTD 09 APR 23

TYPE NUMBER: MS28774-018CP

I/A/W STD NR MIL-STD-1330D(1)

REFNO DTD 06 OCT 03

AMEND NR D DTD 07 JUN 28

TYPE NUMBER:

I/A/W DRAWING NR 14153 02704

BASIC DTD 06 OCT 06

LINE ITEM 03902 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

NSN: 5330011198397

//SPECIAL OXYGEN CLEANING AND PACKAGING REQUIRED//

REFERENCE NUMBER: ZQA03

REFERENCE NUMBER: ZOXRE

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

REFERENCE NUMBER: IS001

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: IPE03

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 09 APR 23

TYPE NUMBER: MS28774-021

I/A/W DRAWING NR 14153 02704

REFNO DTD 06 OCT 06

AMEND NR D DTD 04 JUN 30

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS8791B

REFNO DTD 09 MAR 24

LINE ITEM 03903 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = ZZ: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

SPECIAL PACKAGING INSTRUCTION (SPI):

PACKAGING/MARKING SHALL BE IN ACCORDANCE

WITH DSCP DRAWING NUMBER 02704.

NSN: 5330012211122

PACKING, PREFORMED O-RING

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP061

REFERENCE NUMBER: IQPL1

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS83461/1

BASIC DTD 11 APR 29

AMEND NR DTD 11 APR 29

TYPE NUMBER: M83461/1-023

LINE ITEM 03904 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5330012254218

IDENTIFY TO:

MIL-STD-130N, 17 DEC 2007

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

QAP EQ003 APPLIES

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION

TESTING,IS HEREBY INCORPORATED,AND MAY BE

INVOKED AT THE DISCRETION OF THE PROCUREMENT

ACTIVITY.

ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs).

Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4.

Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor".

Quality conformance inspection requirements shall be in accordance with clause 52.246-9064.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT.

** THIS NSN IS PART OF THE 21N PROGRAM **

THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM

(CSI)

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

REFERENCE NUMBER: ZQA03

SPECS/STD/DRAWINGS:

I/A/W QAP 14153 QAP-EQ003

REFNO DTD 06 SEP 23

AMEND NR A DTD 98 SEP 10

TYPE NUMBER:

I/A/W SPEC NR MS28774M

BASIC DTD 09 SEP 26

AMEND NR 2 DTD 09 SEP 26

TYPE NUMBER: MS28774-011

I/A/W NON GOVT STD SAE AS8791B

REFNO DTD 09 MAR 24

LINE ITEM 03905 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = BE: OPI = M:

INTRMDTE CONT = D3: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

I

NSN: 5330012592657

//SPECIAL OXYGEN CLEANING AND PACKAGING IAW MIL-STD-1330//

UNIT CONTAINER IS IAW MIL-DTL-117 TYPE II, CLASS C, STYLE 1

WATERPROOF, GREASEPROOF, OPAQUE BAG.

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: ZOXRE

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP042

REFERENCE NUMBER: ZE001

SPECS/STD/DRAWINGS:

I/A/W SPEC NR MS28774M

BASIC DTD 06 OCT 03

AMEND NR M DTD 06 OCT 03

TYPE NUMBER: MS28774-008CP

I/A/W STD NR MIL-STD-1330D(1)

REFNO DTD 06 OCT 03

AMEND NR D DTD 06 OCT 03

TYPE NUMBER:

I/A/W DRAWING NR 14153 02704

REFNO DTD 06 OCT 06

LINE ITEM 03906 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = ZZ: CLNG/DRY = Z: PRESV MAT = Z

WRAP MAT = ZZ: CUSH/DUNN MAT = ZZ: CUSH/DUNN THKNESS = Z:

UNIT CONT = BV: OPI = M:

INTRMDTE CONT = ZZ: INTRMDTE CONT QTY = ZZZ:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: ZZ - Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

UNIT CONTAINER IS IAW MIL-DTL-117 TYPE II, CLASS C

, STYLE 1

WATERPROOF, GREASEPROOF, OPAQUE BAG.

NSN: 5330013630744

PACKING, PREFORMED (O-RING)

REFERENCE NUMBER: IS046

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP037

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZE002

REFERENCE NUMBER: ZE001

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD AMS-P-83461/1

BASIC DTD 06 OCT 07

AMEND NR A DTD 06 OCT 07

LINE ITEM 03907 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331010431419

REFERENCE NUMBER: IP061

REFERENCE NUMBER: IQPL1

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS83461/1

REFNO DTD 09 OCT 26

TYPE NUMBER: M83461/1-016

LINE ITEM 03908 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331010460629

IDENTIFY TO:

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP061

REFERENCE NUMBER: IQPL1

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W STD NR MIL-STD-413C NOT 2

REFNO DTD 06 OCT 03

AMEND NR C DTD 11 MAR 17

TYPE NUMBER:

I/A/W NON GOVT STD SAE AMS-P-83461

BASIC DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS83461/1

REFNO DTD 09 OCT 26

TYPE NUMBER: M83461/1-014

LINE ITEM 03909 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = BV: OPI = M:

INTRMDTE CONT = 10: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331010463299

PACKING, PREFORMED /O-RING/

REFERENCE NUMBER: IP061

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: IQPL1

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZE001

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

BASIC DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS83461/1

REFNO DTD 09 OCT 26

TYPE NUMBER: M83461/1-018

LINE ITEM 03910 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = 10: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331010470435

THIS NSN IS PART OF THE 21N PROGRAM

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

REFERENCE NUMBER: ZQA03

REFERENCE NUMBER: QE002

REFERENCE NUMBER: CQMWD

REFERENCE NUMBER: CS046

REFERENCE NUMBER: CQSLY

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZD025

REFERENCE NUMBER: IPE04

REFERENCE NUMBER: CQC20

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AS83461/1

BASIC DTD 09 OCT 26

AMEND NR DTD 09 OCT 26

TYPE NUMBER: M83461/1-011

I/A/W NON GOVT STD SAE-AMS-P-83461

REFNO DTD 08 FEB 01

AMEND NR DTD 08 FEB 01

LINE ITEM 03911 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = 10: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

REFERENCE NUMBER: CS284

NSN: 5331010885363

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS.

THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED

BY THE PERFORMANCE REVIEW INSTITUTE,

161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA

15086-7527. TO VIEW CONTRACTORS CURRENTLY

APPROVED BY (PRI) GO TO WWW.PRI@SAE.ORG

THE MANUFACTURER FOR THE QPL ITEM MUST BE

APPROVED FOR THE QPL ITEM AT THE TIME OF

THE CONTRACT AWARD.

QAP EQ003 APPLIES

TYPE I 180 MONTHS (15 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE SHALL

BE 15 YEARS FROM CURE DATE.

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION

TESTING,IS HEREBY INCORPORATED,AND MAY BE

INVOKED AT THE DISCRETION OF THE PROCUREMENT

ACTIVITY.

ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs).

Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively. ASQ H1331 takes precedence over non-government standard ASQ Z1.4.

Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor".

Quality conformance inspection requirements shall be in accordance with clause 52.246-9064.

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT.

** THIS NSN IS PART OF THE 21N PROGRAM **

THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM

(CSI)

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

REFERENCE NUMBER: ZQA03

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: M83461/1-010

I/A/W NON GOVT STD SAE AS83461/1

BASIC DTD 09 OCT 26

TYPE NUMBER: M83461/1-010

LINE ITEM 03912 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331011071149

SYNTHETIC RUBBER

REFERENCE NUMBER: IS046

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP061

REFERENCE NUMBER: IQPL1

REFERENCE NUMBER: IQA01

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: M83461/1-021

I/A/W NON GOVT STD SAE AMS-P-83461/1A

BASIC DTD 06 OCT 07

TYPE NUMBER: M83461/1-021

LINE ITEM 03913 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331011074962

SYNTHETIC RUBBER

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IP061

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: IA646

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

BASIC DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: M83461/1-004

I/A/W NON GOVT STD SAE AS83461/1

REFNO DTD 09 OCT 26

TYPE NUMBER: M83461/1-004

LINE ITEM 03914 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

NSN: 5331011195073

IDENTIFY TO

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IS026

REFERENCE NUMBER: IS034

REFERENCE NUMBER: IP029

REFERENCE NUMBER: IS083

REFERENCE NUMBER: IA061

APPROVED SOURCES OF SUPPLY:

GRIMES AEROSPACE CO 00672 P/N 893V286

LINE ITEM 03915 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

NSN: 5331012321484

REFERENCE NUMBER: IP061

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS83461/1

BASIC DTD 09 OCT 26

TYPE NUMBER: M83461/1-022

LINE ITEM 03916 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = XXX:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

NSN: 5331013639568

MIL-STD-130N, 17 DEC 2007

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

ACTUAL MFR AND SUPPLIER'S CAGE SHALL BE CITED.

REFERENCE NUMBER: ZQA03

REFERENCE NUMBER: CQSLY

REFERENCE NUMBER: CS046

REFERENCE NUMBER: CQC20

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD SAE AMS-P-83461

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER:

I/A/W NON GOVT STD SAE AS83461/1

BASIC DTD 09 OCT 26

TYPE NUMBER: M83461/1-012

LINE ITEM 03917 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = X: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = BE: OPI = M:

INTRMDTE CONT = XX: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 32 - Type I, shelf life

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

TYPE I 180 MONTHS (15 YEAR) SHELF LIFE ITEM

MANUFACTURED AND EXPIRATION SHELF LIFE DATE

IS REQUIRED ON LABEL

OPAQUE BAG REQUIRED

REFERENCE NUMBER: CS284

NSN: 5340007262214

CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SE

<H>NOTE: ONE PACKAGE CONSIST OF 50 CAP-PLUGS EACH</>

REFERENCE NUMBER: IS001

REFERENCE NUMBER: IA646

REFERENCE NUMBER: IPE03

REFERENCE NUMBER: CQC05

REFERENCE NUMBER: ZE001

REFERENCE NUMBER: ZE002

REFERENCE NUMBER: ZD025

SPECS/STD/DRAWINGS:

I/A/W NON GOVT STD NAS834

REFNO DTD 06 OCT 07

AMEND NR DTD 06 OCT 07

TYPE NUMBER: NAS834-69

I/A/W NON GOVT STD NAS847

BASIC DTD 06 OCT 07

LINE ITEM 03918 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 050: PRES MTHD = 10: CLNG/DRY = 1: PRESV MAT = 0

WRAP MAT = 00: CUSH/DUNN MAT = 00: CUSH/DUNN THKNESS = 0:

UNIT CONT = D3: OPI = O:

INTRMDTE CONT = D3: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV A

DATED 04090

SUPPLEMENTAL INSTRUCTIONS

UNIT OF ISSUE PKG = 50 TO PKG

REFERENCE NUMBER: A0073

NSN: 5365011212064

SHIM

EXCEPTION TO THE CITED DWG:

DELETE PARAGRAPH 4. USE AMS-DTL-22499 IN LIEU OF

MIL-DTL-22499

REFERENCE NUMBER: A0003

REFERENCE NUMBER: Q0106

SPECS/STD/DRAWINGS:

I/A/W DRAWING NR 76301 4M65

BASIC DTD 06 SEP 18

AMEND NR AA DTD 02 JAN 23

TYPE NUMBER: 4M65-04004

I/A/W DRAWING NR 76301 6M148

REFNO DTD 06 SEP 21

AMEND NR G DTD 98 SEP 08

LINE ITEM 03919 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP = 001: PRES MTHD = 33: CLNG/DRY = 1: PRESV MAT = Z

WRAP MAT = XX: CUSH/DUNN MAT = XX: CUSH/DUNN THKNESS = X:

UNIT CONT = XX: OPI = M:

INTRMDTE CONT = E5: INTRMDTE CONT QTY = AAA:

PACK CODE = U:

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE: 00 - No special marking

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer- Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required on Military Shipping Labels in accordance with MIL-STD-129, Revision P, dated December 15, 2002 (but see DLAD 52.211-9010(D) for exceptions to the requirement for MSL and 2D symbols). See the DLA packaging web site identified in DLAD 52.211-9010(E) for change notices to MIL-STD-129P that apply. 2D bar coding shall be in accordance with ISO/IEC 15438, ISO/IEC 15434 (ANSI MH10.8.3) and DoD 4500.9-R. MSL linear (code 3 of 9 or code 39) bar coding shall be in accordance with ISO/IEC 16388. Shipping label stock quality shall meet MIL-PRF-61002. Bar code print quality shall meet ANSI MH10.8-2000 or ANSI X3.182-1990 (R2000) for applicable 2D and/or linear bar codes. All DVD shipments shall meet additional linear bar coding requirements in DLAD 52.211-9010(C). Except for the Transportation Control Number (TCN), which must always be present on the Military Shipping Label, when the contract/order omits any other data elements as defined in MIL-STD-129P and if the information is not available from the Administrative Contracting Office, then the field is not required as part of the Military Shipping Label and may be left blank. If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence.

REFERENCE NUMBER A1054:

PRESERVATION, PACKAGING, PACKING, AND MARKING

REQUIREMENTS SHALL BE IN ACCORDANCE WITH

MIL-DTL-197L.

1. METHOD OF PRESERVATION SHALL BE DETERMINED BY

BEARING TYPE AND SIZE (REFER TO TABLE I).

2. PARAGRAPH 3.10.2, SELECTION OF UNIT

PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR

PRESERVATIVE COMPOUND SHALL BE DETERMINED

DEPENDANT UPON BEARING TYPE AND CLOSURE IN

ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II.

FOR PRESERVATION PROCESS CONTROLS, DEPENDANT

UPON BEARING TYPE, CLOSURE, AND LUBRICANT,

PARAGRAPHS 3.4 THROUGH 3.9 APPLY.

3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS

OF PARAGRAPH 3.12.4 APPLY.

4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE

TO THE QUALITY ASSURANCE VERIFICATION

REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF

MIL-DTL-197L.

...END OF SPECIAL PACKAGING INSTRUCTIONS...

REFERENCE NUMBER IP042:

SPECIAL PACKAGING INSTRUCTION (SPI):

PACKAGING/MARKING SHALL BE IN ACCORDANCE

WITH LATEST REVISION OF DLA TROOP SUPPORT

DRAWING NUMBER 02704 AND MIL-STD-1330.

IN ADDITION, UNIT CONTAINER SHOULD BE

IAW MIL-DTL-117 TYPE II, CLASS C, STYLE 1

WATERPROOF, GREASEPROOF, OPAQUE BAG

REFERENCE NUMBER CS284:

EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,

CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE

CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.

REFERENCE NUMBER A0073:

WHENEVER POSSIBLE AND WHEN PERMITTED BY THE

TERMS OF THE CONTRACT, AVOID THE USE OF

PLASTICS AS WRAPPING, CUSHIONING, OR

DUNNAGE MATERIALS.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER A0003:

MIL-STD-130N DATED 17 DEC 2007.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER A1166:

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE

FOR A BEARING MANUFACTURED IN THE UNITED STATES,

ITS OUTLYING AREAS, OR CANADA AND FOR EACH BALL

OR ROLLER BEARING, THE COST OF THE BEARING

COMPONENTS (BEARING ELEMENT, RETAINER, INNER

RACE, OR OUTER RACE) MINED, PRODUCED OR

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING

AREAS, OR CANADA MUST EXCEED 50% OF THE TOTAL

COST OF THE BEARING COMPONENTS OF THAT BALL OR

ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016,

RESTRICTION ON ACQUISITION OF BALL AND ROLLER

BEARINGS (DEC 2010).

A CONTRACTOR'S DECLARATION ON THE

DOMESTIC/FOREIGN NATURE OF MATERIAL BEING

OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN

BEARING WEBSITE AT http://www.aviation.dla.mil/U serWeb/ForeignBearingWaiver/index.htm TO OBTAIN

A COPY OF THE CONTRACTOR'S DECLARATION FORM.

PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR

SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE

TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR

QUOTE NOT BEING CONSIDERD FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEET THIS

SOURCING REQUIREMENT, THIS SOLICITATION MAY BE

CANCELLED AND A WAIVER MAY BE REQUESTED BY THE

PROCUREMENT ACTIVITY. UPON RECEIPT OF AN

APPROVED WAIVER FROM THE DOMESTIC SOURCING

RESTRICTION, THE REQUIREMENT MAY BE

RE-SOLICITED. SEE DFARS 225.7009-4, WAIVER,

RESTRICTION ON BALL AND ROLLER BEARINGS (DEC

2010).

REFERENCE NUMBER Q0106:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE

IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN

MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT

ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING

INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

REFERENCE NUMBER ZD025:

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL

MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON

SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY

NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE

INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND

CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY

OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER CA062:

THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR

EVALUATION PURPOSES, BUT LIMITED RIGHTS APPLY.

THE OFFEROR NEED PROVIDE ONLY ITS DATA FOR

EVALUATION.

REFERENCE NUMBER CS072:

CLASS 3 THREADS APPLY TO THIS NSN.

REFERENCE NUMBER CA061:

ADEQUATE DATA FOR THE EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY.THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

REFERENCE NUMBER IPE03:

CRITICAL ITEM - SOURCE INSPECTION REQUIRED.

REFERENCE NUMBER IA646:

THIS NSN IS PROCURED AS FULLY COMPETITIVE IN

ACCORDANCE WITH A MILITARY / FEDERAL

SPECIFICATION/STANDARD. SEE SECTION L, CLAUSE

52.211-2 FOR ORDERING SUCH DATA.

REFERENCE NUMBER IS001:

MIL-STD-130N, 17 DEC 2007

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER IS003:

ITEM SURFACE MARKING REQUIREMENT: IN ADDITION TO

MARKING REQUIREMENTS DEFINED BY TECHNICAL DATA,

THE MANUFACTURER'S SYMBOL IS REQUIRED AND SHALL

BE APPLIED DIRECTLY TO THE SURFACE OF THIS ITEM.

THE MANUFACTURER'S SYMBOL MUST BE LISTED IN

MIL-HDBK-57. DO NOT PLACE ANY MARKINGS ON

BEARING SURFACES. MANUFACTURER'S SYMBOL IS NOT

REQUIRED ON FASTENERS WITH A THREAD DIAMETER OF

0.190 INCHES AND SMALLER.

FOR MANUFACTURER'S SYMBOL REGISTRATION

INFORMATION AND INQUIRIES PLEASE VISIT THE

MIL-HDBK-57 URL AT:

http://www.troopsupport.dla.mil/ce/prod_services /logoreg.asp

REFERENCE NUMBER IPE01:

QAP EQ003 APPLIES

REFERENCE NUMBER IQ001:

DLAD clause 52.246-9000 Certificate of Quality Compliance (COQC) is hereby incorporated into this award.

REFERENCE NUMBER CQC05:

DLAD CLAUSE 52.246-9004,PRODUCT VERIFICATION

TESTING,IS HEREBY INCORPORATED,AND MAY BE

INVOKED AT THE DISCRETION OF THE PROCUREMENT

ACTIVITY.

REFERENCE NUMBER ZOXRE:

THIS ITEM MUST BE OXYGEN CLEANED. OFFEROR MUST

STATE

ON THE OFFER THAT THE ITEM WILL CONFORM TO

PROCESS

REQUIREMENTS DOCUMENT MIL-STD-1330

REFERENCE NUMBER IS026:

NO ASBESTOS AS DEFINED IN FED-STD-313 IS

PERMITTED IN THIS ITEM

REFERENCE NUMBER ZE001:

ASQ H1331 Table 1 Shall be used, and will take precedence over Sample Size Coding methods and Sampling Plan tables as outlined in military and federal specifications, standards, Commercial Item Descriptions (CIDs) prepared by DoD activities, and those sampling plans cited by military service and DLA Troop Support - Quality Assurance Provisions (QAPs).

Those documents that identify the classification of characteristics as critical, major, and minor, shall have corresponding associated AQL Index values of 0.10,1.0, and 4.0 respectively.

ASQ H1331 takes precedence over non-government standard ASQ Z1.4.

Those specifications, standards, CIDs, drawings and QAPs using sampling plans based on zero acceptance are excluded from these requirements, as are those not specifying characteristics as "critical", "major", and/or "minor".

REFERENCE NUMBER ZE002:

Quality conformance inspection requirements shall be in accordance with clause 52.246-9064.

REFERENCE NUMBER ZQA03:

THIS IS A NAVY IDENTIFIED CRITICAL SAFETY ITEM

(CSI)

ALL REQUESTS FOR WAIVERS OR DEVIATIONS MUST BE

FORWARDED TO THE DSC CONTRACTING OFFICER FOR

REVIEW AND APPROVAL.

ALL ITEMS OF SUPPLY SHALL BE MARKED IAW

MIL-STD-129. IN ADDITION, EACH UNIT PACK WILL

BE MARKED WITH LOT AND SERIAL NUMBER (IF

AVAILABLE),

CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S

CAGE CODE AND PART NUMBER.

REFERENCE NUMBER IQ068:

THIS IS A SAFETY CRITICAL ITEM.

PRODUCT VERIFICATION TESTING (PVT)

MANDATORY PRIOR TO CONTRACTOR'S

SHIPPING OF MATERIAL.

REFERENCE NUMBER IS046:

THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT

DLA DURING *OPEN SOLICITATION ONLY*.

TO RECEIVE A COPY OF THE DRAWING(S),

FOR EBS SOLICITATIONS USE URL

HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/

REFERENCE NUMBER CS373:

THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML

OR QPL ITEM. PRODUCT SUPPLIED TO THIS

SPECIFICATION SHALL BE MANUFACTURED BY AN

ACCREDITED MANUFACTURER (FOR COMPONENTS) AND/OR

ASSEMBLED BY AN ACCREDITIED MANUFACTURER OR

ACCREDITED ASSEMBLING DISTRIBUTOR (FOR

ASSEMBLIES) AS LISTED IN THE PRI QUALIFIED

MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS

LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS

AVAILABLE AT WWW.EAUDITNET.COM .

REFERENCE NUMBER IP061:

TYPE I 180 MONTHS (15 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER

SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE SHALL

BE 15 YEARS FROM CURE DATE.

REFERENCE NUMBER A1202:

Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team:

(Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

REFERENCE NUMBER IQPL1:

THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS.

THE (QPL) DOCUMENT IS PUBLISHED AND MAINTAINED

BY THE PERFORMANCE REVIEW INSTITUTE,

161 THRON HILL ROAD,WARRENDALE, PENNSYLVANIA

15086-7527. TO VIEW CONTRACTORS CURRENTLY

APPROVED BY (PRI) GO TO WWW.PRI@SAE.ORG

THE MANUFACTURER FOR THE QPL ITEM MUST BE

APPROVED FOR THE QPL ITEM AT THE TIME OF

THE CONTRACT AWARD.

REFERENCE NUMBER IP037:

TYPE I 120 MONTHS (10 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER

SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE SHALL

BE 10 YEARS FROM CURE DATE.

REFERENCE NUMBER QE002:

CLAUSE 52.246-15, CERTIFICATE OF CONFORMANCE, IS

NOT AUTHORIZED FOR THIS NSN.

REFERENCE NUMBER CQMWD:

REMINDER: THIS IS A CRITICAL ITEM AND ALL

MAJOR AND MINOR WAIVER/DEVIATION REQUESTS MUST

BE FORWARDED TO THE DSCC CONTRACTING OFFICER WHO

WILL COORDINATE THE REVIEW AND APPROVAL THROUGH

THE RESPONSIBLE ENGINEERING SERVICE ACTIVITY.

REFERENCE NUMBER CS046:

THIS NSN IS LISTED AS A PRIMARY QPL OR QML

THEREFORE THE QUALIFIED PRODUCTS LIST OR

QUALIFIED MANUFACTURERS LIST IS APPLICABLE.

REFERENCE NUMBER CQSLY:

THIS SHELF LIFE ITEM IS NON-EXTENDABLE, CODE Y,

WITH A TOTAL SHELF LIFE OF ONE HUNDRED EIGHTY

MONTHS. MATERIAL FURNISHED UNDER THIS CONTRACT/

ORDER SHALL HAVE AT LEAST 85% (153 MONTHS) OF

THE SHELF LIFE REMAINING AT TIME OF DELIVERY.

REFERENCE NUMBER IPE04:

SOURCE INSPECTION REQUIRED.

REFERENCE NUMBER CQC20:

THE INTERNATIONAL ORGANIZATION FOR

STANDARDIZATION (ISO) 9002 OR A "TAILORED"

PROGRAM MEETING THE FOLLOWING ISO 9002

PARAGRAPHS APPLIES:

4.5, DOCUMENT CONTROL: LIMITED TO INSPECTION

AND TESTING AS WELL AS APPLICABLE DRAWINGS,

SPECIFICATIONS AND INSTRUCTIONS REQUIRED BY

CONTRACT

4.6, PURCHASING: 4.6.1 AND LIMITED TO 4.6.2 A)

AND 4.6.4.2, ALL OTHER PARTS OF PARAGRAPH

ARE HEREBY DELETED

4.7, CUSTOMER-SUPPLIED PRODUCT:

4.8, PRODUCT IDENTIFICATION & TRACEABILITY:

4.10, INSPECTION & TESTING:

4.11, INSPECTION, MEASURING & TEST EQUIPMENT:

4.12, INSPECTION AND TEST STATUS:

4.13, CONTROL OF NONCONFORMING PRODUCT:

4.14, CORRECTIVE AND PREVENTIVE ACTION:

PARAGRAPH 4.14.3 APPLY TO PRODUCT ONLY

4.16, QUALITY RECORDS:

FAR CLAUSE 52.246-11 APPLIES

REFERENCE NUMBER IQA01:

QUALITY ASSURANCE DATA

REFERENCE NUMBER IS034:

SUGGESTED SOURCE FOR DDGM OF CANADA (56161) P/N:

ACM INDUSTRIES (0SHT0) PER PAT DAVIS, DLA TROOP

SUPPORT - IBAB

444-6318

REFERENCE NUMBER IP029:

TYPE I 60 MONTHS (5 YEAR) SHELF LIFE ITEM:

MATERIAL FURNISHED UNDER THIS CONTRACT/ORDER

SHALL

HAVE AT LEAST 85% OF THE SHELF LIFE

REMAINING AT TIME OF DELIVERY. SHELF LIFE

MARKINGS (CURE AND EXPIRATION DATES) SHALL

BE IN ACCORDANCE WITH MIL-STD-129, LATEST

REVISION, AND SHALL BE SHOWN IN

CALENDAR QUARTER AND YEAR. EXPIRATION DATE

SHALL BE 5 YEARS FROM CURE DATE.

REFERENCE NUMBER IS083:

WHEN THE PURCHASE ORDER TEXT (POT)

DESCRIBES THE REQUIRED PRODUCT(S) BY NAME AND

PART NUMBER OF A SPECIFIC ENTITY, BY THE NAMES

AND PART NUMBERS OF A NUMBER OF SPECIFIC

ENTITIES, OR BY THE NAME(S) AND PART NUMBER(S)

OF SPECIFIC ENTITY/ENTITIES AS MODIFIED BY

ADDITIONAL REQUIREMENTS SET FORTH IN THE POT,

ONLY THAT/THOSE PRODUCT(S) HAVE BEEN DETERMINED

TO MEET THE NEEDS OF THE GOVERNMENT AND ARE

ACCEPTABLE. SUCH PRODUCT(S) ARE "EXACT

PRODUCT(S)" AS DEFINED IN "DLAD 52.217-9002,

CONDITIONS FOR EVALUATION AND ACCEPTANCE OF

OFFERS FOR PART NUMBERED ITEMS."

A VENDOR OFFER/QUOTATION, "BID WITHOUT

EXCEPTION," IS A CERTIFICATION THAT THE "EXACT

PRODUCT," MANUFACTURED AND/OR SUPPLIED BY ONE

OF THE ENTITIES CITED IN THE POT WILL BE

FURNISHED UNDER THE CONTRACT OR ORDER. ANY

PRODUCT NOT MANUFACTURED AND/OR SUPPLIED

BY ONE OF THE ENTITIES CITED IN THE POT

IS AN "ALTERNATE PRODUCT," EVEN THOUGH IT

MIGHT BE MANUFACTURED IN ACCORDANCE WITH THE

DRAWING(S) AND/OR SPECIFICATIONS OF ONE OF THE

ENTITIES CITED IN THE POT.

IF AN ALTERNATE PRODUCT IS FURNISHED UNDER A

CONTRACT OR ORDER FOR AN EXACT PRODUCT, THE

ALTERNATE PRODUCT WILL BE AN UNAUTHORIZED

SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES

IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO

THE GOVERNMENT.

REFERENCE NUMBER IA061:

ADEQUATE DATA FOR EVALUATION OF ALTERNATE

OFFERS IS NOT AVAILABLE AT THE PROCUREMENT

AGENCY. THE OFFEROR MUST PROVIDE A COMPLETE

DATA PACKAGE INCLUDING DATA FOR THE APPROVED AND

ALTERNATE PART FOR EVALUATION.