SPE4A718T600D.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE4A7-18-T-600D

2. DATE ISSUED

2018 AUG 07

3. REQUISITION/PURCHASE REQUEST NO.

0075629996

RATING

DO-C9

DLA AVIATION

ASC SUPPLIER OPER AE AND AF DIV

8000 JEFFERSON DAVIS HWY

RICHMOND VA 23297

USA

Name: Donna Parham Buyer Code:GSV5128 Tel: 804-279-5919 Email: Donna.Parham@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 AUG 17

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED

ACQUISITIONS REVISION 50 (JULY 9, 2018) WHICH CAN BE FOUND ON THE WEB AT:

http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master%20Solicitation%20Rev-50%20July-9-18.pdf?ver=2018-07-09-071953-083

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 20

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 20 PAGES

SPE4A7-18-T-600D

CONTINUED ON NEXT PAGE

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

PROCUREMENT NOTE L16 - COMBINED SERVICE-DISABLED VETERAN-OWNED SMALL

BUSINESS/SMALL BUSINESS SET ASIDE INSTRUCTIONS - TYPE 1 APPLY

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413 SEE http://www.sba.gov/content/table-small-business-size-standards

FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

THE CONTRACTORS INSPECTION SYSTEM MUST COMPLY WITH ISO 9001:2015 OR

OTHER EQUIVALENT. IF QUOTING ‘OTHER EQUIVALENT’ SPECIFY WHAT ‘OTHER

EQUIVALENT’ STANDARD APPLIES.

Fast Pay does not apply to this solicitation

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION A

FIRST ARTICLE APPROVAL – CONTRACTOR TESTING REQUIRED (FAR 52.209-3 and

ALT I)

THE CONTRACTOR SHALL TEST 1 UNIT(S) OF

LOT/ITEM 1560 / 11589478 AS

SPECIFIED IN THIS CONTRACT. PROVIDE WRITTEN NOTICE TO THE CONTRACTING

OFFICER AND THE QAR AT LEAST FOURTEEN (14) CALENDAR DAYS PRIOR TO

SHIPMENT TO GOVERNMENT FOR FAT, TO ACCOMODATE IN-PROCESS VERIFICATION

AND/OR FINAL INSPECTION BY THE QAR. THE CONTRACTOR SHALL SUBMIT THE

FIRST ARTICLE TEST REPORT WITHIN 120 CALENDAR

DAYS FROM THE DATE OF THIS CONTRACT. NOTIFICATION AND SUBMITTAL

ADDRESSES ARE IAW PROCUREMENT NOTE H03. WITHIN

30 CALENDAR DAYS AFTER THE GOVERNMENT

RECEIVES THE TEST REPORT, THE CONTRACTING OFFICER SHALL NOTIFY THE

CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR

DISAPPROVAL OF THE FIRST ARTICLE. SEE PROCUREMENT NOTE H03:

SUPPLEMENTAL FIRST ARTICLE TESTTING REQUIREMENTS (SEP 2016) - FOR

ADDITIONAL FAT REQUIREMENTS.

DISPOSITION OF FAT UNITS IAW PARAGRAPH (e) OF FAR 52.209-3 OR 52.209-4.

FIRST ARTICLE – CONTRACTOR TESTING – DCMA DELEGATION

Notice to Contractor: The Defense Contract Management Agency (DCMA) Administrative Contracting Officer (ACO) is delegated the authority to approve/disapprove the First Article Test Report submitted in accordance with the requirements in this contract. Any reference to the Contracting Officer as it relates to submission of and approval/disapproval of the FAT Report shall be deemed to mean the DCMA

ACO.

Notice to ACO: The DCMA ACO shall forward a copy of the First Article Test Report and the DCMA ACO’s letter of approval/disapproval to the Contracting Officer at the buying activity and to the address identified in FAR Clause 52.209-3(b).

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION A

preclude DLA from making an award to another acceptable timely offer.

DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:

http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx

FAR 52.204-23, Products and Services Developed or Provided by Kaspersky

Lab and Other Covered Entities (Jul 2018), applies to all awards made on or after July 16, 2018.

Expedited delivery is encouraged for this item. In the instance that an automated evaluation is not used for this solicitation, Contracting

Officers may consider an evaluation preference for quotes/offers of fewer delivery days than the number of delivery days requested by the

Government. Therefore, suppliers are encouraged to submit their best possible delivery schedule.

Contractors shall not provide parts and supplies made using additive manufacturing (AM), unless AM is specifically authorized in the solicitation/contract. See procurement note L31.

Procurement History for NSN/FSC:011589478/1560

CAGE Contract Number Quantity Unit Cost AWD Date

7VUK2 SPE4A718PC712 231.000 298.95000 20180717

2B834 SPE4A718C0425 741.000 341.00000 20180621

3WGD1 SPE4A718PB881 342.000 334.88000 20180620

7XB86 SPE4A718P9766 237.000 0.35407 20180427

2B834 SPE4A718C0279 1749.000 344.00000 20180314

67351 SPE4A717P6142P00001 355.000 240.00000 20170222

0S222 SPE4A716MB756P00002 224.000 319.53000 20160826

96953 SPE4A715C0151P00001 1800.000 320.00000 20141218

96953 SPE4A715C0033 675.000 372.00000 20141009

8R034 SPE4A015M0019 12.000 733.00000 20141001

05RU8 SPE4A714M9666P00001 353.000 329.00000 20140606

6URB7 SPE4A714M5233P00001 288.000 182.50000 20140131

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION A

Procurement History for NSN/FSC:011589478/1560

CAGE Contract Number Quantity Unit Cost AWD Date

4DEY3 SPE4A714M3328P00001 587.000 182.50000 20131218

8R034 SPE4A713ME348P00002 515.000 197.34000 20130808

78286 SPRPA111G001YZ602 3.000 397.95000 20120410

96953 SPM4A712M6025P00001 532.000 245.00000 20120320

96953 SPM4A712C0063P00002 2267.000 212.00000 20111118

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Trasnportation utilizing Government contracts and rates. If this acquisition is for Foreign Military Sales (FMS) FDT will not apply. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. The VSM site can be found at: https://vsm.distribution.dla.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0075629996

NSN/MATERIAL:1560011589478

ITEM DESCRIPTION

FITTING ASSEMBLY,EN

FITTING ASSEMBLY,ENGINE MOUNT

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

***NOTE: SARGENT AEROSPACE & DEFENSE, LLC CAGE; 97613 IS THE SIKORSKY

AND AMCOM APPROVED SOURCE FOR THE BEARINGS IN THIS ASSEMBLY.. -101

BEARING

SAMPLING:

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

Contractor first article/preproduction approval testing required. Use DI-NDTI-80809B in preparation of the first article report. Current revision of MIL-HDBK-831 may also be used for report format guidance.

First article testing shall be conducted IAW applicable drawings and drawing notes, specification, engineering instructions and specific requirements set forth in the contract. Additionally, 100% dimensional characteristics check shall be performed and results provided to the contracting officer. The first article offered must be manufactured at the facilities in which production quantities are procured under the contract. Contractor shall provide a statement along with objective evidence that test and production items meet the material and process requirements of the contract. If applicable, DD form 1423 documentation shall be provided as required. Unless F.A.T sample(s) is degraded or destroyed in testing or submitted for government fit, form, function verification (when specified by contract), the F.A.T. samples(s) may be deliverable with the last production run of the contract.

Additional Wide Area Workkflow (WAWF) instructions for contractor first article test CLIN: The contractor shall code the receiving report for contractor first article test CLIN in WAWF as follows: Inspection at origin (source)- Enter the DCMA DODAAC listed on page 1 of the contract.

Acceptance at destination- Enter the issue by office DODAAC listed Ship to code- Enter the issue by office DODAAC listed on page 1 of the contract.

IAW BASIC DRAWING NR 78286 70305-02110

REVISION NR J DTD 01/01/1939

PART PIECE NUMBER: 70305-02110-043

IAW REFERENCE DRAWING NR 78286 SS9703

REVISION NR 1 DTD 09/16/1977

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS9703

REVISION NR 1 DTD 03/18/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8654

REVISION NR 12 DTD 03/07/2013

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 78286 SS8693

REVISION NR 07 DTD 12/18/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8743

REVISION NR 7 DTD 07/23/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8798

REVISION NR 17 DTD 04/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70305-22800

REVISION NR B DTD 09/27/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70305-22800

REVISION NR B DTD 06/23/1994

PART PIECE NUMBER:

IAW REFERENCE QAP 81996 FORG-STD-1

REVISION NR C DTD 10/14/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70305-02110

REVISION NR N DTD 04/03/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70305-02110

REVISION NR AL DTD 02/02/2009

PART PIECE NUMBER: 70305-02110-043

IAW REFERENCE DRAWING NR 81996 70305-02110

REVISION NR F DTD 07/28/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8630

REVISION NR 26 DTD 05/19/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8654

REVISION NR 11 DTD 12/18/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8805

REVISION NR 11 DTD 11/12/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8407

REVISION NR 11 DTD 05/20/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS5100

REVISION NR 39 DTD 10/27/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS9208

REVISION NR 55 DTD 04/14/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70305-22800

REVISION NR U DTD 03/01/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS70305-02110

REVISION NR A DTD 11/26/2014

IAW REFERENCE DRAWING NR 78286 SS8654

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REVISION NR 11 DTD 03/26/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70305-22800

REVISION NR B DTD 06/24/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81996 70305-02110-043

REVISION NR DTD 08/03/2017

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 0075629996 0001 EA 239.000

NSN/MATERIAL:1560011589478

DELIVERY (IN DAYS):0539

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0075629996 PRLI: 0001 CONT’D

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

SW3222

DLA DISTRIBUTION CORPUS CHRISTI TX

DDCT-S 540 FIRST STREET SE

CORPUS CHRISTI TX 78419-5255

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS

SEE DLAD PROC NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

SW3222

DLA DISTRIBUTION CORPUS CHRISTI TX

540 FIRST STREET SE BLDG 1846

GPS USE 100 NAS DR PH 361 961 2500

CORPUS CHRISTI TX 78419-5255

US

Need Ship Date:09/11/2019 Original Required Delivery Date:02/13/2020

CONTRACTOR FIRST ARTICLE TEST - THE NUMBER OF UNITS SHOWN SIGNIFIES THE

TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS

SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0002 0000000000 EA 1.000

NSN/MATERIAL:0001S00000053

DELIVERY (IN DAYS):0120

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: PRLI: CONT’D

THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE

CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO

NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE

ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT

THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.

THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES

THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED

BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN

SECTION A OF THIS SOLICITATION.

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 20 PAGES

CONTINUED ON NEXT PAGE

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEPT 2013) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016)

(DFARS)

252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY

COMPANIES (SEP 2006) DFARS (JUN 2018) (DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (DFARS)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.acquisition.gov https://wawf.eb.mil/ https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

*** When creating documents in Wide Area Workflow, both an invoice and receiving report are required for origin inspection awards or awards shipping to a DLA depot for stock regardless of inspection point (see clause 252.246-7000 for additional information regarding receiving reports). For awards requiring both a receiving report and invoice, a combo type document may be used. For awards in accordance with fast payment procedures, only create an invoice and check the Fast Payment Procedure in Wide Area Workflow. See clause 252.232-7006 for further Wide Area Workflow information. For service contracts, a two-in-one invoice is required. (DoDAAC information should be completed.)***

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

____________________ *** SEE AWARD ***____________________

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award- Block 14 of 1155

Issue By DoDAAC See Block 5 of Form SF18

Admin DoDAAC See Resulting Award- Block 7 of Form 1155

Inspect By DoDAAC If at Origin- see Admin DODAAC, if at Dest- see

Ship to Ship To Code See Schedule in Section B of Form 1155 Ship From Code TBD

Mark For Code N/A

Service Approver (DoDAAC)

N/A

Service Acceptor (DoDAAC)

N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) (DFARS)

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) (DFARS)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017) (FAR)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) (FAR)

52.204–23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY

KASPERSKY LAB AND OTHER COVERED ENTITIES (JUL 2018) FAR (JUL 2018) (FAR)

As prescribed in 4.2004, insert the following clause:

(a) Definitions. As used in this clause --

Covered article means any hardware, software, or service that --

(1) Is developed or provided by a covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a covered entity.

Covered entity means --

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any covered article. The Contractor is prohibited from --

(1) Providing any covered article that the Government will use on or after October 1, 2018; and

(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement. (1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:

(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable;

supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler https://dibnet.dod.mil https://dibnet.dod.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 20 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial items.

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) (FAR)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)

52.213-4 TERMS AND CONDITIONS—SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL ITEMS) (JAN 2018) (FAR)

(c) FAR . This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR: https://www.acquisition.gov/?q=browsefar

DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html

DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES, ALT I (JUL 2014) (FAR) As prescribed in 22.1408(b), add the following as a preamble to the clause:

Notice: The following term(s) of this clause are waived for this contract: _______________ [List term(s)].

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) (FAR)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) (FAR)

52.243-1 CHANGES - FIXED PRICE (AUG 1987) (FAR)

52.246-2 INSPECTION OF SUPPLIES- FIXED PRICE (AUG 1996) (FAR)

52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) (FAR)

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (DFARS)

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) (DFARS)

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) (FAR)

https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2022_14.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 20 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(a) Definitions. As used in this provision–

“Commercial and Government Entity (CAGE) code” means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it has or does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code: ____________________

Immediate owner legal name: ______________________

(Do not use a “doing business as” name)

Is the immediate owner owned or controlled by another entity?: Yes or No.

(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code: ___________________

Highest-level owner legal name: ___________________ (Do not use a “doing business as” name)

(End of provision)

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2018) (FAR)

(a) The North American Industry classification System (NAICS) code for this acquisition is ___SEE SECTION A OF FORM SF18___ .

(2) The small business size standard is ___SEE SECTION A OF FORM SF18___.

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph

(d) of this provision instead of completing the corresponding individual representations and certification in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

[_] (i) Paragraph (d) applies.

[_] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

(c)(1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless --

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/FARTOCP13.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 20 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that --

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations --Representation.

(vii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(viii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(ix) 52.214-14, Place of Performance --Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(x) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xi) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

(xii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xiii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-25, Affirmative Action Compliance.This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xvi) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA -designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.

(xvii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA -designated items.

(xviii) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals -Representation. This provision applies to solicitation that include the clause at 52.204-7.

(xix) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.

(xx) 52.225-4, Buy American --Free Trade Agreements --Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225-3.

(A) If the acquisition value is less than $25,000, the basic provision applies.

(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.

(C) If the acquisition value is $50,000 or more but is less than $80,317, the provision with its Alternate II applies.

https://www.acquisition.gov/sites/default/file
s/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_214.html https://www.acquisition.gov/sites/default/files/current/far/html/52_215.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https
://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 20 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(D) If the acquisition value is $80,317 or more but is less than $100,000, the provision with its Alternate III applies.

(xxi) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.

(xxii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan --Certification. This provision applies to all solicitations.

(xxiii) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. This provision applies to all solicitations.

(xxiv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.

(2) The following representations or certifications are applicable as indicated by the Contracting Officer:

___ (i) 52.204-17, Ownership or Control of Offeror.

___ (ii) 52.204-20, Predecessor of Offeror.

___ (iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.

___ (iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.

___ (v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.

___ (vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA-Designated Products (Alternate I only).

___ (vii) 52.227-6, Royalty Information.

___ (A) Basic.

___ (B) Alternate I.

___ (viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.

(d) The offeror has completed the annual representations and certifications electronically via the SAM Web site accessed through https://www.

acquisition.gov . After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

FAR Clause # Title Date Change

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.

(End of Provision)

52.219-28 POST-AWARD SMALL BUSINESS PROGRAM RE-REPRESENTATION (JUL 2013) (FAR)

(a) Definitions. As used in this clause—

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is “not dominant in its field of operation” when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged. In determining whether dominance exists, consideration shall be given to all appropriate factors, including volume of business, number of employees, financial resources, competitive status or position, ownership or control of materials, processes, patents, license agreements, facilities, sales territory, and nature of business activity.

(b) If the Contractor represented that it was a small business concern prior to award of this contract, the Contractor shall rerepresent its size status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon the occurrence of any of the following:

https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html…