SPE4A718T574P.PDF
PDF 271 KB Posted
- Attached to
- DOOR, AIRCRAFT Federal contract opportunity
- Solicitation number
- SPE4A718T574P
- Issued by
- Defense Logistics Agency Aviation
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE
4. CERT.FOR NAT. DEF.
UNDER BDSA REG. 2
AND/OR DMS REG. 1
5. ISSUED BY
7. DELIVERY
9. DESTINATION
10. PLEASE FURNISH QUOTATIONS TO THE
ISSUING OFFICE IN BLOCK 5 ON OR
BEFORE CLOSE OF BUSINESS (Date)
IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.
11. SCHEDULE (See Continuation Sheets)
12. DISCOUNT FOR PROMPT PAYMENT
d. CALENDAR DAYS
NUMBER PERCENTAGE
NOTE: Additional provisions and representations are are not attached.
13. NAME AND ADDRESS OF QUOTER
a. NAME OF QUOTER
16. SIGNER
AUTHORIZED FOR LOCAL REPRODUCTION
Previous edition not useable
STANDARD FORM 18 (REV. 6-95)
Prescribed by GSA-FAR (48 CFR) 53.215-1(a)
1. REQUEST NO.
SPE4A7-18-T-574P
2. DATE ISSUED
2018 JUL 24
3. REQUISITION/PURCHASE REQUEST NO.
0075202764
RATING
DO-C9
DLA AVIATION
ASC SUPPLIER OPER AE AND AF DIV
8000 JEFFERSON DAVIS HWY
RICHMOND VA 23297
USA
Name: Mary Repole Buyer Code:GPD4510 Tel: 804-279-5413 Email: Mary.Repole@dla.mil
6. DELIVER BY (Date)
596 DAYS ADO
8. TO:
c. CITY
d. STATE
b. STREET ADDRESS
a. NAME OF CONSIGNEE
e. ZIP CODE
a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)
15. Date of Quotation
a. NAME (Type or Print)
AREA CODE
c. TITLE (Type or Print)d. CITY
c. COUNTY
b. STREET ADDRESS
e. STATE f. ZIP CODE
See Schedule
2018 JUL 31
NUMBER
FOB DESTINATION
OTHER
(See Schedule)
CAGE
b. TELEPHONE
PAGE OF PAGES
POC INFORMATION:
WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/
ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.
QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil
FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:
https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).
MASTER SOLICITATION
THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED
ACQUISITIONS REVISION 50 (JULY 9, 2018) WHICH CAN BE FOUND ON THE WEB AT:
http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master%20Solicitation%20Rev-50%20July-9-18.pdf?ver=2018-07-09-071953-083
This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:
http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.
14. SIGNATURE OF PERSON AUTHORIZED TO SIGN
QUOTATION
1 20
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 20 PAGES
SPE4A7-18-T-574P
CONTINUED ON NEXT PAGE
SECTION A
THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED
SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT
CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE
DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.
MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.
FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE
NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413 SEE http://www.sba.gov/content/table-small-business-size-standards
FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.
DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,
APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.
ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES
THE CONTRACTORS INSPECTION SYSTEM MUST COMPLY WITH ISO 9001:2015 OR
OTHER EQUIVALENT. IF QUOTING ‘OTHER EQUIVALENT’ SPECIFY WHAT ‘OTHER
EQUIVALENT’ STANDARD APPLIES.
Fast Pay does not apply to this solicitation
Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 20 PAGES
SECTION A
If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.
DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:
http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx
FAR 52.204-23, Products and Services Developed or Provided by Kaspersky
Lab and Other Covered Entities (Jul 2018), applies to all awards made on or after July 16, 2018.
Expedited delivery is encouraged for this item. In the instance that an automated evaluation is not used for this solicitation, Contracting
Officers may consider an evaluation preference for quotes/offers of fewer delivery days than the number of delivery days requested by the
Government. Therefore, suppliers are encouraged to submit their best possible delivery schedule.
Contractors shall not provide parts and supplies made using additive manufacturing (AM), unless AM is specifically authorized in the solicitation/contract. See procurement note L31.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION A
Procurement History for NSN/FSC:004479658/1560
CAGE Contract Number Quantity Unit Cost AWD Date
99115 SPE4A718PC398 6.000 34982.10000 20180705
0C7H8 SPE4A718PA670 7.000 35714.28000 20180521
0C7H8 SPE4A717C0184 8.000 26900.00000 20170302
0C7H8 SPE4A716M3376 2.000 38900.00000 20160107
0C7H8 SPE4A715MB357 3.000 33900.00000 20150923
29183 SPE4A715M4420P00001 5.000 21900.00000 20150211
4R2Y5 SPE4A714M4903P00001 6.000 9925.00000 20140130
91750 SPE4A714M3412P00001 4.000 12500.00000 20131213
29183 SPM4A712M0339P00001 8.000 6400.00000 20111101
99115 SP047002D0557005Z 8.000 2476.12000 20060426
99115 SP047002D0557004Z 8.000 2403.99000 20050428
99115 SP047002D0557003Z 8.000 2333.98000 20040419
99115 SP047002D0557002Z 32.000 2200.00000 20030420
92037 SP047002D56830002 17.000 275.30000 20020612
99115 SP047002D0557001Z 90.000 2200.00000 20020516
29183 SP046097M5906 23.000 2790.00000 19970711
61161 F3460189C1377 91.000 1745.00000 19890403
This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Trasnportation utilizing Government contracts and rates. If this acquisition is for Foreign Military Sales (FMS) FDT will not apply. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin. For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. The VSM site can be found at: https://vsm.distribution.dla.mil
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PR: 0075202764
NSN/MATERIAL:1560004479658
ITEM DESCRIPTION
DOOR,AIRCRAFT
DOOR,AIRCRAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR
SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND
NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-130N(1) DATED 16 NOV 2012.
IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
A BOEING RIGHTS GUARD LICENSE AGREEMENT 01 RESTRICTED TECHNICAL DATA
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION
CONDITIONS APPLY.
VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN
THE "01 BOEING RIGHTS GUARD" LICENSE AGREEMENT FOLDER AVAILABLE AT
https://pcf1x.bsm.dla.mil/cFolders
DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE
TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN
THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR
HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),
THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM
DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON
STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS
OF THE UNDIMENSIONED DRAWING.
THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR
DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE
DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE
INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND
(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)
0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH
DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO
WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.
REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED
TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.
THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO
EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND
ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH
JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF
STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL
AGREEMENTS.
TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL
TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB
ADDRESS:
https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx
OR BY WRITING TO:
DLA LOGISTICS INFORMATION SERVICE
FEDERAL CENTER
74 WASHINGTON AVE., NORTH
BATTLE CREEK, MI 49037-3084
TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A
CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,
DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY
THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN
EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF
GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.
NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE
REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT
OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE
EXPORT CONTROLLED TECHNICAL DATA.
NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO
THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA
UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY
PERMITTED BY DODD 5230.25.
EXCEPTION DATA:
1.,,Part marking per MIL-STD-130 method per drawing requirements and BAC
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
5307. Marking must include national stock number, part number, current design authority code (98748), actual manufacturer's CAGE code (-----), date of manufacture and "For Military Use Only". Parts will not be marked with the original design authority (Boeing) CAGE code.
2.,,Delete reference to BAC 5005, D2-5000.
3.,,Surface texture per ASME B46.1.
4.,,Dimensions and tolerances per ASME Y14.5M.
5.,,Omit fastener and pilot holes not required for assembly of 5-89321-56.
6.,,IUID marking is not required.
7.,,Engineering Orders (EO) 99C0296, 99C0297, and 99C0298 apply to drawing 5-89321.
8.,,Use BAC 5514-5101 in lieu of BAC 5514-580.
9.,,Use MS 20257 in lieu of AN 257.
10.,,Use NASM21042L3 in lieu of BACN10BY-53W
11.,,Use BACN10RB3 in lieu of BACN10A-02.
12.,, Structural bonding shall be performed by an approved source from the current OC-ALC Approved Sources for structural Bonding C/KC-135 Assemblies.
13.,,Use bare aluminum per SAE AMS-QQ-A-250/4 in lieu of clad aluminum per QQ-A-362.
14.,,Phosphoric acid anodize per BAC 5555, optional to use SAE APRP 1524.
15.,,Reference flag note 22 on drawing 5-89321. Delete reference to BMS 4-3A. Fabricate per BAC 5514-580 and D6-44879.
16. Finish code F2.115 defined; Chemical treat to meet the requirements of MIL-DTL-5541, class 1A or anodize to meet the requirements of MIL-A-8625, Type I or Type IC (preferred), Cl 1. Apply MIL-PRF-23377, type I to a dry film thickness in accordance with the manufacturer's application instructions and MIL-F-18264.
17. Finish code F2.30 defined; Chemical treat to meet the requirements of MIL-DTL-5541, Class 1A or anodize to meet the requirements of MIL-A-8625, Type I or Type IC (preferred), Cl 1. Apply MIL-PRF-23377, type I to a minimum dry film thickness per MIL-F-18264 and the manufactures application instructions.
18. Finish code F2.10 defined; Apply no finish, except that temporary protection may be applied for transportation, handling and storage.
19. Reference flag note 501 on drawing 5-89321. Delete reference to BMS 4-3A. Use BMS 4-4, type 6-10.
20. Finish code F1.20 defined; Cadmium-titanium alloy plate parts heat-treated from 220 ksi to 240 ksi in accordance with MIL-STD-1500.
Cadmium plate parts heat treated below 220 ksi and springs (regardless of heat-treat) in accordance with the following:
a. Threaded parts to meet the requirements of AMS-QQ-P-416, Type I, Class 2.
b. Nonthreaded parts to meet the requirements of AMS-QQ-P-416, Type II, Class 2.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
c. Springs to meet the requirements of AMS-QQ-P-416, Type II, Class 2 and bake 8 hours minimum at 375 +/- 25 F after plating. Do not flex springs prior to baking.
21. Finish code F12.62 defined; Apply one coat of A-A-3164 (FED-STD-595 Color No. 36251) in accordance with MIL-F-18264.
IAW BASIC DRAWING NR 81205 5-89321
REVISION NR P DTD 05/09/1977
PART PIECE NUMBER: 5-89321-56
IAW REFERENCE DRAWING NR 81205 BAC5010
REVISION NR Y DTD 06/30/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5514
REVISION NR AP DTD 05/01/1995
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5514
REVISION NR AP DTD 09/10/1999
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5514-5101
REVISION NR V DTD 05/30/2000
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5514-5101
REVISION NR V DTD 04/15/1999
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5555
REVISION NR T DTD 02/16/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5602
REVISION NR AF DTD 04/12/2002
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 82918 3-99498
REVISION NR DTD 04/30/1955
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS4-4Y
REVISION NR Y DTD 05/07/2010
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS4-4Y
REVISION NR B DTD 06/04/2012
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5555
REVISION NR T DTD 04/20/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5602
REVISION NR AF DTD 08/28/2001
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BACS18P
REVISION NR U DTD 02/18/2005
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 3-96450
REVISION NR B DTD 02/22/1961
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS5-101M
REVISION NR M DTD 05/29/2008
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5514-589
REVISION NR Y DTD 08/03/2001
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5514-589
REVISION NR Y DTD 11/03/2004
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BACL10J
REVISION NR B DTD 12/11/1999
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 82918 5-89321/2
REVISION NR G DTD 05/09/1977
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 5-89321
REVISION NR P DTD 09/30/1999
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC1493
REVISION NR CE DTD 04/24/2000
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS5-89T
REVISION NR T DTD 05/06/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS5-89T
REVISION NR DTD 05/06/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5307
REVISION NR U DTD 11/27/2013
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5300-1
REVISION NR H DTD 09/01/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5300-2
REVISION NR H DTD 09/01/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 3-99498/1
REVISION NR DTD 01/01/1939
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC1493-463
REVISION NR CB DTD 07/20/1992
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5117
REVISION NR AE DTD 07/20/2011
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 13873 008641972-14202
REVISION NR A DTD 10/12/2016
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5300-2
REVISION NR H DTD 09/15/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5300-1
REVISION NR H DTD 06/23/2014
PART PIECE NUMBER:
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
IAW REFERENCE DRAWING NR 81205 BAC5010
REVISION NR Y DTD 01/29/2016
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5018
REVISION NR M DTD 03/31/2016
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS5-101M
REVISION NR C DTD 09/18/2014
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 D6-44879
REVISION NR D DTD 04/08/2008
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5300
REVISION NR N DTD 12/05/2016
PART PIECE NUMBER:
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .
0001 0075202764 0001 EA 5.000
NSN/MATERIAL:1560004479658
DELIVERY (IN DAYS):0596
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS
MATERIALS PACKAGING REQUIREMENTS.
PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS
SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,
TITLE 49 CODE OF FEDERAL REGULATIONS,
INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)
TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4
OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME
DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG
COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS
ON TRANSPORT OF DANGEROUS GOODS. WHEN A);
CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES
SHIPMENT THROUGH A MILITARY AERIAL PORT FOR
TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL
COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS
MATERIALS FOR MILITARY AIR SHIPMENT.
LABELING AND MARKING: ALL INTERIOR AND EXTERIOR
CONTAINERS SHALL BE LABELED AND MARKED AS
SPECIFIED IN THE REFERENCED PRODUCT
SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D
OF THE CONTRACT OR ORDER. IN ADDITION, ALL
LABELING AND MARKING SHALL COMPLY WITH THE
REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,
AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,
IMDG ANNEX 1, AND/OR DLAI 4145.3.
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 20 PAGES
CONTINUED ON NEXT PAGE
SECTION B
PR: 0075202764 PRLI: 0001 CONT’D
CERTIFICATION: ALL PACKAGING PERFORMANCE TEST
REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES
AND REPORTS ATTESTING TO DATE OF TESTING AND
DATA RESULTS OBTAINED FROM TESTING. THE
CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE
CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,
ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,
SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL
INSPECTION AND RECEIVING REPORT), OR ANY
SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL
CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR
INSPECTION BY AUTHORIZED U. S. GOVERNMENT
REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3
YEARS FROM THE DATE OF SHIPMENT.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,
IN ACCORDANCE WITH FED-STD-313, THE MATERIAL
SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH "ASTM D3951."
Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:
•,,All Section “D” Packaging and Marking Clauses take precedence over
ASTM D3951.
•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.
•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS
SEE DLAD PROC NOTE C20 AND
CONTRACT INSTRUCTIONS.
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:03/19/2020 Original Required Delivery Date:04/14/2020
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 20 PAGES
SECTION F - DELIVERIES OR PERFORMANCE
52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)
SECTION I - CONTRACT CLAUSES
252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)
252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEPT 2013) (DFARS)
252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)
252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT
INFORMATION (OCT 2016) (DFARS)
252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) (DFARS)
252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016)
(DFARS)
252.225-7007 PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY
COMPANIES (SEP 2006) DFARS (JUN 2018) (DFARS)
252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)
252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (DFARS)
252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (DFARS)
(a) Definitions. As used in this clause—
“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.
“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.
(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) WAWF access. To access WAWF, the Contractor shall—
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/
(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.
(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.acquisition.gov https://wawf.eb.mil/ https://wawf.eb.mil/
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 20 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
CONTINUED ON NEXT PAGE
WAWF for this contract/order:
(1) Document type. The Contractor shall use the following document type(s).
*** When creating documents in Wide Area Workflow, both an invoice and receiving report are required for origin inspection awards or awards shipping to a DLA depot for stock regardless of inspection point (see clause 252.246-7000 for additional information regarding receiving reports). For awards requiring both a receiving report and invoice, a combo type document may be used. For awards in accordance with fast payment procedures, only create an invoice and check the Fast Payment Procedure in Wide Area Workflow. See clause 252.232-7006 for further Wide Area Workflow information. For service contracts, a two-in-one invoice is required. (DoDAAC information should be completed.)***
Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)
(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.
____________________ *** SEE AWARD ***____________________
(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in
WAWF
Pay Official DoDAAC See Resulting Award- Block 14 of 1155
Issue By DoDAAC See Block 5 of Form SF18
Admin DoDAAC See Resulting Award- Block 7 of Form 1155
Inspect By DoDAAC If at Origin- see Admin DODAAC, if at Dest- see
Ship to Ship To Code See Schedule in Section B of Form 1155 Ship From Code TBD
Mark For Code N/A
Service Approver (DoDAAC)
N/A
Service Acceptor (DoDAAC)
N/A
Accept at Other DoDAAC N/A
LPO DoDAAC N/A
DCAA Auditor DoDAAC N/A
Other DoDAAC(s) N/A
(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 20 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
CONTINUED ON NEXT PAGE
and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.
(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.
____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.
____________________*** SEE BLOCK 24 OF FORM 1155 *** ____________________
(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.
(End of clause)
252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)
252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)
252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) (DFARS)
252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) (DFARS)
52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017) (FAR)
52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) (FAR)
52.204–23 PROHIBITION ON CONTRACTING FOR HARDWARE, SOFTWARE, AND SERVICES DEVELOPED OR PROVIDED BY
KASPERSKY LAB AND OTHER COVERED ENTITIES (JUL 2018) FAR (JUL 2018) (FAR)
As prescribed in 4.2004, insert the following clause:
(a) Definitions. As used in this clause --
Covered article means any hardware, software, or service that --
(1) Is developed or provided by a covered entity;
(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or
(3) Contains components using any hardware or software developed in whole or in part by a covered entity.
Covered entity means --
(1) Kaspersky Lab;
(2) Any successor entity to Kaspersky Lab;
(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or
(4) Any entity of which Kaspersky Lab has a majority ownership.
(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits Government use of any covered article. The Contractor is prohibited from --
(1) Providing any covered article that the Government will use on or after October 1, 2018; and
(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.
(c) Reporting requirement. (1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil.
(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:
(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable;
supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler https://dibnet.dod.mil https://dibnet.dod.mil
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 20 PAGES
SECTION I - CONTRACT CLAUSES (CONTINUED)
CONTINUED ON NEXT PAGE
number); item description; and any readily available information about mitigation actions undertaken or recommended.
(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.
(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial items.
52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) (FAR)
52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)
52.213-4 TERMS AND CONDITIONS—SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL ITEMS) (JAN 2018) (FAR)
(c) FAR . This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):
FAR: https://www.acquisition.gov/?q=browsefar
DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
DLAD: http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx
52.222-36 EQUAL OPPORTUNITY FOR WORKERS WITH DISABILITIES, ALT I (JUL 2014) (FAR) As prescribed in 22.1408(b), add the following as a preamble to the clause:
Notice: The following term(s) of this clause are waived for this contract: _______________ [List term(s)].
52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) (FAR)
52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) (FAR)
52.243-1 CHANGES - FIXED PRICE (AUG 1987) (FAR)
52.246-2 INSPECTION OF SUPPLIES- FIXED PRICE (AUG 1996) (FAR)
52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) (FAR)
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS
252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (DFARS)
252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) (DFARS)
52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) (FAR)
https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2022_14.html
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 20 PAGES
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)
CONTINUED ON NEXT PAGE
(a) Definitions. As used in this provision–
“Commercial and Government Entity (CAGE) code” means–
(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or
(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.
“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.
“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.
(b) The Offeror represents that it has or does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.
(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:
Immediate owner CAGE code: ____________________
Immediate owner legal name: ______________________
(Do not use a “doing business as” name)
Is the immediate owner owned or controlled by another entity?: Yes or No.
(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:
Highest-level owner CAGE code: ___________________
Highest-level owner legal name: ___________________ (Do not use a “doing business as” name)
(End of provision)
52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2018) (FAR)
(a) The North American Industry classification System (NAICS) code for this acquisition is ___SEE SECTION A OF FORM SF18___ .
(2) The small business size standard is ___SEE SECTION A OF FORM SF18___.
(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.
(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.
(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph
(d) of this provision instead of completing the corresponding individual representations and certification in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:
[_] (i) Paragraph (d) applies.
[_] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.
(c)(1) The following representations or certifications in SAM are applicable to this solicitation as indicated:
(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless --
(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;
(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures; or https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/FARTOCP13.html
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 20 PAGES
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)
CONTINUED ON NEXT PAGE
(C) The solicitation is for utility services for which rates are set by law or regulation.
(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.
(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements- Representation. This provision applies to all solicitations.
(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.
(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that --
(A) Are not set aside for small business concerns;
(B) Exceed the simplified acquisition threshold; and
(C) Are for contracts that will be performed in the United States or its outlying areas.
(vi) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations --Representation.
(vii) 52.209-5, Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.
(viii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.
(ix) 52.214-14, Place of Performance --Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.
(x) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.
(xi) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.
(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.
(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.
(xii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.
(xiii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.
(xiv) 52.222-25, Affirmative Action Compliance.This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.
(xv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.
(xvi) 52.223-1, Biobased Product Certification. This provision applies to solicitations that require the delivery or specify the use of USDA -designated items; or include the clause at 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts.
(xvii) 52.223-4, Recovered Material Certification. This provision applies to solicitations that are for, or specify the use of, EPA -designated items.
(xviii) 52.223-22, Public Disclosure of Greenhouse Gas Emissions and Reduction Goals -Representation. This provision applies to solicitation that include the clause at 52.204-7.
(xix) 52.225-2, Buy American Certificate. This provision applies to solicitations containing the clause at 52.225-1.
(xx) 52.225-4, Buy American --Free Trade Agreements --Israeli Trade Act Certificate. (Basic, Alternates I, II, and III.) This provision applies to solicitations containing the clause at 52.225-3.
(A) If the acquisition value is less than $25,000, the basic provision applies.
(B) If the acquisition value is $25,000 or more but is less than $50,000, the provision with its Alternate I applies.
(C) If the acquisition value is $50,000 or more but is less than $80,317, the provision with its Alternate II applies.
https://www.acquisition.gov/sites/default/file
s/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_207_211.html https://www.acquisition.gov/sites/default/files/current/far/html/52_214.html https://www.acquisition.gov/sites/default/files/current/far/html/52_215.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_217_221.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_222.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_200_206.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https
://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html https://www.acquisition.gov/sites/default/files/current/far/html/52_223_226.html
CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 20 PAGES
SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)
CONTINUED ON NEXT PAGE
(D) If the acquisition value is $80,317 or more but is less than $100,000, the provision with its Alternate III applies.
(xxi) 52.225-6, Trade Agreements Certificate. This provision applies to solicitations containing the clause at 52.225-5.
(xxii) 52.225-20, Prohibition on Conducting Restricted Business Operations in Sudan --Certification. This provision applies to all solicitations.
(xxiii) 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or Transactions Relating to Iran-Representation and Certifications. This provision applies to all solicitations.
(xxiv) 52.226-2, Historically Black College or University and Minority Institution Representation. This provision applies to solicitations for research, studies, supplies, or services of the type normally acquired from higher educational institutions.
(2) The following representations or certifications are applicable as indicated by the Contracting Officer:
___ (i) 52.204-17, Ownership or Control of Offeror.
___ (ii) 52.204-20, Predecessor of Offeror.
___ (iii) 52.222-18, Certification Regarding Knowledge of Child Labor for Listed End Products.
___ (iv) 52.222-48, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Certification.
___ (v) 52.222-52 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Certification.
___ (vi) 52.223-9, with its Alternate I, Estimate of Percentage of Recovered Material Content for EPA-Designated Products (Alternate I only).
___ (vii) 52.227-6, Royalty Information.
___ (A) Basic.
___ (B) Alternate I.
___ (viii) 52.227-15, Representation of Limited Rights Data and Restricted Computer Software.
(d) The offeror has completed the annual representations and certifications electronically via the SAM Web site accessed through https://www.
acquisition.gov . After reviewing the SAM database information, the offeror verifies by submission of the offer that the representations and certifications currently posted electronically that apply to this solicitation as indicated in paragraph (c) of this provision have been entered or updated within the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201); except for the changes identified below [offeror to insert changes, identifying change by clause number, title, date]. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.
FAR Clause # Title Date Change
Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on SAM.
(End of Provision)
52.219-28 POST-AWARD SMALL BUSINESS PROGRAM RE-REPRESENTATION (JUL 2013) (FAR)
(a) Definitions. As used in this clause—
Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.
Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause. Such a concern is “not dominant in its field of operation” when it does not exercise a controlling or major influence on a national basis in a kind of business activity in which a number of business concerns are primarily engaged.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.