SPE4A718T218X.PDF

PDF 103 KB Posted

Attached to
TANK, HYDRAULIC FLUI Federal contract opportunity
Solicitation number
SPE4A718T218X
Issued by
Defense Logistics Agency Aviation

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

SPE4A7-18-T-218X

1. REQUEST NO.

2018 APR 05

2. DATE ISSUED

0073311227

3. REQUISITION/PURCHASE REQUEST NO.

DO-C9

RATING

DLA AVIATION

ASC SUPPLIER OPER AE AND AF DIV

8000 JEFFERSON DAVIS HWY

RICHMOND VA 23297

USA

Name: THUY HO Buyer Code:PARFV56 Tel: 804-279-6092 Email: THUY.HO@dla.mil

143 DAYS ADO

6. DELIVER BY (Date)

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 APR 12

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED

ACQUISITIONS REVISION 46 (FEBRURARY 7, 2018) WHICH CAN BE FOUND ON THE WEB AT:

http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master%20Solicitation%20Rev-46%20February-7-2018.pdf?ver=2018-02-08-063754-70

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 29

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 29 PAGES

SPE4A7-18-T-218X

CONTINUED ON NEXT PAGE

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413 SEE http://www.sba.gov/content/table-small-business-size-standards

FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

Fast Pay does not apply to this solicitation

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break informationsubmitted with the offeror's original quotation without further solicitation or discussion.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a laterdate. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 29 PAGES

SECTION A

DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:

http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx

Procurement History for NSN/FSC:008983533/1650

CAGE Contract Number Quantity Unit Cost AWD Date

29183 SPE4A717P6517P00001 4.000 31500.00000 20170302

29183 SPE4A715M0266P00001 2.000 31900.00000 20141008

29183 SPE4A614MJ965P00001 2.000 32000.00000 20140819

29183 SPM4A710C0718P00002 24.000 21900.00000 20100916

29183 SPM4A709C0646P00011 8.000 21900.00000 20090927

55345 SP041102ME301 1.000 3500.00000 20011018

97619 F3460183D0720000100 6.000 4554.00000 19830411

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Trasnportation utilizing Government contracts and rates. If this acquisition is for Foreign Military Sales (FMS) FDT will not apply. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin.

For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at:

http://www.dla.mil/FDTPI/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0073311227

NSN/MATERIAL:1650008983533

ITEM DESCRIPTION

TANK,HYDRAULIC FLUI

TANK,HYDRAULIC FLUID

DWG: 25-6267, DASH -506; ENGR NOTES: 1-25,58,59,60,61

DWG: 6240, VENDER DRAWING, USE NSN 1650006083185

DWG: 30-1421, ENGR NOTES: 1-4, 26,27

DWG: 23-2627, DASH -1; ENGR NOTES: 1-4

DWG: 33-1141, ENGR NOTES: 1-4,28, 29, 30,31<(>,<)>

DWG: 23-2746, ENGR NOTES: 1-4, 32,33

DWG: 25-6270, DASH -502; ENGR NOTES: 1-4, 6, 20, 21, 34,35

DWG: 23-2570, ENGR NOTES: 1-4, 31,36

DWG: 39-2967, DASH -1; ENGR NOTES: 1-4, 31,37

DWG: 39-2960, DASH -1; ENGR NOTES: 1-4, 31,37

DWG: 29-6086, ENGR NOTES: 1-4, 28,29,31

DWG: 39-2951, ENGR NOTES: 1-4, 31

DWG: 23-2652, ENGR NOTES: 1-4,28,31

DWG: 25-6480, DASH -1; ENGR NOTES: 1-4, 31,36

DWG: 29-5891, ENGR NOTES: 1-4, 31,36,38

DWG: 25-6269 SHT 1, DASH -502; ENGR NOTES: 1-4

DWG: 29-5970, ENGR NOTES: 1-4, 31,36,38

DWG: 25-6271 SHT 1, ENGR NOTES: 1-4,6,20,31,35,36,37

DWG: 29-6229, DASH -501; ENGR NOTES: 1-4,31,36,61

DWG: 29-5821, ENGR NOTES: 1-4,6,20

DWG: 26-3555, ENGR NOTES: 1-4,31,39

DWG: 36-1862, ENGR NOTES: 1-4, 31,40,41

DWG: 25-6488, DASH -1; ENGR NOTES: 1-4, 6, 21, 22, 31,35,42

DWG: 26-3269, ENGR NOTES: 1-4, 31,41

DWG: 26-3248, ENGR NOTES: 1-4, 31,40,41

DWG: 29-5768, ENGR NOTES: 1-4, 6, 22, 31,35,42

DWG: 39-2894, ENGR NOTES: 1-4, 31,39

DWG: 23-2656, ENGR NOTES: 1-4, 31,41

DWG: 39-2897, ENGR NOTES: 1-4, 31,41

DWG: 29-5871, ENGR NOTES: 1-4, 31,40,41

DWG: 25-6317, ENGR NOTES: 1-4,22,31,43, 44

DWG: 26-3913, DASH -501; ENGR NOTES: 1-4, 31,36

DWG: 23-2798, DASH -501; ENGR NOTES: 1-4, 31,36

DWG: 29-5767, ENGR NOTES: 1-4, 31,41

DWG: 25-6770 SHT 1, DASH -6; ENGR NOTES: 1-5,38,39,37,45,46,47,48,49

DWG: 23-3866, DASH & -1: ENGR NOTES: 1-5, 50,51

DWG: 26-3734, DASH -1; ENGR NOTES: 1-5, 51, 52

DWG: 36-1868, DASH -501; ENGR NOTES:1-4, 53

DWG: 36-1867, ENGR NOTES: 1-4, 51, 54

DWG: 36-1878, ENGR NOTES: 1-4

DWG: 36-1877, ENGR NOTES: 1-4, 51, 54

DWG: 9-67607, ENGR NOTES: 1-4, 55,56,57

DWG: D-13046, 58

DWG: 06-14058, 57

BACB30CP, -6-4

BACCIODA, 2-930

BACCLOQ, -12-300

BACC19B, -0

BACF22M, -88 OR -8C

BACM1OA SHT 1, -20-16BG

BACMLOL, -22-1BUU

BACMLOM, -20-LCR

BAC MLOP<(>,,<)> DASH -22-6EA

BACMLOR, -61-12AS ENGR NOTE:45

BACMLOS, -20-14AV AND -20-14AZ

BACR15AY, -6-4

BAC5401, 50

BMS1-11, 47

EXCEPTIONS DATA:

1. UID PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS

AND BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

SERIAL NUMBER FOR EACH ASSEMBLY IS REQUIRED.

2. DELETE REFERENCE TO 2-5000 OR D2-5000 AND BAC 5005.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

3. DIMENSIONS AND TOLERANCES PER ASME Y14.5M IN LIEU OF MIL-STD-8 / ANSI

Y14.5.

4. SURFACE TEXTURE PER ASME B46.1 IN LIEU OF BACD 2097.

5. FINISH CODE F-2.115 / F-2.30 DEFINED: CHEMICAL TREAT ACCORDING TO

MIL-DTL-5541, CLASS 1A OR ANODIZE ACCORDING TO MIL-A-8625, TYPE I OR IC

(PREFERRED), CLASS 1. APPLY MIL-PRF-23377, TYPE I,CLASS C2 PRIMER TO A

DRY FILM THICKNESS OF 0.0003 TO 0.0005 INCH ACCORDING TO THE

MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264.

6. USE AWS A5.10 FOR ALUMINUM ALLOY FILLER MATERIAL IN LIEU OF QQ-R-566.

7. USE MS24665 COTTER PINS PER AIA/NAS NASM24665 IN LIEU OF AN380 AND/OR

AN381. SEE TABLE VIII FOR PART NUMBER CONVERSION.

8. USE MS20392-2C37 FLAT HEAD PIN PER AIA/NAS NASM20392 IN LIEU OF

AN393-37.

9. USE MS20392-4C25 FLAT HEAD PIN PER AIA/NAS NASM20392 IN LIEU OF

AN395-25.

10. USE MS28775 PER SAE AS28775 IN LIEU OF AN6227 AND AN6230.

11. USE MS28778-8 PER SAE AS28778 IN LIEU OF AN6290-8.

12. USE MS20995-C32SAFETY WIRE PER AIA/NAS NASM 20995 AND IN LIEU OF

AN995-C32.

13. USE MS20995-N32SAFETY WIRE PER AIA/NAS NASM 20995 AND IN LIEU OF

AN995-N32.

14. USE MS20995-F32 SAFETY WIRE PER AIA/NAS NASM 20995 AND IN LIEU OF

AN995-F32.

15. USE MS20995-NC32 SAFETY WIRE PER AIA/NAS NASM 20995 AND IN LIEU OF

AN995-NC32.

16. USE SAFETY WIRING AND COTTER PIN INSTALLATION PER AIA/NAS NASM33540

IN LIEU OF BAC 5018 AND/OR MS33540.

17. USE NAS43HT3-50 PER AIA/NAS NAS43 IN LIEU OF NAS43-3-50.

18. USE MS16625-1-175 IN LIEU OF NAS50-175.

19. USE A-A-3164 CAMOUFLAGE LAQUER COLOR 37038 PER FED STD 595 IN LIEU

OF MIL-L-6805 COLOR 3725.

20. USE BAC 5975 CLASS B INLIEU OF BAC5921, BAC 5932 AND BAC 5935 CLASS

B.

21. OPTIONAL TO RADIOGRAPHIC INSPECT PER ASTM E1742 IN LIEU OF BAC 5915.

22. USE MIL-PRF-6083 AND QPL 6083 IN LIEU OF MIL-O-6083.

23. FLAGNOTE 7 MAXIMUM OF 4 WELD REWORK IN LIEU OF 2 WELD REWORK PER BAC

5975.

24. USE AIA/NAS NAS1455 CHAIN IN LIEU OF BAC C19A.

25. USE ALLEN AIRCRAFT PRODUCTS P/N 7402101 IN LIEU OF LISLE P/N 732FJ

AND BACP21L-8.

26. USE STEEL WIRE PER ASTM A228/A228M IN LIEU OF MIL-W-6101.

27. FINISH CODE F-1.20 DEFINED: CADMIUM PLATE PARTS TO MEET THE

REQUIREMENTS OF SAE AMS-QQ-P-416, TYPE II, CLASS 2.

28. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/5 ALUMINUM ALLOY ALCLAD

2024 PLATE/SHEET IN LIEU OF QQ-A-362.

29. HEAT TREAT ALUMINUM ALLOY PER SAE AMS 2770 AND SAE AMS 2772 IN LIEU

OF BAC5602 AND MIL-H-6088.

30. HEAT TREAT ALUMINUM ALLOY 2024 PLATE/SHEET TO T42 TEMPER IN LIEU OF

T4.

31. FINISH CODE F-2.10 DEFINED: APPLY NO FINISH, EXCEPT THAT TEMPORARY

PROTECTION MAY BE APPLIED FOR TRANSPORTATION, HANDLING, AND STORAGE.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

32. USE SAE AMS-C-6183 IN LIEU OF BMS 1-3.

33. FINISH CODE F-7.10 DEFINED: APPLY NO FINISH.

34. BB352-6-4 IS SOURCE DIRECTED TO THE MANUFACTURER LISTED ON DWG

25-6270 FLAGNOTE 3.

35. RADIOGRAPHIC INSPECT WELD PER ASTM E1742 OR BAC 5915 IN LIEU OF

MIL-I-6865 OR MIL-C-6021. ACCEPT/REJECT CRITERIA PER BAC 5975.

36. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/8 ALUMINUM ALLOY 5052

PLATE/SHEET IN LIEU OF QQ-A-318.

37. SPOT AND SEAM WELD PER BAC 5977 (OPTIONAL AWS D17.2) IN LIEU OF BAC

5003.

38. USE SAE AMS 4025 ALUMINUM ALLOY 6061 PLATE/SHEET IN LIEU OF

QQ-A-327.

39. USE SAE AMS-WW-T-700 AND SAE AMS-WW-T-700/4 ALUMINUM ALLOY TUBING

5052 IN LIEU OF WW-T-787.

40. USE SAE AMS-WW-T-700 AND SAE AMS-WW-T-700/6 ALUMINUM ALLOY TUBING

6061 IN LIEU OF WW-T-789.

41. USE SAE AMS-QQ-A-225 AND SAE AMS-QQ-A-225/8 ALUMINUM ALLOY 6061 IN

LIEU OF QQ-A-325.

42. USE SAE AS4330 STANDARD DIMENSIONS FOR TUBING END FLARE IN LIEU OF

AND10061.

43. USE ALUMINUM ALLOY PERMANENT MOLD CASTING PER ASTM B108 IN LIEU OF

QQ-A-596.

44. DELETE RAISED WORD "BOEING" FROM CASTING /FORGING.

45. USE BAC R15AY RIVETS IN LIEU OF BAC R15BJ.

46. USE NAS 528A6 COLLAR PER AIA/NAS NAS528 IN LIEU OF BAC C30C-6.

47. USE MS21075 OR MS21076 NUT PLATE PER AIA/NAS NASM21075 OR NASM21076

IN LIEU OF BAC N10FM.

48. USE MS20426_( ) COUNTERSUNK RIVETS PER AIA/NAS NASM20426 IN LIEU OF

AN426.

49. REFERENCE DRAWING 25-6770: OMIT REFERENCE TO .250/.261 DIAMETER

HOLES. HOLES ARE TO BE DRILLED ON INSTALLATION, (BAG AND TAG HARDWARE).

50. USE SAE AMS 10134-2005 EXTRUDED ALUMINUM ANGLE IN LIEU OF

AND10134-2005.

51. USE SAE AMS-QQ-A-200 AND SAE AMS-QQ-A-200/3 EXTRUDED ALUMINUM ALLOY

2024 BAR, ROD, SHAPES TUBE AND WIRE IN LIEU OF QQ-A-267.

52. USE SAE AMS 10136-1702 EXTRUDED ALUMINUM TEE IN LIEU OF

AND10136-1702.

53. MATERIAL TO BE SOURCE DIRECTED TO THE MANUFACTURERS LISTED ON

DRAWING 36-1868 EO 2009C0012.

54. FINISH CODE F-2.20 DEFINED: ANODIZE ACCORDING TO MIL-A-8625, TYPE I

OR IC (PREFERRED), CLASS 1.

55. USE SAE AMS-QQ-A-225 AND SAE AMS-QQ-A-225/6 ALUMINUM ALLOY 2024 T-4

BAR, IN LIEU OF QQ-A-268.

56. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/4 ALUMINUM ALLOY 2024

PLATE/SHEET IN LIEU OF QQ-A-355.

57. FINISH CODE F-2.22 DEFINED: CHEMICAL TREAT ACCORDING TO

MIL-DTL-5541, CLASS 1A OR ANODIZE ACCORDING TO MIL-A-8625, TYPE I OR IC

(PREFERRED), CLASS 1.

58. REPLACE "MIL-0-5606" WITH MIL-PRF-87257" ON METAL CAL.

59. USE WASHER NAS1149D0516H IN LIEU OF AN960-D516L

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

60. USE WASHER NAS1149D0363H IN LIEU OF AND960-D10

61. WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE

TO THIS PRODUCT ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: AN ITEM, WHICH REQUIRES SPECIAL

MANUFACTURING PROCESSES, CONTROLS, AND TESTING OF MATERIAL OR END ITEMS.

BECAUSE OF ITS USE OR APPLICATION, FAILURE TO MAINTAIN THE HIGHEST

RELIABILITY OF SUCH AN ITEM COULD BE CATASTROPHIC RESULTING IN LOSS OF

LIFE OR SERIOUS INJURY, LOSS OF A WEAPON SYSTEM OR EXTENSIVE SECONDARY

DAMAGE, WITH DIRECT IMPACT ON THE CAPABILITY TO RESPOND TO A NATIONAL

EMERGENCY OR TO ACHIEVE WARTIME SUSTAINABILITY.

(B) CRITICAL CHARACTERISTICS: CHARACTERISTICS WHICH, WHEN DEFECTIVE, ARE

LIKELY TO RESULT IN HAZARDOUS OR UNSAFE CONDITIONS FOR INDIVIDUALS

USING, MAINTAINING OR DEPENDING UPON THE PRODUCT; OR, ARE LIKELY TO

PREVENT PERFORMANCE OF THE TACTICAL FUNCTION OF A MAJOR END ITEM SUCH AS

AN AIRCRAFT, MISSILE, SPACE VEHICLE, ENGINE OR A MAJOR PART THEREOF.

(DERIVED FROM MIL-STD-1916).

(C) MAJOR CHARACTERISTICS: CHARACTERISTICS (OTHER THAN CRITICAL OR

MINOR) WHICH, WHEN DEFECTIVE, ARE LIKELY TO RESULT IN FAILURE OR TO

REDUCE THE USABILITY OF THE PRODUCT OR A MAJOR END ITEM FOR ITS INTENDED

PURPOSE. (DERIVED FROM MIL-STD-1916).

(D) MINOR CHARACTERISTICS: ALL CHARACTERISTICS NOT DESIGNATED AS

CRITICAL OR MAJOR BUT FOR WHICH FULL CONFORMITY IS REQUIRED.

(E) COMPLEX: ITEMS HAVING QUALITY CHARACTERISTICS NOT WHOLLY VISIBLE

(HIDDEN CHARACTERISTICS), IN THE END PRODUCT FOR WHICH CONTRACTUAL

CONFORMANCE MUST BE ESTABLISHED PROGRESSIVELY THROUGH PRECISE

MEASUREMENTS, TESTS OR CONTROLS APPLIED DURING PURCHASING,

MANUFACTURING, PERFORMANCE, ASSEMBLY AND FUNCTIONAL OPERATION EITHER AS

AN INDIVIDUAL ITEM OR IN CONJUNCTION WITH OTHER ITEMS [FAR SUBPART

46.203(B)].

(F) COMMERCIAL: DESCRIBED IN COMMERCIAL CATALOGS, DRAWINGS OR INDUSTRIAL

STANDARDS [FAR SUBPART 46.203(A), (1)].

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW):

( ) ENGINEERING CRITICAL IN APPLICATION

( ) CRITICAL CHARACTERISTICS

( ) MAJOR CHARACTERISTICS

( ) MINOR CHARACTERISTICS, ALL EXCEPTING CRITICAL AND MAJOR

(X ) COMPLEX

( ) AVAILABLE AS A COMMERCIAL PRODUCT

WHEN MATERIALS, PROCESSES OR COMPONENTS ARE TO BE OBTAINED FROM DIRECTED

SOURCES AS INDICATED HEREIN OR IN THE SPECIFICATIONS, ALTERNATE SOURCES

MAY ONLY BE UTILIZED UPON PRIOR APPROVAL BY THE CONTRACTING OFFICER OF

THIS PROCURING ACTIVITY AS A DEVIATION.

BIDDERS SHALL NOTIFY THIS PROCURING ACTIVITY AT THE TIME OF QUOTATION OF

ANY DRAWING, SPECIFICATION OR STANDARD WHICH IS OF MORE CURRENT DATA

REVISION THAN THOSE SHOWN ON THE DATA LISTING OR IN THESE ENGINEERING

NOTES. DETERMINATION OF ACCEPTABILITY OF THE MORE CURRENTLY DATED DATA

WILL BE MADE BY THE RESPONSIBLE ENGINEERING OFFICE OF THIS PROCURING

ACTIVITY.

LOWER TIER SPECIFICATIONS LISTED IN OR REFERENCED BY FIRST TIER

SPECIFICATIONS MAY NOT BE SHOWN ON THE DATA LISTS OR ENGINEERING NOTES

ACCOMPANYING THIS CONTRACT BUT ARE NONETHELESS REQUIRED BY THIS CONTRACT

FOR COMPLIANCE. EXCEPTIONS WOULD OCCUR ONLY WHEN SUCH LOWER TIER

REQUIREMENTS HAVE BEEN SPECIFICALLY WAIVED OR SUBSTITUTE

SPECIFICATIONS/REQUIREMENTS ARE DESIGNATED HEREIN.

REPORTS, PROCESS SHEETS, INSPECTION METHODS SHEETS AND ALL OTHER

DOCUMENTS REQUIRED BY SPECIFICATIONS IMPOSED BY THIS CONTRACT FOR

CONTRACTOR COMPLIANCE WHICH WERE PREVIOUSLY REQUIRED TO BE SUBMITTED TO

A PRIME DESIGN CONTRACTOR SHALL BE HELD AT THAT FACILITY FOR REVIEW BY

GOVERNMENT PERSONNEL. WHEN PRIME DESIGN SOURCE SPECIFICATIONS REQUIRE OR

PROVIDE FOR PARTICIPATION BY THAT PRIME SOURCE QUALITY, MANUFACTURING,

LABORATORY OR ENGINEERING SUPPORT SERVICES, THESE REQUIREMENTS OR

PROVISIONS DO NOT APPLY WHEN THE CONTRACT WAS ISSUED BY THIS PROCURING

ACTIVITY. FOR THESE SERVICES OR DIRECTION PERTAINING THERETO, CONTACT

THE GOVERNMENT CONTRACT ADMINISTRATION OFFICE OR THIS PROCURING ACTIVITY

FOR ASSISTANCE.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

THE CONTRACTOR IS RESPONSIBLE FOR ASSURING THAT ALL DIMENSIONS,

CONDITIONS, TESTS AND TEST RESULTS IDENTIFIED IN THESE ENGINEERING

NOTES, APPLICABLE DRAWINGS, SPECIFICATIONS AND CONTRACT QUALITY

REQUIREMENTS ARE MET BY THEMSELVES AND THEIR SUPPLIERS. THIS REQUIREMENT

APPLIES TO ALL CHARACTERISTICS WHETHER THOSE CHARACTERISTICS HAVE BEEN

SPECIFICALLY DESIGNED AS BEING CRITICAL, MAJOR OR ARE THOSE MINOR

CHARACTERISTICS NOT SPECIFICALLY DESIGNATED AS SUCH.

PROCESS DATA REQUIREMENTS (CHECK WHEN APPLICABLE)

( ) PRIOR TO BEGINNING OF MANUFACTURE, THE CONTRACTOR WILL NOTIFY THE

ENGINEERING OFFICE OF THIS PROCURING ACTIVITY OF ALL MANUFACTURING

PROCESS AND PROCESSING PROCEDURES INTENDED FOR USE IN PRODUCTION OF THIS

PRODUCT. ONCE THESE PROCESSES ARE ESTABLISHED, NO CHANGES SHALL BE MADE

WITHOUT PRIOR APPROVAL OF THE ENGINEERING OFFICE OF THIS PROCURING

ACTIVITY.

( ) SERIALIZATION OF PARTS (CHECK WHEN APPLICABLE)

SERIALIZATION OF EACH PART/ASSEMBLY (CONTRACT END ITEM) IS REQUIRED.

STABLE BASE DRAWINGS: (CHECK WHEN APPLICABLE)

(X) WHEN THE USE OF STABLE BASE DRAWINGS IS REQUIRED, THE FOLLOWING

SHALL APPLY:

A. STABILIZE BY ALLOWING THE STABLE BASE DRAWING TO REST FLAT AND

UNRESTRAINED ON A FLAT SURFACE OVERNIGHT AT ROOM TEMPERATURE PRIOR TO

USE.

B. DO NOT STRETCH OR OTHERWISE APPLY STRESS.

C. CHECK THE DIMENSIONAL ACCURACY OF THE GRID LINES. THE DIMENSION

BETWEEN ADJACENT GRID LINES MUST BE WITHIN ? .005 INCH. THE GRID LINES

SHALL BE MEASURED VERTICALLY, HORIZONTALLY AND DIAGONALLY, TO INSURE

THAT THE GRIDS ARE WITHIN A TOLERANCE OF ? .005 INCH. THE TOLERANCE IS

ACCUMULATED OVER THE LENGTH AND WIDTH OF THE STABLE BASE DRAWING.

D. TRAMMEL POINTS SHALL BE MEASURED TO WITHIN .010

E. WHEN ROLLING STABLE BASE DRAWINGS, DO NOT ROLL LESS THAN 3 INCHES IN

DIAMETER.

F. IF THE ABOVE TOLERANCE POINTS PROVE TO BE INACCURATE, RECORD THE

DISCREPANCIES IMMEDIATELY AND NOTIFY IN WRITING. OC-ALC/PKXDA AND THE

ADMINISTRATIVE CONTRACTING OFFICER (ACO).

RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED

COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE

OFFICE.REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND

DOCUMENTS:

THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305 AND OR

L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE PROCESSES AND

OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS, SPECIFICATIONS AND

DOCUMENTS.

THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH

MIL SPEC, MIL STD, INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE

DATE OF THIS CONTRACT UNLESS OTHERWISE NOTED.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RT001: MEASURING AND TEST EQUIPMENT

A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil;(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE

TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN

THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR

HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),

THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM

DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON

STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS

OF THE UNDIMENSIONED DRAWING.

THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR

DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE

DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE

INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND

(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)

0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH

DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO

WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.

REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED

TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

CRITICAL APPLICATION ITEM

THE BOEING COMPANY DBA BOEING 81205 P/N 25-6267-506

PRODUCT MANUFACTURING CORPORATION 30869 P/N 25-6267-506

G. S. E. DYNAMICS, INC. 29183 P/N 25-6267-506

IAW REFERENCE DRAWING NR 81205 25-6269

REVISION NR B DTD 12/17/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 23-2627

REVISION NR A DTD 09/13/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5305

REVISION NR K DTD 09/26/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5305

REVISION NR K DTD 09/25/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5977

REVISION NR N DTD 02/03/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5977

REVISION NR N DTD 11/06/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACD2000

REVISION NR R DTD 08/31/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACR15AY

REVISION NR U DTD 04/28/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001-1

REVISION NR F DTD 02/02/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001-1

REVISION NR F DTD 09/23/2013

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 81205 BAC5001-2

REVISION NR H DTD 04/11/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 11/22/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 01/17/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5423

REVISION NR W DTD 09/15/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6267

REVISION NR G DTD 12/17/1982

PART PIECE NUMBER: 25-6267-506

IAW REFERENCE DRAWING NR 81205 BMS1-11L

REVISION NR L DTD 04/16/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5047

REVISION NR K DTD 10/09/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5915

REVISION NR M DTD 10/04/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACD2001

REVISION NR L DTD 09/13/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10A

REVISION NR H DTD 04/01/1956

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 23-2570

REVISION NR A DTD 05/17/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 23-2652

REVISION NR A DTD 09/19/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 23-2746

REVISION NR A DTD 05/21/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 23-3866

REVISION NR DTD 01/16/1958

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6270

REVISION NR C DTD 12/17/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 25-6317

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6480

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 25-6488

REVISION NR A DTD 01/17/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 25-6488

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6770

REVISION NR B DTD 12/22/1959

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 26-3248

REVISION NR A DTD 07/07/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 26-3269

REVISION NR A DTD 07/07/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 26-3734

REVISION NR C DTD 01/25/1960

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 29-5767

REVISION NR A DTD 01/03/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 29-5871

REVISION NR A DTD 01/09/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 29-5891

REVISION NR A DTD 07/12/1965

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-5970

REVISION NR DTD 12/10/1979

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-5970

REVISION NR DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 29-6086

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 30-1421

REVISION NR B DTD 06/10/1955

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 33-1141

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 36-1867

REVISION NR DTD 04/30/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 36-1877

REVISION NR DTD 04/09/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 36-1878

REVISION NR DTD 04/01/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 39-2897

REVISION NR A DTD 08/31/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 39-2951

REVISION NR DTD 04/01/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 39-2960

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 39-2967

REVISION NR A DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 12/05/2011

IAW REFERENCE DRAWING NR 81205 9-67607

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REVISION NR B DTD 09/21/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-3

REVISION NR J DTD 01/13/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5010

REVISION NR W DTD 10/02/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACB30CP

REVISION NR J DTD 09/06/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACC10DA

REVISION NR DTD 04/28/1958

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACF22M

REVISION NR F DTD 08/27/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10M

REVISION NR F DTD 10/28/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10P

REVISION NR J DTD 04/01/1956

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10R

REVISION NR D DTD 02/24/1960

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS1-11L

REVISION NR D DTD 12/12/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5875

REVISION NR N DTD 12/04/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5975

REVISION NR M DTD 06/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 36-1868

REVISION NR B DTD 11/17/1964

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5875

REVISION NR N DTD 01/07/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5975

REVISION NR M DTD 10/28/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D6-14058

REVISION NR K DTD 11/01/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5010

REVISION NR W DTD 10/30/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001-3

REVISION NR G DTD 06/19/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 23-2652/1

REVISION NR A DTD 02/10/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 81205 BAC5423

REVISION NR W DTD 09/02/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5401

REVISION NR E DTD 07/19/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5401

REVISION NR E DTD 03/25/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 04/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 10/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1521-381

REVISION NR AR DTD 04/23/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACC19B

REVISION NR P DTD 08/08/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACD2003

REVISION NR D DTD 04/09/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACC10Q

REVISION NR Y DTD 06/20/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 05/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 03/04/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001

REVISION NR M DTD 09/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001

REVISION NR M DTD 03/21/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001-2

REVISION NR H DTD 02/22/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1490-2518

REVISION NR BG DTD 03/30/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6267

REVISION NR G DTD 01/20/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6270

REVISION NR C DTD 01/20/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6271

REVISION NR C DTD 10/05/1960

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 81205 29-6229

REVISION NR A DTD 04/03/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-5821

REVISION NR A DTD 10/06/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 26-3555

REVISION NR A DTD 01/25/1960

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 36-1862

REVISION NR DTD 04/30/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-5768

REVISION NR A DTD 04/03/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 39-2894

REVISION NR A DTD 01/22/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 23-2656

REVISION NR A DTD 03/22/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 26-3913

REVISION NR A DTD 04/03/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 23-2798

REVISION NR A DTD 04/03/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6271/2

REVISION NR C DTD 10/05/1960

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-6229/1

REVISION NR A DTD 08/16/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 26-3913/1

REVISION NR A DTD 03/01/1958

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 23-2798/1

REVISION NR A DTD 08/02/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1490-2505

REVISION NR A DTD 05/09/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1490-2689

REVISION NR N DTD 12/10/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1512-373

REVISION NR DTD 04/15/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1521-386

REVISION NR H DTD 02/28/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1521-492

REVISION NR J DTD 02/28/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 36-1868

REVISION NR B DTD 01/20/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D-13046

REVISION NR DTD 07/12/1966

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6269/2

REVISION NR A DTD 06/11/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 33-1141/1

REVISION NR A DTD 06/11/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6480/2

REVISION NR A DTD 06/11/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-6086/1

REVISION NR A DTD 06/11/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 25-6770/2

REVISION NR B DTD 06/11/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-3

REVISION NR J DTD 05/12/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001-6

REVISION NR J DTD 06/06/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10L

REVISION NR J DTD 10/22/1959

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10M

REVISION NR G DTD 07/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACM10S

REVISION NR H DTD 02/03/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5001-3

REVISION NR G DTD 05/20/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 06/22/1993

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 0073311227 0001 EA 4.000

NSN/MATERIAL:1650008983533

DELIVERY (IN DAYS):0143

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 29 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0073311227 PRLI: 0001 CONT’D

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

US

Need Ship Date:09/03/2018 Original Required Delivery Date:04/30/2019

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 29 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEPT 2013) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016)

(DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (DFARS)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https:// www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.acquisition.gov https://www.acquisition.gov https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 29 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

__*** When creating documents in Wide Area Workflow, both an invoice and receiving report are required for origin inspection awards or awards shipping to a DLA depot for stock regardless of inspection point (see clause 252.246-7000 for additional information regarding receiving reports). For awards requiring both a receiving report and invoice, a combo type document may be used. For awards in accordance with fast payment procedures, only create an invoice and check the Fast Payment Procedure in Wide Area Workflow. See clause 252.232-7006 for further Wide Area Workflow information. For service contracts, a two-in-one invoice is required. (DoDAAC information should be completed.)***

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

__***See Award***____________________________________________________

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award- Block 14 of 1155

Issue By DoDAAC See Block 5 of Form SF18

Admin DoDAAC See Resulting Award- Block 7 of Form 1155

Inspect By DoDAAC If at Origin- see Admin DODAAC, if at Dest- see

Ship to Ship To Code See Schedule in Section B of Form 1155 Ship From Code TBD

Mark For Code N/A

Service Approver (DoDAAC)

N/A

Service Acceptor (DoDAAC)

N/A https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 29 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

Field Name in WAWF Data to be entered in

WAWF

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/ cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

_See Block 24 of Form 1155__________________________________________________________

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

__See Block 24 of Form 1155__________________________________________________________

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) (DFARS)

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) (DFARS)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

(FAR)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) (FAR)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) (FAR)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)

52.213-4 TERMS AND CONDITIONS—SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL ITEMS) (JAN 2017) (FAR)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 29 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

(c) FAR 52.252-2, Clauses Incorporated by Reference (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

_For FAR and DFARS clauses: https://www.acquisition.gov/____

_For DLAD Clauses:__http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx___

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) (FAR)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) (FAR)

52.243-1 CHANGES - FIXED PRICE (AUG 1987) (FAR)

52.246-2 INSPECTION OF SUPPLIES- FIXED PRICE (AUG 1996) (FAR)

52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) (FAR)

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (DFARS)

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) (DFARS)

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) (FAR)

(a) Definitions. As used in this provision–

“Commercial and Government Entity (CAGE) code” means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

file:///52_248_253.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 29 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(b) The Offeror represents that it □ has or □ does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph

(d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code: ____________________

Immediate owner legal name: ______________________

(Do not use a “doing business as” name)

Is the…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.