SPE4A718T026F.PDF

PDF 294 KB Posted

Attached to
PANEL ASSEMBLY, SKIN Federal contract opportunity
Solicitation number
SPE4A718T026F
Issued by
Defense Logistics Agency Aviation

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE4A7-18-T-026F

2. DATE ISSUED

2018 FEB 07

3. REQUISITION/PURCHASE REQUEST NO.

0072844017

RATING

DO-C9

DLA AVIATION

ASC SUPPLIER OPER AE AND AF DIV

8000 JEFFERSON DAVIS HWY

RICHMOND VA 23297

USA

Name: Mary Repole Buyer Code:GPD4510 Tel: 804-279-5413 Email: Mary.Repole@dla.mil

6. DELIVER BY (Date)

446 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 FEB 14

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED

ACQUISITIONS REVISION 45 (FEBRURARY 1, 2018) WHICH CAN BE FOUND ON THE WEB AT:

http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master%20Solicitation%20Rev-45%20February-1-2018.pdf?ver=2018-01-31-124727-06

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 25

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 25 PAGES

SPE4A7-18-T-026F

CONTINUED ON NEXT PAGE

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413 SEE http://www.sba.gov/content/table-small-business-size-standards

FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

Fast Pay does not apply to this solicitation

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break informationsubmitted with the offeror's original quotation without further solicitation or discussion.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a laterdate. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION A

cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:

http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx

Procurement History for NSN/FSC:007785427/1560

CAGE Contract Number Quantity Unit Cost AWD Date

99115 SPE4A718P1809 3.000 14649.00000 20171109

99115 SPE4A717PF027P00001 2.000 16649.00000 20170915

99115 SPE4A717P4479P00002 6.000 16649.00000 20170123

99115 SPE4A717P3048 2.000 16000.00000 20161209

99115 SPE4A417V0555P00001 2.000 16000.00000 20161021

99115 SPE4A716MC289P00001 2.000 15000.00000 20160826

99115 SPE4A714M3728P00002 10.000 11810.00000 20131220

99115 SPE4A712M2589P00001 2.000 11250.00000 20120613

99115 SPE4A712M2226P00001 4.000 11250.00000 20120606

29957 SPM4A711MR843P00003 1.000 11518.00000 20110713

29957 SPM47504D01630047 4.000 4702.50000 20080303

29957 SPM47504D01630010 6.000 4702.50000 20051214

29957 SP047504D01630014 2.000 4801.50000 20050803

29957 SP047504D01630011 10.000 4801.50000 20041029

29957 SP047504D01630001 2.000 4801.50000 20031028

29957 SP047502C1763 32.000 5057.00000 20020731

59213 SP047502MGK68 5.000 6850.90000 20020618

99115 SP047599C0166 14.000 6500.00000 19990830

29183 SP046097M2575 10.000 7290.00000 19970117

99115 F0960394G0047TYE5 6.000 3964.00000 19960227

This solicitation is being issued under the First Destination Transportation (FDT) program to reduce cost of transportation through the use of Government-Arranged Trasnportation utilizing Government contracts and rates. If this acquisition is for Foreign Military Sales (FMS) FDT will not apply. For FDT program transportation requirements, see Procurement Note C15 - First Destination Transportation (FDT) Program, Government Arranged Transportation for Automated Awards, Procurement Note C17 - FDT Program-Shipments Originating from Outside the Contiguous United States and C20 - Vendor Shipment Module (VSM). Offers should be submitted based on FOB Origin.

For offerors whose shipments will orginate from outside the contiguous United States, the offeror's FOB Origin price shall include transportation to a contiguous United States location that the offeror selects based on cost effectiveness or other variables at the offeror's discretion. Additional information about FDT can be found at:

http://www.dla.mil/FDTPI/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0072844017

NSN/MATERIAL:1560007785427

ITEM DESCRIPTION

PANEL ASSEMBLY,SKIN

PANEL ASSEMBLY

DWG: 34-1091 MYLAR SHEET 2<(>,<)> ENGR NOTE 41

DWG: 34-1091<(>,<)> DASH NO -514; ENGR NOTES 1-35, 40-41

DWG: 29-4641<(>,<)> DASH NO -503,-504; ENGR NOTES 1-4,31-34

DWG: 29-9763<(>,<)> DASH NO -3,-4; ENGR NOTES 1-4,31-34,36-39

DWG: 90-3964<(>,<)> DASH NO -502, ENGR NOTES 1-4,31-34

BAC 1517<(>,<)> DASH NO -1131

EXCEPTIONS DATA:

1.,,CONTRACT AWARD MANUFACTURER MUST OBTAIN BONDING FROM AN APPROVED

SOURCE LISTED ON AIR FORCE DRAWING NUMBER 9485265, ATTACHED TO THIS

TECHNICAL DATA PACKAGE. QUALIFICATION OF BONDING SOURCES/FACILITIES ARE

CONTROLLED BY THE B-52 ENGINEERING OFFICE, 540 ACSG/GFLB, TINKER AFB, OK

73145.

2.,,FINISH CALL OUT: CHEMICAL TREAT ACCORDING TO MIL-DTL-5541, CLASS 3.

AND MIL-DTL-81706, CLASS 3, FORM I OR II, METHOD A OR B. APPLY TWO COATS

OF MIL-PRF-23377, TYPE I, CLASS C2 PRIMER ACCORDING TO THE MANUFACTURERS

APPLICATION INSTRUCTIONS AND MIL-F-18264.

3.,,PART TO BE FURNISHED WITHOUT FASTENER HOLES EXCEPT THOSE REQUIRED

FOR ASSEMBLY.

4.,,ADD 0.50-INCH EXCESS TRIM ALLOWANCE TO ALL EXTERIOR EDGES OF PANEL

(EXCEPT TRAILING EDGE ASSEMBLIES).

5.,,ALL BONDED ASSEMBLIES SHALL BE INSPECTED FOR INTERNAL FLAWS SUCH AS

VOIDS, BLISTERS, AND DELAMINATIONS WITH THE AID OF NDI INSTRUMENTS IN

ACCORDANCE WITH BAC 5968, TYPE I, II, OR III

6.,,USE BAC 5514, BAC 5514-5137 AND BMS 5-137 IN LIEU OF BAC 5514-542,

BMS 5-42 AND/OR BAC 5425 AND BMS 5-15.

7.,,FOR STRUCTURAL ADHESIVE BONDING PHOSPHORIC ACID ANODIZE ACCORDING TO

BAC 5555, OPTIONAL SAE ARP 1524 (IN LIEU OF FINISH CODE F-2.20).

8.,,USE ASTM D4376 IN LIEU OF SAE AMS-T-81533 TRICHLOROETHANE 1,1,1.

9.,,OPTIONAL TO USE SAE AMS-C-7438 IN LIEU OF BMS 4-4 (ALL HONEYCOMB TO

BE PERFORATED)

10.,,USE D-16122 IN LIEU OF D-17318.

11.,,USE BMS 5-17 AND D520-12836-1 IN LIEU OF BMS 5-20.

12.,,APPLY HT-424F ADHESIVE PRIMER TO ALL SURFACES TO BE BONDED WITH

HT-424 ADHESIVE PER BMS 5-17

13.,,USE BMS 5-137 IN LIEU OF BMS 5-15, BMS 5-40, BMS 5-70 AND BMS 5-71

14.,,USE BMS 5-95 IN LIEU OF BMS 5-19 AND BMS 5-44

15.,,USE SAE AMS 3374 AND SAE AMS 3374/1 IN LIEU OF BMS 5-22 AND/OR

MIL-S-38249

16.,,USE BAC 5514, BAC 5514-590 AND BMS 5-90, TYPE III OR TYPE IV IN

LIEU OF BAC 5452, BAC 5457 AND BMS 8-30, TYPE II (BAC FOAM 307 TYPE II)

17.,,USE NAPHTHA PER TT-N-95 IN LIEU OF BMS 3-2

18.,,USE BMS 5-95 PER D3-1453 AND D-16122 IN LIEU OF EPON 815 PER

D-17318

19.,,USE BMS 5-95 PER D3-1453 AND D-16122 IN LIEU OF PRO SEAL 700 PER

BAC 5000

20.,,USE BMS 5-95 AND D3-1453 IN LIEU OF BMS 5-12, (TYPE B) PER BAC 5000

21.,,USE BMS 5-95 AND D3-1453 IN LIEU OF BMS 5-13 (TYPE A) PER BAC 5030

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

22.,,HEAT TREAT ALUMINUM ALLOY PER SAE AMS 2770 AND SAE AMS 2772 IN LIEU

OF MIL-H-6088 AND/OR BAC 5602.

23.,,HEAT TREAT ALUMINUM ALLOY 2024 PLATE/SHEET TO T42 TEMPER IN LIEU OF

T4.

24.,,USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-250/4 BARE ALUMINUM ALLOY 2024

SHEET IN LIEU OF 2024 CLAD SHEET PER QQ-A-362.

25.,,USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/4 BARE ALUMINUM ALLOY

2024-T3 SHEET IN LIEU OF 2024-T3 CLAD SHEET PER QQ-A-362

26.,,USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/4 BARE ALUMINUM ALLOY

2024-T3 SHEET IN LIEU OF QQ-M-44, COND H

27.,,USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/12 BARE ALUMINUM ALLOY

7075-T6 SHEET IN LIEU OF 7075-T6 CLAD SHEET PER QQ-A-287 OR BMS 7-42

28.,,USE NOTE 2, FINISH CALL OUT IN LIEU OF FINISH CODES F-3.80.

29.,,FINISH CODE F-2.10 DEFINED: APPLY NO FINISH, EXCEPT THAT TEMPORARY

PROTECTION MAY BE APPLIED FOR TRANSPORTATION, HANDLING, AND STORAGE.

30.,,USE MS20604B3W1 UNIVERSAL HEAD BLIND RIVETS PER AIA/NAS NASM20604

IN LIEU OF BACR15K-127-3-2. (USE MS20604B3W2 IN LIEU OF MS20604B3K2)

31.,,PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS

AND BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

32.,,DELETE REFERENCE TO 2-5000 OR D2-5000, 520-13566, AND BAC 5005.

33.,,SURFACE TEXTURE PER ASME B46.1 IN LIEU OF BACD 2097.

34.,,DIMENSIONS AND TOLERANCES PER ASME Y14.5M IN LIEU OF MIL-STD-8.

35.,,USE AIA/NAS 1080 FOR COLLAR LOCKBOLTS, IN LIEU OF BACC30A

36.,,FINISH CODE F-1.108 DEFINED: CADMIUM PLATE ACCORDING TO SAE

AMS-QQ-P-416, TYPE II, CLASS 2. APPLY MIL-PRF-23377, TYPE I, CLASS C2

PRIMER TO A DRY FILM THICKNESS OF 0.0006 TO 0.001 INCH ACCORDING TO THE

MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264.

37.,,USE SAE AMS 6400 FOR STEEL FORGINGS, IN LIEU OF MIL-F-7190.

38.,,FINISH CODE F-1.10 DEFINED: APPLY NO FINISH, EXCEPT THAT TEMPORARY

PROTECTION MAY BE APPLIED FOR HANDLING, TRANSPORTATION AND STORAGE.

39.,,USE 4140 STEEL BAR/ROD/FORGING PER SAE AMS 6349, IN LIEU OF

MIL-S-5626.

40.,,MAJOR CHARACTERISTICS:

A. HONEYCOMB CORE DIRECTION.

B. PHOSPHORIC ACID ANODIZE PER BAC 5555 OR SAE ARP 1524.

C. ULTRASONIC INSPECTION PER BAC 5968 AND BAC 5980

D. BONDING REQUIREMENTS PER BAC 5514

ADDITIONAL ENGINEERING NOTES:

PER 339 DSCR-ZD-12-72730

1. .3751NCH EXCESS ON EXTERIOR FORWARD EDGE IS ALLOWED

2. USE 29-4641-3 IN LIEU OF 29-4641-503 BOX END FITTING IS ALLOWED

3. USE 29-4641-4 IN LIEU OF 29-4641-504 BOX END FITTING IS ALLOWED

4. USE HS15-6 COLLAR IN LIEU OF NAS528A6 COLLAR IS ALLOWED

5. USE BACB30FM-6-6 HI-LOK IN LIEU OF BACB30AR-6-6 HI-LOK IS ALLOWED

6. USE NAS1669-3L3 BOLT IN LIEU OF P-200-3 BOLT OR BACB30CC6-3 BOLT IS

ALLOWED

7. USE MS20470B6-3 RIVET IN LIEU OF NAS1806-6 RIVET IS ALLOWED

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

8. PERMISSIBLE TO USE/OMIT CR127-3-2 OR BACR15K-127-3-2 RIVET AS

REQUIRED IS ALLOWED

ADDITIONAL ENGINEERING NOTES:

THE USE OF BMS5-137 ILO BMS5-17 HAS BEEN APPROVED BASED ON THE ESA

EVALUATION OF THE TWO ADHESIVES. CONCLUSION: THE BMS 5-137 SYSTEM IS A

SUPERIOR SYSTEM TO THE BMS 5-17 ADHESIVE SYSTEM. THE BMS 5-137 MEETS

AND, IN MOST CASES, EXCEED THE KEY VALUES AND IS TOUGHENED TO PROVIDE

LONG TERM DURABILITY AND FATIGUE RESISTANCE. BASED ON THE ABOVE

EVALUATION OF THE TWO ADHESIVE SYSTEMS, B-52 SPO RECOMMENDS USING BMS

5-137 PRIMER AND SUPPORTED FILM ADHESIVE ON THE SUBJECT B-52 ACCESS DOOR

ASSEMBLY IN LIEU OF THE BMS 5-17 ADHESIVE SYSTEM.

IF BMS5-137 ADHESIVE IS BEING USED THAN NON-PERFORATED HONEYCOMB IS

AUTHORIZED PER DSCR-QC-17-05816.

41. WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE

TO THIS PRODUCT ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: AN ITEM, WHICH REQUIRES SPECIAL

MANUFACTURING PROCESSES, CONTROLS, AND TESTING OF MATERIAL OR END ITEMS.

BECAUSE OF ITS USE OR APPLICATION, FAILURE TO MAINTAIN THE HIGHEST

RELIABILITY OF SUCH AN ITEM COULD BE CATASTROPHIC RESULTING IN LOSS OF

LIFE OR SERIOUS INJURY, LOSS OF A WEAPON SYSTEM OR EXTENSIVE SECONDARY

DAMAGE, WITH DIRECT IMPACT ON THE CAPABILITY TO RESPOND TO A NATIONAL

EMERGENCY OR TO ACHIEVE WARTIME SUSTAINABILITY.

(B) CRITICAL CHARACTERISTICS: CHARACTERISTICS WHICH, WHEN DEFECTIVE, ARE

LIKELY TO RESULT IN HAZARDOUS OR UNSAFE CONDITIONS FOR INDIVIDUALS

USING, MAINTAINING OR DEPENDING UPON THE PRODUCT; OR, ARE LIKELY TO

PREVENT PERFORMANCE OF THE TACTICAL FUNCTION OF A MAJOR END ITEM SUCH AS

AN AIRCRAFT, MISSILE, SPACE VEHICLE, ENGINE OR A MAJOR PART THEREOF.

(DERIVED FROM MIL-STD-1916).

(C) MAJOR CHARACTERISTICS: CHARACTERISTICS (OTHER THAN CRITICAL OR

MINOR) WHICH, WHEN DEFECTIVE, ARE LIKELY TO RESULT IN FAILURE OR TO

REDUCE THE USABILITY OF THE PRODUCT OR A MAJOR END ITEM FOR ITS INTENDED

PURPOSE. (DERIVED FROM MIL-STD-1916).

(D) MINOR CHARACTERISTICS: ALL CHARACTERISTICS NOT DESIGNATED AS

CRITICAL OR MAJOR BUT FOR WHICH FULL CONFORMITY IS REQUIRED.

(E) COMPLEX: ITEMS HAVING QUALITY CHARACTERISTICS NOT WHOLLY VISIBLE

(HIDDEN CHARACTERISTICS), IN THE END PRODUCT FOR WHICH CONTRACTUAL

CONFORMANCE MUST BE ESTABLISHED PROGRESSIVELY THROUGH PRECISE

MEASUREMENTS, TESTS OR CONTROLS APPLIED DURING PURCHASING,

MANUFACTURING, PERFORMANCE, ASSEMBLY AND FUNCTIONAL OPERATION EITHER AS

AN INDIVIDUAL ITEM OR IN CONJUNCTION WITH OTHER ITEMS [FAR SUBPART

46.203(B)].

(F) COMMERCIAL: DESCRIBED IN COMMERCIAL CATALOGS, DRAWINGS OR INDUSTRIAL

STANDARDS [FAR SUBPART 46.203(A), (1)].

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW):

( ) ENGINEERING CRITICAL IN APPLICATION

( ) CRITICAL CHARACTERISTICS

(X) MAJOR CHARACTERISTICS

(X) MINOR CHARACTERISTICS, ALL EXCEPTING CRITICAL AND MAJOR

( ) COMPLEX

( ) AVAILABLE AS A COMMERCIAL PRODUCT

WHEN MATERIALS, PROCESSES OR COMPONENTS ARE TO BE OBTAINED FROM DIRECTED

SOURCES AS INDICATED HEREIN OR IN THE SPECIFICATIONS, ALTERNATE SOURCES

MAY ONLY BE UTILIZED UPON PRIOR APPROVAL BY THE CONTRACTING OFFICER OF

THIS PROCURING ACTIVITY AS A DEVIATION.

BIDDERS SHALL NOTIFY THIS PROCURING ACTIVITY AT THE TIME OF QUOTATION OF

ANY DRAWING, SPECIFICATION OR STANDARD WHICH IS OF MORE CURRENT DATA

REVISION THAN THOSE SHOWN ON THE DATA LISTING OR IN THESE ENGINEERING

NOTES. DETERMINATION OF ACCEPTABILITY OF THE MORE CURRENTLY DATED DATA

WILL BE MADE BY THE RESPONSIBLE ENGINEERING OFFICE OF THIS PROCURING

ACTIVITY.

LOWER TIER SPECIFICATIONS LISTED IN OR REFERENCED BY FIRST TIER

SPECIFICATIONS MAY NOT BE SHOWN ON THE DATA LISTS OR ENGINEERING NOTES

ACCOMPANYING THIS CONTRACT BUT ARE NONETHELESS REQUIRED BY THIS CONTRACT

FOR COMPLIANCE. EXCEPTIONS WOULD OCCUR ONLY WHEN SUCH LOWER TIER

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REQUIREMENTS HAVE BEEN SPECIFICALLY WAIVED OR SUBSTITUTE

SPECIFICATIONS/REQUIREMENTS ARE DESIGNATED HEREIN.

REPORTS, PROCESS SHEETS, INSPECTION METHODS SHEETS AND ALL OTHER

DOCUMENTS REQUIRED BY SPECIFICATIONS IMPOSED BY THIS CONTRACT FOR

CONTRACTOR COMPLIANCE WHICH WERE PREVIOUSLY REQUIRED TO BE SUBMITTED TO

A PRIME DESIGN CONTRACTOR SHALL BE HELD AT THAT FACILITY FOR REVIEW BY

GOVERNMENT PERSONNEL. WHEN PRIME DESIGN SOURCE SPECIFICATIONS REQUIRE OR

PROVIDE FOR PARTICIPATION BY THAT PRIME SOURCE QUALITY, MANUFACTURING,

LABORATORY OR ENGINEERING SUPPORT SERVICES, THESE REQUIREMENTS OR

PROVISIONS DO NOT APPLY WHEN THE CONTRACT WAS ISSUED BY THIS PROCURING

ACTIVITY. FOR THESE SERVICES OR DIRECTION PERTAINING THERETO, CONTACT

THE GOVERNMENT CONTRACT ADMINISTRATION OFFICE OR THIS PROCURING ACTIVITY

FOR ASSISTANCE.

THE CONTRACTOR IS RESPONSIBLE FOR ASSURING THAT ALL DIMENSIONS,

CONDITIONS, TESTS AND TEST RESULTS IDENTIFIED IN THESE ENGINEERING

NOTES, APPLICABLE DRAWINGS, SPECIFICATIONS AND CONTRACT QUALITY

REQUIREMENTS ARE MET BY THEMSELVES AND THEIR SUPPLIERS. THIS REQUIREMENT

APPLIES TO ALL CHARACTERISTICS WHETHER THOSE CHARACTERISTICS HAVE BEEN

SPECIFICALLY DESIGNED AS BEING CRITICAL, MAJOR OR ARE THOSE MINOR

CHARACTERISTICS NOT SPECIFICALLY DESIGNATED AS SUCH.

PROCESS DATA REQUIREMENTS (CHECK WHEN APPLICABLE)

( ) PRIOR TO BEGINNING OF MANUFACTURE, THE CONTRACTOR WILL NOTIFY THE

ENGINEERING OFFICE OF THIS PROCURING ACTIVITY OF ALL MANUFACTURING

PROCESS AND PROCESSING PROCEDURES INTENDED FOR USE IN PRODUCTION OF THIS

PRODUCT. ONCE THESE PROCESSES ARE ESTABLISHED, NO CHANGES SHALL BE MADE

WITHOUT PRIOR APPROVAL OF THE ENGINEERING OFFICE OF THIS PROCURING

ACTIVITY.

( ) SERIALIZATION OF PARTS (CHECK WHEN APPLICABLE)

SERIALIZATION OF EACH PART/ASSEMBLY (CONTRACT END ITEM) IS REQUIRED.

STABLE BASE DRAWINGS: (CHECK WHEN APPLICABLE)

(X) WHEN THE USE OF STABLE BASE DRAWINGS IS REQUIRED, THE FOLLOWING

SHALL APPLY:

A. STABILIZE BY ALLOWING THE STABLE BASE DRAWING TO REST FLAT AND

UNRESTRAINED ON A FLAT SURFACE OVERNIGHT AT ROOM TEMPERATURE PRIOR TO

USE.

B. DO NOT STRETCH OR OTHERWISE APPLY STRESS.

C. CHECK THE DIMENSIONAL ACCURACY OF THE GRID LINES. THE DIMENSION

BETWEEN ADJACENT GRID LINES MUST BE WITHIN ? .005 INCH. THE GRID LINES

SHALL BE MEASURED VERTICALLY, HORIZONTALLY AND DIAGONALLY, TO INSURE

THAT THE GRIDS ARE WITHIN A TOLERANCE OF ? .005 INCH. THE TOLERANCE IS

ACCUMULATED OVER THE LENGTH AND WIDTH OF THE STABLE BASE DRAWING.

D. TRAMMEL POINTS SHALL BE MEASURED TO WITHIN .010

E. WHEN ROLLING STABLE BASE DRAWINGS, DO NOT ROLL LESS THAN 3 INCHES IN

DIAMETER.

F. IF THE ABOVE TOLERANCE POINTS PROVE TO BE INACCURATE, RECORD THE

DISCREPANCIES IMMEDIATELY AND NOTIFY IN WRITING. OC-ALC/PKXDA AND THE

ADMINISTRATIVE CONTRACTING OFFICER (ACO).

RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED

COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE

OFFICE.REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND

DOCUMENTS:

THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305 AND OR

L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE PROCESSES AND

OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS, SPECIFICATIONS AND

DOCUMENTS.

THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH

MIL SPEC, MIL STD, INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE

DATE OF THIS CONTRACT UNLESS OTHERWISE NOTED.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 25 PAGES

SECTION B

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE

TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN

THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR

HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),

THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM

DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON

STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS

OF THE UNDIMENSIONED DRAWING.

THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR

DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE

DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE

INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND

(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)

0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH

DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO

WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.

REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED

TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 81205 34-1091

REVISION NR D DTD 03/14/1960

PART PIECE NUMBER: 34-1091-514

IAW REFERENCE DRAWING NR 81205 BAC5968

REVISION NR C DTD 07/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98748 9485265

REVISION NR A DTD 05/22/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 11/22/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 01/17/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5010

REVISION NR Y DTD 06/30/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5034

REVISION NR N DTD 07/26/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5034

REVISION NR N DTD 06/26/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5423

REVISION NR W DTD 09/15/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5424

REVISION NR U DTD 03/07/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5424

REVISION NR U DTD 09/02/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5439

REVISION NR J DTD 02/20/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5439

REVISION NR J DTD 07/26/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514

REVISION NR AP DTD 05/01/1995

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

IAW REFERENCE DRAWING NR 81205 BAC5514

REVISION NR AP DTD 09/10/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-590

REVISION NR P DTD 07/03/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5555

REVISION NR T DTD 02/16/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS4-4Y

REVISION NR Y DTD 05/07/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-17G

REVISION NR G DTD 09/28/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS4-4Y

REVISION NR B DTD 06/04/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 D3-1453

REVISION NR AL DTD 10/21/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D-16925

REVISION NR BF DTD 03/24/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1091

REVISION NR D DTD 11/10/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5617

REVISION NR U DTD 12/13/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5617

REVISION NR U DTD 03/24/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-95N

REVISION NR N DTD 11/22/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-95R

REVISION NR A DTD 01/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5555

REVISION NR T DTD 04/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-3

REVISION NR J DTD 01/13/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5980

REVISION NR E DTD 09/25/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACB30AR

REVISION NR P DTD 12/08/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACB30CC

REVISION NR AB DTD 11/30/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D-16122

REVISION NR G DTD 06/04/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5010

REVISION NR W DTD 10/30/1998

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-5137

REVISION NR K DTD 02/15/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-5137

REVISION NR K DTD 11/03/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-590

REVISION NR P DTD 01/16/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5423

REVISION NR W DTD 09/02/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1517

REVISION NR BL DTD 04/27/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 04/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 10/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-90V

REVISION NR V DTD 12/20/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-90V

REVISION NR DTD 12/20/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 05/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 03/04/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D-16925

REVISION NR BF DTD 11/06/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D520-12836-1

REVISION NR C DTD 06/02/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1091/2

REVISION NR B DTD 03/01/1960

IAW REFERENCE DRAWING NR 81205 29-9763

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

REVISION NR C DTD 02/18/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-4641

REVISION NR B DTD 03/01/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-4641

REVISION NR B DTD 03/02/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 90-3964

REVISION NR F DTD 05/07/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 29-9763

REVISION NR C DTD 03/02/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 90-3964

REVISION NR F DTD 03/02/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-137L

REVISION NR L DTD 05/12/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-3

REVISION NR J DTD 05/12/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-137L

REVISION NR DTD 05/12/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-95R

REVISION NR R DTD 06/20/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-17G

REVISION NR A DTD 07/15/2014

CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE .

0001 0072844017 0001 EA 3.000

NSN/MATERIAL:1560007785427

DELIVERY (IN DAYS):0446

DELIVER FOB: ORIGIN

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PREP FOR DELIVERY:

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 25 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0072844017 PRLI: 0001 CONT’D

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

US

Need Ship Date:05/07/2019 Original Required Delivery Date:05/10/2019

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 25 PAGES

SECTION F - DELIVERIES OR PERFORMANCE

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) (FAR)

SECTION I - CONTRACT CLAUSES

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DoD OFFICIALS (SEPT 2011) (DFARS)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEPT 2013) (DFARS)

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) (DFARS)

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) (DFARS)

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) (DFARS)

252.204-7015 NOTICE OF AUTHORIZED DISCLOSURE OF INFORMATION TO LITIGATION SUPPORT CONTRACTORS (MAY 2016)

(DFARS)

252.225-7048 EXPORT-CONTROLLED ITEMS (JUN 2013) (DFARS)

252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012) (DFARS)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (MAY 2013) (DFARS)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https:// www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm https://www.acquisition.gov https://www.acquisition.gov https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

__*** When creating documents in Wide Area Workflow, both an invoice and receiving report are required for origin inspection awards or awards shipping to a DLA depot for stock regardless of inspection point (see clause 252.246-7000 for additional information regarding receiving reports). For awards requiring both a receiving report and invoice, a combo type document may be used. For awards in accordance with fast payment procedures, only create an invoice and check the Fast Payment Procedure in Wide Area Workflow. See clause 252.232-7006 for further Wide Area Workflow information. For service contracts, a two-in-one invoice is required. (DoDAAC information should be completed.)***

Note: If a “Combo” document type is identified but not supportable by the Contractor’s business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

__***See Award***____________________________________________________

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in

WAWF

Pay Official DoDAAC See Resulting Award- Block 14 of 1155

Issue By DoDAAC See Block 5 of Form SF18

Admin DoDAAC See Resulting Award- Block 7 of Form 1155

Inspect By DoDAAC If at Origin- see Admin DODAAC, if at Dest- see

Ship to Ship To Code See Schedule in Section B of Form 1155 Ship From Code TBD

Mark For Code N/A

Service Approver (DoDAAC)

N/A

Service Acceptor (DoDAAC)

N/A https://wawf.eb.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

Field Name in WAWF Data to be entered in

WAWF

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/ cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g.

timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the e-mail address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

_See Block 24 of Form 1155__________________________________________________________

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

__See Block 24 of Form 1155__________________________________________________________

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

(End of clause)

252.232-7010 LEVIES ON CONTRACT PAYMENTS (DEC 2006) (DFARS)

252.243-7001 PRICING OF CONTRACT MODIFICATIONS (DEC 1991) (DFARS)

252.244-7000 SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013) (DFARS)

252.246-7003 NOTIFICATION OF POTENTIAL SAFETY ISSUES (JUN 2013) (DFARS)

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

(FAR)

52.204-21 BASIC SAFEGUARDING OF COVERED CONTRACTOR INFORMATION SYSTEMS (JUN 2016) (FAR)

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008) (FAR)

52.211-5 MATERIAL REQUIREMENTS (AUG 2000) (FAR)

52.213-4 TERMS AND CONDITIONS—SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL ITEMS) (JAN 2017) (FAR)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 25 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

(c) FAR 52.252-2, Clauses Incorporated by Reference (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

_For FAR and DFARS clauses: https://www.acquisition.gov/____

_For DLAD Clauses:__http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx___

52.223-18 ENCOURAGING CONTRACTOR POLICIES TO BAN TEXT MESSAGING WHILE DRIVING (AUG 2011) (FAR)

52.232-39 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (JUN 2013) (FAR)

52.243-1 CHANGES - FIXED PRICE (AUG 1987) (FAR)

52.246-2 INSPECTION OF SUPPLIES- FIXED PRICE (AUG 1996) (FAR)

52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND SERVICE) (APR 1984) (FAR)

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS

252.203-7005 REPRESENTATION RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (NOV 2011) (DFARS)

252.204-7008 COMPLIANCE WITH SAFEGUARDING COVERED DEFENSE INFORMATION CONTROLS (OCT 2016) (DFARS)

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (JUL 2016) (FAR)

(a) Definitions. As used in this provision–

“Commercial and Government Entity (CAGE) code” means–

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Highest-level owner” means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

“Immediate owner” means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

file:///52_248_253.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 25 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(b) The Offeror represents that it has or does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph

(d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates “has” in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code: ____________________

Immediate owner legal name: ______________________

(Do not use a “doing business as” name)

Is the immediate owner owned or controlled by another entity?: Yes or No.

(d) If the Offeror indicates “yes” in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code: ___________________

Highest-level owner legal name: ___________________

(Do not use a “doing business as” name)

(End of provision)

52.204-8 ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2017) (FAR)

(a) The North American Industry classification System (NAICS) code for this acquisition is _SEE SECTION A OF

FORM SF18____.

(2) The small business size standard is _SEE SECTION A OF FORM SF18___ .

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b)(1) If the provision at 52.204-7, System for Award Management, is included in this solicitation, paragraph (d) of this provision applies.

(2) If the provision at 52.204-7 is not included in this solicitation, and the offeror is currently registered in the System for Award Management (SAM), and has completed the Representations and Certifications section of SAM electronically, the offeror may choose to use paragraph (d) of this provision instead of completing the corresponding individual representations and certification in the solicitation. The offeror shall indicate which option applies by checking one of the following boxes:

[_] (i) Paragraph (d) applies.

[_] (ii) Paragraph (d) does not apply and the offeror has completed the individual representations and certifications in the solicitation.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 25 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(c) (1) The following representations or certifications in SAM are applicable to this solicitation as indicated:

(i) 52.203-2, Certificate of Independent Price Determination. This provision applies to solicitations when a firm-fixed-price contract or fixed-price contract with economic price adjustment is contemplated, unless—

(A) The acquisition is to be made under the simplified acquisition procedures in Part 13;

(B) The solicitation is a request for technical proposals under two-step sealed bidding procedures;

or

(C) The solicitation is for utility services for which rates are set by law or regulation.

(ii) 52.203-11, Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions. This provision applies to solicitations expected to exceed $150,000.

(iii) 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements—Representation. This provision applies to all solicitations.

(iv) 52.204-3, Taxpayer Identification. This provision applies to solicitations that do not include the provision at 52.204-7, System for Award Management.

(v) 52.204-5, Women-Owned Business (Other Than Small Business). This provision applies to solicitations that—

(A) Are not set aside for small business concerns;

(B) Exceed the simplified acquisition threshold; and

(C) Are for contracts that will be performed in the United States or its outlying areas.

(vi) 52.209-2, Prohibition on Contracting with Inverted Domestic Corporations—Representation.

(vii) 52.209-5; Certification Regarding Responsibility Matters. This provision applies to solicitations where the contract value is expected to exceed the simplified acquisition threshold.

(viii) 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. This provision applies to all solicitations.

(ix) 52.214-14, Place of Performance--Sealed Bidding. This provision applies to invitations for bids except those in which the place of performance is specified by the Government.

(x) 52.215-6, Place of Performance. This provision applies to solicitations unless the place of performance is specified by the Government.

(xi) 52.219-1, Small Business Program Representations (Basic & Alternate I). This provision applies to solicitations when the contract will be performed in the United States or its outlying areas.

(A) The basic provision applies when the solicitations are issued by other than DoD, NASA, and the Coast Guard.

(B) The provision with its Alternate I applies to solicitations issued by DoD, NASA, or the Coast Guard.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 25 PAGES

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND STATEMENTS (CONTINUED)

CONTINUED ON NEXT PAGE

(xii) 52.219-2, Equal Low Bids. This provision applies to solicitations when contracting by sealed bidding and the contract will be performed in the United States or its outlying areas.

(xiii) 52.222-22, Previous Contracts and Compliance Reports. This provision applies to solicitations that include the clause at 52.222-26, Equal Opportunity.

(xiv) 52.222-25, Affirmative Action Compliance. This provision applies to solicitations, other than those for construction, when the solicitation includes the clause at 52.222-26, Equal Opportunity.

(xv) 52.222-38, Compliance with Veterans' Employment Reporting Requirements. This provision applies to solicitations when it is anticipated the contract award will exceed the simplified acquisition threshold and the contract is not for acquisition of commercial items.

(xvi) 52.222-57, Representation Regarding Compliance with Labor Laws (Executive Order 13673).

This provision applies to solicitations expected to exceed $50 million which are issued from October 25, 2016 through April 24, 2017, and solicitations expected to exceed $500,000, which are issued after…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.