SPE4A718Q1234.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE4A7-18-Q-1234

2. DATE ISSUED

2018 JUN 02

3. REQUISITION/PURCHASE REQUEST NO.

0073311929

RATING

DO-C9

DLA AVIATION

ASC SUPPLIER OPER AE AND AF DIV

8000 JEFFERSON DAVIS HWY

RICHMOND VA 23297

USA

Buyer: THUY HO PARFV56 Tel: 804-279-6092 Email: THUY.HO@dla.mil

6. DELIVER BY (Date)

300 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 JUN 08

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 27 PAGES

SPE4A7-18-Q-1234

CONTINUED ON NEXT PAGE

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED SOLICITATIONS CONTAINING FIRST ARTICLE TEST

REQUIREMENTS ARE NOT CANDIDATES FOR AN AUTOMATED AWARD.

ALL QUOTES MUST BE SUBMITTED VIA THE DLA INTERNET BID BOARD SYSTEM

(DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 336413 SEE

http://www.sba.gov/content/table-small-business-size-standards

ORIGIN INSPECTION REQUIRED - FAR 52.246-2 APPLIES

THE CONTRACTOR SHALL COMPLY WITH THE ISO 9001 HIGHER-LEVEL QUALITY STANDARD. FAR 52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT and DLAD 52.246-9043 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (NON-MANUFACTURERS) APPLY.

DFARS Provision 252.213-7000 Notice to Prospective Suppliers on Use of Past Performance Information Retrieval System— Statistical Reporting in Past Performance Evaluation

Procurement Note L08 - Use of Past Performance Information Retrieval System—Statistical Reporting in Past Performance Evaluations

The following DLA Aviation Notices are incorporated by reference. The full-text of the notices can be found at:

http://www.dla.mil/Aviation/Business/IndustryResources/DLAResourcesforSuppliers/DAANs.aspx

DAAN-13-01 Evaluation and Award for Acquisitions Below the Simplified Acquisition Threshold (September 2016)

(b) Relative Important and Trade-offs. The Government will base the determination of best value on a comparative assessment of the quoters' prices, past performance, and the other evaluation factors identified elsewhere in this solicitation. The determination of best value also considers the relative importance of the evaluation factors. All evaluation factors, when combined, are:

[ ] significantly more important than cost or price.

As other evaluation factors become more equal, the evaluated cost or price becomes more important.

[ ] approximately equal to cost or price; or

[ ] significantly less important than cost or price.

As the evaluated cost/price becomes more equal, relative importance of all other evaluation factors becomes more significant.

(e) Past Performance Evaluation Factors. The Government will use the past performance evaluation factors marked below in addition to cost or price and other evaluation factors specified in the solicitation. Unless indicated otherwise, past performance is significantly more important than other non-price factors. Within the past performance subfactors, PPIRS assessments (as applicable) will be weighed most heavily. Historical quality history and delivery schedule compliance (not captured in PPIRS) will be weighed more heavily than the remaining past performance subfactors. All other non-price evaluation factors specified in this solicitation weigh equally, unless otherwise indicated.

[ X ] PPIRS-SR Assessments (52.215-9003) (EProcurement) [ ] PPIRS-RC Assessments [ ] Historical Quality (not captured in PPIRS) [ ] Historical Delivery Schedule Compliance (not captured in PPIRS) [ ] Other (specify):

(End of Notice)

DANN-13-01 (ALT I) Evaluation and Award for Acquisitions Below the Simplified Threshold (ALT I) (September 2016)

(b) Non-Price Factors. Quoted delivery and past performance will be evaluated equally, unless indicated otherwise

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 27 PAGES

CONTINUED ON NEXT PAGE

below.

( ) Quoted delivery is weighed more heavily than past performance.

( ) Past Performance is weighed more heavily than quoted delivery.

(End of Notice)

DAAN-13-02 Notification of Rejection of Unilateral Award (September 2016)

DAAN-15-02, Offer Submission Methods

DAAN-13-04, Master Solicitation with Additional Clauses (January 2017)

DAAN-47-01 Transportation Account Codes (TACs) for FOB Origin Vendor Shipments (March 2017)

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion. If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

This solicitation is being issued under the First Destination Transportation (FDT) program. If this acquisition is for Foreign Military Sales (FMS) or has an APO/FPO ship-to address, FDT will not apply and normal procedures should be followed. For FDT program transportation requirements, see DLAD clauses 52.247-9059 F.O.B. Origin, Government Arranged Transportation and 52.247-9058, First Destination Transportation (FDT) Program – Shipments Originating Outside the contiguous United States (OCONUS). Additional information about FDT can be found at:

http://www.dla.mil/LandandMaritime/Business/Selling/DLALandandMaritimeProcurementInitiatives/FDTPI.aspx

Export Control Applies:

Drawing package cited is subject to export control regulations and distribution is limited to those contractors qualified through JCP certification. To apply for certification, complete DD form 2345, “Military Critical Technical Data Agreement.” Form is available at the world wide web address http://www.dlis.dla.mil/jcp or by writing to:

UNITED STATES/CANADA JOINT CERTIFICATION OFFICE

DEFENSE LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE, NORTH

BATTLE CREEK, MI 49017-3084

Contracts will be awarded only to those contractors with JCP Certification issued prior to an award.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: 1560-00-885-8031

ITEM DESCRIPTION:

PANEL, STRUCTURAL, AIRCRAFT

DWG: 34-1276<(>,<)> DASH NO -523; ENGR. NOTES: 1-25,39,40

DWG: PL34-1276<(>,<)> DASH -523; ENGR NOTES: 1-25,39,40

DWG: 36-2152<(>,<)> ENGR. NOTES: 2-5,22,26,40

AIA/NAS NAS 40<(>,<)> DASH NOS -6ALL-2.5, -6ATT-2.5

AIA/NAS NAS 517<(>,<)> DASH NOS -2-1, -3-2

EXCEPTIONS DATA:

1. CONTRACT AWARD MANUFACTURER MUST OBTAIN BONDING FROM AN APPROVED

SOURCE LISTED ON AIR FORCE DRAWING NUMBER 9485265, ATTACHED TO THIS

TECHNICAL DATA PACKAGE. QUALIFICATION OF BONDING SOURCES/FACILITIES ARE

CONTROLLED BY THE B-52 ENGINEERING OFFICE, OC-ALC, TINKER AFB, OK 73145.

2. PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND

BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

3. DELETE REFERENCE TO 2-5000 OR D2-5000, BAC 5005 AND 520-13566.

4. DIMENSIONS AND TOLERANCES PER ASME Y14.5 IN LIEU OF MIL-STD-8 / ANSI

Y14.5.

5. SURFACE TEXTURE PER ASME B46.1 IN LIEU OF BACD 2097.

6. PART TO BE FURNISHED WITHOUT FASTENER HOLES EXCEPT THOSE REQUIRED FOR

ASSEMBLY.

7. ADD 0.50 INCH EXCESS TRIM ALLOWANCE TO ALL EXTERIOR EDGES OF PANEL

(EXCEPT TRAILING EDGE ASSEMBLIES).

8. ALL BONDED ASSEMBLIES SHALL BE INSPECTED FOR INTERNAL FLAWS SUCH AS

VOIDS, BLISTERS, AND DELAMINATIONS WITH THE AID OF NDI INSTRUMENTS IN

ACCORDANCE WITH BAC 5968, TYPE I, II, OR III.

9. FINISH CODE F-12.37 DEFINED: APPLY MIL-PRF-23377, TYPE I, CLASS C2

PRIMER TO A MINIMUM DRY FILM THICKNESS OF 0.0006 INCH ACCORDING TO THE

MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264.

10. USE BAC 5514, BAC 5514-5137 AND BMS 5-137 IN LIEU OF BAC 5514-542

AND BMS 5-42 OR BAC 5425 AND BMS 5-15.

11. FOR STRUCTURAL ADHESIVE BONDING PHOSPHORIC ACID ANODIZE ACCORDING TO

BAC 5555, OPTIONAL SAE ARP 1524.

12. USE ASTM D4376 IN LIEU OF SAE AMS-T-81533 TRICHLOROETHANE 1,1,1.

13. USE D-16122 IN LIEU OF D-17318.

14. USE BMS 5-17 AND D520-12836-1 IN LIEU OF BMS 5-20.

15. APPLY HT-424F ADHESIVE PRIMER TO ALL SURFACES TO BE BONDED WITH

HT-424 ADHESIVE PER BMS 5-17.

16. USE BMS 5-137 IN LIEU OF BMS 5-15, BMS 5-40, BMS 5-70 AND BMS 5-71.

17. USE BMS 5-95 IN LIEU OF BMS 5-19 AND BMS 5-44.

18. USE SAE AMS 3374 AND SAE AMS 3374/1 IN LIEU OF BMS 5-22 AND/OR

MIL-S-38249.

19. USE BAC 5514, BAC 5514-590 AND BMS 5-90, TYPE III OR TYPE IV IN LIEU

OF BAC 5452, BAC 5457 AND BMS 8-30, TYPE II (BAC FOAM 307 TYPE II).

20. USE NAPHTHA PER TT-N-95 IN LIEU OF BMS 3-2.

21. HEAT TREAT ALUMINUM ALLOY PER SAE AMS 2770 AND AMS SAE 2772 IN LIEU

OF MIL-H-6088 AND/OR BAC 5602.

22. FINISH CODE F-2.10 DEFINED: APPLY NO FINISH, EXCEPT THAT TEMPORARY

PROTECTION MAY BE APPLIED FOR TRANSPORTATION, HANDLING, AND STORAGE.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 27 PAGES

CONTINUED ON NEXT PAGE

SUPPLY/SERVICE: 1560-00-885-8031 CONT'D

23. USE MS20604B3W1 UNIVERSAL HEAD BLIND RIVETS PER AIA/NAS NASM20604 IN

LIEU OF

BACR15K-127-3-2.

24. USE MS20426 COUNTERSUNK RIVETS PER AIA/NAS NASM20426 IN LIEU OF

AN426.

25. USE ELECTRICAL BONDING AND GROUNDING PER MIL-STD-464 OR BAC 5117-7

IN LIEU OF BAC 5100.

26. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/12 ALUMINUM ALLOY 7075-T6

PLATE/SHEET IN LIEU OF QQ-A-287.

27. USE FINISH CODE F-12.57 IN LIEU OF FINISH CODE F-12.91.

28. DISRGARD REFERENCE TO STENCIL MARKINGS.

29. FINISH CODE F-2.115/F-2.30 DEFINED: CHEMICAL TREAT ACCORDING TO

MIL-DTL-5541, CLASS 1A OR ANODIZE ACCORDING TO MIL-A-8625, TYPE I OR IC

(PREFERRED), CLASS 1. APPLY MIL-PRF-23377, TYPE I, CLASS C2 PRIMER TO A

DRY FILM THICKNESS OF 0.0003 TO 0.0005 INCH ACCORDING TO THE

MANUFACTURERS APPLICATION INSTRUCTIONS AND MIL-F-18264.

30. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/4 ALUMINUM ALLOY 2024-T3

PLATE/SHEET IN LIEU OF QQ-A-362.

31. USE MS20253-2-80 HINGE PIN PER SAE AS20253 IN LIEU OF AN253-2-80.

32. USE MIL-DTL-83413/6 FOR GROUNDING RECEPTACLE, IN LIEU OF AN3117-1.

33. INSTALL GROUNDING RECEPTACLE PER MIL-DTL-83413 AND MIL-C-83413/6 IN

LIEU OF FLAG NOTE 2.

34. USE MS20470 UNIVERSAL HEAD RIVETS PER AIA/NAS NASM20470 IN LIEU OF

AN470.

35. USE STEEL WIRE PER ASTM A228/A228M IN LIEU OF QQ-W-470.

36. FINISH CODE F-1.20 DEFINED: CADMIUM PLATE SPRINGS TO MEET THE

REQUIREMENTS OF SAE AMS-QQ-P-416, TYPE II, CLASS 2 AND BAKE 8 HOURS AT

375 ± 25 F AFTER PLATING. DO NOT FLEX SPRINGS PRIOR TO BAKING.

37. USE MIL-PRF-6855 RUBBER IN LIEU OF MIL-R-6855 AND MIL-A-7021.

38. FINISH CODE F-7.10 DEFINED: APPLY NO FINISH.

39. MAJOR CHARACTERISTICS:

A. HONEYCOMB CORE DIRECTION

B. PHOSPHORIC ACID ANODIZE PER BAC 5555 OR SAE ARP 1524

C. ULTRASONIC INSPECTION PER BAC 5968

D. BONDING REQUIREMENTS PER BAC 5514

ADDITIONAL ENGINEERING NOTES:

THE USE OF BMS5-137 ILO BMS5-17 HAS BEEN APPROVED BASED ON THE ESA

EVALUATION OF THE TWO ADHESIVES. CONCLUSION: THE BMS 5-137 SYSTEM IS A

SUPERIOR SYSTEM TO THE BMS 5-17 ADHESIVE SYSTEM. THE BMS 5-137 MEETS

AND, IN MOST CASES, EXCEED THE KEY VALUES AND IS TOUGHENED TO PROVIDE

LONG TERM DURABILITY AND FATIGUE RESISTANCE. BASED ON THE ABOVE

EVALUATION OF THE TWO ADHESIVE SYSTEMS, B-52 SPO RECOMMENDS USING BMS

5-137 PRIMER AND SUPPORTED FILM ADHESIVE ON THE SUBJECT B-52 ACCESS DOOR

ASSEMBLY IN LIEU OF THE BMS 5-17 ADHESIVE SYSTEM.

40. WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE

TO THIS PRODUCT ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: AN ITEM, WHICH REQUIRES SPECIAL

MANUFACTURING PROCESSES, CONTROLS, AND TESTING OF MATERIAL OR END ITEMS.

BECAUSE OF ITS USE OR APPLICATION, FAILURE TO MAINTAIN THE HIGHEST

RELIABILITY OF SUCH AN ITEM COULD BE CATASTROPHIC RESULTING IN LOSS OF

LIFE OR SERIOUS INJURY, LOSS OF A WEAPON SYSTEM OR EXTENSIVE SECONDARY

DAMAGE, WITH DIRECT IMPACT ON THE CAPABILITY TO RESPOND TO A NATIONAL

EMERGENCY OR TO ACHIEVE WARTIME SUSTAINABILITY.

(B) CRITICAL CHARACTERISTICS: CHARACTERISTICS WHICH, WHEN DEFECTIVE, ARE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-00-885-8031 CONT'D

LIKELY TO RESULT IN HAZARDOUS OR UNSAFE CONDITIONS FOR INDIVIDUALS

USING, MAINTAINING OR DEPENDING UPON THE PRODUCT; OR, ARE LIKELY TO

PREVENT PERFORMANCE OF THE TACTICAL FUNCTION OF A MAJOR END ITEM SUCH AS

AN AIRCRAFT, MISSILE, SPACE VEHICLE, ENGINE OR A MAJOR PART THEREOF.

(DERIVED FROM MIL-STD-1916).

(C) MAJOR CHARACTERISTICS: CHARACTERISTICS (OTHER THAN CRITICAL OR

MINOR) WHICH, WHEN DEFECTIVE, ARE LIKELY TO RESULT IN FAILURE OR TO

REDUCE THE USABILITY OF THE PRODUCT OR A MAJOR END ITEM FOR ITS INTENDED

PURPOSE. (DERIVED FROM MIL-STD-1916).

(D) MINOR CHARACTERISTICS: ALL CHARACTERISTICS NOT DESIGNATED AS

CRITICAL OR MAJOR BUT FOR WHICH FULL CONFORMITY IS REQUIRED.

(E) COMPLEX: ITEMS HAVING QUALITY CHARACTERISTICS NOT WHOLLY VISIBLE

(HIDDEN CHARACTERISTICS), IN THE END PRODUCT FOR WHICH CONTRACTUAL

CONFORMANCE MUST BE ESTABLISHED PROGRESSIVELY THROUGH PRECISE

MEASUREMENTS, TESTS OR CONTROLS APPLIED DURING PURCHASING,

MANUFACTURING, PERFORMANCE, ASSEMBLY AND FUNCTIONAL OPERATION EITHER AS

AN INDIVIDUAL ITEM OR IN CONJUNCTION WITH OTHER ITEMS [FAR SUBPART

46.203(B)].

(F) COMMERCIAL: DESCRIBED IN COMMERCIAL CATALOGS, DRAWINGS OR INDUSTRIAL

STANDARDS [FAR SUBPART 46.203(A), (1)].

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW):

( ) ENGINEERING CRITICAL IN APPLICATION

( ) CRITICAL CHARACTERISTICS

(X) MAJOR CHARACTERISTICS

(X) MINOR CHARACTERISTICS, ALL EXCEPTING CRITICAL AND MAJOR

( ) COMPLEX

( ) AVAILABLE AS A COMMERCIAL PRODUCT

WHEN MATERIALS, PROCESSES OR COMPONENTS ARE TO BE OBTAINED FROM DIRECTED

SOURCES AS INDICATED HEREIN OR IN THE SPECIFICATIONS, ALTERNATE SOURCES

MAY ONLY BE UTILIZED UPON PRIOR APPROVAL BY THE CONTRACTING OFFICER OF

THIS PROCURING ACTIVITY AS A DEVIATION.

BIDDERS SHALL NOTIFY THIS PROCURING ACTIVITY AT THE TIME OF QUOTATION OF

ANY DRAWING, SPECIFICATION OR STANDARD WHICH IS OF MORE CURRENT DATA

REVISION THAN THOSE SHOWN ON THE DATA LISTING OR IN THESE ENGINEERING

NOTES. DETERMINATION OF ACCEPTABILITY OF THE MORE CURRENTLY DATED DATA

WILL BE MADE BY THE RESPONSIBLE ENGINEERING OFFICE OF THIS PROCURING

ACTIVITY.

LOWER TIER SPECIFICATIONS LISTED IN OR REFERENCED BY FIRST TIER

SPECIFICATIONS MAY NOT BE SHOWN ON THE DATA LISTS OR ENGINEERING NOTES

ACCOMPANYING THIS CONTRACT BUT ARE NONETHELESS REQUIRED BY THIS CONTRACT

FOR COMPLIANCE. EXCEPTIONS WOULD OCCUR ONLY WHEN SUCH LOWER TIER

REQUIREMENTS HAVE BEEN SPECIFICALLY WAIVED OR SUBSTITUTE

SPECIFICATIONS/REQUIREMENTS ARE DESIGNATED HEREIN.

REPORTS, PROCESS SHEETS, INSPECTION METHODS SHEETS AND ALL OTHER

DOCUMENTS REQUIRED BY SPECIFICATIONS IMPOSED BY THIS CONTRACT FOR

CONTRACTOR COMPLIANCE WHICH WERE PREVIOUSLY REQUIRED TO BE SUBMITTED TO

A PRIME DESIGN CONTRACTOR SHALL BE HELD AT THAT FACILITY FOR REVIEW BY

GOVERNMENT PERSONNEL. WHEN PRIME DESIGN SOURCE SPECIFICATIONS REQUIRE OR

PROVIDE FOR PARTICIPATION BY THAT PRIME SOURCE QUALITY, MANUFACTURING,

LABORATORY OR ENGINEERING SUPPORT SERVICES, THESE REQUIREMENTS OR

PROVISIONS DO NOT APPLY WHEN THE CONTRACT WAS ISSUED BY THIS PROCURING

ACTIVITY. FOR THESE SERVICES OR DIRECTION PERTAINING THERETO, CONTACT

THE GOVERNMENT CONTRACT ADMINISTRATION OFFICE OR THIS PROCURING ACTIVITY

FOR ASSISTANCE.

THE CONTRACTOR IS RESPONSIBLE FOR ASSURING THAT ALL DIMENSIONS,

CONDITIONS, TESTS AND TEST RESULTS IDENTIFIED IN THESE ENGINEERING

NOTES, APPLICABLE DRAWINGS, SPECIFICATIONS AND CONTRACT QUALITY

REQUIREMENTS ARE MET BY THEMSELVES AND THEIR SUPPLIERS. THIS REQUIREMENT

APPLIES TO ALL CHARACTERISTICS WHETHER THOSE CHARACTERISTICS HAVE BEEN

SPECIFICALLY DESIGNED AS BEING CRITICAL, MAJOR OR ARE THOSE MINOR

CHARACTERISTICS NOT SPECIFICALLY DESIGNATED AS SUCH.

PROCESS DATA REQUIREMENTS (CHECK WHEN APPLICABLE)

( ) PRIOR TO BEGINNING OF MANUFACTURE, THE CONTRACTOR WILL NOTIFY THE

ENGINEERING OFFICE OF THIS PROCURING ACTIVITY OF ALL MANUFACTURING

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-00-885-8031 CONT'D

PROCESS AND PROCESSING PROCEDURES INTENDED FOR USE IN PRODUCTION OF THIS

PRODUCT. ONCE THESE PROCESSES ARE ESTABLISHED, NO CHANGES SHALL BE MADE

WITHOUT PRIOR APPROVAL OF THE ENGINEERING OFFICE OF THIS PROCURING

ACTIVITY.

( ) SERIALIZATION OF PARTS (CHECK WHEN APPLICABLE)

SERIALIZATION OF EACH PART/ASSEMBLY (CONTRACT END ITEM) IS REQUIRED.

STABLE BASE DRAWINGS: (CHECK WHEN APPLICABLE)

(X) WHEN THE USE OF STABLE BASE DRAWINGS IS REQUIRED, THE FOLLOWING

SHALL APPLY:

A. STABILIZE BY ALLOWING THE STABLE BASE DRAWING TO REST FLAT AND

UNRESTRAINED ON A FLAT SURFACE OVERNIGHT AT ROOM TEMPERATURE PRIOR TO

USE.

B. DO NOT STRETCH OR OTHERWISE APPLY STRESS.

C. CHECK THE DIMENSIONAL ACCURACY OF THE GRID LINES. THE DIMENSION

BETWEEN ADJACENT GRID LINES MUST BE WITHIN ? .005 INCH. THE GRID LINES

SHALL BE MEASURED VERTICALLY, HORIZONTALLY AND DIAGONALLY, TO INSURE

THAT THE GRIDS ARE WITHIN A TOLERANCE OF ? .005 INCH. THE TOLERANCE IS

ACCUMULATED OVER THE LENGTH AND WIDTH OF THE STABLE BASE DRAWING.

D. TRAMMEL POINTS SHALL BE MEASURED TO WITHIN .010

E. WHEN ROLLING STABLE BASE DRAWINGS, DO NOT ROLL LESS THAN 3 INCHES IN

DIAMETER.

F. IF THE ABOVE TOLERANCE POINTS PROVE TO BE INACCURATE, RECORD THE

DISCREPANCIES IMMEDIATELY AND NOTIFY IN WRITING. OC-ALC/PKXDA AND THE

ADMINISTRATIVE CONTRACTING OFFICER (ACO).

RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED

COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE

OFFICE.REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND

DOCUMENTS:

THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305 AND OR

L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE PROCESSES AND

OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS, SPECIFICATIONS AND

DOCUMENTS.

THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH

MIL SPEC, MIL STD, INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE

DATE OF THIS CONTRACT UNLESS OTHERWISE NOTED.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 27 PAGES

CONTINUED ON NEXT PAGE

RT001: MEASURING AND TEST EQUIPMENT

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE

TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN

THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR

HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),

THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM

DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON

STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS

OF THE UNDIMENSIONED DRAWING.

THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR

DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE

DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE

INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND

(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)

0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH

DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO

WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.

REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.

CRITICAL APPLICATION ITEM

NORDAM GROUP, INC., THE DBA 29957 P/N 34-1276-523

THE BOEING COMPANY DBA BOEING 81205 P/N 34-1276-523

ROHR, Inc DBA UTC AEROSPACE 51563 P/N 34-1276-523

CYNTHIA GARCIA DBA AERO SPACE 0JWH9 P/N 34-1276-523

PRATT & WHITNEY H A C INC 1N454 P/N 34-1276-523

AIRBORNE SUPPLY 65088 P/N 34-1276-523

LIMCO AIREPAIR INC. 16630 P/N 34-1276-523

Triumph Fabrications - Fort Worth, 32818 P/N 34-1276-523

HEXCEL CORPORATION DBA 12794 P/N 34-1276-523

BONDED TECHNOLOGY INC. SUB OF 015P0 P/N 34-1276-523

Kaman Composites - Wichita, Inc 96145 P/N 34-1276-523 Honeycomb Company of America, Inc. 99115 P/N 34-1276-523 Magellan Aerospace, Middletown, 80512 P/N 34-1276-523 Helicomb International, Inc. DBA 6W159 P/N 34-1276-523

IAW REFERENCE DRAWING NR 81205 BAC5968

REVISION NR C DTD 07/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 3-59473

REVISION NR G DTD 11/25/1958

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 3-59474

REVISION NR H DTD 01/04/1963

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 3-61309

REVISION NR J DTD 05/11/1955

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 36-2152

REVISION NR DTD 05/28/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 39-3398

REVISION NR B DTD 04/02/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98748 9485265

REVISION NR A DTD 05/22/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 11/22/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 01/17/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5010

REVISION NR Y DTD 06/30/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5010

REVISION NR W DTD 10/30/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5430

REVISION NR M DTD 01/08/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514

REVISION NR AP DTD 05/01/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514

REVISION NR AP DTD 09/10/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-590

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-00-885-8031 CONT'D

REVISION NR P DTD 07/03/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5555

REVISION NR T DTD 02/16/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 6-42828

REVISION NR G DTD 06/02/1965

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS4-4Y

REVISION NR Y DTD 05/07/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-17G

REVISION NR G DTD 09/28/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS4-4Y

REVISION NR B DTD 06/04/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 D3-1453

REVISION NR AL DTD 10/21/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D-16925

REVISION NR BF DTD 03/24/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D3-1444

REVISION NR A DTD 10/23/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5018

REVISION NR L DTD 12/07/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-95R

REVISION NR A DTD 01/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AB DTD 06/22/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 12/05/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5555

REVISION NR T DTD 04/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-3

REVISION NR J DTD 01/13/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1276

REVISION NR G DTD 10/26/2017

PART PIECE NUMBER: 34-1276-523

IAW REFERENCE DRAWING NR 81205 D-16122

REVISION NR G DTD 06/04/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-5137

REVISION NR K DTD 02/15/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-5137

REVISION NR K DTD 11/03/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5514-590

REVISION NR P DTD 01/16/1997

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-00-885-8031 CONT'D

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 36-2152/1

REVISION NR DTD 05/28/1957

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 39-3398/1

REVISION NR B DTD 04/02/1962

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 04/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 10/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-90V

REVISION NR V DTD 12/20/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5968

REVISION NR C DTD 07/01/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 05/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 03/04/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D-16925

REVISION NR BF DTD 11/06/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 D520-12836-1

REVISION NR C DTD 06/02/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1276/3

REVISION NR D DTD 06/18/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-137L

REVISION NR L DTD 05/12/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-3

REVISION NR J DTD 05/12/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-137L

REVISION NR DTD 05/12/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5117

REVISION NR AE DTD 07/20/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 34-1276

REVISION NR G DTD 06/21/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5117-7

REVISION NR F DTD 03/20/2012

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 27 PAGES

CONTINUED ON NEXT PAGE

IAW REFERENCE DRAWING NR 81205 34-1276/2

REVISION NR C DTD 08/22/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS5-95R

REVISION NR R DTD 06/20/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 09/01/2006

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1560-00-885-8031 19.000 EA $ ________________ $ ________________

PANEL,STRUCTURAL

,AI

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 300 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-00-885-8031 CONT'D

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

SW3211

DLA DISTRIBUTION DEPOT OKLAHOMA

3301 F AVE CEN REC BLDG 506 DR 22

TINKER AFB OK 73145-8000

US

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0073311929 0001 N/A N/A N/A 07/28/2019

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 27 PAGES

CONTINUED ON NEXT PAGE

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C04 UNUSED FORMER GOVERNMENT SURPLUS PROPERTY (DEC 2016)

To be considered for award, the offeror must complete and submit the following representation with their offer. Additional supporting documentation to demonstrate the surplus material offered was previously owned by the Government and meets solicitation requirements must be provided within 24 hours of request by the contracting officer.

(1) The material is new, unused, and not of such age or so deteriorated as to impair its usefulness or safety. Yes [ ] No [ ]

The material conforms to the technical requirements cited in the solicitation (e.g., Commercial and Government Entity (CAGE) Code and part number, specification, etc.). Yes [ ] No [ ] The material conforms to the revision letter/number, if any is cited. Yes [ ] No [ ] Unknown [ ] If No, the revision does not affect form, fit, function, or interface. Yes[ ] No [ ] Unknown [ ] The material was manufactured by:

(Name):

(Address):

(2) The offeror currently possesses the material Yes [ ] No [ ]

If yes, the offeror purchased the material from a Government selling agency or other source.

Yes [ ] No [ ] If yes, provide the following:

Government Selling Agency:

Contract Number:

Contract Date: (Month, Year):

Other Source:

Address:

Date Acquired: (Month/Year)

(3) The material has been altered or modified. Yes [ ] No [ ]

If Yes, the offeror must provide the name of the company that performed the alteration or modification and attach or forward to the contracting officer a complete description of the alterations or modifications.

(4) The material has been reconditioned. Yes [ ] No [ ]

If Yes, (i) the price offered includes the cost of reconditioning /refurbishment. Yes [ ] No [ ] ; and (ii) the offeror must provide information on the company that reconditioned the material with the certifications and attach or forward to the contracting officer a complete description of any work done or to be done, including the components to be replaced and the applicable rebuild standard. The material contains cure-dated components. Yes [ ] No [ ]

If Yes, (i) the price includes replacement of cure-dated components. Yes [ ] No [ ] ; and (ii) provide cure date to the contracting officer.

5) The material has data plates attached. Yes [ ] No [ ]

If Yes, the offeror must state below all information contained thereon, or forward a copy or facsimile of the data plate to the contracting officer.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 27 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

(6) The offered material is in its original package. Yes [ ] No [ ]

If Yes, the offeror has stated below all original markings and data cited on the package; or has attached or forwarded to the contracting officer a copy or facsimile of original package markings:

Contract Number

NSN

CAGE Code

Part Number

Other Markings/Data

(7) The offeror has supplied this same material (National Stock Number) to the Government before. Yes [ ] No [ ]

If Yes, (i) the material being offered is from the same original Government contract number as that provided previously. Yes [ ] No [ ] ; and

(ii) state below the Government Agency and contract number under which the material was previously provided:

Agency

Contract Number

(8) The material is manufactured in accordance with a specification or drawing. Yes [ ] No [ ]

If Yes, (i) the specification/drawing is in the possession of the offeror. Yes [ ] No [ ] ; and (ii) the offeror has stated the applicable information below, or forwarded a copy or facsimile to the contracting officer. Yes [ ] No [ ]

Specification/Drawing Number

Revision (if any)

Date

(9) The material has been inspected for correct part number and for absence of corrosion or any obvious defects. Yes [ ] No [ ]

If Yes, (i) material has been re-preserved. Yes [ ] No [ ] ; (ii) material has been repackaged. Yes [ ] No [ ] ; (iii) percentage of material that has been inspected is %; and/or (iv) number of items inspected is ; and (v) a written report was prepared. Yes [ ] No [ ] ; and if Yes, the offeror has attached the written report or forwarded it to the contracting officer. Yes[ ] No[ ]

The offeror agrees that in the event of award and notwithstanding the provisions of the solicitation, Inspection and acceptance of the surplus material will be performed at source or destination subject to all applicable provisions for source or destination inspection.

The offeror has attached or forwarded to the contracting officer one of the following, to demonstrate that the material being offered was previously owned by the Government (offeror check which one applies):

[ ] For national or local sales, conducted by sealed bid, spot bid or auction methods, a solicitation/Invitation For Bid and corresponding DLA Disposition Services Form 1427, Notice of Award, Statement and Release Document.

[ ] For DLA Disposition Services Commercial Venture (CV) Sales, the shipment receipt/delivery pass document and invoices/receipts used by the original purchaser to resell the material.

[ ] When the above documents are not available, or if they do not identify the specific NSN being acquired, a copy or facsimile of all original package markings and data, including NSN, commercial and Government entity (CAGE) code and part number, and original contract number.

(This information has already been provided in paragraph (c)(6) of this clause. Yes [ ] No [ ] .)

[ ] When none of the above are available, other information to demonstrate that the offered material was previously owned by the Government. Describe and/or attach.

This only applies to offers of Government surplus material. Offers of commercial surplus, manufacturer's overruns, residual inventory resulting from terminated Government contracts, and any other material that meets the technical requirements in the solicitation but was not previously owned by the Government will be evaluated in accordance with the DLAD procurement note L04, Offers for Part Numbered Items.

If requested by the contracting officer, the offeror shall furnish sample units, in the number specified, to the contracting officer or to another location specified by the contracting officer, within 10 days after the contracting officer's request. The samples will be furnished at no cost to the Government. All such samples not destroyed in evaluation will be returned at the offeror's expense. The samples will be evaluated for form, fit, and function with subassembly, assembly, or equipment with which the items are to be used. End items furnished under any contract award to the offeror furnishing the samples can include the returned samples, and all acceptable end items will have a configuration identical to the samples. If specific tests of the samples' performance are made by the Government, the offeror will be furnished the results of such tests prior

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 27 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

to a contract being entered into. In addition to any other inspection examinations and tests required by the contract, the performance of the end items will be required to be as good as that of the samples submitted.

In the event of award, the contractor will be responsible for providing material that is in full compliance with all requirements in the contract or order. The surplus material to be furnished must meet the requirements of the current contract or order, whether or not the material met Government requirements in existence at the time the material was initially manufactured or sold to the Government. If higher-level contract quality requirements apply to the material being acquired, those requirements do not apply to surplus material furnished under this contract.

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

SECTION D - PACKAGING AND MARKING

252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (JUN 2016) DFARS

As prescribed in 211.275-3, use the following clause:

(a) Definitions. As used in this clause --

“Advance shipment notice” means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

“Bulk commodities” means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

“Case” means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

“Electronic Product Code™ (EPC)” means an identification scheme for universally identifying physical objects via RFID tags and other means.

The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user-defined data. The EPC Tag Data Standards will define the length and position of this data, without defining its content.

“EPCglobal®” means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

“Exterior container” means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

“Palletized unit load” means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

“Passive RFID tag” means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags file:///C:/Users/RJ30041/AppData/Local/Temp/&#xD;Temp2_dfars_html%20(1).zip/dfars_html/211_2.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 27 PAGES

SECTION D - PACKAGING AND MARKING (CONTINUED)

CONTINUED ON NEXT PAGE

that meet the EPCglobal™ Class 1 Generation 2 standard.

“Radio frequency identification (RFID)” means an automatic identification and data capture technology comprising one or more reader/ interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

“Shipping container” means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that --

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I - Packaged operational rations.

(B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP - Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV - Construction and barrier materials.

(E) Class VI - Personal demand items (non-military sales items).

(F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents - suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX - Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/sci/RFID_ship-to_locations.html or to --

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to --

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number Location Name City State DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures.

(c) The Contractor shall --

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in…