SPE4A718Q0528.PDF

PDF 396 KB Posted May 7, 2018

Attached to: RADOME Federal contract opportunity
Solicitation number: SPE4A718Q0528
Issued by: Defense Logistics Agency Aviation

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE4A7-18-Q-0528

2. DATE ISSUED

2018 JAN 11

3. REQUISITION/PURCHASE REQUEST NO.

0072416991

RATING

DO-C9

DLA AVIATION

ASC SUPPLIER OPER AE AND AF DIV

8000 JEFFERSON DAVIS HWY

RICHMOND VA 23297

USA

Buyer: Zareya Carlisle DZC0005 Tel: 804-279-6285 Email: Zareya.Carlisle@dla.mil

6. DELIVER BY (Date)

323 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 JAN 25

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 30 PAGES

SPE4A7-18-Q-0528

CONTINUED ON NEXT PAGE

THE FOLLOWING DLA AVAITION NOTICES ARE IN CORPORATED BY REFERENCE. THE FULL-TEXT OF THE NOTICES CAN BE FOUND AT:

http://www.dla.mil/Aviation/Business/IndustryResources/DLAResourcesforSuppliers/DAANs.aspx

DAAN-09-06 Critical Safety Items DAAN-09-01 National Stock Number (NSN) Identification of First Article Testing DAAN-09-04 First Article Testing (Government)

Government First Article Test (FAT)

1 EACH = 1 FAT

Number of units to be tested: 1 Disposal of FAT units: 05 DELIVER PART OF PROD QTY

For Testing:

Inspection: Origin Ship To (Lab DoDAAC): FB2029 Acceptance (Issuing Activity DoDAAC): SPE4A7 FOB: Destination

Delivery Schedule:

202 Days ARO: Delivery of FAT Exhibits 110 Days: Government Evaluation and Notification to Contractor 323 Days: Completion of Production Units 635 Total Days ARO

DAAN-13-01 Evaluation and Award for Acquisitions Below the Simplified Acquisition Threshold

(a) AWARD. The Government intends to evaluate quotations. The award will be made to the quoter whose quote conforms to the terms and conditions of the solicitation and represents the best value to the Government. Therefore, award may be made to other than the lowest priced or the highest technically rated quote.

(b) RELATIVE IMPORTANCE AND TRADE-OFFS. The Government will base the determination of best value on a comparative assessment of the quoters' prices, past performance, and the other evaluation factors identified elsewhere in this solicitation. The determination of best value also considers the relative importance of the evaluation factors. All evaluation factors, when combined, are:

[ ] significantly more important than cost or price. As other evaluation factors become more equal, the evaluated cost or price becomes more important.

[ x] approximately equal to cost or price; or

[ ] significantly less important than cost or price. As the evaluated cost/price becomes more equal, relative importance of all other evaluation factors becomes more significant.

The final award decision may involve a trade-off among cost or price and the non-price factors. Factors that may be considered in the trade-off process include, but are not limited to:

•Item criticality and weapons system application •Current inventory status •Historical delivery or quality problems •Concerns over limited supply sources and industrial base •Benefits from obtaining new sources

(c) COST OR PRICE. The Government will evaluate the quoted cost or price. The Government will add any other cost or price evaluation factors identified elsewhere in this solicitation (e.g., Buy American Act or FOB Origin transportation costs) to arrive at the quoter's evaluated cost or price. The evaluated cost or price will be used in conjunction with the other non-price factors to determine the best value to the Government.

(d) PAST PERFORMANCE. Past performance includes, but is not limited to, the quoter's record of conforming to contract requirements and standards of good workmanship; adherence to contract schedules, including the administrative aspects of performance; the quoter's reputation for reasonable and cooperative behavior and commitment to customer satisfaction; and generally, the quoter's business-like concern for the customer's interest.

(i) The Past Performance Information Retrieval System – Statistical Reporting (PPIRS-SR), as applicable, will be used to evaluate quality and past performance on DLA awards (refer to DFARS 252.213-7000).

(e) PAST PERFORMANCE EVALUATION FACTORS. The Government will use the past performance evaluation factors marked below in addition to cost or price and other evaluation factors specified in the solicitation. Unless indicated otherwise, past performance is significantly more important than other non-price factors. Within the past performance subfactors, PPIRS assessments (as applicable) will be weighed most heavily. Historical quality history and delivery schedule compliance (not captured in PPIRS) will be weighed more heavily than the remaining past performance subfactors. All other non-price evaluation factors specified in this solicitation weigh equally, unless otherwise indicated.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 30 PAGES

CONTINUED ON NEXT PAGE

[x ] PPIRS-SR Assessments (PROC NOTE L08) [ ] PPIRS-RC Assessments [ ] Historical Quality (not captured in PPIRS) [ ] Historical Delivery Schedule Compliance (not captured in

PPIRS)

[ ] Other (specify):

DAAN-13-01 (ALT I) Evaluation and Award for Acquisitions Below the Simplified Acquisition Threshold (Alternate I)

(a) Quoted Delivery. The Government will evaluate the quoter’s compliance with the delivery schedule specified in the solicitation. Quoting a greater number of days delivery than requested under the solicitation will result in the quote being evaluated less favorably than an a quote meeting the requested delivery schedule. There will be no evaluation preference for quoted delivery which is earlier than the requested delivery schedule.

(b) Non-Price Factors. Quoted delivery and past performance will be evaluated equally, unless indicated otherwise below.

( ) Quoted delivery is weighed more heavily than past performance.

( ) Past Performance is weighed more heavily than quoted delivery.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: 1560-01-444-6995

ITEM DESCRIPTION:

RADOME

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RT001: MEASURING AND TEST EQUIPMENT

OFFERORS NOT CITED AS ACCEPTABLE SOURCES IN THE

PURCHASE ORDER TEXT ARE REQUIRED TO

OBTAIN SOURCE APPROVAL FROM THE DESIGN CONTROL

ACTIVITY. SOURCE APPROVAL REQUESTS/TECHNICAL

DATA PACKAGES MUST BE SUBMITTED TO DSCR WITH

THE OFFER.

A BIDSET IS AVAILABLE AND MAY BE USED IN DEVELOPING A SOURCE APPROVAL

REQUEST PACKAGE FOR ENGINEERING SOURCE APPROVAL. A COPY OF THE BIDSET

CAN BE OBTAINED BY GOING TO THIS WEB SITE:

https://pcf1x.bsm.dla.mil/cfolders This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130.

DFARS 252.211-7003 clause applies.

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

A CLASSIFIED DOCUMENT IS INCLUDED IN THE

TECHNICAL DATA PACKAGE THAT SUPPORTS THIS

MATERIAL. CONTRACT AWARD FOR THIS ITEM IS

LIMITED TO THOSE CONTRACTORS THAT HAVE A

VALID AND CURRENT SECURITY CLASSIFICATION

LEVEL OF "SECRET" PRIOR TO AWARD. UPON AWARD

OF THE CONTRACT, THE CONTRACTING OFFICER WILL

ARRANGE FOR THE SECURE DISTRIBUTION OF THIS

CLASSIFIED DOCUMENT THROUGH THE DATA DISTRIBU-

TION OFFICE, DSCC-VTRD, COLUMBUS, OHIO.

Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer.

Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows:

A: Inspection at origin (Source) - Enter the DCMA office DODAAC listed on page 1 of the contract.

B: Acceptance by other - Enter the issue by office DODAAC listed on page 1 of the contract.

C: Ship to code - Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4).

FIRST ARTICLE TEST MARKING INSTRUCTIONS:

FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package.

FIRST ARTICLE EXHIBIT AND MATERIAL CERTIFICATIONS SHALL BE SENT TO:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

809 MXSS/MXDEB (DODAAC:FB2029) BLDG 849 DEAR JOHN BAY

HILL AFB, UT. 84056-5713

MARK FOR: FIRST ARTICLE INSPECTION AND TEST. DO NOT POST

FIRST ARTICLE TESTING INFORMATION:

FIRST ARTICLE TESTING WILL CONSIST OF BOTH CONTRACTOR TESTING AND

GOVERNMENT TESTING. CONTRACTOR TESTING TO CONSIST OF ALL TESTING

REQUIRED IN ACCORDANCE WITH REQUIRED SPECIFICATIONS, DRAWINGS, MYLARS,

AND TEST PLAN AS APPROVED BY USAF ENGINEERING. CONTRACTOR WILL THEN

SUMBIT THE TESTING REPORT, ALONG WITH THE TESTING ARTICLE, TO THE

GOVERNMENT FOR FINAL EVALUATION AND APPROVAL. ALL TESTING WILL CONFIRM

CONFORMANCE TO ALL DRAWINGS, MYLARS, AND SPECIFICATIONS, AND ALSO

CONSIST OF A FORM, FIT, AND FUNCTION TEST BY THE GOVERNMENT TESTING LAB.

ADDITIONAL FAT REQUIREMENTS:

First Article Testing (FAT) shall include verification to Lead-Free Mitigation Requirement for every electronic product which contains finishing or plating and solder: FAT must provide a microscopic visual inspection for Tin (Sn) whiskers and a material analysis inspection for pure Tin products or products that contains less than 3% Lead (Pb) by weight of finishing or plating. Solder must contain of an alloy of 63% Tin and 37% Lead. If Tin whiskers or pure Tin or less than 3% Pb by weight of product finishing and different alloys of solder are found, report the finding to ESA for mitigation decision.

Cognizant Engineer POC:

Robert Underwood/AFLCMC/WWMEM/801-586-7825

EXCEPTIONS:

1.0 THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU

OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS

SO INDICATED.

1.1. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND

DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY

SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT OO-ALC

ENGINEERING ACTIVITY.

1.2 16PR006 IS FURNISHED AS WELL AS IGES CONTOURS DATA 16VE902-1 FOR

MANUFACTURE.

2. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000

THAT APPLIES AIRCRAFT SOLDERING FOR ALL

SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAYBE USED IN LIEU OF MIL-STD-

2000 IF SPEC MEETS OR EXCEEDS MIL-STD-2000

2.1 USE OF TIN IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS: TO DATE,

NO TIN SOLDER OR COMPONENT FINISH FORMULATION HAS MATCHED THE

RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD TIN-LEADED SOLDERS

AND FINISHES. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE TIN

SOLDER OR COMPONENT FINISH REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC

EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE

DEFENSE (DOD)

WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY

STANDARDS PREVIOUSLY ESTABLISHED WITH

LEADED SOLDERS OR COMPONENT FINISH. FAILURE TO DO SO, COULD ADVERSELY

IMPACT THE PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING

NATIONAL SECURITY.

2.2 THE USE OF TIN SOLDER OR TIN FINISHED COMPONENTS W/O LEAD IN

MILITARY ELECTRONIC PRODUCTS IS CONSIDERED A FLIGHT SAFETY AND NATIONAL

SECURITY CONCERN. FOR THIS REASON THE CONTRACTOR SHALL NOTIFY THE DOD

WHEN TIN SOLDER OR TIN FINISHED COMPONENTS AND MANUFACTURING PROCESSES

ARE BEING CONSIDERED. THE CONTRACTOR

SHALL OBTAIN APPROVAL FROM THE DOD TECHNICAL POINT OF CONTACT (TPOC)

BEFORE PROCEEDING. AS PART OF SATISFACTORY COMPLIANCE WITH THE

REQUIREMENTS OF THIS CONTRACT, DOD REQUIRES NOTIFICATION, ON A NO-COST

BASIS, WHEN COMMERCIAL-OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL

COMPONENTS THAT CONTAIN TIN SOLDER OR TIN FINISHED COMPONENTS ARE

REQUIRED TO PRODUCE THE END-ITEM.

2.3 WHEN APPROVED TIN SOLDER OR TIN FINISHED COMPONENTS ARE PRODUCED,

THE CONTRACTOR SHALL USE INDUSTRY STANDARD IPC J-STD-609, "MARKING AND

LABELING OF COMPONENTS, PCBs AND PCBAs TO IDENTIFY LEAD (Pb), Pb-FREE

AND OTHER ATTRIBUTES# FOR IDENTIFICATION.

2.4 IF NO TIN SOLDER OR TIN FINISHED COTS OR ANY OTHER TIN FINISHED

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

ELECTRICAL OR ELECTRONICS COMPONENTS EXIST

IN THE MANUFACTURED END-ITEM, THE CONTRACTOR SHALL PROVIDE WRITTEN

CERTIFICATION OF COMPLIANCE AS A DELIVERABLE WITH THE CONTRACT.

3.0 USE FMS-3029 TYPE F 0.027 THICKNESS SHEET RUBBER WHICH COMES WITH

PSA ADHESIVE BACK #PEEL AND STICK#. FMS-3029 IS AVAILABLE FROM THE

SOURCES OF SUPPLY IN THE FQML-3029-10 INCLUDED IN THE ENGINEERING DATA

LIST (EDL). APPLY PER FPS-3040. SURFACE PREPERATION IS TO HAND SAND TO

REMOVE SURFACE GLOSS TAKING CAUTION NOT TO OVER SAND INTO THE FIBERGLASS

PLIES. REMOVE SANDING DEBRIS WITH FORCED AIR AND WIPE DRY WITH CLEAN

CHEESE CLOTH.

3.1 The FMS-3059 IN FPS-3040 SHALL BE FORM 2 AND CAN BE ACQUIRED FROM:

CAAP CO. INC., 152 PEPE'S FARM ROAD, MILFORD, CT. 06460 CAGE CODE OF

60922, PRODUCT FP-300-RP

4.0 THE FMS-3027-7 F-16 Corrosion Resistant Epoxy Primer Coatings MAY BE USED IN PLACE OF THE FMS-3035 Primer Coating, Flexible, Corrosion Inhibiting WHICH IS VERY HARD TO SPRAY AND NOT REQUIRED FOR THIS

APPLICATION. FMS-3035 IS CALLED OUT IN FPS- 3040 AND ON SPECIFICATION

CONTROL DRAWING 16VE902.

4.1 ANY FORM OF THE FMS-3027 EPOXY PRIMER ON FQML-3027-7 MAY BE USED.

5.0 THE POC FOR THIS MATTER IS THE PROGRAM SYSTEM ENGINEER/ESA.

6.0 IN ACCORDANCE WITH 16VE902 NOTE 3 AND 16ZE902 PARAGRAPH 4.1.1. THE

VENDOR SHALL PREPARE AN ACCEPTANCE TEST PLAN TO BE APPROVED BY USAF

COGNIZANT ENGINEERING ORGANIZATION AFLCMC/WWMEM.

Classified Data, DD Form 254 Required

CRITICAL APPLICATION ITEM

LOCKHEED MARTIN CORPORATION DBA 81755 P/N 16VE902-2

STARWIN INDUSTRIES, INC. 63592 P/N 16VE902-2

L3 TECHNOLOGIES, INC. DBA Randtron 50643 P/N 44050-2

IAW REFERENCE DRAWING NR 81755 FPS-3040

REVISION NR E DTD 06/20/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16ZE233

REVISION NR B DTD 04/10/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001

REVISION NR AK DTD 03/11/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16PR070

REVISION NR S DTD 05/21/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3001

REVISION NR G DTD 07/21/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001ISS204

REVISION NR FZ DTD 12/21/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 7842282

REVISION NR DTD 09/20/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3024

REVISION NR G DTD 02/19/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-3027

REVISION NR 7 DTD 06/26/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE233

REVISION NR G DTD 01/28/2002

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

IAW REFERENCE DRAWING NR 81755 16VE233

REVISION NR G DTD 01/16/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE233ISS010

REVISION NR F DTD 01/28/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE233ISS047

REVISION NR F DTD 03/16/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE298

REVISION NR H DTD 04/17/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE298ISS019

REVISION NR K DTD 01/02/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE298ISS029

REVISION NR K DTD 08/28/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE902

REVISION NR D DTD 09/07/2016

PART PIECE NUMBER: 16VE902-2

IAW REFERENCE DRAWING NR 81755 16VE902ISS007

REVISION NR D DTD 09/18/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE902ISS022

REVISION NR D DTD 09/23/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3045

REVISION NR E DTD 07/11/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-1044

REVISION NR 41 DTD 04/22/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 P5438

REVISION NR L DTD 04/21/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001

REVISION NR AK DTD 03/11/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3024

REVISION NR G1 DTD 07/01/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16Z001ISS204

REVISION NR FZ DTD 12/21/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-3029

REVISION NR 10 DTD 03/22/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQPL-3024

REVISION NR 10 DTD 01/27/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16PR006

REVISION NR 09 DTD 04/01/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16ZE298

REVISION NR B DTD 12/01/1995

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

IAW REFERENCE DRAWING NR 81755 16ZE902

REVISION NR DTD 05/24/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E3160

REVISION NR AB DTD 01/22/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16B1510

REVISION NR HW DTD 01/09/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-3035

REVISION NR 7 DTD 07/21/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-P5438

REVISION NR 4 DTD 02/03/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16VE233

REVISION NR G DTD 01/28/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E3160

REVISION NR AD DTD 08/31/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E3160ISS136

REVISION NR AM DTD 09/23/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E3160ISS084

REVISION NR AM DTD 09/30/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16B1510

REVISION NR HW DTD 09/28/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E4133

REVISION NR H DTD 11/22/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E4133ISS025

REVISION NR R DTD 06/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E4133

REVISION NR J DTD 12/12/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E4133

REVISION NR R DTD 01/05/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 P5379

REVISION NR F DTD 10/01/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FQML-P5379-3

REVISION NR DTD 10/21/2002

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E4133ISS082

REVISION NR R DTD 03/16/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16B1510ISS507

REVISION NR JF DTD 05/11/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16B1510ISS434

REVISION NR JF DTD 05/11/2017

IAW REFERENCE DRAWING NR 81755 16VE902-2

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

REVISION NR DTD 10/13/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 FPS-3045

REVISION NR 3 DTD 11/30/1992

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 P5438

REVISION NR L DTD 10/24/1994

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81755 16E3160

REVISION NR AM DTD 08/31/2016

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 1560-01-444-6995 19.000 EA $ ________________ $ ________________

RADOME

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 323 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 30 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 1560-01-444-6995 CONT'D

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

PARCEL POST ADDRESS:

SW3210

DLA DISTRIBUTION DEPOT HILL

7537 WARDLEIGH RD

HILL AFB UT 84056-5734

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

SW3210

DLA DISTRIBUTION DEPOT HILL

7537 WARDLEIGH RD BLDG 849W

CML 385 519 8898

HILL AFB UT 84056-5734

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0002 0001 - S00000053 1.000 EA $ ________________ $ ________________

PRICING TERMS: Firm Fixed Price

FOB: DELIVERY DATE: 323 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0072416991 0001 N/A N/A N/A 05/03/2019

0002 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 30 PAGES

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

SECTION D - PACKAGING AND MARKING

252.211-7006 RADIO FREQUENCY IDENTIFICATION (SEP 2011) DFARS

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that-

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I - Packaged operational rations.

(B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(D) Class IV - Construction and barrier materials.

(E) Class VI - Personal demand items (non-military sales items).

(F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents - suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX - Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to-

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to-

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number

Location Name City State DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment

Procedures.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 30 PAGES

SECTION D - PACKAGING AND MARKING (CONTINUED)

CONTINUED ON NEXT PAGE

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129

(Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC™ Tag Data

Standards in effect at the time of contract award. The EPC™ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal™ subscriber and possesses a unique EPC™ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC™ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government Entity

(CAGE) code and shall encode the tags in accordance with the tag identifier details located at http://www.acq.osd.mil/log/rfid/tag_data.htm. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1).

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic

Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph (d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

(End of clause)

SECTION E - INSPECTION AND ACCEPTANCE

E02 SUPPLEMENTAL FIRST ARTICLE EXHIBIT DISPOSITION – GOVERNMENT MAINTAINED (SEP 2016)

52.246-1 CONTRACTOR INSPECTION REQUIREMENTS (APR 1984) FAR

52.246-2 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014) FAR

As prescribed in 46.311, insert the following clause:

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

Title Number Date Tailoring

[Contracting Officer insert the title, number, date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instruction, documentation control, and advanced metrology.

(End of Clause)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008) DFARS

http://www.epcglobalinc.org/standards/ http://www.acq.osd.mil/log/rfid/tag_data.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/%20https:/wawf.eb.mil/ http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/46.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 30 PAGES

SECTION E - INSPECTION AND ACCEPTANCE (CONTINUED)

E05 PRODUCT VERIFICATION TESTING (SEP 2016)

SECTION F - DELIVERIES OR PERFORMANCE

52.211-16 VARIATION IN QUANTITY (APR 1984) FAR

As prescribed in 11.703(a), insert the following clause:

(a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) of this clause.

(b) The permissible variation shall be limited to:

0 Percent increase [Contracting Officer insert percentage]

0 Percent decrease [Contracting Officer insert percentage]

This increase or decrease shall apply to ALL.*

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-29 F.O.B. ORIGIN (FEB 2006) FAR

52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT - SMALL PACKAGE SHIPMENTS (JAN 1991) FAR

SECTION H - SPECIAL CONTRACT REQUIREMENTS

H03 SUPPLEMENTAL FIRST ARTICLE TESTING REQUIREMENTS (SEP 2016)

SECTION I - CONTRACT CLAUSES

52.203-18 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS OR STATEMENTS-REPRESENTATION (JAN 2017) FAR

52.203-19 PROHIBITION ON REQUIRING CERTAIN INTERNAL CONFIDENTIALITY AGREEMENTS OR STATEMENTS (JAN 2017)

FAR

252.203-7000 REQUIREMENTS RELATING TO COMPENSATION OF FORMER DOD OFFICIALS (OCT 2016) DFARS https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%2011_7.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 30 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

252.203-7002 REQUIREMENT TO INFORM EMPLOYEES OF WHISTLEBLOWER RIGHTS (SEP 2013) DFARS

252.203-7995 PROHIBITION ON CONTRACTING WITH ENTITIES THAT REQUIRE CERTAIN INTERNAL CONFIDENTIALITY

AGREEMENTS (NOV 2016) DFARS

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2016) FAR

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE (JUL 2016) FAR

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014) FAR

52.204-20 PREDECESSOR OF OFFEROR (JUL 2016) FAR

As prescribed in 4.1804(d), insert the following provision:

(a) Definitions. As used in this provision - “Commercial and Government Entity (CAGE) code” means -

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

“Predecessor” means an entity that is replaced by a successor and includes any predecessors of the predecessor.

“Successor” means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [ ] is or [ ] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code: (or mark “Unknown”) Predecessor legal name:

(Do not use a “doing business as” name)

(End of provision)

252.204-7000 DISCLOSURE OF INFORMATION (AUG 2013) DFARS

252.204-7003 CONTROL OF GOVERNMENT PERSONNEL WORK PRODUCT (APR 1992) DFARS

252.204-7004 ALTERNATE A, SYSTEM FOR AWRD MANAGEMENT (FEB 2014) DFARS

252.204-7009 LIMITATIONS ON THE USE OR DISCLOSURE OF THIRD-PARTY CONTRACTOR REPORTED CYBER INCIDENT

INFORMATION (OCT 2016) DFARS

(a) Definitions. As used in this clause -https://www.acquisition.gov/sites/default/files/current/far/html/Subpart%204_18.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 30 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

“Compromise” means disclosure of information to unauthorized persons, or a violation of the security policy of a system, in which unauthorized intentional or unintentional disclosure, modification, destruction, or loss of an object, or the copying of information to unauthorized media may have occurred.

“Controlled technical information” means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

“Covered defense information” means unclassified information that -

(1) Is -

(i) Provided to the contractor by or on behalf of DoD in connection with the performance of the contract; or

(ii) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract; and

(2) Falls in any of the following categories:

(i) Controlled technical information.

(ii) Critical information (operations security). Specific facts identified through the Operations Security process about friendly intentions, capabilities, and activities vitally needed by adversaries for them to plan and act effectively so as to guarantee failure or unacceptable consequences for friendly mission accomplishment (part of Operations

Security process).

(iii) Export control. Unclassified information concerning certain items, commodities, technology, software, or other information whose export could reasonably be expected to adversely affect the United States national security and nonproliferation objectives. To include dual use items; items identified in export administration regulations, international traffic in arms regulations and munitions list; license applications; and sensitive nuclear technology information.

(iv) Any other information, marked or otherwise identified in the contract, that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Governmentwide policies (e.g., privacy, proprietary business information).

“Cyber incident” means actions taken through the use of computer networks that result in a compromise or an actual or potentially adverse effect on an information system and/or the information residing therein.

(b) Restrictions. The Contractor agrees that the following conditions apply to any information it receives or creates in the performance of this contract that is information obtained from a third-party's reporting of a cyber incident pursuant to DFARS clause 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (or derived from such information obtained under that clause):

(1) The Contractor shall access and use the information only for the purpose of furnishing advice or technical assistance directly to the Government in support of the Government's activities related to clause 252.204-7012, and shall not be used for any other purpose.

http://www.acq.osd.mil/dpap/dars/dfars/html/current/252204.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252204.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 30 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

(2) The Contractor shall protect the information against unauthorized release or disclosure.

(3) The Contractor shall ensure that its employees are subject to use and non-disclosure obligations consistent with this clause prior to the employees being provided access to or use of the information.

(4) The third-party contractor that reported the cyber incident is a third-party beneficiary of the non-disclosure agreement between the Government and Contractor, as required by paragraph (b)(3) of this clause.

(5) A breach of these obligations or restrictions may subject the Contractor to -

(i) Criminal, civil, administrative, and contractual actions in law and equity for penalties, damages, and other appropriate remedies by the United States; and

(ii) Civil actions for damages and other appropriate remedies by the third party that reported the cyber incident, as a third party beneficiary of this clause.

(c) Subcontracts. The Contractor shall include this clause, including this paragraph (c), in subcontracts, or similar contractual instruments, for services that include support for the Government's activities related to safeguarding covered defense information and cyber incident reporting, including subcontracts for commercial items, without alteration, except to identify the parties.

252.204-7012 SAFEGUARDING COVERED DEFENSE INFORMATION AND CYBER INCIDENT REPORTING (OCT 2016) DFARS

(a) Definitions. As used in this clause-

“Adequate security” means protective measures that are commensurate with the consequences and probability of loss, misuse, or unauthorized access to, or modification of information.

“Contractor attributional/proprietary information” means information that identifies the contractor(s), whether directly or indirectly, by the grouping of information that can be traced back to the contractor(s) (e.g., program description, facility locations), personally identifiable information, as well as trade secrets, commercial or financial information, or other commercially sensitive information that is not customarily shared outside of the company.

“Contractor information system” means an information system belonging to, or operated by or for, the Contractor.

“Covered contractor information system” means an information system that is owned, or operated by or for, a contractor and that

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 30 PAGES

SECTION I - CONTRACT CLAUSES (CONTINUED)

CONTINUED ON NEXT PAGE

processes, stores, or transmits covered defense information.

“Covered defense information” means unclassified information that -

(i) Is --

(A) Provided to the contractor by or on behalf of DoD in connection with the performance of the contract; or

(B) Collected, developed, received, transmitted, used, or stored by or on behalf of the contractor in support of the performance of the contract; and

(ii) Falls in any of the following categories:

(A) Controlled technical information.

(B) Critical information (operations security). Specific facts identified through the Operations Security process about friendly intentions, capabilities, and activities vitally needed by adversaries for them to plan and act effectively so as to guarantee failure or unacceptable consequences for friendly mission accomplishment (part of Operations

Security process).

(C) Export control. Unclassified information concerning certain items, commodities, technology, software, or other information whose export could reasonably be expected to adversely affect the United States national security and nonproliferation objectives. To include dual use items; items identified in export administration regulations, international traffic in arms regulations and munitions list; license applications; and sensitive nuclear technology information.

(D) Any other information, marked or otherwise identified in the contract, that requires safeguarding or dissemination controls pursuant to and consistent with law, regulations, and Governmentwide policies (e.g., privacy, proprietary business information).

“Forensic analysis” means the practice of gathering, retaining, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

“Malicious software” means computer software or firmware intended to perform an unauthorized process that will have adverse impact on the confidentiality, integrity, or availability of an information system. This definition includes a virus, worm, Trojan horse, or other code-based entity that infects a host, as well as spyware and some forms of adware.

“Media” means physical devices or writing surfaces including, but is not limited to, magnetic tapes, optical disks, magnetic disks, large-scale integration memory chips, and printouts onto which information is recorded, stored, or printed within an information system.

"Operationally critical support'' means supplies or services designated by…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.