JA_SPE4A715R1371_KO_Toon_Redacted.pdf

DLA AVIATION FORM P-53 FEB 2011 FOR OFFICIAL USE ONLY

AMSC A. The Government’s right to use data in its possession is questionable. This code is under review and will be updated when the review is complete.

AMSC B. This must be acquired from a manufacturing source(s) specified on a source control drawing.

AMSC C. This part required engineering source approval by the design control activity in order to maintain the quality of the part.

AMSC D. The data needed to acquire this part is not economically available.

AMSC H. The Government does not have sufficient, accurate, or legible data to purchase this part from other than the current source. This code is under review and will be updated when the review is complete.

AMSC K. This part must be produced from class 1 castings under MIL-STD-2175.

AMSC L. The annual buy value of this part falls below the screening threshold established by DoD.

AMSC M. Manufacture of this part requires use of master or coordinated tooling.

AMSC N. Manufacture of this part requires special test and/or inspection facilities to maintain function or system integrity.

AMSC P. The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained.

AMSC Q. The Government does not have adequate data, lacks rights to data, or both. It is not economical to buy the data or rights to the data.

AMSC R. The Government does not own the data or rights to the data needed to purchase this part from another source.

It is not economical to procure the data or rights to the data.

AMSC S. Acquisition of this item is restricted to Government approved source(s) because the item involves military sensitive technology.

AMSC U. The cost to the Government to breakout this part and acquire it competitively has been determined to exceed the projected savings over the life span of the part.

AMSC V. This part has been designated a high reliability part. Probability of failure would be unacceptable. The engineering activity has determined that data to define and control reliability limits cannot be obtained.

AMSC Y. The design of this part is unstable. Engineering, manufacturing, or performance characteristics indicate that the required design objectives have not been achieved.

AMSC Z. This part is a commercial/no-developmental/off-the-shelf item.

The requisitioner has assigned a priority designator within Issue Priority Group (IPG) I.

The requisitioner has also cited an expedited handling signal of 999, N__, or E__ or an Office of the Secretary of Defense/Joint Chiefs of Staff project code beginning with a "9".

Procurement from a specified source or agency is authorized by statute ______________ (list statute).

Other___________________________________________________________________________________________.

6. Efforts to ensure that offers are solicited from as many sources as practicable are:

The acquisition will be synopsized on or about ___________ and any firm requesting a solicitation copy will be provided one.