AWARD_TO_VENDOR_-_REVISED_II_-_4NSN_-_ALL_SIGNED_-_REDACTED.pdf

PDF 963 KB Posted Nov 19, 2013

Attached to: MULTI-NSN PROJECT Federal contract opportunity
Solicitation number: SPE4A613X1203
Issued by: Defense Logistics Agency Aviation

About this file

From the source

REDACTED SIGNED AWARD

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

gpp4995 Typewritten Text 11/18/2013

CONTINUED ON NEXT PAGE

THIS ACQUISITION IS A TOTAL SMALL BUSINESS SET ASIDE.

THIS AWARD IS FOR FOUR (4) OF THE NSNs THAT WERE SOLICITED ON SOLICITATION SPE4A613X1203. ALL TERMS AND

CONDITIONS OF THE SOLICITATION APPLY.

EACH NSN IS LISTED BELOW WITH SPECIFIC QUANTITY/DELIVERY/INSPECTION INFORMATION.

CLAUSE 252.225-7016 APPLIES TO NSNs:

3110008064946 3110009355611 3110010782150

EXPORT CONTROL CLAUSE 252.225-7048 APPLIES TO NSNs:

3110010782150 3120011106431

INSPECTION ACCEPTANCE AT DESTINATION CLAUSE 52.246-9007 ONLY APPLIES TO NSN:

3110010782150.

TECHNICAL EXCEPTION FOR NSN 3110008064946 IS ACCEPTABLE AS QUOTED FOR THIS ACQUISITION ONLY:

"E01) PASSIVATION PER AMS 2700 METHOD 1 OR METHOD 2, NOT

ASTM-A380. IN ADDITION, ONLY THE RINGS AND BALLS WILL

BE PASSIVATED AND PASSIVITY WILL BE TESTED USING EITHER

AE COPPER SULFATE TEST OR HIGH HUMIDITY TEST."

AWARDEE CAGE: 5V122

Company Name: MECHATRONICS, INC.

DBA NATIONAL PRECISION BEARING

Address: 8152 304TH AVE S E City: PRESTON Zip: 98050

CAO-ADP: S4801A-HQ0339

State: WA County: KING Voice Phone Number: 425-222-5900

COGNIZANT DCMA OFFICE FOR ADMINISTRATION OF THIS CONTRACT IS

S4801A Name: DCMA SEATTLE Phone Number: 425-463-4170 Fax Number: 425-463-4196 E-Mail: DCMASEATTLESTAFF@DCMA.MIL Address: 188 106TH AVE., NE

SUITE 660

BELLEVUE, WA 98004-5965

AWARDED NSNs:

NSN 3110008064946

The Guaranteed Minimum of 100 each is applicable to the base period only.

There is no guarantee that the Government will place any orders after the guaranteed minimum of base period of the contract/order.

The following quantities are applicable to both the base and option

PAGE 2 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SPE4A6-14-D-5086

periods:

Minimum Delivery Order Quantity: 100 each Maximum Delivery Order Quantity: 200 each

BASE PERIOD (YEARS 1-3)

EACH $_____7.80______

OPTION PERIOD (YEARS 4-5)

EACH $___________

REQUIRED DELIVERY IS: 200 DARO

INSPECTION/ACCEPTANCE AT ORIGIN CAGE: 5V122

Company Name: MECHATRONICS, INC.

DBA NATIONAL PRECISION BEARING

Address: 8152 304TH AVE S E City: PRESTON Zip: 98050

CAO-ADP: S4801A-HQ0339

State: WA County: KING Voice Phone Number: 425-222-5900

COGNIZANT DCMA OFFICE FOR INSPECTION OF THIS ITEM IS

S4801A Name: DCMA SEATTLE Phone Number: 425-463-4170 Fax Number: 425-463-4196 E-Mail: DCMASEATTLESTAFF@DCMA.MIL Address: 188 106TH AVE., NE

SUITE 660

BELLEVUE, WA 98004-5965

ACTUAL MANUFACTURER IS CAGE: 50294

Company Name: NEW HAMPSHIRE BALL BEARINGS, INC.

DBA NHBB

DIV PRECISION DIVISION

Address: 9700 INDEPENDENCE AVE City: CHATSWORTH Zip: 91311

CAO-ADP: S0512A-HQ0339

State: CA Voice Phone Number: 8189934100

NSN 3110009355611

The Guaranteed Minimum of 10 each is applicable to the base period only.

There is no guarantee that the Government will place any orders after the guaranteed minimum of base period of the contract/order.

The following quantities are applicable to both the base and option periods:

Minimum Delivery Order Quantity: 10 each Maximum Delivery Order Quantity: 20 each

BASE PERIOD (YEARS 1-3)

PAGE 3 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

EACH $_____106.10______

OPTION PERIOD (YEARS 4-5)

EACH $___________

REQUIRED DELIVERY IS: 090 DARO

INSPECTION/ACCEPTANCE AT ORIGIN CAGE: INSPECTION/ACCEPTANCE AT ORIGIN CAGE: 5V122 Company Name: MECHATRONICS, INC.

DBA NATIONAL PRECISION BEARING

Address: 8152 304TH AVE S E City: PRESTON Zip: 98050

CAO-ADP: S4801A-HQ0339

State: WA County: KING Voice Phone Number: 425-222-5900

COGNIZANT DCMA OFFICE FOR INSPECTION OF THIS ITEM IS

S4801A Name: DCMA SEATTLE Phone Number: 425-463-4170 Fax Number: 425-463-4196 E-Mail: DCMASEATTLESTAFF@DCMA.MIL Address: 188 106TH AVE., NE

SUITE 660

BELLEVUE, WA 98004-5965

ACTUAL MANUFACTURER CAGE: 83086

Company Name: NEW HAMPSHIRE BALL BEARINGS, INC.

DIV HITECH DIVISION

Address: 175 JAFFREY RD City: PETERBOROUGH Zip: 03458

CAO-ADP: S2206A-HQ0337

State: NH Voice Phone Number: 6039244100

NSN 3110010782150

The Guaranteed Minimum of 20 each is applicable to the base period only.

There is no guarantee that the Government will place any orders after the guaranteed minimum of base period of the contract/order.

The following quantities are applicable to both the base and option periods:

Minimum Delivery Order Quantity: 20 each Maximum Delivery Order Quantity: 40 each

BASE PERIOD (YEARS 1-3)

EACH $_____91.88______

OPTION PERIOD (YEARS 4-5)

EACH $___________

REQUIRED DELIVERY IS: 200 DARO

PAGE 4 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

INSPECTION/ACCEPTANCE AT ORIGIN CAGE: INSPECTION/ACCEPTANCE AT ORIGIN CAGE: 5V122 Company Name: MECHATRONICS, INC.

DBA NATIONAL PRECISION BEARING

Address: 8152 304TH AVE S E City: PRESTON Zip: 98050

CAO-ADP: S4801A-HQ0339

State: WA County: KING Voice Phone Number: 425-222-5900

COGNIZANT DCMA OFFICE FOR INSPECTION OF THIS ITEM IS

S4801A Name: DCMA SEATTLE Phone Number: 425-463-4170 Fax Number: 425-463-4196 E-Mail: DCMASEATTLESTAFF@DCMA.MIL Address: 188 106TH AVE., NE

SUITE 660

BELLEVUE, WA 98004-5965

ACTUAL MANUFACTURER CAGE: 07484

Company Name: ACCURATE BUSHING COMPANY

DBA SMITH BEARING

Address: 443 NORTH AVE City: GARWOOD Zip: 07027

CAO-ADP: S3101A-HQ0337

State: NJ Voice Phone Number: 9087891121

NSN 3120011106431*

The Guaranteed Minimum of 50 each is applicable to the base period only.

There is no guarantee that the Government will place any orders after the guaranteed minimum of base period of the contract/order.

The following quantities are applicable to both the base and option periods:

Minimum Delivery Order Quantity: 50 each Maximum Delivery Order Quantity: 100 each

BASE PERIOD (YEARS 1-3)

EACH $_____48.25______

OPTION PERIOD (YEARS 4-5)

EACH $___________

REQUIRED DELIVERY IS: 280 DARO

INSPECTION/ACCEPTANCE AT DESTINATION.

*(ACTUAL MANUFACTURER OF THIS ITEM IS CAGE 07484)

MIL-DTL-197 PACKAGING APPLIES TO ALL NSNs EXCEPT 3120011106431.

MIL-DTL-197 PACKAGING WILL BE PERFORMED BY CAGE 5V122 AND SHALL BE INSPECTED AND ACCEPTED THERE.

PAGE 5 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

Company Name: MECHATRONICS, INC.

DBA NATIONAL PRECISION BEARING

Address: 8152 304TH AVE S E City: PRESTON Zip: 98050

CAO-ADP: S4801A-HQ0339

State: WA County: KING Voice Phone Number: 425-222-5900

COGNIZANT DCMA OFFICE FOR ALL PACKAGING INSPECTION IS

S4801A Name: DCMA SEATTLE Phone Number: 425-463-4170 Fax Number: 425-463-4196 E-Mail: DCMASEATTLESTAFF@DCMA.MIL Address: 188 106TH AVE., NE

SUITE 660

BELLEVUE, WA 98004-5965

"Ship to" addresses will be identified on each individual delivery order.

All deliveries will be within the continental United States.

ORIGIN INSPECTION/ACCEPTANCE REQUIRED FOR ALL NSNs EXCEPT NSN 3110010782150.

FOB Destination ALL.

See PID/PACK Text

52.211-9G22 DLA AVIATION PALLETIZATION FOR MIL-STD-2073 IN ACCORDANCE WITH MD00100452 REVISION B (JUL 2008)

(a) Palletization.

(1) When the total number of containers going to the same destination is 250 pounds or greater (excluding pallet) or a volume of 20 cubic feet or greater, then palletization IAW MIL-STD-147 is required.

(2) When the total number of containers going to the same destination is less than 250 pounds (excluding pallet) and is less than 20 cubic feet, then palletization is not required IAW MIL-STD-147.

(3) Except as otherwise provided in this clause, shipping containers shall be palletized IAW the guidance cited in MIL-STD-147. Special palletization instructions may be further specified under other preparation for delivery instructions in this order/contract. In the case of any inconsistency between such special palletization instructions in the requirements cited in this clause, the special palletization instructions shall take precedence.

(4) Pallets required for use, shall comply with ANSI/MH1, Part No. MH1/9-02SW4048. This part number shall be used for Level A packaging when the total weight is less than 1500 lbs. evenly distributed. This part number shall be used for Level B packaging when the total weight is greater than 1500 lbs., but less than 3000 lbs. evenly distributed.

***NOTE*** Use of nonstandard commercial pallets is forbidden unless cited in the contract/purchase order.

(i) The following commercial heat treatment process has been approved by the American Lumber Standards Committee (ALSC) and is required for all Non-Manufactured Wood Packaging Material (NMWPM) entering a European country or destined for a Container Consolidation Point (CCP) or an aerial or water port of

PAGE 6 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

embarkation: All wooden pallets and wood containers produced entirely or in part of non-manufactured softwood species shall be constructed from Heat Treated (HT to 56 degrees Centigrade for 30 minutes) coniferous material and certified accordingly by an accredited agency recognized by the American Lumber Standards Committee (ALSC) in accordance with Non-manufactured Wood Packing Policy and Non-manufactured Wood Packing Enforcement Regulations both dated May 30, 2001. All wooden pallets and containers produced entirely of non-manufactured hardwood species shall be identified by a permanent marking of "NC," 1.25 inches or greater in height, accompanied by the CAGE code of the contracted manufacturer and the month and year of the contract. On pallets, the marking shall be applied to the stringer or block on opposite sides and ends of the pallet and be contrasting and clearly visible. On containers, the marking shall be applied on a side other than the top or bottom, contrasting and clearly visible.

(ii) Oak and chestnut wood shall be bark free and square edged so that none of the natural rounded surface tissues remain, or be bark free and have a moisture content no greater than 20%. The contractor is responsible for performing an inspection of each shipment to assure compliance with this requirement.

(5) Unless otherwise specified in the contract or purchase order hazardous material containers, except cylinders and 55 gallon drums (see paragraph 5(i) thru (iv), shall be palletized IAW Load Type VI of MIL-STD-147. Pallets used shall be as cited above. "Hazardous Material" for the purpose of this clause, means any material considered hazardous under the Department of Transportation Hazardous Material Regulations, 49 CFR 171-79, IATA, IACO, IMDG, unless otherwise specified.

***NOTE*** Shrink wrap is not authorized for use with Hazardous Materials.

(i) 55 gallon drums for domestic delivery shall be palletized 3 per pallet IAW with load type 3a bonding method G (stretch wrap) or 4 per pallet IAW load type VI of MIL-STD-147 (placing an inverted wood cap under and over the load secured by metal strapping).

(ii) 55 gallon drums for export delivery shall be palletized 4 per pallet IAW load type VI of MIL-STD-147 (placing an inverted wood cap under and over the load secured by metal strapping).

(iii) Cylinders for domestic delivery shall be palletized vertically IAW load type IX of MIL-STD-147 or horizontally using metal strapping IAW MIL-STD-147 bonding method D (figure 36) and notched wood spacers (storage aid #25, figure 50) to assure the stability of the load.

(iv) Cylinders for export delivery shall be Palletized (vertically) IAW load type IX of MIL-STD-147.

(6) The use of stretch-wrap, shrink film or nonmetallic strapping for bonding is not authorized for "Export Shipments".

(7) Stretch-wrap, when utilized, shall be accomplished mechanically with a (machine or hand held tool that based on the weight of items being palletized, maintains sufficient tension to assure secure bonding of the items to the pallet during transportation).

PAGE 7 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

(8) Unless otherwise specified in the contract or Purchase Order, all polyethylene/plastic containers for domestic delivery with or without fiberboard over pack shall be palletized IAW load type 3a bonding method G (stretch wrap) or IAW Load "Type VI of MIL-STD-147 to ensure stacking support during transportation and storage. All polyethylene/plastic containers for export delivery with or without fiberboard over pack shall be palletized IAW Load Type VI of MIL-STD-147.

(b) Loading: Five-gallon tight head pails shall be loaded on pallets IAW Load Type III or IIIA of MIL-STD-147, except that a triple layer or course may be used for a total not to exceed 42 pails.

(c) Unitization: Supplies that do not lend themselves to the use of MIL-STD-147 palletization due to size, weight, configuration, etc. shall be unitized by securely blocking, bracing, or anchoring the load on a skid base or commercial type pallet in a manner that assures safe delivery.

52.211-9G73 PACKAGING AND MARKING AND REQUIREMENTS (MAR 2004)

(a) Unless stated otherwise, commercial packaging in accordance with ASTM-D-3951 is required for CONUS shipments from the contractor directly to the customer. Commercial packaging and marking is not sufficient for vendor shipments requiring movement through the Defense Transportation System (also referred to as the Military Distribution System or DLA Depot) as the shipment could ultimately be moved via Military Air.

(b) Higher level packaging in accordance with MIL-STD-2073 is mandatory for all shipments that meet the below criteria:

• Movement through the Defense Transportation System including shipments to a Military Distribution facility or depot.

• OCONUS shipments

• FMS shipments

• Hazardous material, as cited in the AID or in the Quality Requirements Matrix.

(c) Materials not considered as HAZMAT for CONUS or OCONUS commercial air shipments may be considered HAZMAT for MILAIR shipments OCONUS. As such, contractors/shippers shall ensure that material meeting HAZMAT definitions in DLAI 4145.3, Preparing Hazardous Materials for Military Air Shipment, is packaged in accordance with that instruction when the consignee is OCONUS and the shipment will be moved through the Defense Transportation System.

(d) All items shall be marked in accordance with MIL-STD-129P. Hazardous items and shelf life items, as cited in the AID or in the Quality Requirements Matrix, shall be marked in accordance with MIL-STD-129P and the appropriate clauses cited in the appendix to the matrix and the contract. The contractor is required to package material in accordance with Quantity Unit Pack (QUP), specified in MIL-STD-2073 and the Unit of Issue (UI), specified in each delivery order. A packing slip shall be located in a plastic pouch on the outside of the package. For HAZMAT destined OCONUS, a hard copy of the Material Safety Data Sheet (MSDS) must also be included.

(e) In the event of deployments, this clause may be invoked when shipments originally destined for a CONUS location are diverted to OCONUS destinations thereby necessitating movement of the material through the Defense Transportation System. In such an event, contractors will be notified by the Contracting Officer and an equitable adjustment will be made in the contract price as deemed appropriate.

NOTE: Applicable to negotiated solicitations. Offers that do not comply with the packaging and marking requirements as specified in Section D of this solicitation may be subject to rejection as being technically unacceptable.

PAGE 8 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

PAGE 9 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SECTION B

SUPPLIES/SERVICES: 3110-00-806-4946

ITEM DESCRIPTION:

BEARING, BALL, ANNULAR

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

A QUALITY MANAGEMENT PROGRAM MEETINGTHE REQUIREMENTS OF ISO 9001:2008;

A PROGRAM COMPARABLE TO ISO 9001:2008 (EX. SAE AS 9100), THE FOLLOWING

TAILORED VERSION OF ISO9001:2008; OR A PROGRAM COMPARABLE TO THE

TAILORED VERSION OF ISO 9001:2008 (EX. SAE AS 9003) IS REQUIRED.

DLA AVIATION TAILOREDHIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4 Quality management system

4.1 General requirements, [excluding reference to 1.2and excluding NOTE 3 c)]

4.2 Documentation requirements

4.2.1 General

4.2.2 Quality manual, [excluding reference to 1.2]

4.2.3Control of documents

4.2.4 Control of records

5.1 Management commitment

5.2 Customer focus

5.3 Quality policy

6.2.2 Competence,training and awareness

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to theproduct

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.3 Verification of purchasedproduct

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5Preservation of product

7.6 Control of monitoring and measuring equipment

8.2.1 Customer satisfaction

8.2.4 Monitoring andmeasurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

MERCURY OR MERCURYCONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT

CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED

UNDERTHIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS;WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAININGMERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA5100-003D).

P/N: M81793/08JE1C2N1A1

PAGE 10 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 3110-00-806-4946 CONT'D

IDENTIFY TO:

MIL-STD-130N DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARYPROPERTY

BEARING, RESTRICTIONS:

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING

MANUFACTURED IN THE UNITED STATES,ITS OUTLYING AREAS, OR CANADA AND FOR

EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (BEARING

ELEMENT, RETAINER,INNER RACE, OR OUTER RACE) MINED, PRODUCED OR

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST

EXCEED 50% OFTHE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR

ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON

ACQUISITIONOF BALL AND ROLLER BEARINGS (DEC 2010).

A CONTRACTOR'S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL

BEING OFFERED ISREQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT

http://www.aviation.dla.mil/UserWeb/ForeignBearingWaiver/index.htm TO

OBTAINA COPY OF THE CONTRACTOR'S DECLARATION FORM. PLEASE PRINT,

COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE

BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT

BEING CONSIDERD FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEETTHIS SOURCING REQUIREMENT, THIS

SOLICITATION MAY BE CANCELLED AND A WAIVER MAY BE REQUESTED BY THE

PROCUREMENT ACTIVITY. UPONRECEIPT OF AN APPROVED WAIVER FROM THE

DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED. SEE

DFARS 225.7009-4,WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS (DEC

2010).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAWANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACTQUANTITY.

ADDITIONAL INFORMATION:

PRESERVATION, PACKAGING, PACKING, AND MARKING

REQUIREMENTS SHALL BE IN ACCORDANCEWITH

MIL-DTL-197L.

1. METHOD OF PRESERVATION SHALL BE DETERMINED BY

BEARING TYPE AND SIZE (REFER TO TABLE I).

2. PARAGRAPH 3.10.2,SELECTION OF UNIT

PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR

PRESERVATIVE COMPOUND SHALL BE DETERMINED

DEPENDANT UPON BEARINGTYPE AND CLOSURE IN

ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II.

FOR PRESERVATION PROCESS CONTROLS, DEPENDANT

UPON BEARING TYPE,CLOSURE, AND LUBRICANT,

PARAGRAPHS 3.4 THROUGH 3.9 APPLY.

3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS

PAGE 11 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

OF PARAGRAPH 3.12.4APPLY.

4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE

TO THE QUALITY ASSURANCE VERIFICATION

REQUIREMENTS AS CONTAINED WITHINSECTION 4 OF

MIL-DTL-197L.

...END OF SPECIAL PACKAGING INSTRUCTIONS...

IAW BASIC SPEC NR MIL-B-81793/8(1)

REVISION NR 1 DTD10/31/1994

PART PIECE NUMBER: M81793/08-JE1C2N1A1

IAW REFERENCE SPEC NR MIL-B-81793D(1) SUP 1

REVISION NR D DTD 03/21/1994

PARTPIECE NUMBER:

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 3110-00-806-4946 ** EA $ ** $ **

BEARING, BALL,

ANNULAR

**TO BE CITED IN EACH DELIVERY ORDER

PRICING TERMS: Firm Fixed Price

BASE PERIOD

SUPPLIES/SERVICES: 3110-00-806-4946

Delivery CLIN Price (in days) .

0001 $ 7.80 200

OPTION 01

SUPPLIES/SERVICES: 3110-00-806-4946

Delivery CLIN Price (in days) .

0001 $ ** **

**SEE REMARKS PAGES

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE:

PREP FOR DELIVERY:

PAGE 12 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

Markings Paragraph

For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD(Customer-Direct) shipments, both DoD linear ... If there are inconsistencies between the schedule and MIL-STD-129P, the scheduletakes precedence.

* All containers shall be tested to meet ASTM D4169, Standard Practice for Performance Testing of ShippingContainers and Systems.

* All Section D Packaging Clauses take precedence over ASTM D3951.

* In addition to requirements inMIL-STD-129P, all Labeling and Marking shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129identification labels on all shipping containers, including the unit and intermediate levels. The Method of Preservation

(M) ofCommercial Pack (CP) shall be applied to all labels and marking as “MCP.”

* For all shipments of packaged materiel to theGovernment, which includes either Depot(DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to the Military Shipment Label(MSL) requirement. When the MSL is required, the Transportation Control Number (TCN) is not an exception and must always bepresent. TCN construction is detailed in DoD 4500.9-R (Appendix L).

* The Unit of Issue (U/I) and Quantity per Unit Pack (QUP)as specified in the contract take precedence over ASTM D3951.

* Loose-fill cushioning and dunnage materials are prohibited inall shipments to DOD customers.

* Unitization in accordance with MIL-STD-147, Palletized Unit Loads, is required for allshipments to the DOD activities.

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 1000015668 0003 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3110-00-935-5611

PAGE 13 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 3110-00-935-5611 CONT'D

BEARING BALL ANNULAR

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

A QUALITY MANAGEMENT PROGRAM MEETING THEREQUIREMENTS OF ISO 9001:2008;

A PROGRAM COMPARABLE TO ISO 9001:2008 (EX. SAE AS 9100), THE FOLLOWING

TAILORED VERSION OF ISO9001:2008; OR A PROGRAM COMPARABLE TO THE

TAILORED VERSION OF ISO 9001:2008 (EX. SAE AS 9003) IS REQUIRED.

DLA AVIATION TAILOREDHIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4 Quality management system

4.1 General requirements, [excluding reference to 1.2and excluding NOTE 3 c)]

4.2 Documentation requirements

4.2.1 General

4.2.2 Quality manual, [excluding reference to 1.2]

4.2.3Control of documents

4.2.4 Control of records

5.1 Management commitment

5.2 Customer focus

5.3 Quality policy

6.2.2 Competence,training and awareness

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to theproduct

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.3 Verification of purchasedproduct

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5Preservation of product

7.6 Control of monitoring and measuring equipment

8.2.1 Customer satisfaction

8.2.4 Monitoring andmeasurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

P/N:AA59624-404TABT

IDENTIFY TO:

MIL-STD-130N DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

BEARINGRESTRICTION:

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS,OR CANADA AND FOR

EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (BEARING

ELEMENT, RETAINER, INNER RACE, OR OUTERRACE) MINED, PRODUCED OR

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST

EXCEED 50% OF THE TOTAL COST OF THEBEARING COMPONENTS OF THAT BALL OR

ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON

PAGE 14 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ACQUISITION OF BALL AND ROLLERBEARINGS (DEC 2010).

A CONTRACTOR'S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL

BEING OFFERED IS REQUIRED. PLEASE VISITTHE FOREIGN BEARING WEBSITE AT

http://www.aviation.dla.mil/UserWeb/ForeignBearingWaiver/index.htm TO

OBTAIN A COPY OF THECONTRACTOR'S DECLARATION FORM. PLEASE PRINT,

COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE

BUYER. FAILURE TOPROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT

BEING CONSIDERD FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS

SOLICITATION MAY BE CANCELLED AND A WAIVER MAY BE REQUESTED BY THE

PROCUREMENT ACTIVITY. UPON RECEIPT OF ANAPPROVED WAIVER FROM THE

DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED. SEE

DFARS 225.7009-4, WAIVER,RESTRICTION ON BALL AND ROLLER BEARINGS (DEC

2010).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAWANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACTQUANTITY.

PRESERVATION, PACKAGING, PACKING, AND MARKING

REQUIREMENTS SHALL BE IN ACCORDANCE WITH

MIL-DTL-197L.

1. METHOD OFPRESERVATION SHALL BE DETERMINED BY

BEARING TYPE AND SIZE (REFER TO TABLE I).

2. PARAGRAPH 3.10.2, SELECTION OF UNIT

PRESERVATION,APPLIES. PROTECTIVE LUBRICANT OR

PRESERVATIVE COMPOUND SHALL BE DETERMINED

DEPENDANT UPON BEARING TYPE AND CLOSURE IN

ACCORDANCEWITH PARAGRAPH 3.3.4 AND TABLE II.

FOR PRESERVATION PROCESS CONTROLS, DEPENDANT

UPON BEARING TYPE, CLOSURE, ANDLUBRICANT,

PARAGRAPHS 3.4 THROUGH 3.9 APPLY.

3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS

OF PARAGRAPH 3.12.4 APPLY.

4.CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE

TO THE QUALITY ASSURANCE VERIFICATION

REQUIREMENTS AS CONTAINED WITHIN SECTION 4OF

MIL-DTL-197L.

...END OF SPECIAL PACKAGING INSTRUCTIONS...

IAW BASIC CID A-A-59624C

REVISION NR C DTD 02/22/2011

PART PIECENUMBER: P/N AA59624-404TABT

PAGE 15 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

0002 3110-00-935-5611 ** EA $ ** $ **

BEARING, BALL,

ANNULAR

**TO BE CITED IN EACH DELIVERY ORDER

PRICING TERMS: Firm Fixed Price

BASE PERIOD

SUPPLIES/SERVICES: 3110-00-935-5611

Delivery CLIN Price (in days) .

0002 $ 106.10 90

OPTION 01

SUPPLIES/SERVICES: 3110-00-935-5611

Delivery CLIN Price (in days) .

0002 $ ** **

**SEE REMARKS PAGES

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

* All containers shall be tested to meet ASTM D4169, Standard Practice for Performance Testing of ShippingContainers and Systems.

* All Section D Packaging Clauses take precedence over ASTM D3951.

(M) ofCommercial Pack (CP) shall be applied to all labels and marking as “MCP.”

PAGE 16 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

* The Unit of Issue (U/I) and Quantity per Unit Pack (QUP)as specified in the contract take precedence over ASTM D3951.

* Loose-fill cushioning and dunnage materials are prohibited inall shipments to DOD customers.

ITEM PR PRLI PR PRLI Material Need Ship Date .

0002 1000015668 0004 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3110-01-078-2150

BEARING, ROLLER, NEEDLE

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

A QUALITY MANAGEMENT PROGRAM MEETING THE REQUIREMENTS OF ISO 9001:2008;

A PROGRAM COMPARABLE TO ISO 9001:2008 (EX. SAE AS 9100), THE FOLLOWING

TAILORED VERSION OF ISO 9001:2008; OR A PROGRAM COMPARABLE TO THE

TAILORED VERSION OF ISO 9001:2008 (EX. SAE AS 9003) IS REQUIRED.

DLA AVIATION TAILORED HIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4 Quality management system

4.1 General requirements, [excluding reference to 1.2 and excluding NOTE 3 c)]

4.2 Documentation requirements

4.2.1 General

4.2.2 Quality manual, [excluding reference to 1.2]

4.2.3 Control of documents

PAGE 17 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 3110-01-078-2150 CONT'D

4.2.4 Control of records

5.1 Management commitment

5.2 Customer focus

5.3 Quality policy

6.2.2 Competence, training and awareness

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to the product

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.3 Verification of purchased product

7.5.1 Control of production and service provision

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5 Preservation of product

7.6 Control of monitoring and measuring equipment

8.2.1 Customer satisfaction

8.2.4 Monitoring and measurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

PN: 709-4403687 PC 27, 28, 29

IDENTIFY TO:

MIL-STD-130N DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

BEARING RESTRICTIONS:

AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR

EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (BEARING

ELEMENT, RETAINER, INNER RACE, OR OUTER RACE) MINED, PRODUCED OR

MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST

EXCEED 50% OF THE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR

ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON

ACQUISITION OF BALL AND ROLLER BEARINGS (DEC 2010).

A CONTRACTOR'S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL

BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT

http://www.aviation.dla.mil/UserWeb/ForeignBearingWaiver/index.htm TO

OBTAIN A COPY OF THE CONTRACTOR'S DECLARATION FORM. PLEASE PRINT,

COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE

BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT

BEING CONSIDERD FOR AWARD.

IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS

SOLICITATION MAY BE CANCELLED AND A WAIVER MAY BE REQUESTED BY THE

PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE

DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED. SEE

DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS (DEC

2010).

SAMPLING:

1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

PAGE 18 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

ADDITIONAL INFORMATION:

PRESERVATION, PACKAGING, PACKING, AND MARKING

REQUIREMENTS SHALL BE IN ACCORDANCE WITH

MIL-DTL-197L.

1. METHOD OF PRESERVATION SHALL BE DETERMINED BY

BEARING TYPE AND SIZE (REFER TO TABLE I).

2. PARAGRAPH 3.10.2, SELECTION OF UNIT

PRESERVATION, APPLIES. PROTECTIVE LUBRICANT OR

PRESERVATIVE COMPOUND SHALL BE DETERMINED

DEPENDANT UPON BEARING TYPE AND CLOSURE IN

ACCORDANCE WITH PARAGRAPH 3.3.4 AND TABLE II.

FOR PRESERVATION PROCESS CONTROLS, DEPENDANT

UPON BEARING TYPE, CLOSURE, AND LUBRICANT,

PARAGRAPHS 3.4 THROUGH 3.9 APPLY.

3. PACKAGING PRECAUTIONARY MARKING REQUIREMENTS

OF PARAGRAPH 3.12.4 APPLY.

4. CONTRACTOR'S PACKAGING FACILITY SHALL ADHERE

TO THE QUALITY ASSURANCE VERIFICATION

REQUIREMENTS AS CONTAINED WITHIN SECTION 4 OF

MIL-DTL-197L.

...END OF SPECIAL PACKAGING INSTRUCTIONS...

IAW BASIC DRAWING NR 43689 4403687

REVISION NR L DTD 04/12/1993

PART PIECE NUMBER: 790-4403687 PC 27,28,29

0003 3110-01-078-2150 ** EA $ ** $ **

BEARING,ROLLER

,NEEDLE

**TO BE CITED IN EACH DELIVERY ORDER

PRICING TERMS: Firm Fixed Price

BASE PERIOD

SUPPLIES/SERVICES: 3110-01-078-2150

PAGE 19 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

Delivery CLIN Price (in days) .

0003 $ 91.88 200

OPTION 01

SUPPLIES/SERVICES: 3110-01-078-2150

Delivery CLIN Price (in days) .

0003 $ ** **

**SEE REMARKS PAGES

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE:

PREP FOR DELIVERY:

SHALL BE PACKAGED STANDARD COMMERCIAL IN ACCORDANCE WITH ASTM D 3951.

Markings Paragraph

For all shipments of packaged materiel to the government, which includes either Depot (DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear ... If there are inconsistencies between the schedule and MIL-STD-129P, the schedule takes precedence.

* All containers shall be tested to meet ASTM D4169, Standard Practice for Performance Testing of Shipping Containers and Systems.

* All Section D Packaging Clauses take precedence over ASTM D3951.

* In addition to requirements in MIL-STD-129P, all Labeling and Marking shall have a Method of Preservation of Commercial Pack applied to the MIL-STD-129 identification labels on all shipping containers, including the unit and intermediate levels. The Method of Preservation

(M) of Commercial Pack (CP) shall be applied to all labels and marking as “MCP.”

* For all shipments of packaged materiel to the Government, which includes either Depot(DLA-Direct) or DVD (Customer-Direct) shipments, both DoD linear and two-dimensional (2D) bar code markings are required in accordance with MIL-STD-129. See DLAD 52.211-9010 for exceptions to the Military Shipment Label (MSL) requirement. When the MSL is required, the Transportation Control Number (TCN) is not an exception and must always be present. TCN construction is detailed in DoD 4500.9-R (Appendix L).

* The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as

PAGE 20 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

specified in the contract take precedence over ASTM D3951.

* Loose-fill cushioning and dunnage materials are prohibited in all shipments to DOD customers.

is required for all shipments to the DOD activities.

ITEM PR PRLI PR PRLI Material Need Ship Date .

0003 1000015668 0005 N/A N/A N/A N/A

SUPPLIES/SERVICES: 3120-01-110-6431

BUSHING, SLEEVE

52.246-11 Higher Level Contract Quality Requirement (Manufacturers)

A QUALITY MANAGEMENT PROGRAM MEETING THEREQUIREMENTS OF ISO 9001:2008;

A PROGRAM COMPARABLE TO ISO 9001:2008 (EX. SAE AS 9100), THE FOLLOWING

TAILORED VERSION OF ISO9001:2008; OR A PROGRAM COMPARABLE TO THE

TAILORED VERSION OF ISO 9001:2008 (EX. SAE AS 9003) IS REQUIRED.

DLA AVIATION TAILOREDHIGHER LEVEL QUALITY CLAUSE FROM ISO 9001:2008

4 Quality management system

4.1 General requirements, [excluding reference to 1.2and excluding NOTE 3 c)]

4.2 Documentation requirements

4.2.1 General

4.2.2 Quality manual, [excluding reference to 1.2]

4.2.3Control of documents

4.2.4 Control of records

5.1 Management commitment

5.2 Customer focus

5.3 Quality policy

6.2.2 Competence,training and awareness

7.1 Planning of product realization, [excluding NOTE 2]

7.2.1 Determination of requirements related to theproduct

7.2.3 Customer communication

7.3.7 Control of design and development changes

7.4.3 Verification of purchasedproduct

7.5.1 Control of production and service provision

PAGE 21 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SUPPLY/SERVICE: 3120-01-110-6431 CONT'D

7.5.3 Identification and traceability

7.5.4 Customer property

7.5.5Preservation of product

7.6 Control of monitoring and measuring equipment

8.2.1 Customer satisfaction

8.2.4 Monitoring andmeasurement of product

8.3 Control of nonconforming product

8.5.2 Corrective action

8.5.3 Preventive action

P/N: 3365778-1

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA

ANDELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED

THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHERTHE

DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO

INTERNATIONAL AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY

CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE

WEB ADDRESSHTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATILECREEK, MI 49017-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT,TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSETRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF

GENERALAPPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL

DATA AREREQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN

APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO

RECEIVE ACOPY OF THE EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTEDBY DODD 5230.25."

IDENTIFY TO:

MIL-STD-130N DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

SAMPLING:

1.SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ

PAGE 22 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE

APPROVED BY THEPCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO

DEFECTS IS REQUIRED

2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE

FORREJECTION OF THE ENTIRE CONTRACT QUANTITY.

Casting/forging may be required to manufacture this NSN. If a casting/forging isrequired, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & MaritimeSupply Chains) DSCC.cast.forge@dla.mil

IAW BASIC DRAWING NR 82577 3365778

REVISION NR B DTD 12/03/1986

PART PIECE NUMBER: P/N:3365778-1

IAW REFERENCE DRAWING NR 82577 PR60038

REVISION NR A DTD 07/26/1978

PART PIECE NUMBER:

0004 3120-01-110-6431 ** EA $ ** $ **

BUSHING,SLEEVE

**TO BE CITED IN EACH DELIVERY ORDER

PRICING TERMS: Firm Fixed Price

BASE PERIOD

SUPPLIES/SERVICES: 3120-01-110-6431

Delivery CLIN Price (in days) .

0004 $ 48.25 280

OPTION 01

SUPPLIES/SERVICES: 3120-01-110-6431

Delivery CLIN Price (in days) .

0004 $ ** **

**SEE REMARKS PAGES

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

PAGE 23 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

* All containers shall be tested to meet ASTM D4169, Standard Practice for Performance Testing of ShippingContainers and Systems.

* All Section D Packaging Clauses take precedence over ASTM D3951.

(M) ofCommercial Pack (CP) shall be applied to all labels and marking as “MCP.”

* The Unit of Issue (U/I) and Quantity per Unit Pack (QUP)as specified in the contract take precedence over ASTM D3951.

* Loose-fill cushioning and dunnage materials are prohibited inall shipments to DOD customers.

PAGE 24 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

ITEM PR PRLI PR PRLI Material Need Ship Date .

0004 1000015668 0006 N/A N/A N/A N/A

PAGE 25 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SECTION D - PACKAGING AND MARKING

252.211-7006 RADIO FREQUENCY IDENTIFICATION (SEP 2011) DFARS

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that—

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I – Packaged operational rations.

(B) Class II – Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(D) Class IV – Construction and barrier materials.

(E) Class VI – Personal demand items (non-military sales items).

(F) Subclass of Class VIII – Medical materials (excluding pharmaceuticals, biologicals, and reagents – suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX – Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/rfid/ or to—

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to—

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number

Location Name

City

State

DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures.

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129 (Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC™ Tag Data Standards in effect at the time of contract award. The EPC™ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal™ subscriber and possesses a unique EPC™ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC™ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government Entity (CAGE) code and shall encode the tags in accordance with the tag identifier details located at http://www.acq.osd.mil/log/rfid/tag_data.htm. If the Contractor uses a third-party packaging house to encode its tags, the CAGE code of the third-party packaging house is acceptable.

(3) Regardless of the selected encoding scheme, the Contractor with which the Department holds the contract is responsible for ensuring that the tag ID encoded on each passive RFID tag is globally unique, per the requirements in paragraph (c)(1).

(e) Advance shipment notice. The Contractor shall use Wide Area WorkFlow (WAWF), as required by DFARS 252.232-7003, Electronic Submission of Payment Requests, to electronically submit advance shipment notice(s) with the RFID tag ID(s) (specified in paragraph

(d) of this clause) in advance of the shipment in accordance with the procedures at https://wawf.eb.mil/.

PAGE 26 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

SPE4A6-14-D-5086

http://www.acq.osd.mil/log/rfid/ http://www.epcglobalinc.org/standards/ http://www.acq.osd.mil/log/rfid/tag_data.htm http://www.acq.osd.mil/dpap/dars/dfars/html/current/252232.htm http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/dfars/%20https:/wawf.eb.mil/

(End of clause)

52.211-9010 SHIPPING LABEL REQUIREMENTS – MILITARY-STANDARD (MIL-STD) 129P (MAR 2012) DLAD

52.211-9010 SHIPPING LABEL REQUIREMENTS – MILITARY STANDARD (MIL-STD) 129P (NOV 2011), ALT I (AUG 2005)

DLAD

52.211-9033 PACKAGING AND MARKING REQUIREMENTS (APR 2008) DLAD

52.211-9095 PALLETIZATION OF SHIPMENTS (SEP 2012) DLAD

52.246-9062 REPACKAGING TO CORRECT PACKAGING DEFICIENCIES (SEP 2008) DLAD

52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) DLAD

SECTION E - INSPECTION AND ACCEPTANCE

52.211-9023 SUBSTITUTION OF ITEM AFTER AWARD (NOV 2011) DLAD

52.246-02 INSPECTION OF SUPPLIES FIXED PRICE (AUG 1996) FAR

52.246-11 HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (FEB 1999) FAR

The Contractor shall comply with the higher-level quality standard selected below. [If more than one standard is listed, the offeror shall indicate its selection by checking the appropriate block.]

Title Number Date Tailoring

[X] ISO 9001:2008

[Contracting Officer insert the title, number (if any), date, and tailoring (if any) of the higher-level quality standards.] (End of clause)

252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008) DFARS

52.246-9003 MEASURING AND TEST EQUIPMENT (NOV 2011) DLAD

52.246-9007 INSPECTION AND ACCEPTANCE AT DESTINATION (AUG 2007) DLAD

52.246-9008 INSPECTION AND ACCEPTANCE AT ORIGIN (NOV 2011) DLAD

(a) Inspection and Acceptance are at Origin.

(b) The point of acceptance will be the point of last inspection before shipment unless otherwise indicated by the offeror.

Supplies:

Plant:

SEE PAGE 2,3,4 REMARKS

Commercial and Government Entity (CAGE) Code: 5V122 Street:

City/State/Zip:

Applicable to contract line-item(s) (CLIN(s):

ALL CLINS / ALL DELIVERY ORDERS

(d) The Offeror shall indicate below the location where packaging will be inspected:

Packaging:

[ X ] Same as for supplies, or, PAGE 27 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

Plant:

SEE PAGE 2,3,4 REMARKS

Cage Code: 5V122 Street:

City/St/Zip:

Applicable to clin(s): ALL CLINS / ALL DELIVERY ORDERS

52.246-9008 INSPECTION AND ACCEPTANCE AT ORIGIN (AUG 2007), ALT I (AUG 2007) DLAD

52.246-9019 MATERIAL AND INSPECTION REPORT (APR 2008) DLAD

SECTION F - DELIVERIES OR PERFORMANCE

52.211-16 VARIATION IN QUANTITY (APR 1984) FAR

(b) The permissible variation shall be limited to:

0 Percent increase 0 Percent decrease This increase or decrease shall apply to ALL CLINS / ALL DELIVERY ORDERS .

52.211-17 DELIVERY OF EXCESS QUANTITIES (SEP 1989) FAR

52.211-9020 TIME OF DELIVERY - ACCELERATED (JUN 2008) DLAD

52.211-9054 TIME OF DELIVERY – NEGOTIATED IQCs AND SIMPLIFIED ACQUISITIONS FOR IDPOs (NOV 2011) DLAD

(b) Delivery is required in accordance with the schedule set forth below.

WITHIN THE NUMBER OF DAYS STATED BELOW AFTER DATE OF DELIVERY ORDER

NSN(S) QUANTITY (PER

CALENDAR MONTH)

GOVERNMENT

REQUIRED

OFFEROR’S

PROPOSED

3110008064946 Up to 121 each 200 DARO Each additional each (or less) ADD:

3110009355611 Up to 10 each 90 DARO Each additional each (or less) ADD:

3110010782150 Up to 17 EA each 200 DARO Each additional each (or less) ADD:

3120011106431 Up to 52 EA each 280 DARO Each additional each (or less) ADD:

52.242-15 STOP-WORK ORDER (AUG 1989) FAR

52.242-17 GOVERNMENT DELAY OF WORK (APR 1984) FAR

52.247-34 F.O.B. DESTINATION (NOV 1991) FAR

52.247-48 F.O.B. DESTINATION - EVIDENCE OF SHIPMENT (FEB 1999) FAR

52.247-9016 F.O.B. DESTINATION CONTRACTOR TRANSSHIPMENT (NOV 2011) DLAD

52.247-9031 MANUFACTURER'S LOADING PRACTICES (NOV 2011) DLAD

PAGE 28 OF 35 PAGESCONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED:

52.247-9035 SHIPPING INSTRUCTIONS (DOMESTIC) (NOV 2011) DLAD

Mail instructions (not applicable to Army Post Office (APO) or Fleet Post Office (FPO) addresses):

(a) Route domestic shipments within mail limitations as follows based on the transportation priority (TP) reflected in the "mark for" data with each contract line item number (CLIN). Commercial small parcel carrier (e.g., United Parcel Service (UPS) or Federal Express) is an acceptable mode of shipment to domestic addresses.

(1) Ship all NMCS, 777, and 999, regardless of TP or distance, by…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Nov 14, 2017.