PID_PACK_Solicitation_SPE4A118R0004.docx

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:009565044

SHIM, LAMINATED, ENGINE MOUNT

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

LOCKHEED MARTIN CORPORATION

CAGE 98897

P/N 918778-1

REFERENCE NUMBER:CS001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 36659 918778

REVISION NR B DTD 09/18/2006

PART PIECE NUMBER: 918778-1

IAW REFERENCE DRAWING NR 36659 100

REVISION NR AL DTD 01/06/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 36659 336446

REVISION NR A DTD 02/12/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98897 07-665

REVISION NR G DTD 10/16/1964

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 36659 336446

REVISION NR A DTD 02/26/1963

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH ASTM D 3951.

NSN:010575135

CHORD,RIB,LOWER RIG

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD057

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZDL01

P/N: 5-86072-94

EXCEPTIONS

1. PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND

BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

2. DELETE REFERENCE TO BAC 5005, BAC 5710 AND D2-5000.

3. USE 2024-T3511 PER SAE AMS-QQ-A-200 AND SAE AMS-QQ-200/3 IN LIEU OF

2024-T4 PER QQ-A-267.

4. PART TO BE FURNISHED WITHOUT RIVET, PILOT OR FASTENER HOLES.

5. USE SAE AMS10136-2004 IN LIEU OF AND10136-2004.

6. F-2.30 FINISH CODE DEFINED: CHEMICAL TREAT TO MEET THE REQUIREMENTS

OF MIL-DTL-5541, CLASS IA OR ANODIZE TO MEET THE REQUIREMENTS OF

MIL-A-8625, TYPE I, CLASS 1. APPLY ONE COAT OF MIL-PRF-23377, TYPE I,

CLASS C2, ACCORDING TO FINISH MANUFACTURER#S APPLICATION INSTRUCTIONS

AND MIL-DTL-18264.

7. ALL SPECIAL PROCESSES IDENTIFIED BY 424 SCMS IN DRAWING 20145214

SHALL BE PERFORMED BY ORGANIZATIONS MAINTAINING NADCAP CERTIFICATION FOR

THE RELEVANT SPECIAL PROCESS. ONLY THOSE PROCESSES HIGHLIGHTED IN YELLOW

IN DRAWING 20145214 ARE IDENTIFIED BY 424 SCMS AS REQUIRING NADCAP

CERTIFIED PROCESSORS.

****END OF EXCEPTIONS****

IAW BASIC DRAWING NR 81205 5-86072

REVISION NR V DTD 10/07/1999

PART PIECE NUMBER: 5-86072-94

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 5-86072/11

REVISION NR G DTD 09/13/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 5-86072

REVISION NR J DTD 02/25/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 5-86072

REVISION NR V DTD 09/11/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 5-86072

REVISION NR J DTD 10/03/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98748 20145214

REVISION NR DTD 02/03/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 06/23/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307-1

REVISION NR D DTD 01/15/2016

LINE ITEM 00003 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH "ASTM D3951."

NSN:010957279

FITTING ASSY

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS001

REFERENCE NUMBER:ZD080

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 78286 70500-02160

REVISION NR AW DTD 06/08/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS9507

REVISION NR 05 DTD 08/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70009-03001

REVISION NR P DTD 06/27/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8423

REVISION NR 05 DTD 07/08/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8640

REVISION NR 22 DTD 06/16/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8654

REVISION NR 11 DTD 02/20/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8669

REVISION NR 19 DTD 07/21/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8752

REVISION NR 11 DTD 01/14/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8798

REVISION NR 17 DTD 04/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8806

REVISION NR 13 DTD 06/17/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8630

REVISION NR 26 DTD 05/19/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70009-03001

REVISION NR P DTD 05/21/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS1058

REVISION NR 7 DTD 10/28/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8640

REVISION NR 18 DTD 08/25/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8654

REVISION NR 11 DTD 12/18/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8805

REVISION NR 11 DTD 11/12/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS9612

REVISION NR 8 DTD 01/15/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS5202

REVISION NR DTD 05/18/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8486

REVISION NR 11 DTD 03/07/2000

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8486

REVISION NR 14 DTD 12/05/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8669

REVISION NR 19 DTD 03/10/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8752

REVISION NR 9 DTD 11/18/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS5100

REVISION NR 39 DTD 10/27/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70500-02160

REVISION NR CL DTD 07/17/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 SS8798

REVISION NR 13 DTD 11/22/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 78286 70500-02160

REVISION NR EF DTD 07/17/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81996 70500-02160

REVISION NR H DTD 11/21/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 13873 70500-02160

REVISION NR DTD 09/11/2013

LINE ITEM 00004 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:012065289

SUPPORT,STRUCTURAL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD057

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZDL01

P/N: 458-52226-531

EXCEPTIONS DATA

1.,,PART MARKING PER MIL-STD-130, RUBBER STAMP PER BAC 5307. MARKING

MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER, CURRENT DESIGN

AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S ,,CAGE CODE (-----), DATE

OF MANUFACTURE, AND "FOR MILITARY USE ,,ONLY". PARTS WILL NOT BE MARKED

WITH THE ORIGINAL DESIGN ,,AUTHORITY (BOEING) CAGE CODE.

2.,,DELETE REFERENCE TO D2-5000, BAC 5005 AND 32-2727.

3.,,SURFACE TEXTURE PER ASME B46.1 IN LIEU OF BACD 2097.

4.,,DIMENSIONS AND TOLERANCES PER ASME Y14.5 I/L/O ANSI Y14.5.

5.,,USE SAE AMS 5901 IN LIEU OF MIL-S-5059.

6.,,USE NASM 20470 IN LIEU OF MS 20470.

7.,,USE NASM 20615 IN LIEU OF MS 20615.

8.,,USE SAE AMS QQ-A-250/5 IN LIEU OF QQ-A-250/5.

9.,,DISREGARD MIL-H-6088.

10.,,F-2.16 FINISH CODE DEFINED: CHEMICAL TREAT TO MEET THE

REQUIREMENTS OF MIL-DTL-5541, CLASS IA. APPLY MIL-PRF-23377, TYPE I,

CLASS C2, PRIMER TO A DRY FILM THICKNESS OF 0.001 TO 0.002 INCH

ACCORDING TO MANUFACTURER'S APPLICATION INSTRUCTIONS AND MIL-F-18264.

11.,,F-2.59 FINISH CODE DEFINED: CHEMICAL TREAT TO MEET THE

REQUIREMENTS OF MIL-DTL-5541, CLASS IA. APPLY MIL-PRF-23377, TYPE I,

CLASS C2, TO DRY FILM THICKNESS OF 0.0006 INCH MINIMUM ACCORDING TO

MANUFACTURER'S APPLICATION INSTRUCTIONS ,,

AND MIL-F-18264.

12.,,F-8.07 FINISH CODE DEFINED: PREPARE SURFACE AND PASSIVATE

ACCORDING TO SAE AMS 2700.

**ADDED PER ESA; DSCR-QA-15-00608

Add an engineering note to the Technical Data Package (TDP) stating use BACB30FM6-4 in lieu of BACB30FM6-3 in the one location that goes through the 458-52234-533, 458-52234-531, and 458-52234-518.

****END OF EXCEPTIONS****

IAW BASIC DRAWING NR 82918 458-52226

REVISION NR G DTD 05/02/1988

PART PIECE NUMBER: 458-52226-531

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 11/22/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004

REVISION NR L DTD 01/17/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5049

REVISION NR H DTD 05/24/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5602

REVISION NR AF DTD 06/15/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACC30M

REVISION NR AF DTD 04/22/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52226

REVISION NR M DTD 05/06/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52231

REVISION NR A DTD 11/24/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52231

REVISION NR D DTD 03/29/1984

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52232

REVISION NR F DTD 11/14/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52232

REVISION NR H DTD 11/26/1985

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52234

REVISION NR G DTD 04/27/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52234

REVISION NR J DTD 05/06/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5049

REVISION NR H DTD 05/20/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5009

REVISION NR AA DTD 12/05/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5602

REVISION NR AF DTD 08/28/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BACB30FM

REVISION NR AY DTD 04/13/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52234/1

REVISION NR G DTD 04/27/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 04/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 10/09/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 05/15/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5004-1

REVISION NR R DTD 03/04/2004

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52231/1

REVISION NR A DTD 11/24/1983

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC1505-100665

REVISION NR DTD 01/12/1967

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 82918 458-52226

REVISION NR G DTD 01/29/1993

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BMS7-118G

REVISION NR G DTD 09/11/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR F DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR G DTD 09/01/2006

LINE ITEM 00005 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:014914125

FITTING, STRUCTURAL COMPONENT,AIRCRAFT

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RC001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:ZD057

REFERENCE NUMBER:CS001

ENGINEERING DATA REQUIREMENTS (ATTACHMENT "A")

HILL AFB FORM 462:

1. CONTRACTOR IS RESPONSIBLE TO COMPLETELY RESEARCH THESE MANUALS,

SPECIFICATIONS, AND STANDARDS AND FULLY UNDERSTAND THE REQUIREMENTS

NECESSARY FOR MANUFACTURE OF COMPONENT PARTS AND ASSEMBLIES. ALL

DEVIATIONS, MINOR AND MAJOR, FROM THE ENGINEERING DRAWING PACKAGE

SHALL BE SUBMITTED TO 508 ATSS/ENM (A-10 SYSTEMS ENGINEERING).

2. WHEN MILITARY DOCUMENTS LISTED IN THE ENGINEERING DRAWINGS ARE

CANCELLED THEY SHALL BE REPLACED BY THEINDUSTRYEQUIVALENTDOCUMENT

SPECIFIED ON THE MILITARY DOCUMENT'S CANCELLATION NOTICE. THIS APPLIES

TO THE ORIGINALAIRCRAFTMANUFACTURER'S SPECIFICIATIONS THAT ARE CITED IN

THE CRAWING, AS WELL. THE CHARACTERISTICS OF TYPE, GRADE, CLASS, ETC.

SPECIFIEDIN THECANCELLED MILITARY DOCUMENT SHALL BE MAINTAINED OR EXCEED

THOSE CHARACTERISTICS WHEN APPLYING THEINDUSTRYEQUIVALENTDOCUMENT(S).

WHEN THERE IS NO LISTED REPLACEMENT THE CONTRACTOR SHALL REQUEST AND

RECOMMEND ASUBSTITUTE DOCUMENTS FROM 508ATSS/ENM (A-10 SYSTEMS

ENGINEERING) THROUGH THE GOVERNMENT CONTRACTING OFFICIAL.

3. USE OF NORTHROP GRUMMAN SPECIFICATION Z-R701 IN CONJUNCTION WITH

MIL-STD-130 IS MANDATORY TO ENSURE THE PROPER MARKING OF THE PARTS.

(Z-R701 HAS UNLIMITED RIGHTS).

IAW BASIC DRAWING NR 77751 160D411003

REVISION NR K DTD 11/25/2014

PART PIECE NUMBER: 160D411003-96

IAW REFERENCE DRAWING NR 26512 LE160Y4100

REVISION NR A DTD 01/08/1976

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 G-F101

REVISION NR A DTD 05/03/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 Z-R701

REVISION NR C DTD 02/10/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 G-F101

REVISION NR A1 DTD 05/17/1978

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 G-F101

REVISION NR A2 DTD 12/11/1980

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 Z-R901

REVISION NR F DTD 08/04/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 26512 Z-R701

REVISION NR C1 DTD 02/10/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 26512 Z-R901

REVISION NR E1 DTD 07/08/1997

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 160D411003

REVISION NR K DTD 11/25/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 LM160D411003/3

REVISION NR J DTD 06/22/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 LE160Y4100

REVISION NR A DTD 08/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 160D411003-96

REVISION NR K DTD 05/26/2017

LINE ITEM 00007 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:014945900

SUPPORT, STRUCTURAL COMPONENT, AIRCRAFT

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RC001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD038

REFERENCE NUMBER:CS001

ENGINEERING NOTES:

THE ENGINEERING NOTES ARE ON AIR FORCE DRAWING 201308306, CAGE CODE

98747. THE APPLICABLE NOTES FOR THE MANUFACTURE OF THIS ITEM ARE CALLED

OUT IN THE REMARKS SECTION OF THE ENGINEERING DATA LIST (EDL) FOR

201308306. THE FOLLOWING NOTES APPLY: 2-4,6,11,18,28.

IAW BASIC DRAWING NR 77751 160D513105

REVISION NR F DTD 04/06/1990

PART PIECE NUMBER: 160D513105-17

IAW REFERENCE DRAWING NR 77751 DS436

REVISION NR F DTD 04/11/1969

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 G-F101

REVISION NR C DTD 09/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 Z-R701

REVISION NR C DTD 02/10/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 Z-R901

REVISION NR F DTD 08/04/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 Z-R701

REVISION NR C1 DTD 02/10/1998

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 LM160D513105/1

REVISION NR F DTD 11/04/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98747 201308306

REVISION NR DTD 05/08/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 LE160Y5100

REVISION NR B DTD 09/30/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 77751 LE160Y5100

REVISION NR B DTD 08/25/2011

LINE ITEM 00008 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:015379690

PID Text Error/Missing - Please Review NSN

PREP FOR DELIVERY

LINE ITEM 00009 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:015561668

BRACKET,STRUCTURAL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZDL01

REFERENCE NUMBER:ZDL57

EXCEPTION DATA:

1. PART MARKING PER MIL-STD-130, RUBBER STAMP PER BAC 5307. MARKING MUST

INCLUDE NATIONAL STOCK NUMBER, PART NUMBER, CURRENT DESIGN AUTHORITY

CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE (-----), DATE OF

MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL NOT BE MARKED WITH

THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

2. DELETE REFERENCE TO D2-5000, BAC 5005 AND 32-2727.

3. USE SAE AMS QQ-A-250/5 IN LIEU OF QQ-A-250/5.

4. HEAT TREAT TO T42 IN LIEU OF T4.

5. DO NOT DRILL ANY FASTENER, RIVET OR PILOT HOLES.

6. SRF-2.115 FINISH CODE DEFINED: CHEMICAL TREAT TO MEET THE

REQUIREMENTS OF MIL-DTL-5541, CLASS IA OR ANODIZE TO MEET THE

REQUIREMENTS OF MIL-A-8625, TYPE I, CLASS 1. APPLY

ONE COAT OF MIL-PRF-23377, TYPE I, CLASS C2, ACCORDING TO MANUFACTURER'S

APPLICATION INSTRUCTIONS AND MIL-F-18264

...END OF EXCEPTIONS...

REFERENCE NUMBER:ZD057

IAW BASIC DRAWING NR 81205 65-23320

REVISION NR B DTD 12/05/1974

PART PIECE NUMBER: 65-23320-8

IAW REFERENCE DRAWING NR 81205 BAC5602

REVISION NR AF DTD 06/15/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5602

REVISION NR AF DTD 08/28/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR M DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 10/13/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 65-23320

REVISION NR B DTD 05/28/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 65-23320/2

REVISION NR B DTD 12/09/1974

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 06/23/2014

LINE ITEM 00013 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

NSN:015562094

BRACKET,STRUCTURAL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZDL01

REFERENCE NUMBER:ZDL57

EXCEPTION DATA:

1. PART MARKING PER MIL-STD-130, METHOD PER THE DRAWING REQUIREMENTS AND

BAC 5307. MARKING MUST INCLUDE NATIONAL STOCK NUMBER, PART NUMBER,

CURRENT DESIGN AUTHORITY CODE (98748), ACTUAL MANUFACTURER'S CAGE CODE

(-----), DATE OF MANUFACTURE, AND "FOR MILITARY USE ONLY". PARTS WILL

NOT BE MARKED

WITH THE ORIGINAL DESIGN AUTHORITY (BOEING) CAGE CODE.

2. DELETE REFERENCE TO BAC 5005 AND D2-5000.

3. USE ASME Y14.5 IN LIEU OF USAS Y14.5.

4. PART TO BE FURNISHED WITHOUT RIVET, PILOT OR FASTENER HOLES.

5. USE SAE AMS-QQ-A-250 AND SAE AMS-QQ-A-250/5 IN LIEU OF QQ-A-250/5.

6. USE AMS 2770 IN LIEU OF BAC 5602.

7. SRF-2.115 FINISH CODE DEFINED: CHEMICAL TREAT TO MEET THE

REQUIREMENTS OF MIL-DTL-5541, CLASS 1A OR ANODIZE TO MEET THE

REQUIREMENTS OF MIL-A-8625, TYPE I, CLASS 1. APPLY ONE COAT OF

MIL-PRF-23377, TYPE I, CLASS C2, ACCORDING TO FINISH MANUFACTURER'S

APPLICATION INSTRUCTIONS AND MIL-F-18264.

8. ALL SPECIAL PROCESSES IDENTIFIED BY 424 SCMS IN DRAWING 20145214

SHALL BE PERFORMED BY ORGANIZATIONS MAINTAINING NADCAP CERTIFICATION FOR

THE RELEVANT SPECIAL PROCESS. ONLY THOSE PROCESSES HIGHLIGHTED IN YELLOW

IN DRAWING 20145214 ARE IDENTIFIED BY 424 SCMS AS REQUIRING NADCAP

CERTIFIED

PROCESSORS.

...END OF EXCEPTIONS...

REFERENCE NUMBER:ZD057

IAW BASIC DRAWING NR 81205 65-23320

REVISION NR B DTD 12/05/1974

PART PIECE NUMBER: 65-23320-9

IAW REFERENCE DRAWING NR 81205 BAC5307

REVISION NR U DTD 11/27/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 65-23320

REVISION NR B DTD 05/28/1982

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 65-23320/2

REVISION NR B DTD 12/09/1974

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/01/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98748 20145214

REVISION NR DTD 02/03/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-2

REVISION NR H DTD 09/15/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300-1

REVISION NR H DTD 06/23/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5307-1

REVISION NR D DTD 01/15/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81205 BAC5300

REVISION NR N DTD 12/05/2016

LINE ITEM 00014 TYPE OF COVERAGE: CUSTOMER DIRECT, CONUS

PKGING DATA-QUP:001

SHALL BE PACKAGED IN ACCORDANCE WITH HAZARDOUS

MATERIALS PACKAGING REQUIREMENTS.

PACKAGING: PACKAGING FOR HAZARDOUS MATERIALS

SHALL COMPLY WITH APPLICABLE REGULATIONS, I.E.,

TITLE 49 CODE OF FEDERAL REGULATIONS,

INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO)

TECHNICAL INSTUCTIONS (EXCLUDING PARAGRAPH 1.4

OF CHAPTERS 1 AND 3), AND INTERNATIONAL MARITIME

DANGEROUS GOODS CODE (IMDG). BOTH ICAO AND IMDG

COMPLY WITH UNITED NATIONS (UN) RECOMMENDATIONS

ON TRANSPORT OF DANGEROUS GOODS. WHEN A);

CONTRACT/ORDER FOR HAZARDOUS MATERIALS REQUIRES

SHIPMENT THROUGH A MILITARY AERIAL PORT FOR

TRANSPORT VIA MILITARY AIRCRAFT, PACKAGING SHALL

COMPLY WITH DLAI 4145.3, PREPARING HAZARDOUS

MATERIALS FOR MILITARY AIR SHIPMENT.

LABELING AND MARKING: ALL INTERIOR AND EXTERIOR

CONTAINERS SHALL BE LABELED AND MARKED AS

SPECIFIED IN THE REFERENCED PRODUCT

SPECIFICATION, AND/OR AS SPECIFIED IN SECTION D

OF THE CONTRACT OR ORDER. IN ADDITION, ALL

LABELING AND MARKING SHALL COMPLY WITH THE

REQUIREMENTS OF MIL-STD-129, 49 CFR, 29 CFR,

AND, AS APPLICABLE, ICAO TECHNICAL INSTRUCTIONS,

IMDG ANNEX 1, AND/OR DLAI 4145.3.

CERTIFICATION: ALL PACKAGING PERFORMANCE TEST

REQUIREMENTS SHALL BE SUPPORTED BY CERTIFICATES

AND REPORTS ATTESTING TO DATE OF TESTING AND

DATA RESULTS OBTAINED FROM TESTING. THE

CONTRACTOR'S SIGNED CERTIFICATION THAT PACKAGE

CONFIGURATION MEETS 49 CFR, AND, AS APPLICABLE,

ICAO, IMDG AND/OR DLAI 4145.3 REQUIREMENTS,

SHALL BE INCLUDED ON THE DD FORM 250 (MATERIAL

INSPECTION AND RECEIVING REPORT), OR ANY

SUITABLE ALTERNATE COMMERCIAL PACKING LIST. ALL

CERTIFICATES/REPORTS SHALL BE AVAILABLE FOR

INSPECTION BY AUTHORIZED U. S. GOVERNMENT

REPRESENTATIVES FOR A PERIOD OF NOT LESS THAN 3

YEARS FROM THE DATE OF SHIPMENT.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS,

IN ACCORDANCE WITH FED-STD-313, THE MATERIAL

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

Markings Paragraph When ASTM D3951, Commercial Packaging is specified, the following apply:

•,,All Section “D” Packaging and Marking Clauses take precedence over

ASTM D3951.

•,,In addition to requirements in MIL-STD-129, when Commercial Packaging is used, the Method of Preservation for all MIL-STD-129 marking and labeling shall be “CP” Commercial Pack.

•,,The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) as specified in the contract take precedence over QUP in ASTM D3951.

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND

NON-MANUFACTURERS)

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER CS001

THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO

EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND

ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH

JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF

STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL

AGREEMENTS.

TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, MILITARY CRITICAL

TECHNICAL DATA AGREEMENT, FORM IS AVAILABLE AT THE WORLD WIDE WEB

ADDRESS:

https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/defaul t.aspx

OR BY WRITING TO:

DLA LOGISTICS INFORMATION SERVICE

FEDERAL CENTER

74 WASHINGTON AVE., NORTH

BATTLE CREEK, MI 49037-3084

TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A

CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT,

DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY

THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN

EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 EXEMPTIONS OF

GENERAL APPLICABILITY, AND/OR EAR PART 740 ARE APPLICABLE.

NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE

REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT

OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE

EXPORT CONTROLLED TECHNICAL DATA.

NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO

THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA

UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY

PERMITTED BY DODD 5230.25.

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER ZD057

DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE

TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN

THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR

HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM),

THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM

DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON

STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS

OF THE UNDIMENSIONED DRAWING.

THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR

DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE

DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE

INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND

(+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-)

0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH

DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO

WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY.

REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED

TO WITHIN (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY.

REFERENCE NUMBER ZDL01

A BOEING RIGHTS GUARD LICENSE AGREEMENT 01 RESTRICTED TECHNICAL DATA

PACKAGE EXISTS FOR THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION

CONDITIONS APPLY.

VENDORS MUST COMPLETE AND RETURN THE FORMS LOCATED IN

THE "01 BOEING RIGHTS GUARD" LICENSE AGREEMENT FOLDER AVAILABLE AT

https://pcf1x.bsm.dla.mil/cFolders

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RC001

RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)

REFERENCE NUMBER ZD038

Government First Article Preproduction approval required. Testing will be in accordance with applicable drawings, specifications and/or Engineering instructions. The first article offered shall be manufactured at the facilities in which production quantities are procured and produced under this contract. When submitting the first article(s) for government testing, a copy of the contract and all applicable drawings, specifications, engineering instructions, certifications, and inspection sheets shall be provided. Upon receipt and evaluation of the test report from the responsible government testing location, the contracting officer will provide final notification to the manufacturer. Any questions or concerns regarding the first article test requirements must be submitted through the contracting officer.

Additional Wide Area Workflow (WAWF) instructions for government first article test CLIN: The contractor shall code the receiving report for government first article test CLIN in WAWF as Follows:

A: Inspection at origin (Source) - Enter the DCMA office DODAAC listed on page 1 of the contract.

B: Acceptance by other - Enter the issue by office DODAAC listed on page 1 of the contract.

C: Ship to code - Enter the DODAAC of the test facility listed for the government first article test CLIN in the contract (See FAR Clause 52.209-4).

FIRST ARTICLE TEST MARKING INSTRUCTIONS:

FAT sample(s) packaging shall be clearly marked "FIRST ARTICLE TEST EXHIBIT(S) DO NOT POST TO STOCK!!!" in largest font possible with contrasting color to the packaging. Marking shall be located adjacent to the Package Shipping Label side and on at least one additional side of the package.

REFERENCE NUMBER ZD058

NOTE: A STABLE BASE DRAWING FORMS A PART OF

THE DATA PACKAGE REQUIRED FOR PERFORMANCE AND

AS SUCH WILL BE FORWARDED TO THE SUCCESSFUL

OFFEROR WITHIN 30 DAYS AFTER AWARD OF THE

CONTRACT.

IF THE STABLE BASE DRAWING HAS NOT BEEN

RECEIVED WITHIN 30 DAYS AFTER AWARD, NOTIFY THE

PROCUREMENT CONTRACTING OFFICER.

SPECIAL INSTRUCTIONS:

WHEN THE USE OF STABLE BASE DRAWINGS ARE

REQUIRED, THE FOLLOWING SHALL APPLY:

A: STABILIZE BY ALLOWING THE STABLE BASE

DRAWING TO REST FLAT AND UNRESTRAINED ON A FLAT

SURFACE OVERNIGHT AT ROOM TEMPERATURE PRIOR TO

USE.

B. DO NOT STRETCH OR OTHERWISE APPLY STRESS.

C. CHECK THE DIMENSIONAL ACCURACY OF THE GRID

LINES. THE DIMENSION BETWEEN ADJACENT GRID

LINES MUST BE WITHIN (+,-) 0.005 INCHES. THE

GRID LINES SHALL BE MEASURED VERTICALLY,

HORIZONTALLY AND DIAGONALLY, TO INSURE THAT THE

GRIDS ARE WITHIN THE TOLERANCE OF (+,-) 0.005

INCHES. THE TOLERANCE IS ACCUMULATED OVER THE

LENGTH AND WIDTH OF THE STABLE BASE DRAWING.

D. TRAMMEL POINTS SHALL BE MEASURED TO WITHIN

CENTERLINE 0.010.

E. WHEN ROLLING STABLE BASE DRAWINGS, DO NOT

ROLL LESS THAN 3 INCHES IN DIAMETER.

F. IF THE ABOVE TOLERANCE POINTS PROVE TO BE

INACCURATE, RECORD THE DISCREPANCIES

IMMEDIATELY AND NOTIFY IN WRITING THE

ADMINISTRATIVE CONTRACTING OFFICER (ACO).

G. THE CONTRACTOR WILL BE ADVISED AT TIME OF

ISSUANCE OF THE STABLE BASE DRAWING WHEN ITS

RETURN IS REQUIRED. WHEN SO ADVISED, THE

CONTRACTOR WILL:

(1) RETURN THE STABLE BASE DRAWING (IF IT

HAS NOT BEEN DAMAGED/DESTROYED IN THE

MANUFACTURING PROCESS) BY TRACEABLE MEANS TO:

DLA AVIATION

ATTN: DLA AVIATION-VAAA (MYLAR SECTION)

RICHMOND, VA 23297-5615

(2) CERTIFY TO THE ACO OR QUALITY ASSURANCE

REPRESENTATIVE (QAR) THAT THE STABLE BASE

DRAWING HAS EITHER BEEN RETURNED TO DSCR OR WAS

DAMAGED/DESTROYED DURING MANUFACTURE.

CERTIFICATION SHOULD REFERENCE THE CONTRACT

NUMBER, DRAWING NUMBER AND SHEET.

REFERENCE NUMBER ZDL57

A BOEING LICENSE AGREEMENT 31 RESTRICTED TECHNICAL DATA PACKAGE EXISTS

CONTAINING BOEING PROPRIETARY PROCESS SPECIFICATIONS AND STANDARDS FOR

THIS ITEM. DATA NON-DISCLOSURE AND DATA DESTRUCTION CONDITIONS APPLY.

VENDORS

MUST COMPLETE AND RETURN THE FORMS LOCATED IN THE "BOEING" LICENSE

AGREEMENT FOLDER AVAILABLE AT https://pcf1x.bsm.dla.mil/cFolders