SPE2DH19Q0009.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE2DH-19-Q-0009

2. DATE ISSUED

2018 OCT 16

3. REQUISITION/PURCHASE REQUEST NO.

See Schedule

RATING

DLA TROOP SUPPORT

MEDICAL SUPPLY CHAIIN FSH

700 ROBBINS AVENUE

PHILADELPHIA PA 19111

USA

Buyer: Patrick Milligan DPM0036 Tel: 215-737-2533 Email: Patrick.Milligan@dla.mil

6. DELIVER BY (Date)

30 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 OCT 19

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 35 PAGES

SPE2DH-19-Q-0009

CONTINUED ON NEXT PAGE

The provisions/clauses as indicated in the DLA Master Solicitation for Solicitations {version _51 dated _October 15th, 2018} and resulting awards are hereby applicable and incorporated by reference. The Master Solicitation can be found on the Web at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. Please also reference additional clauses included on latter pages of the subject order.

NOTE - The below list of clauses are a part of the DLA Master Solicitation with respect to this requirement, however they are being highlighted below for their importance with respect to completion of the order successfully:

FAR 52.211-16 - VARIATION IN QUANTITY

DFARS 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. COMPLIANCE WITH SAFEGUARDING

COVERED DEFENSE INFORMATION CONTROLS (DEVIATION 2016-O0001)(DEC 2015)

DFARS 252.204-7012 (Oct 2016) Safeguarding Covered Defense Information and Cyber Incident Reporting

DFARS 252.232-7006 - WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS

Procurement Notes C01, C03, C03, E05, H04, L01, L06 AND L08 apply to this acquisition and also can be found at http:// www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx NOTE: All shipments must list the TCN (Transportation Control Number), Purchase Order number, Ship to address and Mark for Information. The TCN number is a vital piece of information that must be visible on the shipping label that is placed on the outside of the package or pallet. Inclusion of this noted information is also acceptable on a packslip provided it is applied to the outside of the package. Failure to affix the TCN number and purchase order number will result in a frustrated shipment. When the order contains multiple Contract Line Item Numbers (CLINs), each shipment must cite the TCN number, the Purchase Order (PO) number and the associated CLIN. This information is required to be cited to ensure the material is received properly. Any questions, please contact Patrick Milligan, Acquisition Specialist, at 215 737-2533.

NOTE 2: PLEASE PROVIDE TO THE BUYER/CONTRACTING OFFICER PROOF OF DELIVERY/TRACKING INFORMATION UPON SHIPMENT OF THE MATERIAL - EMAIL CORRESPONDENCE IS ACCEPTABLE. Buyer's email: patrick.milligan@dla.mil_______;

Please note that RapidGate is currently a requirement for access to some military bases; however, these and other locations may require enrollment in other security programs at some time in the future. In this event, the contractor is responsible for obtaining all required enrollments and clearances for each of their drivers as soon as they receive notice of such a requirement.

Many bases currently require enrollment in RapidGate and will not allow entry without RapidGate clearance. During the contract implementation period, the Contractor must contact all customer locations to determine whether enrollment in RapidGate or another security program is required for access to each location. If RapidGate or other security enrollment is required, the contractor must take all necessary steps to obtain this in time for the start of performance under this contract. Failure to have RapidGate clearance may result in a vendor being turned away from the base and being unable to complete delivery. The contractor is responsible for the additional cost for RapidGate enrollment and must ensure that a RapidGate enrolled driver is available for all deliveries. We currently estimate that RapidGate enrollment will cost about $250 per company and $200 per enrolled employee for 1 year of access to multiple locations, but the cost of RapidGate or other security enrollment may vary, so the contractor should contact RapidGate to determine its own costs. If more than one driver is required, RapidGate enrollment must be obtained for each driver. Note that enrollment can take several weeks, so an awardee that is not already enrolled must begin enrollment at the time of award notification at the latest. If difficulty or delay in enrollment in RapidGate is encountered during the implementation period, the contractor MUST contact RapidGate and/or the Security Officer at the applicable customer locations to resolve any issues with processing RapidGate enrollment so that the contractor will be able to deliver as required.

For additional information regarding RapidGate, including enrollment instructions, please visit their website at www.

rapidgate.com, 1-877-RAPIDGate.

52.204–23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (JULY 2018)

(a) Definitions. As used in this clause— Covered article means any hardware, software, or service that—

(1) Is developed or provided by a covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a covered entity.

Covered entity means—

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab;

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

(b) Prohibition. Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115–91) prohibits Government use of any covered article. The Contractor is prohibited from—

(1) Providing any covered article that the Government will use on or after October 1, 2018; and

(2) Using any covered article on or after October 1, 2018, in the development of data or deliverables first produced in the performance of the contract.

(c) Reporting requirement.

(1) In the event the Contractor identifies a covered article provided to the Government during contract performance, or the Contractor is notified of such by a subcontractor at any tier or any other source, the Contractor shall report, in writing, to the Contracting Officer or, in the case of the Department of Defense, to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 35 PAGES

CONTINUED ON NEXT PAGE

at https://dibnet.dod.mil.

(2) The Contractor shall report the following information pursuant to paragraph (c)(1) of this clause:

(i) Within 1 business day from the date of such identification or notification: The contract number; the order number(s), if applicable; supplier name; brand; model number (Original Equipment Manufacturer (OEM) number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended.

(ii) Within 10 business days of submitting the report pursuant to paragraph (c)(1) of this clause: Any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of a covered article, any reasons that led to the use or submission of the covered article, and any additional efforts that will be incorporated to prevent future use or submission of covered articles.

(d) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for the acquisition of commercial items.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: 6530-00-299-8517

ITEM DESCRIPTION:

COT, FOLDING, HOSPITAL, ALUMINUM

UNIT ISSUE:EACH (EA/ONE COT CONSTITUTES ONE UNIT)

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

BIDDER: PLEASE SPECIFY SOURCE AND PART

NUMBER BEING SUPPLIED.

ADEQUATE DATA FOR THE EVALUATION OF

ALTERNATE OFFERS IS NOT AVAILABLE AT

THE PROCUREMENT AGENCY. THE OFFEROR

MUST PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

SPECIFICATION REQUIREMENTS:

SHALL BE IN ACCORDANCE WITH MIL-C-36465A DATED

25 JUNE 1989 EXCEPT AS FOLLOWS:

2.1 GOVERNMENT DOCUMENTS. UNDER"SPECIFICATIONS,

MILITARY", DELETE MIL-C-496, ENTIRELY;

DELETE MIL-W-530 ENTIRELY, AND SUBSTITUTE

"MIL-W-4088, WEBBING, TEXTILE, WOVEN NYLON";

DELETE MIL-T-43566, AND SUBSTITUTE "MIL-T-5038,

TAPE, TEXTILE AND WEBBING, TEXTILE, REINFORCING

NYLON". UNDER "SPECIFICATIONS FEDERAL", DELETE

ALL REFERENCE TO PPP-B-601 AND PPP-B-636

ENTIRELY. UNDER "STANDARDS MILITARY", DELETE

ALL REFERENCE TO MIL-STD-129 AND MIL-STD-794

ENTIRELY. ADD THE FOLLOWING:

"OTHER GOVERNMENT DOCUMENTS.

"MEDICAL MARKING STANDARD NO. 1"

PARA. 2.2 NON-GOVERNMENT PUBLICATIONS. ADD THE

FOLLOWING:

"ASTM INTERNATIONAL

"A 228/A 228M - STANDARD SPECIFICATION FOR STEEL

. WIRE, MUSIC SPRING QUAITY.

"A 679/A 679M - STANDARD SPECIFICATION FOR STEEL

. WIRE, HIGH TENSIL STRENGTH,HARD DRAWN.

"D 1974 - STANDARD PRACTICE FOR METHODS OF

. CLOSING, SEALING, AND REINFORCING

. FIBERBOARD SHIPPING BOXES.

"D 5118 - STANDARD PRACTICE FOR FABRICATION OF

. FIBERBOARD SHIPPING BOXES.

"D 6251 - STANDARD SPECIFICATION FOR WOOD-

. CLEATED PANNELBOARD SHIPPING BOXES.

"(APPLICATION FOR COPIES SHOULD BE ADDRESSED TO

ASTM INTERNATIONAL, 100 BARR HARBOR DRIVE, WEST

CONSHOHOCKEN, PA 19428-2958.)"

PARA. 3.1.2, DELETE ENTIRELY AND SUBSTITUTE:

"3.1.2 WEBBING. THE COT STRAPS, PART NO. 8 ON

DPSC DRAWING NO. 2109, SHALL BE NYLON WEBBING,

PLAIN WEAVE, 5.4 LBS./100 YARDS, COLOR O.G. 7,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

2600 POUNDS TENSILE STRENGTH. THE STRAP ENDS

SHALL BE HEAT SEALED."

3.1.4.2 HINGE ASSEMBLY. AFTER FIRST SENTENCE,

INSERT "ALSO AS AN ALTERNATE, THE HINGE ASSEMBLY

SHALL BE FABRICATED FROM TENZALOY-40-E."

3.1.4.6 END CLIPS. DELETE PARAGRAPH ENTIRELY.

PARA. 3.1.5, DELETE ENTIRELY AND SUBSTITUTE:

"3.1.5 BINDING. EDGE BINDING SHALL BE NYLON

REINFORCING TAPE CONFORMING TO MIL-T-5038,

CLASS 2, TYPE III, COLOR O.G. NO. 106, 0.20

OUNCES PER LINEAR YARD."

3.2 CONSTRUCTION. AT THE END OF THE PARAGRAPH

ADD THE FOLLOWING: "AS AN ALTERNATE, COMPONENTS

NO. 1, 2, AND 3 SPECIFIED ON DPSC DRAWING NO.

2109, SHEET NO. 2, SHALL BE FABRICATED FROM TYPE

6061-T6 ALUMINUM ALLOY."

3.2.2 CONSTRUCTION DETAILS. AFTER "TOLERANCES

SHALL BE AS SHOWN ON THE DRAWING UNLESS

OTHERWISE SPECIFIED", INSERT "THE TIE STRAP

WIDTH OF 5/8 INCH, COMPONENT NO. 8, SHEET NO. 3,

SHALL HAVE A TOLERANCE OF +1/16, -1/32 INCH."

DELETE THE 7TH SENTENCE OF THE PARAGRAPH

CONCERNING "END CLIPS" ENTIRELY.

3.3.4 ENAMEL. IN THE LAST SENTENCE, DELETE

"LUSTERLESS OLIVE DRAB CONFORMING TO COLOR

X34087" AND SUBSTITUTE "SEMIGLOSS OLIVE DRAB

CONFORMING TO COLOR 24087". AT THE END OF THE

PARAGRAPH, ADD "AS AN ALTERNATE TO THE ENAMEL,

EPOXY POWDER FORMULATED FOR ELECTROSTATIC SPRAY

EQUIPMENT APPLICATION SHALL BE ACCEPTABLE. THE

EPOXY COATING SHALL BE 1.5 TO 2.5 MILS THICK,

FAST CURING, AND SHALL PROVIDE SUPERIOR ADHESION

WITH A TOUGH MAR-RESISTANT FINISH THAT

WITHSTANDS HIGH IMPACT WITHOUT CHIPPING OR

CRACKING.

PARA. 3.3.5, DELETE ENTIRELY AND SUBSTITUTE:

"3.3.5 BUCKLES. THE BUCKLES SHALL HAVE A BLACK

OXIDE FINISH."

DELETE PARA. 4.4.1.2 ENTIRELY AND SUBSTITUTE:

"4.4.1.2 WEBBING. THE WEBBING SHALL BE TESTED

IN ACCORDANCE WITH THE TEST PROCEDURES OF

MIL-W-4088."

DELETE PARAS. 4.4.1.2.1 AND 4.4.1.2.2 ENTIRELY

AND SUBSTITUTE:

"4.4.1.2.1 TAPE. THE TAPE SHALL BE TESTED IN

ACCORDANCE WITH THE TEST PROCEDURES OF

MIL-T-5038."

PARA. 4.5, LAST LINE, DELETE "MIL-STD-129" AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE PARAS. 5.1 THROUGH 5.3.1 ENTIRELY AND

SUBSTITUTE:

"5.1 PRESERVATION. PRESERVATION SHALL BE

MILITARY, AS SPECIFIED (SEE 6.2).

"5.1.1 MILITARY.

"5.1.1.1 PRESERVATIVES. PRESERVATIVES SHALL

NOT BE USED.

"5.1.1.2 UNIT. EACH (EA). ONE COT, AS

AS SPECIFIED, CONSTITUTES ONE UNIT. EACH COT

SHALL BE PACKAGED IN A BOX CONFORMING TO

ASTM D 5118, CLASS DOMESTIC. CLOSURE OF BOX

SHALL BE IN ACCORDANCE WITH ASTM D 1974,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

CLOSURE METHOD 1F.

5.1 PACKING. PACKING SHALL BE LEVEL A OR B,

AS SPECIFIED (SEE 6.2).

"5.2.1 LEVEL A. FOUR UNITS SHALL BE PACKED IN

AN EXTERIOR CONTAINER DESIGNED FOR A TYPE 2 LOAD

AND CONFORMING TO ASTM D 6251, CLASS 2,

PPP-B-621, CLASS 2, OR ASTM D 5118, CLASS

WEATHER-RESISTANT. CLOSURE AND STRAPPING SHALL

BE AS SPECIFIED IN THE APPLICABLE SPECIFICATION,

EXCEPT CLOSURE OF CONTAINERS CONFORMING TO

ASTM D 5118 SHALL BE AS SPECIFIED IN

ASTM D 1974, CLOSURE 1D.

"5.2.1.1 CASE LINER. EACH MILITARY WOOD BOX

SHALL BE LINED WITH A WATERPROOF CASE LINER

CONFORMING TO MIL-L-10547. CLOSURE AND SEALING

SHALL BE AS SPECIFIED IN THE LINER

SPECIFICATION. CASE LINER SHALL NOT BE REQUIRED

FOR FIBERBOARD BOXES. EACH FIBERBOARD BOX SHALL

BE WATER-RESISTANT AS SPECIFIED IN ASTM D 1974.

"5.2.2 LEVEL B. FOUR UNITS SHALL BE PACKED IN

AN EXTERIOR CONTAINER DESIGNED FOR A TYPE 2 LOAD

AND CONFORMING TO ASTM D 6251, CLASS 1,

PPP-B-621, CLASS 1, OR ASTM D 5118, CLASS

DOMESTIC. CLOSURE SHALL BE AS SPECIFIED IN THE

APPLICABLE SPECIFICATION, EXCEPT CLOSURE OF

CONTAINERS CONFORMING TO ASTM D 5118 SHALL BE AS

SPECIFIED IN ASTM D 1974, CLOSURE 1E.

"5.2.3 PACKING VARIATION PERMITTED. IF THE

REQUIRED NUMBER OF UNITS TO BE SHIPPED IS LESS

THAN THE NUMBER OF UNITS SPECIIFED TO BE

OVERPACKED IN AN EXTEIROR CONTAINER, SUCH UNITS

SHALL BE PACKED IN AN EXTERIOR CONTAINER OF

SUITABLE SIZE AND DESIGN, ACCEPTABLE TO A COMMON

CARRIER, WHICH WILL INSURE SAFE DELIVERY TO

DESTINATION.

"5.2.4 UNITIZATION. COTS SHALL BE UNITIZED AS

SPECIFIED IN THE CONTRACT OR ORDER.

"5.3 MARKING.

"5.3.1 IDENTIFICATION MARKING. EACH COT SHALL

BE MARKED AS SPECIFIED IN PARA. 3.4.

"5.3.2 UNIT, EXTERIOR (SHIPPING) CONTAINER AND

UNITIZED LOAD. EACH UNIT, EXTERIOR (SHIPPING)

CONTAINER AND UNITIZED LOAD SHALL BE MARKED AS

SPECIFIED IN MEDICAL MARKING STANDARD NO. 1."

DPSC DWG. 2109, SHEET 1, BILL OF MATERIALS:

PART NO. 1,2,3: UNDER "DESCRIPTION" DELETE THE

ALUMINUM ALLOY TYPE "6062-T6" AND SUBSTITUTE

"6061-T6".

PART NO. 4: HINGE ASSEMBLY, UNDER "DESCRIPTION".

ADD "AS AN ALTERNATE, CASTING MATERIAL SHALL BE

TENZALOY-40-E.".

PART NO. 5: UNDER "DESCRIPTION" FOR THE SPRING

WIRE, DELETE FIRST SENTENCE AND SUBSTITUTE

"1/4 DIA. SPRING WIRE FORM STEEL, ASTM A 228/

A 228M OR ASTM A 679/A 679M, ZINC PLATED, WITH

ZINC PLATED CARBON STEEL WASHER AND ELASTIC

LOC NUT."

PART NO. 8: UNDER "DESCRIPTION", DELETE "& END

CLIPS".

PART NO. 9: UNDER"DESCRIPTION",DELETE "CADMIUM"

AND SUBSTITUTE "ZINC".

PART NO. 10: UNDER "DESCRIPTION", DELETE

"CAD" AND SUBSTITUTE "ZINC".

6530-00-299-8517 18 JAN 2000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

FIRST ARTICLE REQUIRED.

FIRST ARTICLE: WHEN SPECIFIED IN THE PROCUREMENT DOCUMENT<(>,<)>

THE CONTRACTOR SHALL FURNISH SAMPLE UNIT(S) FOR THE FIRST ARTICLE

INSPECTION AND APPROVAL. SEE 4.1-4.5 WITHIN THE MIL-C-36465A

DATED 25 JUNE 1989.

Casting/forging may be required to manufacture this NSN. If a casting/forging is required, tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C&E Supply Chains) DSCR.AFCAT@dla.mil; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil

THIS ITEM IS NOT REGULATED BY THE FDA.

NSN 6530-00-299-8517, 5.24.2018

IAW BASIC SPEC NR MIL-C-36465A

REVISION NR A DTD 06/25/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 89875 2109

REVISION NR K5 DTD 09/20/2006

PART PIECE NUMBER:

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 6530-00-299-8517 89.000 EA $ ________________ $ ________________

COT,FOLDING

,HOSPITA

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1D AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

REV DATED 03/30/1988

SUPPLEMENTAL INSTRUCTIONS

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

PACKAGING AND PACKING SHALL BE

. PACKAGING - MILITARY

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

. PACKING - LEVEL B

IN ACCORDANCE WITH APPLICABLE SPECIFICATION

CITED HEREIN.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

. IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

. IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

COPIES ARE ALSO AVAILABLE ONLINE AT

HTTP://QUICKSEARCH.DLA.MIL/.

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE

CURRENTLY APPLICABLE TO NSNS IN FSCS

6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS:

UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE

UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT

REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN<(>,<)>

PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE)

SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED

SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1 FOR

PLACEMENT OF ALL REQUIRED MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE

INTERPRETATION (HRI).

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER,

TOGETHER WITH DELIVERY ORDER NUMBER, WHEN

APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE

BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND

REPLACED BY COMMERCIAL BAR CODE STANDARD

ISO/IEC 16388 (INFORMATION TECHNOLOGY -

AUTOMATIC IDENTIFICATION AND DATA CAPTURE

TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE

39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR

PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW

YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE

CURRENTLY APPLICABLE TO NSNS IN FSCS

6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS:

UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE

UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT

REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN<(>,<)>

PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE)

SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED

SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1 FOR

PLACEMENT OF ALL REQUIRED MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE

INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER,

TOGETHER WITH DELIVERY ORDER NUMBER, WHEN

APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE

BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND

REPLACED BY COMMERCIAL BAR CODE STANDARD

ISO/IEC 16388 (INFORMATION TECHNOLOGY -

AUTOMATIC IDENTIFICATION AND DATA CAPTURE

TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE

39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR

PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW

YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 35 PAGES

CONTINUED ON NEXT PAGE

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION<(>,<)>

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES

PRECEDENCE." IN ITS ENTIRETY.

PARCEL POST ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY CA 95304-5000

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY CA 95304-5000

0002 6530-00-299-8517 582.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 35 PAGES

CONTINUED ON NEXT PAGE

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1D AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

PACKAGING AND PACKING SHALL BE

. PACKAGING - MILITARY

. PACKING - LEVEL B

IN ACCORDANCE WITH APPLICABLE SPECIFICATION

CITED HEREIN.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

. IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

. IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE

CURRENTLY APPLICABLE TO NSNS IN FSCS

6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS:

UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE

UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT

REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN<(>,<)>

PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE)

SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED

SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1 FOR

PLACEMENT OF ALL REQUIRED MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE

INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER,

TOGETHER WITH DELIVERY ORDER NUMBER, WHEN

APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE

BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND

REPLACED BY COMMERCIAL BAR CODE STANDARD

ISO/IEC 16388 (INFORMATION TECHNOLOGY -

AUTOMATIC IDENTIFICATION AND DATA CAPTURE

TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE

39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR

PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW

YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE

CURRENTLY APPLICABLE TO NSNS IN FSCS

6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS:

UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE

UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT

REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN<(>,<)>

PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE)

SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED

SIDES OF THE LOAD.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 35 PAGES

CONTINUED ON NEXT PAGE

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1 FOR

PLACEMENT OF ALL REQUIRED MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE

INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER,

TOGETHER WITH DELIVERY ORDER NUMBER, WHEN

APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE

BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND

REPLACED BY COMMERCIAL BAR CODE STANDARD

ISO/IEC 16388 (INFORMATION TECHNOLOGY -

AUTOMATIC IDENTIFICATION AND DATA CAPTURE

TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE

39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR

PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW

YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION<(>,<)>

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

SW3210

DLA DISTRIBUTION DEPOT HILL

7537 WARDLEIGH RD

HILL AFB UT 84056-5734

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 35 PAGES

CONTINUED ON NEXT PAGE

DLA DISTRIBUTION DEPOT HILL

7537 WARDLEIGH RD BLDG 849W

CML 385 519 8898

0003 6530-00-299-8517 346.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

SPECIAL INSTRUCTIONS

PRESERVATION, PACKING AND MARKING SHALL BE IN

ACCORDANCE W/MIL-STD-2073-1D AS SPECIFIED IN SPECIAL

PACKAGING INSTRUCTIONS MPPWN00001

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.LANDANDMARITIME.DLA.MIL/

OFFICES/PACKAGING/PALLETIZATION_WPMNOTICE.ASP.

PACKAGING AND PACKING SHALL BE

. PACKAGING - MILITARY

. PACKING - LEVEL B

IN ACCORDANCE WITH APPLICABLE SPECIFICATION

CITED HEREIN.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

. IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

. IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE

CURRENTLY APPLICABLE TO NSNS IN FSCS

6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS:

UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE

UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT

REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN<(>,<)>

PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE)

SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED

SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1 FOR

PLACEMENT OF ALL REQUIRED MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE

INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER,

TOGETHER WITH DELIVERY ORDER NUMBER, WHEN

APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE

BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND

REPLACED BY COMMERCIAL BAR CODE STANDARD

ISO/IEC 16388 (INFORMATION TECHNOLOGY -

AUTOMATIC IDENTIFICATION AND DATA CAPTURE

TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE

39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR

PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW

YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

IN ADDITION TO ALL MARKING REQUIREMENTS

SPECIFIED HEREIN AND IN THE APPLICABLE

SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT

STOCK SHALL ALSO REQUIRE PASSIVE RFID TAGS IN

ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE

CURRENTLY APPLICABLE TO NSNS IN FSCS

6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL

MARKING STANDARD NO. 1.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS:

UNIT - BAR CODES ARE NOT REQUIRED UNLESS THE

UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT

REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN<(>,<)>

PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE)

SHALL BE SUPPLIED ON THE IDENTIFICATION MARKED

SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1 FOR

PLACEMENT OF ALL REQUIRED MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE

INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER,

TOGETHER WITH DELIVERY ORDER NUMBER, WHEN

APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE

BAR CODE SYMBOLOGY - HAS BEEN CANCELLED AND

REPLACED BY COMMERCIAL BAR CODE STANDARD

ISO/IEC 16388 (INFORMATION TECHNOLOGY -

AUTOMATIC IDENTIFICATION AND DATA CAPTURE

TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE

39). COPIES OF ISO/IEC 16388 ARE AVAILABLE FOR

PURCHASE FROM ANSI, 25 WEST 43RD STREET, NEW

YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1

(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA

TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL.

MMS NO. 1 IS ALSO AVAILABLE ONLINE AT

http://www.dla.mil/LandandMaritime/Offers/Services/ TechnicalSupport/Logistics/Packaging/MedicalPack1.aspx

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION<(>,<)>

LABELING, AND MARKING SHALL BE AS SPECIFIED IN

THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS

SPECIFIED IN-THE-CLEAR IN THE "ITEM

DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF

THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE

TO THE SECTION HEADED "PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER

THE HEADING "PREPARATION FOR DELIVERY", DELETE

THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: 6530-00-299-8517 CONT'D

INSTRUCTION (SPI). SPI'S ARE NOT PREPARED FOR

MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND

SUBSTITUTE "MEDICAL MARKING STANDARD NO. 1".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL

SHIPMENTS OF PACKAGED MATERIEL TO THE

DLA DISTRIBUTION DEPOT HILL

7537 WARDLEIGH RD

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

FREIGHT SHIPPING ADDRESS:

SW3210

DLA DISTRIBUTION DEPOT HILL

7537 WARDLEIGH RD BLDG 849W

CML 385 519 8898

Contractor First Article Test Contractor First Article Test – The number of units shown signifies the test requirement. See FAR clause 52.209-3 for the actual quantity required to be tested.

0004 0001 - S00000053 1.000 EA $ ________________ $ ________________

FOB: DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

Not Applicable

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0073676692 0001 N/A N/A N/A 11/19/2018

0002 0074230277 0001 N/A N/A N/A 12/24/2018

0003 0075603513 0001 N/A N/A N/A 02/19/2019

0004 N/A N/A N/A N/A N/A N/A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 35 PAGES

CONTINUED ON NEXT PAGE

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

SECTION D - PACKAGING AND MARKING

252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (JUN 2016) DFARS

As prescribed in 211.275-3, use the following clause:

(a) Definitions. As used in this clause --

“Advance shipment notice” means an electronic notification used to list the contents of a shipment of goods as well as additional information relating to the shipment, such as passive radio frequency identification (RFID) or item unique identification (IUID) information, order information, product description, physical characteristics, type of packaging, marking, carrier information, and configuration of goods within the transportation equipment.

“Bulk commodities” means the following commodities, when shipped in rail tank cars, tanker trucks, trailers, other bulk wheeled conveyances, or pipelines:

(1) Sand.

(2) Gravel.

(3) Bulk liquids (water, chemicals, or petroleum products).

(4) Ready-mix concrete or similar construction materials.

(5) Coal or combustibles such as firewood.

(6) Agricultural products such as seeds, grains, or animal feed.

“Case” means either a MIL-STD-129 defined exterior container within a palletized unit load or a MIL-STD-129 defined individual shipping container.

“Electronic Product Code™ (EPC)” means an identification scheme for universally identifying physical objects via RFID tags and other means.

The standardized EPC data consists of an EPC (or EPC identifier) that uniquely identifies an individual object, as well as an optional filter value when judged to be necessary to enable effective and efficient reading of the EPC tags. In addition to this standardized data, certain classes of EPC tags will allow user-defined data. The EPC Tag Data Standards will define the length and position of this data, without defining its content.

“EPCglobal®” means a subscriber-driven organization comprised of industry leaders and organizations focused on creating global standards for the adoption of passive RFID technology.

“Exterior container” means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

“Palletized unit load” means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and file:///C:/Users/RJ30041/AppData/Local/Temp/&#xD;Temp2_dfars_html%20(1).zip/dfars_html/211_2.htm

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 35 PAGES

SECTION D - PACKAGING AND MARKING (CONTINUED)

CONTINUED ON NEXT PAGE

secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

“Passive RFID tag” means a tag that reflects energy from the reader/interrogator or that receives and temporarily stores a small amount of energy from the reader/interrogator signal in order to generate the tag response. The only acceptable tags are EPC Class 1 passive RFID tags that meet the EPCglobal™ Class 1 Generation 2 standard.

“Radio frequency identification (RFID)” means an automatic identification and data capture technology comprising one or more reader/ interrogators and one or more radio frequency transponders in which data transfer is achieved by means of suitably modulated inductive or radiating electromagnetic carriers.

“Shipping container” means a MIL-STD-129 defined exterior container that meets carrier regulations and is of sufficient strength, by reason of material, design, and construction, to be shipped safely without further packing (e.g., wooden boxes or crates, fiber and metal drums, and corrugated and solid fiberboard boxes).

(b)(1) Except as provided in paragraph (b)(2) of this clause, the Contractor shall affix passive RFID tags, at the case- and palletized-unit-load packaging levels, for shipments of items that --

(i) Are in any of the following classes of supply, as defined in DoD 4140.1-R, DoD Supply Chain Materiel Management Regulation, AP1.1.11:

(A) Subclass of Class I - Packaged operational rations.

(B) Class II - Clothing, individual equipment, tentage, organizational tool kits, hand tools, and administrative and housekeeping supplies and equipment.

(C) Class IIIP - Packaged petroleum, lubricants, oils, preservatives, chemicals, and additives.

(D) Class IV - Construction and barrier materials.

(E) Class VI - Personal demand items (non-military sales items).

(F) Subclass of Class VIII - Medical materials (excluding pharmaceuticals, biologicals, and reagents - suppliers should limit the mixing of excluded and non-excluded materials).

(G) Class IX - Repair parts and components including kits, assemblies and subassemblies, reparable and consumable items required for maintenance support of all equipment, excluding medical-peculiar repair parts; and

(ii) Are being shipped to one of the locations listed at http://www.acq.osd.mil/log/sci/RFID_ship-to_locations.html or to --

(A) A location outside the contiguous United States when the shipment has been assigned Transportation Priority 1, or to --

(B) The following location(s) deemed necessary by the requiring activity:

Contract Line, Subline, or Exhibit Line Item Number Location Name City State DoDAAC

(2) The following are excluded from the requirements of paragraph (b)(1) of this clause:

(i) Shipments of bulk commodities.

(ii) Shipments to locations other than Defense Distribution Depots when the contract includes the clause at FAR 52.213-1, Fast Payment Procedures.

(c) The Contractor shall --

(1) Ensure that the data encoded on each passive RFID tag are globally unique (i.e., the tag ID is never repeated across two or more RFID tags and conforms to the requirements in paragraph (d) of this clause;

(2) Use passive tags that are readable; and

(3) Ensure that the passive tag is affixed at the appropriate location on the specific level of packaging, in accordance with MIL-STD-129 (Section 4.9.2) tag placement specifications.

(d) Data syntax and standards. The Contractor shall encode an approved RFID tag using the instructions provided in the EPC™ Tag Data http://www.acq.osd.mil/log/sci/RFID_ship-to_locations.html

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 35 PAGES

SECTION D - PACKAGING AND MARKING (CONTINUED)

CONTINUED ON NEXT PAGE

Standards in effect at the time of contract award. The EPC™ Tag Data Standards are available at http://www.epcglobalinc.org/standards/.

(1) If the Contractor is an EPCglobal™ subscriber and possesses a unique EPC™ company prefix, the Contractor may use any of the identifiers and encoding instructions described in the most recent EPC™ Tag Data Standards document to encode tags.

(2) If the Contractor chooses to employ the DoD identifier, the Contractor shall use its previously assigned Commercial and Government Entity (CAGE) code…