SPE2DH18Q0282.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE2DH-18-Q-0282

2. DATE ISSUED

2018 FEB 09

3. REQUISITION/PURCHASE REQUEST NO.

See Schedule

RATING

DLA TROOP SUPPORT

MEDICAL SUPPLY CHAIIN FSH

700 ROBBINS AVENUE

PHILADELPHIA PA 19111

USA

Buyer: Evan Lessin DEL0024 Tel: 215-737-0749 Email: Evan.Lessin@dla.mil

6. DELIVER BY (Date)

30 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 FEB 19

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 41 PAGES

SPE2DH-18-Q-0282

CONTINUED ON NEXT PAGE

The provisions/clauses as indicated in the DLA Master Solicitation for Solicitations {version _46 dated _February 07, 2018} and resulting awards are hereby applicable and incorporated by reference. The Master Solicitation can be found on the Web at http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. Please also reference additional clauses included on latter pages of the subject order.

NOTE - The below list of clauses are a part of the DLA Master Solicitation with respect to this requirement, however they are being highlighted below for their importance with respect to completion of the order successfully:

FAR 52.211-16 - VARIATION IN QUANTITY

DFARS 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. COMPLIANCE WITH SAFEGUARDING

COVERED DEFENSE INFORMATION CONTROLS (DEVIATION 2016-O0001)(DEC 2015)

DFARS 252.204-7012 (Oct 2016) Safeguarding Covered Defense Information and Cyber Incident Reporting

DFARS 252.232-7006 - WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS

Procurement Notes C01, C03, C03, E05, H04, L01, L06 AND L08 apply to this acquisition and also can be found at http:// www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

NOTE: All shipments must list the TCN (Transportation Control Number), Purchase Order number, Ship to address and Mark for Information. The TCN number is a vital piece of information that must be visible on the shipping label that is placed on the outside of the package or pallet. Inclusion of this noted information is also acceptable on a packslip provided it is applied to the outside of the package. Failure to affix the TCN number and purchase order number will result in a frustrated shipment. When the order contains multiple Contract Line Item Numbers (CLINs), each shipment must cite the TCN number, the Purchase Order (PO) number and the associated CLIN. This information is required to be cited to ensure the material is received properly. Any questions, please contact Evan Lessin, Acquisition Specialist, at 215 737-0749.

NOTE 2: PLEASE PROVIDE TO THE BUYER/CONTRACTING OFFICER PROOF OF DELIVERY/TRACKING INFORMATION UPON SHIPMENT OF THE MATERIAL - EMAIL CORRESPONDENCE IS ACCEPTABLE. KO's email is Tina.Vu@dla.mil.

Please note that RapidGate is currently a requirement for access to some military bases; however, these and other locations may require enrollment in other security programs at some time in the future. In this event, the contractor is responsible for obtaining all required enrollments and clearances for each of their drivers as soon as they receive notice of such a requirement.

Many bases currently require enrollment in RapidGate and will not allow entry without RapidGate clearance. During the contract implementation period, the Contractor must contact all customer locations to determine whether enrollment in RapidGate or another security program is required for access to each location. If RapidGate or other security enrollment is required, the contractor must take all necessary steps to obtain this in time for the start of performance under this contract. Failure to have RapidGate clearance may result in a vendor being turned away from the base and being unable to complete delivery. The contractor is responsible for the additional cost for RapidGate enrollment and must ensure that a RapidGate enrolled driver is available for all deliveries. We currently estimate that RapidGate enrollment will cost about $250 per company and $200 per enrolled employee for 1 year of access to multiple locations, but the cost of RapidGate or other security enrollment may vary, so the contractor should contact RapidGate to determine its own costs. If more than one driver is required, RapidGate enrollment must be obtained for each driver. Note that enrollment can take several weeks, so an awardee that is not already enrolled must begin enrollment at the time of award notification at the latest. If difficulty or delay in enrollment in RapidGate is encountered during the implementation period, the contractor MUST contact RapidGate and/or the Security Officer at the applicable customer locations to resolve any issues with processing RapidGate enrollment so that the contractor will be able to deliver as required.

For additional information regarding RapidGate, including enrollment instructions, please visit their website at www.

rapidgate.com, 1-877-RAPIDGate.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 41 PAGES

SUPPLIES/SERVICES: 6530-01-304-9754

ITEM DESCRIPTION:

POUCH,LIQUID ABSORBENT

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

1 PG = 1,000 EA

OVERALL HEIGHT 3.000 INCHES MINIMUM AND 5.000 INCHES MAXIMUM

OVERALL WIDTH 3.000 INCHES MINIMUM AND 5.000 INCHES MAXIMUM

ENVIRONMENTAL PROTECTION LEAK RESISTANT

ASSEMBLY METHOD HEAT SEAL

MATERIAL AND LOCATION PLASTIC SINGLE WALL

OPENING LOCATION ANY ACCEPTABLE

LIQUID CAPACITY 0.400 LITERS

REINFORCEMENT LOCATION SEAMS

POUCH LIQ ABS 400 ML DISP PLAS HEAT SEALED FLO THRU 1000S

SPECIAL FEATURES POLYMER; DISPOSABLE; FLOW THROUGH,TISSUE TYPE EXPANDING

UPON CONTACT W/AQUEOUS SOLUTION. USED FOR ABSORBING SPILLAGE OF URINE

,BLOOD AND BIOHAZARDOUS FLUIDS; 400ML LIQUID CAPACITY

STYLE DESIGNATOR PROTECTIVE

UNIT OF ISSUE-PG (PG OF 1000)

SHALL BE IN ACCORDANCE WITH

COMMERCIAL ITEM DESCRIPTION A-A-54552

DATED 20 DECEMBER 1991, EXCEPT AS FOLLOWS:

ON PAGE 1, UNDER "SALIENT CHARACTERISTICS", IN

PARA. 3, DELETE "200" AND SUBSTITUTE "160 TO

200". ALSO, ADD "FOR NSN 6530-01-307-7433".

PARA. 4, DELETE "5 X 5 INCH" AND SUBSTITUTE

"SHALL BE 3 INCHES MINIMUM AND 5 INCHES MAXIMUM".

ALSO, ADD "FOR NSN 6530-01-304-9754".

PACKAGING AND PACKING QUANTITIES.

SHIPPING CONTAINER SHALL CONTAIN ONE UNIT.

LABELING AND MARKING.

SHIPPING CONTAINER SHALL BE MARKED AS SPECIFIED

IN MEDICAL MARKING STANDARD NO. 1.

6530-01-304-9754/307-7433 12 JUNE 2007

THIS ITEM IS NOT REGULATED BY FDA

BIDDER: PLEASE SPECIFY SOURCE AND PART

NUMBER BEING SUPPLIED.

ADEQUATE DATA FOR THE EVALUATION OF

ALTERNATE OFFERS IS NOT AVAILABLE AT

THE PROCUREMENT AGENCY. THE OFFEROR

MUST PROVIDE A COMPLETE DATA PACKAGE

INCLUDING DATA FOR THE APPROVED

AND ALTERNATE PART FOR EVALUATION.

PRESERVATION, PACKAGING AND PACKING SHALL

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 41 PAGES

SUPPLY/SERVICE: 6530-01-304-9754 CONT'D

BE MARKED IN ACCORDANCE WITH COMMERCIAL PRACTICE.

SHALL BE TO A DEGREE OF PROTECTION TO PRECLUDE

DAMAGE TO CONTAINERS AND/OR CONTENTS THEREOF

UNDER NORMAL SHIPPING CONDITIONS, HANDLING AND ETC.

EACH UNIT OF ISSUE SHALL BE SUPPLIED IN A

SUITABLE SEALED COMMERCIAL CONTAINER.

LABELING AND MARKING SHALL BE MARKED AS SPECIFIED IN

MEDICAL MARKING STANDARD NO. 1A.

SAFETEC OF AMERICA INC. 00K94 P/N 42004

SAFETEC OF AMERICA INC. 00K94 P/N GREEN Z ZAFETY PAC 10 GRAMS

SIGMA TECH ENTERPRISES INC. 04KF9 P/N POUCH, LIQUID ABSORBENT

SIGMA TECH ENTERPRISES INC. 04KF9 P/N SIG55

FITZCO, INC. DBA FITZ GROUP 0HTC2 P/N 01001

Downeast Logistics LLC DBA 1RU74 P/N NBS400NB

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 6530-01-304-9754 170.000 PG $ ________________ $ ________________

POUCH,LIQUID

ABSORB

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

CLAUSE 52.247-9012 (REQUIREMENTS FOR TREATMENT

OF WOOD PACKAGING MATERIAL (WPM)) SHALL BE

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/

PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 41 PAGES

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

COPIES ARE ALSO AVAILABLE ONLINE AT

HTTP://QUICKSEARCH.DLA.MIL/

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

APPLICABLE TO ALL MEDICAL ACQUISITIONS:

PRESERVATION, PACKAGING, PACKING, UNITIZATION, LABELING, AND MARKING

SHALL BE AS SPECIFIED IN THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS SPECIFIED IN-THE-CLEAR IN

THE "ITEM DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE TO THE SECTION HEADED

"PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER THE HEADING "PREPARATION

FOR DELIVERY", DELETE THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING INSTRUCTION (SPI). SPI'S

ARE NOT PREPARED FOR MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND SUBSTITUTE "MEDICAL MARKING

STANDARD NO. 1B".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL SHIPMENTS OF PACKAGED

MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES PRECEDENCE." IN ITS

ENTIRETY.

PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT

CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL

FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS

FROM DAMAGE AND/OR BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING)

CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT

OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS

SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION

EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A

LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING

THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH

AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20

CUBIC FEET NEED NOT BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 41 PAGES

PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE

ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND

WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS SHALL ALSO REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS

CLAUSE 252.211-7006. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO

NSNS IN FSCS 6505/6508/6509/6550.

LABELING AND MARKING. MATERIAL SHALL BE LABELED AND MARKED IN

ACCORDANCE WITH COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN AND GOVERNMENT QUANTITY AND

UNIT OF ISSUE. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO NSNS IN

FSCs 6505 and 6509.

MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS

SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B ((MMS NO. 1B) DATED 30

MARCH 2017.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE

REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E.,

CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.

APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES

OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED

MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING

THE SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/

MMS NO. 1B MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN:

MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL:

DSCP.PACKAGING@DLA.MIL. MMS NO. 1B IS ALSO AVAILABLE ONLINE AT

HTTP://WWW.LANDANDMARITIME.DLA.MIL/ DOWNLOADS/PACKAGING/MMS1.PDF

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT STOCK SHALL ALSO

REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE CURRENTLY APPLICABLE TO NSNS

IN FSCS 6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B DATED

30 MARCH 2017.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS: UNIT - BAR CODES ARE NOT

REQUIRED UNLESS THE UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN, PIIN AND CAGE) SHALL BE

SUPPLIED ON THE IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION MARKED SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1B FOR PLACEMENT OF ALL REQUIRED

MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER, TOGETHER WITH DELIVERY

ORDER NUMBER, WHEN APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE BAR CODE SYMBOLOGY - HAS

BEEN CANCELLED AND REPLACED BY COMMERCIAL BAR CODE STANDARD ISO/IEC

16388 (INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA

CAPTURE TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE 39). COPIES OF

ISO/IEC 16388 ARE AVAILABLE FOR PURCHASE FROM ANSI, 25 WEST 43RD STREET,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 41 PAGES

NEW YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1B (MMS NO. 1B) MAY BE OBTAINED

BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL. MMS

NO. 1B IS ALSO AVAILABLE ONLINE AT HTTP://WWW.LANDANDMARITIME.DLA.MIL/

DOWNLOADS/PACKAGING/MMS1B.PDF

PARCEL POST ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY CA 95304-5000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY CA 95304-5000

US

0002 6530-01-304-9754 415.000 PG $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/

PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 41 PAGES

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

COPIES ARE ALSO AVAILABLE ONLINE AT

SHALL BE AS SPECIFIED IN THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS SPECIFIED IN-THE-CLEAR IN

THE "ITEM DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE TO THE SECTION HEADED

"PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER THE HEADING "PREPARATION

FOR DELIVERY", DELETE THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING INSTRUCTION (SPI). SPI'S

ARE NOT PREPARED FOR MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND SUBSTITUTE "MEDICAL MARKING

STANDARD NO. 1B".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL SHIPMENTS OF PACKAGED

MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES PRECEDENCE." IN ITS

ENTIRETY.

PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT

CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL

FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS

FROM DAMAGE AND/OR BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING)

CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 41 PAGES

OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS

SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION

EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A

LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING

THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH

AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20

CUBIC FEET NEED NOT BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND

PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE

ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND

WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS SHALL ALSO REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS

CLAUSE 252.211-7006. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO

NSNS IN FSCS 6505/6508/6509/6550.

LABELING AND MARKING. MATERIAL SHALL BE LABELED AND MARKED IN

ACCORDANCE WITH COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN AND GOVERNMENT QUANTITY AND

UNIT OF ISSUE. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO NSNS IN

FSCs 6505 and 6509.

MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS

SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B ((MMS NO. 1B) DATED 30

MARCH 2017.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE

REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E.,

CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.

APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES

OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED

MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING

THE SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/

MMS NO. 1B MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN:

MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL:

DSCP.PACKAGING@DLA.MIL. MMS NO. 1B IS ALSO AVAILABLE ONLINE AT

HTTP://WWW.LANDANDMARITIME.DLA.MIL/ DOWNLOADS/PACKAGING/MMS1.PDF

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT STOCK SHALL ALSO

REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE CURRENTLY APPLICABLE TO NSNS

IN FSCS 6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B DATED

30 MARCH 2017.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS: UNIT - BAR CODES ARE NOT

REQUIRED UNLESS THE UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN, PIIN AND CAGE) SHALL BE

SUPPLIED ON THE IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION MARKED SIDES OF THE LOAD.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 41 PAGES

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1B FOR PLACEMENT OF ALL REQUIRED

MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER, TOGETHER WITH DELIVERY

ORDER NUMBER, WHEN APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE BAR CODE SYMBOLOGY - HAS

BEEN CANCELLED AND REPLACED BY COMMERCIAL BAR CODE STANDARD ISO/IEC

16388 (INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA

CAPTURE TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE 39). COPIES OF

ISO/IEC 16388 ARE AVAILABLE FOR PURCHASE FROM ANSI, 25 WEST 43RD STREET,

NEW YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1B (MMS NO. 1B) MAY BE OBTAINED

BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL. MMS

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

0003 6530-01-304-9754 311.000 PG $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 41 PAGES

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/

PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

COPIES ARE ALSO AVAILABLE ONLINE AT

SHALL BE AS SPECIFIED IN THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS SPECIFIED IN-THE-CLEAR IN

THE "ITEM DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE TO THE SECTION HEADED

"PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER THE HEADING "PREPARATION

FOR DELIVERY", DELETE THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING INSTRUCTION (SPI). SPI'S

ARE NOT PREPARED FOR MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND SUBSTITUTE "MEDICAL MARKING

STANDARD NO. 1B".

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 41 PAGES

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL SHIPMENTS OF PACKAGED

MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES PRECEDENCE." IN ITS

ENTIRETY.

PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT

CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL

FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS

FROM DAMAGE AND/OR BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING)

CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT

OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS

SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION

EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A

LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING

THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH

AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20

CUBIC FEET NEED NOT BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND

PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE

ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND

WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS SHALL ALSO REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS

CLAUSE 252.211-7006. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO

NSNS IN FSCS 6505/6508/6509/6550.

LABELING AND MARKING. MATERIAL SHALL BE LABELED AND MARKED IN

ACCORDANCE WITH COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN AND GOVERNMENT QUANTITY AND

UNIT OF ISSUE. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO NSNS IN

FSCs 6505 and 6509.

MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS

SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B ((MMS NO. 1B) DATED 30

MARCH 2017.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE

REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E.,

CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.

APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES

OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED

MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING

THE SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/

MMS NO. 1B MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN:

MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL:

DSCP.PACKAGING@DLA.MIL. MMS NO. 1B IS ALSO AVAILABLE ONLINE AT

HTTP://WWW.LANDANDMARITIME.DLA.MIL/ DOWNLOADS/PACKAGING/MMS1.PDF

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT STOCK SHALL ALSO

REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE CURRENTLY APPLICABLE TO NSNS

IN FSCS 6505/6508/6509/6550.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 41 PAGES

MARKING SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B DATED

30 MARCH 2017.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS: UNIT - BAR CODES ARE NOT

REQUIRED UNLESS THE UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN, PIIN AND CAGE) SHALL BE

SUPPLIED ON THE IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION MARKED SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1B FOR PLACEMENT OF ALL REQUIRED

MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER, TOGETHER WITH DELIVERY

ORDER NUMBER, WHEN APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE BAR CODE SYMBOLOGY - HAS

BEEN CANCELLED AND REPLACED BY COMMERCIAL BAR CODE STANDARD ISO/IEC

16388 (INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA

CAPTURE TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE 39). COPIES OF

ISO/IEC 16388 ARE AVAILABLE FOR PURCHASE FROM ANSI, 25 WEST 43RD STREET,

NEW YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1B (MMS NO. 1B) MAY BE OBTAINED

BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL. MMS

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

NEW CUMBERLAND PA 17070-5002

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

W25G1U

W1A8 DLA DISTRIBUTION

DDSP NEW CUMBERLAND FACILITY

2001 NORMANDY DRIVE DOOR 113 TO 134

0004 6530-01-304-9754 26.000 PG $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 41 PAGES

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/

PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

COPIES ARE ALSO AVAILABLE ONLINE AT

SHALL BE AS SPECIFIED IN THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS SPECIFIED IN-THE-CLEAR IN

THE "ITEM DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF THE ACQUISITION.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 41 PAGES

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE TO THE SECTION HEADED

"PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER THE HEADING "PREPARATION

FOR DELIVERY", DELETE THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING INSTRUCTION (SPI). SPI'S

ARE NOT PREPARED FOR MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND SUBSTITUTE "MEDICAL MARKING

STANDARD NO. 1B".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL SHIPMENTS OF PACKAGED

MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES PRECEDENCE." IN ITS

ENTIRETY.

PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT

CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL

FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS

FROM DAMAGE AND/OR BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING)

CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT

OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS

SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION

EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A

LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING

THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH

AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20

CUBIC FEET NEED NOT BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND

PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE

ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND

WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS SHALL ALSO REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS

CLAUSE 252.211-7006. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO

NSNS IN FSCS 6505/6508/6509/6550.

LABELING AND MARKING. MATERIAL SHALL BE LABELED AND MARKED IN

ACCORDANCE WITH COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN AND GOVERNMENT QUANTITY AND

UNIT OF ISSUE. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO NSNS IN

FSCs 6505 and 6509.

MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS

SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B ((MMS NO. 1B) DATED 30

MARCH 2017.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE

REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E.,

CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.

APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES

OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED

MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING

THE SHIPMENT.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 41 PAGES

MIL-STD-147 IS AVAILABLE ONLINE AT HTTP://QUICKSEARCH.DLA.MIL/

MMS NO. 1B MAY BE OBTAINED BY CONTACTING DLA TROOP SUPPORT, ATTN:

MEDICAL SUPPLIER OPERATIONS, FSSB (PACKAGING), VIA EMAIL:

DSCP.PACKAGING@DLA.MIL. MMS NO. 1B IS ALSO AVAILABLE ONLINE AT

HTTP://WWW.LANDANDMARITIME.DLA.MIL/ DOWNLOADS/PACKAGING/MMS1.PDF

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL ORDERS FOR DEPOT STOCK SHALL ALSO

REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS CLAUSE 252.211-7006.

HOWEVER, EXCEPTIONS TO THIS REQUIREMENT ARE CURRENTLY APPLICABLE TO NSNS

IN FSCS 6505/6508/6509/6550.

MARKING SHALL BE AS SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B DATED

30 MARCH 2017.

MARKINGS SHALL INCLUDE BAR CODES, AS FOLLOWS: UNIT - BAR CODES ARE NOT

REQUIRED UNLESS THE UNIT IS ALSO THE EXTERIOR (SHIPPING) CONTAINER.

INTERMEDIATE PACKAGE - BAR CODES ARE NOT REQUIRED.

EXTERIOR (SHIPPING) CONTAINER - BAR CODES (NSN, PIIN AND CAGE) SHALL BE

SUPPLIED ON THE IDENTIFICATION-MARKED SIDE OF THE CONTAINER.

UNITIZED LOAD - BAR CODES (NSN, PIIN AND CAGE) SHALL BE SUPPLIED ON THE

IDENTIFICATION MARKED SIDES OF THE LOAD.

NOTES:

SEE MEDICAL MARKING STANDARD NO. 1B FOR PLACEMENT OF ALL REQUIRED

MARKINGS.

BAR CODES SHALL INCLUDE THE HUMAN READABLE INTERPRETATION (HRI).

PIIN REFERS TO THE CONTRACT OR ORDER NUMBER, TOGETHER WITH DELIVERY

ORDER NUMBER, WHEN APPLICABLE.

MIL-STD-1189B - STANDARD DEPARTMENT OF DEFENSE BAR CODE SYMBOLOGY - HAS

BEEN CANCELLED AND REPLACED BY COMMERCIAL BAR CODE STANDARD ISO/IEC

16388 (INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA

CAPTURE TECHNIQUES - CODE SYMBOLOGY SPECIFICATION - CODE 39). COPIES OF

ISO/IEC 16388 ARE AVAILABLE FOR PURCHASE FROM ANSI, 25 WEST 43RD STREET,

NEW YORK, NY 10036, WWW.ANSI.ORG.

COPIES OF MEDICAL MARKING STANDARD NO. 1B (MMS NO. 1B) MAY BE OBTAINED

BY CONTACTING DLA TROOP SUPPORT VIA EMAIL TO DSCP.PACKAGING@DLA.MIL. MMS

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY CA 95304-5000

US

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

W62G2T

W1A8 DLA DIST SAN JOAQUIN

25600 S CHRISMAN ROAD

REC WHSE 57

TRACY CA 95304-5000

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 41 PAGES

0005 6530-01-304-9754 240.000 PG $ ________________ $ ________________

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 30 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MANDATORY FOR ALL SHIPMENTS PACKED IN WOODEN

BOXES, CRATES, ETC., AND/OR UNITIZED ON WOODEN

PALLETS. HEAT TREATMENT OR KILN-DRIED HEAT

TREATMENT OF WPM SHALL BE THE ONLY METHODS

AUTHORIZED FOR SHIPMENT TO DOD LOCATIONS.

ADDITIONAL INFORMATION REGARDING DOD'S WPM

REQUIREMENT IS AVAILABLE ON THE DLA PACKAGING

WEBSITE: HTTP://WWW.DSCC.DLA.MIL/DOWNLOADS/

PACKAGING/PALLETIZATIONRQMTWPMCLAUSE.PDF

PACKAGING AND PACKING SHALL BE COMMERCIAL AS

SPECIFIED IN THE PROCUREMENT DOCUMENT.

PALLETIZATION SHALL BE IN ACCORDANCE WITH

THE LATEST EDITION OF MIL-STD-147. UNITIZED

LOADS COMMENSURATE WITH THE LEVEL OF PACKING

SPECIFIED IN THE CONTRACT OR ORDER SHALL BE

USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO

ONE DESTINATION EXCEEDS 250 LBS (EXCLUDING THE

PALLET) OR 20 CU FT. LOADS SHALL BE UNITIZED

ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS.

PALLET SHALL HAVE A LENGTH OF 40 INCHES AND A

WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING THE

PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT,

43 INCHES IN LENGTH AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS

THAN 250 LBS OR 20 CUBIC FEET NEED NOT BE

PALLETIZED.

APPLICABLE TO EQUIPMENT ITEMS HAVING A HEIGHT

OF 48 INCHES OR GREATER:

IF A PROPERLY PALLETIZED LOAD (EQUIPMENT ITEM

AND PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT

LIMITATION NEED NOT BE ADHERED TO.

APPLICABLE TO A SINGLE ITEM HAVING DIMENSIONS

EXCEEDING THE MAXIMUM PALLET LOAD LENGTH AND/OR

WIDTH DIMENSIONS:

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET

LOAD DIMENSIONS, LENGTH AND WIDTH NEED NOT BE

ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

COPIES OF THE LATEST EDITION OF MIL-STD-147 ARE

AVAILABLE FROM DLA DOCUMENT SERVICES, BLDG 4/D,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 41 PAGES

700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5094.

COPIES ARE ALSO AVAILABLE ONLINE AT

SHALL BE AS SPECIFIED IN THE APPLICABLE PROCUREMENT DOCUMENT REFERENCED

IN THE "ITEM DESCRIPTION" SECTION, AND/OR AS SPECIFIED IN-THE-CLEAR IN

THE "ITEM DESCRIPTION" AND "PACKAGING DATA" SECTIONS OF THE ACQUISITION.

THE FOLLOWING CHANGES/DELETIONS ARE APPLICABLE TO THE SECTION HEADED

"PACKAGING DATA":

DISREGARD ALL REFERENCE TO MIL-STD-2073. UNDER THE HEADING "PREPARATION

FOR DELIVERY", DELETE THE SECTION BEGINNING WITH "PKGING DATA -" AND

ENDING WITH "DATED 88090" IN ITS ENTIRETY.

DISREGARD ALL REFERENCES TO SPECIAL PACKAGING INSTRUCTION (SPI). SPI'S

ARE NOT PREPARED FOR MEDICAL ITEMS. ALL APPLICABLE PACKAGING

REQUIREMENTS ARE SPECIFIED IN THE ACQUISITION.

DELETE "MIL-STD-129" WHEREVER IT APPEARS AND SUBSTITUTE "MEDICAL MARKING

STANDARD NO. 1B".

DELETE THE PARAGRAPH BEGINNING WITH "FOR ALL SHIPMENTS OF PACKAGED

MATERIEL TO THE

GOVERNMENT" AND ENDING WITH "THE SCHEDULE TAKES PRECEDENCE." IN ITS

ENTIRETY.

PACKAGING AND PACKING SHALL BE COMMERCIAL, AS SPECIFIED HEREIN.

EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED IN A SUITABLE SEALED UNIT

CONTAINER. WHEN REQUIRED, UNIT CONTAINER SHALL CONTAIN INTERNAL

FITTINGS, WRAPPING, CUSHIONING, ETC., CAPABLE OF PROTECTING THE CONTENTS

FROM DAMAGE AND/OR BREAKAGE.

UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL EXTERIOR (SHIPPING)

CONTAINERS (EXPORT WHEN NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND

SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT THE LOWEST RATE, TO POINT

OF DELIVERY CALLED FOR IN THE CONTRACT OR ORDER.

PALLETIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-147. UNITIZED LOADS

SHALL BE USED WHENEVER TOTAL QUANTITY FOR SHIPMENT TO ONE DESTINATION

EXCEEDS 250 LBS (EXCLUDING THE PALLET) OR 20 CU FT. LOADS SHALL BE

UNITIZED ON TYPE IV OR TYPE V 4-WAY ENTRY PALLETS. PALLET SHALL HAVE A

LENGTH OF 40 INCHES AND A WIDTH OF 48 INCHES. PALLET LOAD, INCLUDING

THE PALLET, SHALL NOT EXCEED 54 INCHES IN HEIGHT, 43 INCHES IN LENGTH

AND 52 INCHES IN WIDTH.

QUANTITY FOR SHIPMENT TO ONE DESTINATION OF LESS THAN 250 LBS OR 20

CUBIC FEET NEED NOT BE PALLETIZED.

IF A PROPERLY PALLETIZED LOAD OF A SINGLE ITEM (EQUIPMENT ITEM AND

PALLET) EXCEEDS 54 INCHES IN HEIGHT, HEIGHT LIMITATION NEED NOT BE

ADHERED TO.

IF A SINGLE ITEM EXCEEDS THE MAXIMUM PALLET LOAD DIMENSIONS, LENGTH AND

WIDTH NEED NOT BE ADHERED TO. CONTACT THE CONTRACTING OFFICER FOR

ADDITIONAL GUIDANCE.

AS AN ALTERNATE, COMMERCIAL UNITIZATION MAY BE SUPPLIED.

IN ADDITION TO ALL MARKING REQUIREMENTS SPECIFIED HEREIN AND IN THE

APPLICABLE SPECIFICATION DOCUMENT, ALL SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS SHALL ALSO REQUIRE PASSIVE RFID TAGS IN ACCORDANCE WITH DFARS

CLAUSE 252.211-7006. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO

NSNS IN FSCS 6505/6508/6509/6550.

LABELING AND MARKING. MATERIAL SHALL BE LABELED AND MARKED IN

ACCORDANCE WITH COMMERCIAL PRACTICE AND AS SPECIFIED HEREIN.

MARKING ON EACH UNIT SHALL INCLUDE THE NSN AND GOVERNMENT QUANTITY AND

UNIT OF ISSUE. HOWEVER, EXCEPTIONS ARE CURRENTLY APPLICABLE TO NSNS IN

FSCs 6505 and 6509.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 41 PAGES

MARKING ON EACH SHIPPING CONTAINER AND/OR UNITIZED LOAD SHALL BE AS

SPECIFIED IN MEDICAL MARKING STANDARD NO. 1B ((MMS NO. 1B) DATED 30

MARCH 2017.

ADDITIONAL MARKINGS SHALL BE SUPPLIED IN ACCORDANCE WITH ALL APPLICABLE

REGULATORY REQUIREMENTS, FOR ALL ITEMS REQUIRING SPECIAL HANDLING, I.E.,

CONTROLLED, PERISHABLE AND HAZARDOUS ITEMS.

APPLICABLE TO ALL SHIPMENTS, EXCEPT SHIPMENTS TO DLA DISTRIBUTION

LOCATIONS: AS AN ALTERNATE, FOR SHIPMENTS DIRECTLY TO MEDICAL FACILITIES

OF ALL ITEMS EXCEPT PERISHABLE ITEMS AND HAZARDOUS MATERIAL, REQUIRED

MARKINGS MAY BE SUPPLIED ON THE DD FORM 250 OR PACKING LIST ACCOMPANYING

THE SHIPMENT.

MIL-STD-147 IS AVAILABLE ONLINE AT…