PORTABLEALTAR_with_4_hangings.pdf

ALTAR, PORTABLE, COMPLETE ENSEMBLE INCLUDES ALTAR, PORTABLE WITH CARRIER; ALTAR FAIR

LINEN; ALTAR SEASONAL HANGINGS SET, 4 EACH (RED, PURPLE, GREEN, WHITE)

PORTABLE ALTAR SHALL BE MADE OF ANODIZED ALUMINUM; TOP HAS A SATIN-LIKE FINISH; WELDED CORNERS; TOP OF ALTAR WHEN IN THE UNFOLDED POSITION IS 28 INCHES W X 60 INCHES L X .100 INCH H; SHALL FOLD IN HALF WITH EXTENDABLE FOLDING LEGS; LEGS ARE 28 INCHES LONG WHEN NOT EXTENDED, 39 INCHES LONG WHEN FULLY EXTENDED; LEGS SHALL EXTEND TO 30 AND 40 INCHES; SHALL HAVE HOOK OR LOOP TAPE ACROSS THE BACK EDGE OF ALTAR AND ON EACH LEG APPROX 2 INCHES FROM THE BOTTOM TO COINCIDE WITH THE HOOK OR LOOP TAPE ON SEASONAL

HANGINGS AND FAIR LINEN.

CARRIER CASE SHALL BE 1000 DENIER CORDURA WATERPROOF MATERIAL WITH A HEAVY DUTY SLIDE FASTENER THAT OPENS ON THREE SIDES OF THE ALTAR WHEN FOLDED; CARRIER CASE SHALL HAVE

THE ABILITY TO CARRY PORTABLE ALTAR, PORTABLE ALTAR FAIR LINEN, PORTABLE ALTAR

SEASONAL HANGINGS AND PORTABLE ALTAR ELEMENTS COVER; EXTERNAL SIZE IS 29 INCHES TOP X 31 INCHES SIDES X 4-1/2 INCHES THICK; CASE WILL HAVE A REINFORCED ADJUSTABLE SHOULDER

STRAP AND TWO CARRYING HANDLES; REINFORCED CORNERS.

PORTABLE ALTAR FAIR LINEN; SHALL BE MADE FROM EASYCARE, WASHABLE COTTON OR POLY/COTTON BLEND; COLOR WHITE; SHALL COVER THE TOP, LEFT AND RIGHT SIDES OF THE ALTAR TO WITHIN 1 INCH OF THE GROUND ON EACH SIDE; APPROXIMATE DIMENSIONS 28 INCHES W X 140 INCHES L;

FAIR LINEN SHALL NOT OVERHANG IN FRONT OR REAR OF THE ALTAR AND SHALL BE HEMMED ON ALL

SIDES; FAIR LINEN SHALL ATTACH TO FRONT LEGS WITH HOOK AND LOOP TAPE FASTENERS 2

INCHES FROM THE BOTTOM TO PREVENT MOVEMENT.

PORTABLE ALTAR SEASONAL HANGINGS; SHALL BE MADE FROM EASYCARE, WASHABLE COTTON OR POLY/COTTON BLEND; ONE EACH OF RED, GREEN PURPLE, AND WHITE LINENS; SHALL COVER THE TOP AND OVERHANG THE FRONT OF THE ALTAR TO WITHIN 1 INCH OF THE GROUND; APPROXIMATE FINISHED DIMENSIONS 60 INCHES W X 75 INCHES L; HANGINGS SHALL NOT OVERHANG EITHER SIDE OF THE ALTAR AND SHALL BE HEMMED ON ALL SIDES; HANGINGS SHALL ATTACH TO FRONT LEGS

WITH HOOK AND LOOP TAPE FASTENERS 2 INCHES FROM THE BOTTOM TO PREVENT MOVEMENT.

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

- MILITARY MARKING FOR SHIPMENT AND STORAGE

DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL

BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS,

REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS

"PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

COMMERCIAL PACKAGING IAW ASTM-D-3951

MARKING IAW MIL-STD-129 & MIL-HDBK-129

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES"(IF QUANTITY OF ITEM

REQUIRES)

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS SHALL NOT EXCEED

43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES IN HEIGHT (INCLUDING THE

PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING MATERIALS. THE

USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS DISCOURAGED. PALLET LOADS

SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ONE NSN, TO THE

MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY.

SAID CARTON SHALL BE CLEARLY MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS (WPM) - (JULY 2006)