SPE1C119Q0057.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE1C1-19-Q-0057

2. DATE ISSUED

2018 NOV 19

3. REQUISITION/PURCHASE REQUEST NO.

0076803906

RATING

DO-C9

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: Robin Cooper DRC0010 Tel: DSN-444-3811 Email: robin.cooper@dla.mil

6. DELIVER BY (Date)

150 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 NOV 29

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 33 PAGES

SPE1C1-19-Q-0057

CONTINUED ON NEXT PAGE

“The Government will evaluate quotes utilizing a Best Value Tradeoff methodology considering the following evaluation factors: price, delivery, and past performance. This means that the Government may make an award to a vendor that submits other than the lowest evaluated price. For example, the Government may choose to pay a premium price to a vendor that has more favorable past performance. Past performance evaluation will utilize the Supplier Performance Risk System (SPRS) and will be evaluated in accordance with DFARS 252.213-7000.”

**The evaluation criteria stated in this paragraph supersede any inconsistent provisions contained elsewhere in the solicitation.

*Variation in quantity is +/- 0%

*FAR 52.248-01, Alt III Value Engineering is applicable to this award.

*Two (2) first articles are due 30 days after date of award.

Submit Samples to:

DLA Troop Support 700 Robbins Ave.

Philadelphia, PA 19111 Attn: Robin Cooper Bldg. 3 / WK Station 3B5111

Note: The government reserves the right to cancel the order if first article samples are not received 30 days after award or in the event of First Article Failure. Repeated First Article failure may result in termination for default.

** VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA.

VIM Helpdesk: VIMSUPPORT@dla.mil

**The Quality Standards of DPSCM 4155.3 apply to this acquisition.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 33 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: PGC: 15346

ITEM DESCRIPTION:

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 8345-01-149-8087 210.000 EA $ ________________ $ ________________

FLAG

,ORGANIZATIONAL

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 150 DAYS ADO

PREP FOR DELIVERY:

PARCEL POST ADDRESS:

UY8615

ARIZONA INDUSTRIES FOR THE BLIND

515 N 51ST AVENUE NUMBER 130 DOCK 1

PHOENIX AZ 85043

US

FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND

CONTRACT

FREIGHT SHIPPING ADDRESS:

UY8615

ARIZONA INDUSTRIES FOR THE BLIND

515 N 51ST AVENUE NUMBER 130 DOCK 1

PHOENIX AZ 85043

US

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0076803906 0001 N/A N/A N/A 07/19/2019

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 33 PAGES

CONTINUED ON NEXT PAGE

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING (JUL 2016) FAR

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

TECH. DATA

"FLAG, ORGANIZATIONAL, MILITARY INTELLIGENCE, "

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

"BLANK, TYPE I, CLASS 1, STYLE 11 "

"ORIENTAL BLUE, CABLE NO. 80176 "

"SCHIFFLI EMBROIDERED, RAYON BANNER "

"W/FRINGE, SILVER GRAY, CABLE NO. 67137 "

"HOIST 3 FT., FLY 4 FT., TYPE II HEADING "

"MINIMUM STITCH COUNT, EACH SIDE, CARTOON "

CARTOON 5-6-2-1 03/19/1982

CARTOON 5-6-2-2 03/19/1982

CARTOON 5-6-2-3 03/19/1982

CARTOON 5-6-2-4 03/19/1982

CARTOON 5-6-2-5 03/19/1982

ADDITIONAL INFORMATION FOR MIL-F-14648:

IN ACCORDANCE WITH MILITARY SPECIFICATION

MIL-F-14648

DELETE PARA. 3.3.1 FLAG BASE MATERIAL.

AND REPLACE WITH THE FOLLOWING:

"3.3.1 FLAG BASE MATERIAL. THE BASE MATERIAL

FOR TYPE I, TYPE II, AND TYPE III SHALL BE

RAYON BANNER CLOTH AS SPECIFIED IN 3.3.1.1."

DELETE PARA. 3.3.1.2 LIGHTWEIGHT NYLON BUNTING.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

PAGE 7, PARA. 3.4.1, AT THE END OF THE PARAGRAPH

ADD THE FOLLOWING NEW SENTENCE:

"WHEN SIZING, ADHESIVE OR A STIFFENING AGENT IS

USED ON THE COMPONENT PARTS OF TYPE I AND

TYPE II FLAGS, THERE SHALL BE AN APPROXIMATE

1/4 INCH STRIP VOID OF SIZING, ADHESIVE OR

STIFFENING AGENT ON THE EDGES OF THE COMPONENT

PARTS THAT MAKE UP THE SHIELD AREA WHEN

ASSEMBLED."

PAGE 8, PARA. 3.5.2.1 TYPE I, CLASS 1 FLAGS.

AT THE END OF THE FOURTH SENTENCE ADD THE

FOLLOWING NEW SENTENCE:

"STITCHING IS NOT REQUIRED ON THE EDGES OF THE

COMPONENT PARTS THAT MAKEUP THE SHIELD AREA."

PAGE 9, PARA: 3.5.2.6, LINE 1, DELETE "OR TWO",

LINE 10, DELETE FIFTH SENTENCE IN ITS ENTIRETY.

NOTE: ABOVE CHANGES TO REQUIRE RAYON BANNER

CLOTH AS PREFERRED BASIC FABRIC.

MIL-F-19579B(MC), DATED 24 OCTOBER 1972, HAS

BEEN CANCELLED, AND REPLACED BY MIL-F-14648A,

DATED 30 APRIL 1986.

ACCORDING TO MIL-F-14648A, PAGE 9, PARA. 3.5.2.6

TYPE III. THE UPPER SHADED AREA ON THE FOLD OF

THE BOTTOM SCROLL WILL BE HAND EMBROIDERED.

REPLACE PARAGRAPH 3.5.2.1 WITH THE FOLLOWING:

"3.5.2.1 TYPE I, CLASS 1 FLAGS. ALL TYPE I,

CLASS 1 FLAGS (BLANKS ONLY) SHALL BE FABRICATED

ON ONE THICKNESS OF BASE MATERIAL. COMPONENTS

SHALL BE CLOSELY TRIMMED AND APPLIQUED TO THE

BASE MATERIAL ON BOTH SIDES OF THE FLAG AND

SHALL APPEAR AS IF PRINTED THROUGH IN THE

LOCATION INDICATED ON DRAWINGS 5-6-1B AND 5-6-2.

THE APPLIQUE THREAD SPECIFIED IN 3.3.2 SHALL

MATCH THE EDGE COLOR OF THE COMPONENT BEING

APPLIQUED. COMPONENTS SHALL BE ALIGNED WITH THE

APPLIQUE STITCHING CATCHING THE OUTSIDE EDGE OF

THE EMBROIDERED COMPONENTS WITH NO STITCHING

SHOWING ON THE BASE MATERIAL OR WITHIN

EMBROIDERY AREAS OTHER THAN THE OUTSIDE EDGE.

FOR COMPLETION OF FLAGS SEE APPLICABLE DRAWING

OR PAINTING FOR UNIT DESIGNATION, COAT OF ARMS

OR CREST."

Section 3.4.1 Embroidered Components, after the last sentence add: The thickness of the embroidered components applied to the flag banner shall be thin enough to allow for the application of the additional embroidered components that will be added by the DLA Troop Support flag room.

BAR CODE LABEL/TAG FOR MIL-F-14648. EACH ITEM

SHALL BE INDIVIDALLY BAR CODED. THE BAR CODE

ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK

NUMBER (NSN). THE BAR CODE FOR NSN SHALL BE

A MEDIUM TO HIGH DENSITY, CLEARLY LEGIBLE AND

READABLE BY SCANNER, AND SHALL BE LOCATED SO

THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM

WHEN PACKAGED AS SPECIFIED. ATTACHMENT OF THE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

LABEL SHALL CAUSE NO DAMAGE TO THE ITEM. THE

LABEL SHALL BE POSITIONED INSIDE THE PLASTIC

BAG AND SHALL BE TYPE VII OF MIL-STD-32075.

BAR CODE DEFECTS:

-BAR CODE OMITTED OR NOT READABLE BY SCANNER-

MINOR.

-HUMAN READABLE INTERPRETATION (HRI) OMITTED-

MINOR.

-NOT VISIBLE ON FOLDED, PACKAGED ITEM-MINOR.

-CAUSE DAMAGE TO THE ITEM-MAJOR.

IT IS RECOMMENDED THAT TWO EACH FIRST ARTICLE SAMPLES OF THE END ITEM(S)

BE SUBMITTED TO THIS CENTER FOR VISUAL, DIMENSIONAL AND SHADE

EXAMINATIONS. THIRTY DAYS WILL BE REQUIRED TO EXAMINE AND EVALUATE THE

SAMPLES AND TO FURNISH THE RESULTS AND DIRECTIONS REGARDING PRODUCTION

TO THE CONTRACTOR.

DEVIATIONS TO REQUIREMENTS AS OUTLINED BY MIL-F-14648

FOR THIS ITEM: FLAG EMBROIDERY SHALL BE SEWN DIRECTLY

TO THE FLAG'S BASE WITHOUT THE USE OF BASE CLOTH OR

APPLIQUE TECHNIQUES. EMBROIDERED FLAG BLANK SHALL BE

THIN ENOUGH TO PERMIT ADDITIONAL EMBROIDERY BY THE

DEFENSE SUPPLY CENTER PHILADELPHIA'S FLAG ROOM.

ADDITIONAL INFORMATION FOR V-T-276:

V-T-276 HAS BEEN CANCELLED AND REPLACED BY

A-A-52094

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

(ref. T1481)

ADDITIONAL INFORMATION FOR CCC-C-430:

A-A-50145 HAS BEEN AUTHORIZED FOR USE IN

PREFERENCE TO CCC-C-430 FOR THE TYPE II CLOTH

ADDITIONAL INFORMATION FOR A-A-50145:

A-A-50145 CLOTH, SHEETING, COTTON,

. AND POLYESTER/COTTON, WHITE

INTERIM SPECIFICATION CHANGES TO A-A-50145:

PAGE 1, PARA. 1.1, LINE 11 AFTER "122 COUNT:ADD

"(UNDYED)"

PAGE 2, TABLE I, UNDER TYPE I AND TYPE II,

ACROSS FROM SHRINKAGE: DELETE "2.0" AND

SUBSTITUTE "3.0" IN ALL FOUR LOCATIONS.

PAGE 2, TABLE I, UNDER TYPE II, AFTER "122

COUNT": ADD "(UNDYED)"

PAGE 3, PARAGRAPH 3.1: DELETE AND SUBSTITUTE:

"3.1 CERTIFICATION. THE CONTRACTOR SHALL CERTIFY,

AND MAINTAIN SUBSTANTIATING EVIDENCE THAT

THE PRODUCT OFFERED MEETS THE SALIENT CHARACT-

ERISTICS AND REQUIREMENTS OF THIS COMMERCIAL

ITEM DESCRIPTION, AND THAT THE PRODUCT CONFORMS

TO THE PRODUCER'S OWN DRAWINGS, SPECIFICATIONS,

STANDARDS AND QUALITY ASSURANCE PRACTICES.

THE GOVERNMENT RESERVES THE RIGHT TO REQUIRE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

PROOF OF SUCH CONFORMANCE PRIOR TO FIRST

DELIVERY AND THEREAFTER AS MAY BE OTHERWISE

PROVIDED FOR UNDER THE PROVISIONS OF THE

CONTRACT.

3.2 VISUAL EXAMINATION. LOTS OF CLOTH SHALL BE

IN ACCORDANCE WITH MIL-STD-105. THE INSPECTION

LEVEL SHALL BE II. THE LOT SIZE SHALL BE

EXPRESSED IN UNITS OF YARDS. THE SAMPLE SIZE

SHALL BE ONE LINEAR YARD. THE CLOTH SHALL BE

EXAMINED ON THE FACE SIDE FOR THE FOLLOWING

DEFECTS: HOLE, TEAR, RUN OR DROPPED STITCH,

END OUT, MEND, THIN OR UNEVEN AREA, SLUB,

SLUG OR GOUT, PERMANENT CREASE IN CLOTH, SHADE

BAR, STREAK, SPOT OR STAIN, WEIGHT NOT AS

SPECIFIED.

3.3 LENGTH EXAMINATION. DURING THE YARD-BY-YARD

EXAMINATION, EACH ROLL IN THE SAMPLE SHALL BE

EXAMINED FOR LENGTH AND WEIGHT. ANY LENGTH FOUND

TO BE LESS THAN THE MINIMUM SPECIFIED OR MORE

THAN 2 YARDS LESS THAN THE LENGTH MARKED ON THE

ROLL TICKET SHALL BE CONSIDERED A LENGTH DEFECT.

IF THE TOTAL OF THE ACTUAL LENGTHS OF THE ROLLS

IS LESS THAN THE TOTAL OF THE LENGTHS MARKED ON

THE ROLL TICKETS, THE LOT SHALL BE REJECTED."

PAGE 4, PARA. 5.4: DELETE AND SUBSTITUTE THE

FOLLOWING: :5.4 SUPERSESSION DATA. THE TYPES

AND STYLES COVERED BY THIS COMMERCIAL ITEM

DESCRIPTION REPLACE (IN PART) ITEMS COVERED

BY CCC-C-430 AS INDICATED BELOW:

CID A-A-50145 CCC-C-430

TYPE I, 140 COUNT TYPE II, STYLE A

TYPE I, 128 COUNT TYPE II, STYLE B

TYPE II, 122 COUNT TYPE II, STYLE G

(UNDYED) (BLEACHED ONLY)

TYPE II, 177 COUNT TYPE II, STYLE D

. (BLEACHED ONLY)".

ADDITIONAL INFORMATION FOR KK-L-2004 WITH INTERIM CHANGES BELOW:

FEDERAL SPECIFICATION KK-L-2004, DATED 22 APRIL, 1989 IS HEREBY

CANCELED. THIS DOCUMENT HAS BEEN SUPERSEDED BY MIL-DTL-32092 LEATHER,

CATTLEHIDE, DEERSKIN AND HORSEHIDE, CHROME TANNED, Nov. 8, 2001.

(ref. T0731 - 5/23/06)

ADDITIONAL INFO FOR UU-P-268: UU-P-268 IS CANCELLED.

USE A-A-203C DATED 1/3/96 AND A-A-1894A DATED 5/27/93.

(ref. T0688 - 9/11/06)

ADDITIONAL INFO FOR A-A-1894: NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T7316 - 9/11/06)

ADDITIONAL INFORMATION FOR A-A-203:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR UU-P-553:

FEDERAL SPECIFICATION UU-P-553C IS HEREBY

CANCELLED AND REPLACED WITH A-A-1249A,

PAPER, WRAPPING, TISSUE, DATED MAY 18, 1993.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

ADDITIONAL INFORMATION FOR A-A-1249:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM

FEDERAL SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY

CANCELLED, AND REPLACED WITH ASTM-D-5118, STANDARD PRACTICE FOR

FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD

PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD

SHIPPING CONTAINERS.

ADDITIONAL INFORMATION FOR MIL-C-606:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR ML-F-2310:

NO ADDITIONAL INFORMATION FOLLOWS.

ADDITIONAL INFORMATION FOR MIL-F-2692:

CHANGE DATE 06/01/2015:

ACRYLIC BUNTING ONLY:

DO TO THE NON-AVAILABLITY OF ACRYLIC BUNTING YARN IN

THE UNITED STATES, A CERTICATE OF COMPLIANCE (COC) IS

REQUIRED WHEN SUBMITTING FIRST ARTICLE SAMPLES. THE

COC IS REQUIRED TO DETERMINE THAT THE MATERIAL IS IN

ACCORDANCE WITH THE BUY AMERICAN PROGRAM (252.225-7001).

IT SHALL INCLUDE WHAT COUNTRY THE ACRYLIC BUNTING YARNS

ARE DELIVERIED. A LIST OF THE QUALIFYING COUNTRIES ARE

AVAILABLE IN 252.225-7001.

THIS IS ONLY VALVED ON CONTRACTS WHERE THE DOLLAR VALUE

IS $150K OR LESS.

CHANGE DATE 4/15/2010 BY IOH:

PAGE 5, PARA. 3.3.1.4 NYLON-WOOL BUNTING. ADD

THE FOLLOWING AFTER THE LAST SENTENCE:

"AS AN ADDITIONAL ALTERNATIVE, A 100 PERCENT NYLON

FABRIC MAY BE USED. THE NYLON FABRIC SHALL BE

OF 200 DENIER AND CONFORM TO TYPE I, CLASS A OR

B OF CCC-C-476."

PAGE 5, PARA 3.3.1.5 RAYON. CHANGE PARAGRAPH TO READ

"THE RAYON BANNER CLOTH SHALL BE 50 DENIER 2 PLY

CONFORMING TO MIL-C-606. AS AN ALTERNATIVE, A

RAYON FABRIC WITH THE WARP USING 60 DENIER 2 PLY

(PLUS OR MINUS 5) AND A 100 DENIER SINGLE PLY OR

50 DENIER 2 PLY FILLING MAY BE USED. THE NUMBER

OF ENDS IN THE WARP SHALL BE 230 (PLUS OR MINUS

10). OTHER PHYSICAL AND TEST REQUIREMENTS

SPECIFIED IN MIL-C-606 SHALL APPLY."

PAGE 7, PARA. 3.3.10 FRINGE. ADD THE FOLLOWING

AFTER THE LAST SENTENCE:

"RAYON/ACETATE MAY BE SUBSTITUTED FOR

CUPRAMMONIUM RAYON. WHEN USED, THE RAYON/ACETATE

YARN USED FOR THE HEADING AND BULLION SHALL BE A

575 15 DENIER ACETATE, CONTINUOUS

MULTIFILAMENT BRIGHT VISCOSE RAYON. ALL OTHER

REQUIREMENTS OF MIL-F-2310 APPLY EXCEPT THE

HEADING OF THE FINISHED FRINGE SHALL HAVE A

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

MINIMUM OF 8 ENDS FOR CLASS 1 OR 12 ENDS FOR

CLASS 2 IN THE FLOAT STRIPE AND A MINIMUM OF

9 ENDS FOR CLASS 1 OR 14 ENDS FOR CLASS 2 IN

EACH BORDER."

PAGE 8, PARA. 3.4.1, COMPONENTS OF DESIGN,

SUBPARAGRAPH (D) SCREEN PRINTING., DELETE IN

ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING

PARAGRAPH:

"(D) SCREEN PRINTING. SCREEN PRINTED COMPONENTS

OF THE DESIGN SHALL BE PRINTED IN THE LOCATION

SHOWN ON THE APPLICABLE DRAWING USING SCREENS

MADE BY THE PHOTOGRAPHIC METHOD. COMPONENTS OF

THE DESIGN SHALL BE CLEARLY DISTINGUISHABLE,

SYMMETRICAL AND APPEAR PROPER ON EACH SIDE OF

THE FLAG. EXCEPTION: WHEN A PENETRATING DYE

IS USED, COMPONENTS OF THE DESIGN SHALL APPEAR

PROPER ON THE FACE SIDE OF THE FLAG, BE CLEARLY

DISTINGUISHABLE, SYMMETRICAL AND SHOW IDENTICAL

ON THE OPPOSITE SIDE OF THE FLAG AS IF PRINTED

THROUGH THE MATERIAL. ACRYLIC FLAGS SHALL NOT

BE SCREEN PRINTED."

PAGE 9, PARAGRAPH 3.5.1, BASIC CONSTRUCTION.

CHANGE THE FIRST SENTENCE TO READ," UNLESS

OTHERWISE SPECIFIED AND EXCEPT FOR RAYON FLAGS,

ALL FLAGS SHALL HAVE THE WARP OF THE BASIC

MATERIAL RUNNING IN THE FLAG, OR HORIZONTAL,

DIRECTION OF THE FLAG.".

PAGE 16, PARA 3.8.1, - BAR CODE LABEL/TAG FOR

MIL-F-2692. EACH ITEM SHALL BE INDIVIDUALLY BAR

CODED. THE BAR CODEELEMENT SHALL BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THE BAR CODE FOR NSN

SHALL BE A MEDIUM TO HIGH DENSITY, CLEARLY LEGIBLE

AND READABLE BY SCANNER, AND SHALL BE LOCATED SO

THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM

WHEN PACKAGED AS SPECIFIED. ATTACHMENT OF THE

LABEL SHALL CAUSE NO DAMAGE TO THE ITEM. THE

LABEL SHALL BE POSITIONED INSIDE THE PLASTIC

BAG AND SHALL BE TYPE VII OF MIL-STD-32075.

BAR CODE DEFECTS:

-BAR CODE OMITTED OR NOT READABLE BY SCANNER-

MINOR.

-HUMAN READABLE INTERPRETATION (HRI) OMITTED-

MINOR.

_NOT VISIBLE ON FOLDED, PACKAGED ITEM-MINOR.

_CAUSE DAMAGE TO THE ITEM-MAJOR.

PAGE 24, PARA. 4.5.4.1.3, LINE 5, DELETE

"4.5.4.1.1 I 4.0 10.0 AND SUBSTITUTE

"4.5.4.1.1 I 2.5 6.5.

LINE 6, DELETE "4.5.4.1.2 S-3 6.5 15.0"

AND SUBSTITUTE "4.5.4.1.2 S-3 4.0 10.0."

PAGE 25, PARA 5.1.1.1.1, AT THE END OF THE

SENTENCE ADD: "THERE SHALL BE A WHITE PAPER

LABEL INSERTED INTO EACH BAG WITH THE FOLLOWING

INFORMATION: ITEM DESCRIPTION, CONTRACT NUMBER,

NATIONAL STOCK NUMBER (NSN), SIZE, CONTRACTOR'S

NAME. THE LETTERING SHALL BE A MINIMUM OF 18

POINTS (APPROXIMATELY 1/4 INCH).".

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

PAGE 26, PARA 5.3, DELETE SECOND SENTENCE AND

SUBSTITUTE: "EACH PREPARED LOAD SHALL BE BONDED

WITH PRIMARY AND SECONDARY STRAPS IN ACCORDANCE

WITH BONDING MEANS C, AND D OR FILM BONDING

METHOD F OR G."

NOTE; DWG 5-1-45G, TYPE I, CLASS THREE (3) HEADINGS,

THE PLACEMENT OF THE DISTANCE LINE WITH

THIMBLE AT THE TOP OF THE HEADING SHALL BE DRAWN

INTO THE HEADING UNTIL THIMBLE IS APPROXIMATELY

FLUSH WITH THE OUTER EDGE OF THE HEADING. (AS

PER PARAGRAPH 3.5.2.1.1-C). THE DISTANCE LINE

WITH THIMBLE AT THE LOWER END OF THE

HEADING SHALL BE 9 INCHES FOR SIGNAL FLAGS AND

PENNANTS AND 24 INCHES FOR ALL OTHERS. (AS PER

PARAGRAPH 3.5.2.1.1-D).

NOTE: AIR FORCE DRAWINGS 5-1-4, 5-1-105, AND

5-1-189 ARE CHANGED TO INCLUDE THE FOLLOWING:

5-1-4: UNDER MATERIAL, GUIDON BASE DELETE

"NYLON-WOOL BUNTING OR NYLON" AND SUBSTITUTE

"HEAVYWEIGHT NYLON (TYPE I, CLASS B OF

CCC-C-476)".

"5-1-105, UNDER NOTES, LINES 2, 3, AND 6

DELETE THE FOLLOWING; "80068", "80166" AND

"80166" AND SUBSTITUTE "67103", "67194" AND

"67194".

"5-1-189 UNDER NOTES,

LINES 2 AND 3 DELETE "70068" AND "70118" AND

SUBSTITUTE "67103" AND "67194".

NOTE: DWG. 5-1-105, LINE 4, AFTER "WIDTH" ADD

THE FOLLOWING: "OR SCREEN PRINTED ON NYLON

GUIDON BASE UTILIZING PENETRATING DYES".

TIOH DRAWING 5-1-146, DTD 8 NOV 96, HAS BEEN

CANCELED AND REPLACED BY 5-1-145, DTD 7 MAR 2001.

"BOAT FLAG" ADDED WITH OUTDOOR USE.

NOTE: ON DRAWING 5-1-189, WHEN NINE (9) OR MORE

LETTERS AND/OR NUMERALS ARE ON ONE LINE, THE

SIZE OF THE LETTERS AND/OR NUMERALS SHALL BE

REDUCED TO 1 3/4 INCHES IN HEIGHT.".

CHANGE TO TIOH DRAWING 5-1-514, DTD 23 JUN 89;

DELETE "NYLON WOOL BUNTING", AND SUBSTITUTE

"HEAVYWEIGHT NYLON" (TYPE I, CLASS B OF

CCC-C-476).

CHANGES TO TIOH DRAWING 5-9-1A, DTD 19 JULY 95

ARE AS FOLLOWS:

NOTE 2, AT THE END OF THE SENTENCE AFTER "SIDES"

ADD, "WITH THE RIFLE ON THE DEVICE POINTING TO

THE LEFT ON THE FRONT AND BACK OF THE FLAG".

NOTE 3, DELETE ENTIRE SENTENCE AND SUBSTITUTE,

"DEVICE TO BE APPLIQUE AND EMBROIDERY."

ADDITIONAL INTERIM CHANGES TO DRAWING 5-NAV-1

THESE CHANGES APPLY TO DRAWING 5-NAV-1.

UNDER NOTES, FOR NOTE 4, DELETE & SUBSTITUTE "4.

SEAL & SCROLL SHALL BE APPLIED TO THE BASE

FLAG CLOTH BY APPLIQUÉ, HAND EMBROIDERY OR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

MACHINE EMBROIDERY OR A COMBINATION OF THESE

PROCESSES. WHEN SEAL & SCROLL ARE APPLIQUED TO

THE FLAG, YELLOW EMBROIDERY YARN (AF YELLOW,

CABLE NO. 67103) SHALL BE USED."

FOR NOTE 5, DELETE IN ITS ENTIRETY.

ADD NEW NOTE: "THE PENNANT FLAG SHALL HAVE

SEVEN (7) WHITE EMBROIDERED STARS. SEE DE-

TAIL 1A ON SUPPLEMENTAL SHEET. THE UNITED

STATES FLAG SHALL HAVE THIRTEEN (13) WHITE

EMBROIDERED STARS. SEE DETAIL 2A. THE

REMAINING BLUE (3) PENNANT FLAG SHALL HAVE

THIRTEEN (13) WHITE EMBROIDERED STARS IN

A CIRCLE, AND ONE LARGER WHITE EMBROIDERED

STAR IN ITS CENTER. SEE DETAIL 3A.

UNDER MATERIALS FOR FLAG BASE, DELETE AND

SUBSTITUTE: "HEAVYWEIGHT NYLON CONFORMING TO A-A-

59709, TYPE I, CLASS B". FOR "SEAL" DELETE &

SUBSTITUTE:" HEAVYWEIGHT NYLON CONFORMING TO

A-A-59709,TYPE I, CLASS B FOR APPLIQUE CLOTH &

RAYON OR POLYESTER YARN FOR EMBROIDERY".

UNDER "COLORS AND CABLE NUMBERS OF COLORS"

DELETE COLUMN OF "PMS" COLORS IN ITS ENTIRETY.

UNDER "SEAL" THE COLORS AND CABLE NUMBERS

DELETE:

"BROWN (2) - AFRICAN BROWN - 80180

BROWN (3) - COCOA - 80092

BROWN (4) - BROWN - 65016" AND SUBSTITUTE:

"BROWN (2) - SPICE BROWN - 80129

BROWN (3) - AFRICAN BROWN - 80180

BROWN (4) - COCOA - 80092".

SUPPLEMENT TO 5-NAV-1 DRAWING IS IN GATEWAY.

THE FOLLOWING INFO: IS FOR DWG. 7556605:

SHEET 1 OF 2, UNDER GENERAL NOTES, NOTE 8,

ITEM 2, PART FOR "STRIPES SIX" DELETE THE

CABLE NUMBER "80002" FOR THE WHITE COLOR AND

SUBSTITUTE "80001".

UNDER "GENERAL NOTES" FOR NOTE #4 DELETE AND

SUBSTITUTE AND ITS ENTIRETY TO DRAWING 7556605.

"4. THE HEADING SHALL BE IAW TYPE I, CLASS 1 OF

MIL-F-2692 WITH A 24 INCH HALYARD CONFORMING

TO MIL-R-17343. THE SNAPHOOKS SHALL BE IAW

MIL-H-15021. THE DESIGN ELEMENTS OF THIS FLAG

SHALL BE IAW THE FOLLOWING:".

UNDER NOTE #5E AND 5F DELETE IN THEIR ENTIRETY

AND SUBSTITUTE:

"E. IDENTIFICATION AND CARE INSTRUCTION LABEL

REQUIREMENTS: THE FLAG SHALL HAVE TWO LABELS;

ONE IDENTIFICATION LABEL AND ONE CARE INSTRUCT-

ION LABEL. EACH LABEL SHALL CONFORM TO TYPE IV,

CLASS 9 OF MIL-DTL-32075. EACH LABEL SHALL RUN

ANYWHERE ALONG THE LENGTH OF THE HEADING AND

APPEAR ON THE REVERSE SIDE OF THE FLAG. THE

LABELS SHALL BE PLACED A MINIMUM OF 2 INCHES

FROM THE TOP OF THE HEADER AND NOT EXTEND

BEYOND 2 INCHES FROM THE BOTTOM EDGE. THE

LETTERING IN EACH LABEL SHALL BE APPROPRIATE

TO THE SIZE OF THE HEADING BUT NOT MORE THAN

3/4 INCH HIGH.

(1) IDENTIFICATION LABEL: THE ARRANGEMENT OR

FORMAT OF THE INFORMATION IN THE LABEL SHALL BE

LEFT UP TO THE MANUFACTURER. THE LABEL SHALL

CONTAIN THE FOLLOWING INFORMATION:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

NOMENCLATURE:

CONTRACTOR'S NAME:

CONTRACT NUMBER:

NSN:

SIZE:

FIBER CONTENT: (FLAG AND HEADER)

(2) CARE INSTRUCTION LABEL: THE CARE INSTRUCTION

LABEL SHALL STATE THE FOLLOWING: DO NOT

COMPLETELY SUBMERSE THE FLAG IN SOAPY WATER. TO

REMOVE DIRT, SPOTS, STAINS, ETC., HAND WASH IN

COLD WATER WITH A MILD DETERGENT OR DRY CLEAN."

UNDER NOTE #8, ITEM 3. FOR THE "RATTLES (13)"

DELETE "BRONZE W/BLACK OUTLINE UPPERMOST &

DETAILS";"80111/65018" AND SUBSTITUTE "GOLD

W/BLACK OUTLINE UPPERMOST & DETAILS"; "80110/

65018". THE CABLE NUMBER CHANGE FOR NOTE 8, ITEM 2,

PART FOR "STRIPES SIX" IS RESCINDED. WITHDRAWAL

THE CABLE NUMBER OF THE WHITE STRIPES

REVERTS BACK TO THE ORIGINAL CABLE NUMBER OF

"80002" CITED ON DRAWING 7556605, SHEET 1 OF 2.

CHANGE TO TIOH DRAWING 5-NAV-11 DTD 12 APRIL 95:

MATERIALS: INDOOR FLAGS, FLAG BASE, DELETE

"RAYON BANNER CLOTH" AND SUBSTITUTE "HEAVYWEIGHT

NYLON"; DEVICE, DELETE "RAYON" AND SUBSTITUTE

"HEAVYWEIGHT NYLON".

TIOH DRAWING NO. 6-3-29 REV. 1, CZECHOSLOVAK

SOCIALIST REPUBLIC, DTD 22 APRIL 70 WAS

CANCELLED 30 JUNE 1997.

NOTE: THE "CZECHOSLOVAK SOCIALIST REPUBLIC" NO

LONGER EXISTS. IT IS CALLED "CZECH REPUBLIC".

THE FLAG DESIGN DID NOT CHANGE.

TIOH DRAWING 6-3-54, AFGHANISTAN, KINGDOM OF,

DTD 20 FEB 1967, WAS CANCELLED 27 APRIL 1976.

TIOH DRAWING NO. 6-3-74, SAUDI ARABIA, DTD

22 APRIL 70, WAS CANCELLED 30 JUNE 1997.

DWG 6-3-85, LAOS, KINGDOM OF, DTD 20 FEB 67, IS

OBSOLETE. DO NOT USE. CURRENT FLAG HAS DIFFERENT

DESIGN.

CHANGE TO TIOH DRAWING 6-3-176, DTD 24 AUG 79:

FLAG USED BY NAVY, UNDER "MATERIAL, FLAG BASE",

DELETE "COTTON BUNTING", AND SUBSTITUTE

"HEAVYWEIGHT NYLON BUNTING".

BUSHIP DRAWING 16696, SHEET 9D, DTD 28 SEPT 76

HAS BEEN REPLACED BY TIOH DRAWING 5-NAV-102,

DTD 8 JULY 85.

NOTE: FOREIGN FLAGS - WHEN "NYLON/WOOL BUNTING"

IS LISTED AS THE REQUIRED MATERIAL ON FOREIGN

FLAG DRAWINGS, CHANGE THE REQUIREMENT TO

"HEAVYWEIGHT NYLON".

BUSHIP DRAWING 16696, SHEET 162A, DTD 2 SEPT 55

HAS BEEN REPLACED BY TIOH DRAWING 5-NAV-11 AND

5-NAV-11A, DTD 12 APRIL 95.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

DEVIATIONS TO BUSHIP DRAWING 16696,

SHEET 197, REV E, READS AS FOLLOW:

LIST OF MATERIALS, DELETE "COTTON BUNTING

TYPE - B, CCC-B-791" AND SUBSTITUTE

"LIGHTWEIGHT NYLON CCC-C-476.

DEVIATION TO DRAWING NAVSEA D80064-1723701:

AN ALTERNATE FABRIC WHICH IS REFERENCED ON

DRAWING 6375284-1&2 PENNANT FABRIC, VINYL COATED

S AVAILABLE FROM THE JOHN BOYLE & CO., INC.

847 BETHEL AVE., PENNSAUKEN, NJ 08110. THE

PART NUMBER IS ROCKET RED #3 (-1), SATURN YELLOW

#17 (-2).

BUSHIP DRAWING 16696, SHEET 206C DTD 2 JULY 59,

HAS BEEN REPLACED BY TIOH DRAWING 5-NAV-1,

DTD 10 MAY 95.

ADDITIONAL INFORMATION FOR DD 22571 5-NAV-1:

"UNDER COLOR AND CABLE NUMBER OF COLORS DELETE

"AIR FORCE YELLOW - 67108", AND SUBSTITUTE

"AIR FORCE YELLOW - 67103", DELETE

"BROWN (2) - AFRICAN BROWN, 80180", "BROWN (3)

COCOA, 80092" AND "BROWN (4) - BROWN, 65016" AND

SUBSTITUTE "BROWN (2) - SPICE BROWN, 80129",

BROWN (3) - AFRICAN BROWN, 80180" AND

BROWN (4) - COCOA, 80092" RESPECTIVELY.

UNDER NOTES, FOR NOTE 4, DELETE & SUBSTITUTE "4.

SEAL & SCROLL SHALL BE APPLIED TO THE BASE

FLAG CLOTH BY APPLIQUE,HAND EMBROIDERY OR

MACHINE EMBROIDERY OR A COMBINATION OF THESE

PROCESSES.WHEN SEAL & SCROLL ARE APPLIQUED TO

THE FLAG, YELLOW EMBROIDERY YARN (AF YELLOW,

CABLE NO. 67103) SHALL BE USED."

FOR NOTE 5, DELETE IN ITS ENTIRETY.

ADD NEW NOTE: "THE PENNANT FLAG SHALL HAVE

SEVEN (7) WHITE EMBROIDERED STARS. SEE DE-

TAIL 1A ON SUPPLEMENTAL SHEET. THE UNITED

STATES FLAG SHALL HAVE THIRTEEN (13) WHITE

EMBROIDERED STARS. SEE DETAIL 2A. THE RE-

MAINING BLUE (3) PENNANT FLAG SHALL HAVE

THIRTEEN (13) WHITE EMBROIDERED STARS IN

A CIRCLE, AND ONE LARGER WHITE EMBROIDERED

STAR IN ITS CENTER. SEE DETAIL 3A.

UNDER MATERIALS FOR FLAG BASE, DELETE & SUB-

STITUTE: "HEAVYWEIGHT NYLON CONFORMING TO A-A-

59709, TYPE I, CLASS B". FOR "SEAL" DELETE &

SUBSTITUTE:"HEAVYWEIGHT NYLON CONFORMING TO

A-A-59709,TYPE I, CLASS B FOR APPLIQUE CLOTH &

RAYON OR POLYESTER YARN FOR EMBROIDERY".

UNDER "COLORS AND CABLE NUMBERS OF COLORS"

DELETE COLUMN OF "PMS" COLORS IN ITS ENTIRETY.

UNDER "SEAL" THE COLORS AND CABLE NUMBERS

DELETE:

"BROWN (2) - AFRICAN BROWN - 80180

BROWN (3) - COCOA - 80092

BROWN (4) - BROWN - 65016" AND SUBSTITUTE:

"BROWN (2) - SPICE BROWN - 80129

BROWN (3) - AFRICAN BROWN - 80180

BROWN (4) - COCOA - 80092".

SUPPLEMENT TO 5-NAV-1 DRAWING IS IN GATEWAY.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

THE FOLLOWING INFO: IS FOR DWG. 7556605:

SHEET 1 OF 2, UNDER GENERAL NOTES, NOTE 8,

ITEM 2, PART FOR "STRIPES SIX" DELETE THE

CABLE NUMBER "80002" FOR THE WHITE COLOR AND

SUBSTITUTE "80001".

UNDER "GENERAL NOTES" FOR NOTE #4 DELETE AND

SUBSTITUTE AND ITS ENTIRETY TO DRAWING 7556605.

"4. THE HEADING SHALL BE IAW TYPE I, CLASS 1 OF

MIL-F-2692 WITH A 24 INCH HALYARD CONFORMING

TO MIL-R-17343. THE SNAPHOOKS SHALL BE IAW

MIL-H-15021. THE DESIGN ELEMENTS OF THIS FLAG

SHALL BE IAW THE FOLLOWING:".

UNDER NOTE #5E AND 5F DELETE IN THEIR ENTIRETY

AND SUBSTITUTE:

"E. IDENTIFICATION AND CARE INSTRUCTION LABEL

REQUIREMENTS: THE FLAG SHALL HAVE TWO LABELS;

ONE IDENTIFICATION LABEL AND ONE CARE INSTRUCT-

ION LABEL. EACH LABEL SHALL CONFORM TO TYPE IV,

CLASS 9 OF MIL-DTL-32075. EACH LABEL SHALL RUN

ANYWHERE ALONG THE LENGTH OF THE HEADING AND

APPEAR ON THE REVERSE SIDE OF THE FLAG. THE

LABELS SHALL BE PLACED A MINIMUM OF 2 INCHES

FROM THE TOP OF THE HEADER AND NOT EXTEND

BEYOND 2 INCHES FROM THE BOTTOM EDGE. THE

LETTERING IN EACH LABEL SHALL BE APPROPRIATE

TO THE SIZE OF THE HEADING BUT NOT MORE THAN

3/4 INCH HIGH.

(1) IDENTIFICATION LABEL: THE ARRANGEMENT OR

FORMAT OF THE INFORMATION IN THE LABEL SHALL BE

LEFT UP TO THE MANUFACTURER. THE LABEL SHALL

CONTAIN THE FOLLOWING INFORMATION:

NOMENCLATURE:

CONTRACTOR'S NAME:

CONTRACT NUMBER:

NSN:

SIZE:

FIBER CONTENT: (FLAG AND HEADER)

(2) CARE INSTRUCTION LABEL: THE CARE INSTRUCTION

LABEL SHALL STATE THE FOLLOWING: DO NOT COM-

PLETELY SUBMERSE THE FLAG IN SOAPY WATER. TO RE-

MOVE DIRT, SPOTS, STAINS, ETC., HAND WASH IN

COLD WATER WITH A MILD DETERGENT OR DRY CLEAN."

UNDER NOTE #8, ITEM 3. FOR THE "RATTLES (13)"

DELETE "BRONZE W/BLACK OUTLINE UPPERMOST &

DETAILS";"80111/65018" AND SUBSTITUTE "GOLD

W/BLACK OUTLINE UPPERMOST & DETAILS"; "80110/

65018".

THE CABLE NUMBER CHANGE FOR NOTE 8, ITEM 2,

PART FOR "STRIPES SIX" IS RESCINDED. WITH-

DRAWAL THE CABLE NUMBER OF THE WHITE STRIPES

REVERTS BACK TO THE ORIGINAL CABLE NUMBER OF

"80002" CITED ON DRAWING 7556605, SHEET 1 OF 2.

BAR CODE LABEL/TAG FOR MIL-F-2692. EACH ITEM

SHALL BE INDIVIDUALLY BAR CODED. THE BAR CODE

ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK

NUMBER (NSN). THE BAR CODE FOR NSN SHALL BE

A MEDIUM TO HIGH DENSITY, CLEARLY LEGIBLE AND

READABLE BY SCANNER, AND SHALL BE LOCATED SO

THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM

WHEN PACKAGED AS SPECIFIED. ATTACHMENT OF THE

LABEL SHALL CAUSE NO DAMAGE TO THE ITEM. THE

LABEL SHALL BE POSITIONED INSIDE THE PLASTIC

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

BAG AND SHALL BE TYPE VII OF MIL-STD-32075.

BAR CODE DEFECTS:

-BAR CODE OMITTED OR NOT READABLE BY SCANNER-

MINOR.

-HUMAN READABLE INTERPRETATION (HRI) OMITTED-

MINOR.

-NOT VISIBLE ON FOLDED, PACKAGED ITEM-MINOR.

-CAUSE DAMAGE TO THE ITEM-MAJOR.

PAGE 25, PARAGRAPH 5.1.1.1.1, AT THE END OF THE

SENTENCE ADD: "THERE SHALL BE A WHITE PAPER

LABEL INSERTED INTO EACH BAG WITH THE FOLLOWING

INFORMATION: ITEM DESCRIPTION, CONTRACT NUMBER,

NATIONAL STOCK NUMBER (NSN), SIZE, CONTRACTOR'S

NAME. THE LETTERING SHALL BE A MINIMUM OF 18

POINTS (APPROXIMATELY 1/4 INCH).".

ADDITIONAL INFORMATION FOR MIL-I-14653:

WITH THE FOLLOWING INTERIM CHANGES TO MIL-I-14653:

AT THE END OF PARA. 3.5.2, ADD THE FOLLOWING:

"WHEN A SIZING OR STIFFENING AGENT IS USED ON

THE COMPONENT PARTS OF TYPE I, CLASS 1 FLAGS,

THERE SHALL BE AN APPROXIMATE 1/4 INCH STRIP

VOID OF SIZING OR STIFFENING AGENTS ON THE EDGES

OF THE COMPONENT PARTS THAT MAKE UP THE SHIELD

AREA WHEN ASSEMBLED."

"MIL-DTL-32075: LABEL FOR CLOTHING, EQUIPAGE,

AND TENTAGE, GENERAL USE REPLACES DDD-L-20

(Ref. T0451 - June 19, 2007)

INTERIM SPECIFICATION CHANGES TO MIL-DTL-32075:

PAGE 6, TABLE I, "PHYSICAL REQUIREMENTS OF THE

TYPE VI FINISHED LABEL." UNDER "TEARING

STRENGTH" DELETE: "(LB.) MINIMUM" AND

SUBSTITUTE: "(GNS) MINIMUM."

PAGE 12, PARA 3.3.2.17, AFTER "NSN" ADD

"AND THE UNIVERSAL PRODUCT CODE (UPC)

SUPPLIED BY THE GOVERNMENT, FOR ALL NSNs."

ADDITIONAL INFORMATION FOR MIL-L-40051:

INTERIM CHANGES TO MIL-L-40051E:

PAGE 1...(PARA. I.2 )..ACROSS FROM TYPE II:

DELETE "3.1" AND SUBSTITUTE "3.0"

PAGE 3...(PARA 3.5 )..DELETE "3.1" AND

SUBSTITUTE "3.0"

PAGE 4, PARA. 3.15: DELETE IN ITS ENTIRETY

PAGE 8, TABLE II: END ITEM TESTS: DELETE

"OIL ABSORPTION RESISTANCE (TREATMENT A)"

PAGE 7..(PARA 4.4.3)..UNDER THICKNESS, ACROSS

FORM TYPE II: DELETE "3.1" AND SUBSTITUTE "3.0"

PAGE 11, PARA 4.5.3, OIL ABSORPTION: DELETE IN

ITS ENTIRETY.

PAGE 12, PARA 6.7 MINERAL OIL: DELETE IN ITS

ENTIRETY.

LIST OF APPROVED WATER RESISTANT COMPOUNDS FOR

GLOVES, MEN'S AND WOMEN'S, LIGHT DUTY,

MIL-G-822; GLOVES, MEN'S AND WOMEN'S,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

LEATHER, LIGHT DUTY, A-A-52055; GLOVES,

MEN'S AND WOMEN'S, INTERMEDIATE COLD/WET,

MIL-G-44419:

WATER RESISTANT COMPOUNDS:

FC-236 A/B - A TWO PART COMBINATION WATER AND

. OIL REPELLENT CHEMICAL FOR LEATHER

. PART A IS A WATER SOLUBLE FLUOROCHEMICAL

. PART B IS A FLUOROCHEMICAL RESIN EMULSION

. EMPLOYING MIBK AS A CARRIER SOLVENT

FC-3560/FC-3567 - A TWO PART COMBINATION WATER

. AND OIL REPELLENT CHEMICAL FOR

. LEATHER

. FC-3560 IS A WATER SOLUBLE FLUOROCHEMICAL

. FC-3567 IS A FLUOROCHEMICAL RESIN

. EMULSION EMPLOYING A NON-FLAMMABLE

. EMULSIFIER (1%) CONTAINING NO METHYL

. ISOBUTYL KETONE

NOTE: MIBK HAS BEEN SHOWN TO BE A RESPIRATORY

IRRITANT AND CARRIES AN OSHA STANDARD FOR AIR OF

100 PPM, TIME WEIGHTED AVERAGE (TWA). CARE MUST

BE TAKEN BY LEATHER PROCESSORS TO ADHERE TO

THIS STANDARD WHEN USING FC-236 A/B.

SUPPLIER FOR THE ABOVE COMPOUNDS - 3-M COMPANY.

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND

ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF

THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL

PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,

AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED.

THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN

BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH

THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE

CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION

(INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE."

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE

SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

"THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1,

PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA.

5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER

"TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE

LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500

VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A

PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE

(5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED.

THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE

PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL

DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT

NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE

SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

"REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS

THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS

DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE

MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN

4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER

THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE

INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE

WITH "406D".

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY

FOR THE TEST."

(Ref. T0215)

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

(ref. T0216 - May 18, 2006)

ADDITIONAL INFORMATION FOR ASTM-D-6193(2004)OR LATEST VERSION:

NO ADDITIONAL INFORMATION FOLLOWS.

(Ref. T8068 - May 18, 2006)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2

STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

,,,,,, - MILITARY MARKING FOR SHIPMENT AND STORAGE

,,,,,, DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C<(>&<)>T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C<(>&<)>T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C<(>&<)>T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST

CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE"

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E

w/CHANGE 1 23 December 2013

SUPERSEDING

MIL-STD-147E

16 May 2008

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

ADDITIONAL INFORMATION FOR MIL-STD-749:

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR DD 22571 5-6-2:

NO ADDITIONAL INFORMATION

ADDITIONAL INFORMATION FOR DD 22571 5-6-1, SH 1:

FOR CARTOON, SHEET 1, 7 SEP 84

ADDITIONAL INFORMATION FOR DD 22571 5-6-1, SH 2:

FOR CARTOON, SHEET 2, 7 SEP 84

ADDITIONAL INFORMATION FOR DD 22571 5-1-45E:

FLAG,HEADING, TYPE II

CARTOON 5-6-2-1 3/191982

CARTOON 5-6-2-2 3/191982

CARTOON 5-6-2-3 3/191982

CARTOON 5-6-2-4 3/191982

CARTOON 5-6-2-5 3/191982

Two (2) First Article samples are required. First Article Testing shall be performed and the contractor will be notified in writing within thirty (30) calendar days after Contracting Officer's receipt of First Article samples.

IAW BASIC SPEC NR MIL-F-2692H NOT 2

REVISION NR H DTD 05/18/2001

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 22571 5-6-1

REVISION NR DTD 01/04/1999

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 22571 5-1-45E

REVISION NR 2 DTD 10/02/1981

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 22571 5-6-2

REVISION NR DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 22571 5-6-2B

REVISION NR DTD

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-C-606F

REVISION NR F DTD 12/18/1987

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-F-2310D NOT 3

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

REVISION NR D DTD 03/27/2001

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-F-14648A NOT 3

REVISION NR A DTD 07/21/2001

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-I-14653 NOT 3

REVISION NR DTD 07/21/2001

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-32075

REVISION NR DTD 10/17/2000

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-L-40051E

REVISION NR E DTD 03/29/1991

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-105E NOT 3

REVISION NR E DTD 02/06/2008

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(1)

REVISION NR R DTD 05/24/2018

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-147E(1)

REVISION NR E DTD 12/23/2013

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-749B(2)

REVISION NR B DTD 08/29/1969

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-1249A NOT 1

REVISION NR A DTD 04/08/1996

PART PIECE NUMBER:

IAW REFERENCE CID A-A-203C NOT 3

REVISION NR C DTD 11/19/2004

PART PIECE NUMBER:

IAW REFERENCE CID A-A-1249A NOT 2

REVISION NR A DTD 02/15/2000

PART PIECE NUMBER:

IAW REFERENCE CID A-A-1894B NOT 1

REVISION NR B DTD 10/20/1999

PART PIECE NUMBER:

IAW REFERENCE CID A-A-50145

REVISION NR DTD 04/20/1988

PART PIECE NUMBER:

IAW REFERENCE CID A-A-52094A NOT 1

REVISION NR A DTD 02/28/2017

PART PIECE NUMBER:

IAW REFERENCE UNK KK-L-2004 NOT 2

REVISION NR DTD 06/20/2007

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 33 PAGES

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

CONTINUED ON NEXT PAGE

IAW REFERENCE UNK UU-P-268G(3) NOT 1

REVISION NR 3 DTD 07/13/1995

PART PIECE NUMBER:

IAW REFERENCE UNK CCC-C-430F NOT 1

REVISION NR F DTD 08/11/1989

PART PIECE NUMBER:

IAW REFERENCE UNK PPP-B-636J(4) NOT 1

REVISION NR 4 DTD 03/01/1994

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-191A(6) NOT 7

REVISION NR A DTD 08/09/2000

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-751A(1)(1) NOT 2

REVISION NR 1 DTD 09/14/1999

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ANSI/ASQC Z1.4-2003

REVISION NR DTD 01/01/2003

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ASTM D-6193

REVISION NR DTD 01/01/2011

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ANSI/ASQZ1.4-2003

REVISION NR DTD 01/01/2003

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (SEP 2016)

SECTION D - PACKAGING AND MARKING

PACKAGING DATA

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:XX

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PRES/PACK LEVELS SHALL BE A/C IN

ACCORDANCE WITH MIL-F-14648.

SHIPPING CONTAINER QTY. 10 SHALL BE IN

ACCORDANCE WITH MIL-F-14648.

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING

MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 22 OF 33 PAGES

SECTION D - PACKAGING AND MARKING (CONTINUED)

CONTINUED ON NEXT PAGE

States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS

SHALL NOT EXCEED 43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES

IN HEIGHT (INCLUDING THE PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING

MATERIALS. THE USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS

(WPM) - (JULY 2006)

NOTE: WHEN THE CONTRACT OR DELIVERY QUANTITY

SUPPORTS THE USE OF A PALLET, PALLETIZATION

REQUIREMENTS SHALL APPLY.

252.211-7006 PASSIVE RADIO FREQUENCY IDENTIFICATION (JUN 2016) DFARS

As prescribed in 211.275-3, use the following clause:

(a) Definitions. As used in this clause…