SPE1C119Q0015.PDF

PDF 754 KB Posted Oct 12, 2018

Attached to: EARPAD SET, FLYER'S Federal contract opportunity
Solicitation number: SPE1C119Q0015
Issued by: Defense Logistics Agency Troop Support Clothing and Textiles

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE1C1-19-Q-0015

2. DATE ISSUED

2018 OCT 12

3. REQUISITION/PURCHASE REQUEST NO.

0076613790

RATING

DO-C9

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: DAVID FALKOWSKI DDF0036 Tel: 215-737-5395 Email: David.Falkowski@dla.mil

6. DELIVER BY (Date)

SEE SCHEDULE

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 OCT 30

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 65 PAGES

SPE1C1-19-Q-0015

CONTINUED ON NEXT PAGE

IMPORTANT NOTICE

“The provisions/clauses as indicated in the DLA Master Solicitation for Solicitations, REV 20 dated January 2014 and resulting awards are hereby applicable and incorporated by reference. The Master Solicitation can be found on the Web at http://www.dla.mil/Acquisition/Pages/Automaster_EProcurement.aspx”.

In addition to the master solicitation referenced, please ensure you review any additional clauses/provisions that are incorporated into this solicitation. Failure to submit these clauses/provisions may render your quote as non-compliant and it will not be considered for award.

CAUTION NOTICES

1. ELECTRONIC INVOICING AND ADVANCED SHIPMENT NOTIFICATIONS (ASN)

The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office.

Utilization of Wide Area Workflow – Receipts and Acceptance (WAWF-RA) in conjunction with DFARS 252.232-7003, ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (JUN 2012).

The Directorate of Clothing and Textiles utilizes VIM-ASAP, which is short for DLA Virtual Item Manager ARN Supply- Chain Automated Processing, to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels. VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time.

Advanced Shipment Notifications (ASNs) associated with DFARS clause 252.211-7006, PASSIVE RADIO FREQUENCY IDENTIFICATION (SEP 2011) are sent via VIM-ASAP to WAWF-RA processes.

Please contact the VIM-ASAP help desk at 888-940-7348 to get started today!

For questions about sending Electronic Data Interchange invoices (810-invoice transactions), contact Mr. Bud Wellens at 1-215-737-2778

For questions about invoice preparation, just call the DFAS Customer Service Resource Center at 1-800-756-4571, or Call DSCP DFAS liaisons listed below for assistance: Camille Conaway 1-215-737-4406

Check out these resources:

http://www.dfas.mil/money/vendor/ …. the DFAS Contract Payment Booklet… an excellent desk reference for contractor Accounts Receivable personnel, as well as the status of outstanding invoices.

http://www.dfas.mil/ …. information regarding bill paying process and additional points of contact

2. CHANGED REQUIREMENTS FOR ACCESS TO VIM

Please note: Vendors under contract with DLA Troop Support Clothing & Textiles are able to use a web-based application called VIM, or Virtual Item Manager (https://vim.dla.mil). VIM allows manufacturers to generate and transmit contract documents such as Delivery Orders (DD1155s) and Material Inspection and Receiving Reports (DD250s). Previously, vendors registered using a user ID and password; however, soon all vendors must use an ECA certificate to access VIM.

Please see below for more information.

Why is VIM requiring access via ECA certificate?

DoDI 8520.2 Mandates the use of DoD PKI identity certificates when accessing DoD information systems. The DoD established the External Certification Authority (ECA) program to support the issuance of DoD- approved certificates to industry partners and other external entities and organizations. ECA certificates enable contractors to securely communicate with the DoD and authenticate themselves to DoD Information Systems.

What are ECA Certificates?

ECA Certificates are individually issued digital identity credentials. The DoD relies upon these credentials to ensure the identity of the user in online environments or when a certificate holder tries accessing DoD Information Systems.

ECA Certificates are stored either on hardware devices (smart cards or USB devices) or software versions (stored on your computer’s hard drive).

You will use your certificate to:

1) Establish your identity when trying to access a protected site

2) Legally "sign" a document, form or application

3) Encrypt messages (email) or documents to ensure confidentiality

Much like a driver’s license or a passport, they are unique to each individual, and cannot be shared. It is against DoD Regulations to share a username and password or allow someone to access another's ECA certificate for any reason.

Violation of this policy will result in the immediate revocation of the original owner’s certificate.

How can I obtain an ECA Certificate?

The following are the three entities authorized by the DoD to issue ECA Certificates. Review and apply for an ECA Certificate from one of the below organizations to access your VIM account:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 65 PAGES

CONTINUED ON NEXT PAGE

1) IdenTrust: http://www.identrust.com/certificates/eca/index.html

2) ORC (Operational Research Consultants): http://eca.orc.com/

3) VeriSign: https://eca.verisign.com/

I have an ECA Certificate, how do I access VIM now?

Simply log into VIM with your existing User ID and Password as usual and then follow the steps:

1) Under Menu, click the “Certificate Registration” option

2) Read the brief instruction and then click “Continue”

3) Your certificate will display in a pop-up. Select the certificate and click “Continue”

4) You will be prompted to enter your current password for confirmation and click “OK”

5) The message displays “Your Certificate has been successfully registered…” Click “OK” to complete the process. You will be logged out of VIM and prompted to login with your certificate.

6) Click “Accept” to the Terms and then select “Certificate Login”.

7) Your certificate will display in a pop-up. Select the certificate and click “OK” and you will be logged into your VIM account.

Remember, your old login credentials will no longer be valid and you will use your certificate to login into VIM.

3. Offerors are cautioned that facsimile proposals, modifications to proposals, acknowledgement of amendments, withdrawal of proposal, responses to negotiations, and/or final proposal revisions will only be considered when facsimile proposals are authorized. Telegraphic offers will not be considered unless authorized by the solicitation;

however, offers may be modified by written or telegraphic notice.

4. Stop shipment delays and rejections!

For deliveries to Lansing, MI; Pendergrass, GA; Austin, TX depots, ensure your Government or Commercial Bills of Lading are correctly annotated with the following information in the description of articles:

Weight Pieces National Stock Number(s) (NSNs) Contract Number Shipment Number

Delivery appointments are required for these locations. Your truckers/dispatchers/brokers/etc. should have the above information readily available when calling to schedule delivery appointments as follows:

Travis Association for the Blind (Austin, TX) – 512-615-4701

Peckham Vocational Industries (Lansing, MI) – 517-316-4226

LVI- OCIE SE (Pendergrass, GA) – 706-693-1918 Option #1

Don’t let the following common invoicing errors delay your payments any longer:

Missing or Erroneous Contract Number Missing Call/Delivery Order Number Missing or Erroneous Shipment Number Failure to Mark DD250 as an Original Invoice Failure to Distribute a Copy of the DD250 to the Contract Administration Office Terminal Contract Line Item Number (CLIN) is Omitted, Incorrect or Does Not Match that Appearing in the Contract Missing or Erroneous Unit of Issue Quantity and Price are Incorrect Wrong Pay Office on Invoice

Here are three things you can do to speed your invoice payments:

Be sure your original invoice is properly completed and legible.

Submit your invoices electronically using the Web Invoicing System (WInS). It's fast, accurate, and costs you nothing! Learn more at the WInS Home Page, at:

https://www.ecweb.dfas.mil/notes/,and start using WInS with your next invoice!

If you currently receive delivery orders electronically, you could benefit by using an 810- invoice transaction.

Web Invoicing eliminates postage, snail mail, and much paperwork, and gets the invoice/voucher into the DFAS system usually within 24 hours. Web Invoicing is free to vendors doing business with the Government. You just enter the appropriate information and send your invoice to DFAS electronically. It provides help text and pull-down menus in many fields. For more specific questions, contact Janice Hockman (703) 607-5111, Kirsten Larco (703) 607-4920 or Debra Jones (703) 607-2082.

For questions about sending Electronic Data Interchange invoices (810-invoice transactions), contact Mr. Bud Wellens at (215) 737-2778

For questions about paper invoice preparation, just call the DFAS Customer Service Resource Center at 1-800 756-4571, or

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 65 PAGES

CONTINUED ON NEXT PAGE

Call DLA Troop Support DFAS liaisons listed below for assistance:

Camille Conaway (215) 737-4406

Check out these resources:

http://www.dfas.mil/money/vendor the DFAS Contract Payment Booklet… an excellent desk reference for contractor Accounts Receivable personnel, as well as the status of outstanding invoices.

http://www.dfas.mil/ information regarding bill paying process and additional points of contact.

5. Please note that the Patient Protection and Affordable Health Care Act ("the Act"), 124 Stat. 119, imposes duties upon employers concerning the provision of health care to their employees. Health insurance costs, including any costs associated with compliance with changes in the applicable law, are the sole responsibility of the offeror. Offerors are advised that their proposals should include any costs associated with the implementation of the Act. Any changes in health coverage costs and/or costs associated with compliance, occurring after award of a contract pursuant to this solicitation will not form the basis for an equitable adjustment of the contract price.

6. Pursuant to FAR clause 52.222-54 vendors are required to enroll in the E-Verify program within thirty days after the date of a contract award and comply with all terms of the clause. In addition, vendors are required to provide evidence of their enrollment in the E-verify program to the contracting officer within 30 days after the date of a contract award.

SOLICITATION COMMENTS

Item Description: Earpad Set, Flyer's - Softseal/Hush Kit Combo

NSN: 8475-01-520-9471 (Oregon Aero P/N 28118)

Quantity: 2,250

TQ NOTES

Shipping Label Requirements - Military Standard (MIL-STD) 129

Shipping Label Requirements - Military Standard (MIL-STD) 129, ALT I

Shipping Label Requirements - Military Standard (MIL-STD) 147

Removal of Government Identification for Non-Accepted Supplies

Requirements for Treatment of Wood Packaging Material (WPM)

1. Inspection at Source. Acceptance at Source. FOB Destination.

2. The following applies to clause 52.246-11 - Higher Level Contract Quality Requirement:

ANSI/ISO/ASQ 9001-2008 (excluding para. 7.3) or equivalent.

Certification or Registration of a contractor's quality system or program is not required by DOD if ANSI/ASQ standards are used.

3. The following documents are hereby incorporated into the subject solicitation by reference:

• DSCPM 4155.3, Quality Systems Requirements, November 3, 1997

4. Clause 252.204-7009 - Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (OCT 2016)

5. A completed and signed copy of this solicitation SHALL be returned to the acquisition specialist no later than the closing date listed on the solicitation. All completed copies can be forwarded to the acquisition specialist at:

DLA Troop Support

700 Robbins Avenue

Philadelphia, PA 19111

Attn: Dave Falkowski

Mailstop: 3B-5205

Phone: (215) 737-5395

* Alternatively, a completed and signed copy of the solicitation can be emailed directly to the acquisition specialist at david.falkowski@dla.mil.

* Please note that offers submitted via DIBBS will NOT BE ACCEPTED. A completed copy of this solicitation must be returned to the acquisition specialist in order to be considered for award. Any offeror who submits its offer solely

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 65 PAGES

CONTINUED ON NEXT PAGE

through DIBBS without sending a completed copy to the acquisition specialist will be considered noncompliant and maybe ineligible for award.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: PGC: 34738

ITEM DESCRIPTION:

SOFTSEAL/HUSH KIT COMBO

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

EARPAD SET, FLYER'S HELMET

1-1/8-INCH

Oregon Aero, Inc. DBA 0WY76 P/N 28118

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 8475-01-520-9471 36.000 EA $ ________________ $ ________________

EARPAD SET,FLYER'S

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 2% MINUS 2%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

APPLY. LOT NUMBERING SHALL BE IN ACCORDANCE WITH MIL-STD-129 AND

DSCP-4155.3.

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING

MATERIALS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS

SHALL NOT EXCEED 43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES

IN HEIGHT (INCLUDING THE PALLET).

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING

MATERIALS. THE USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS

(WPM) - (JULY 2006)

252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required (ref. T8379; Nov. 08, 2006)

PARCEL POST ADDRESS:

UY0157

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

LANSING MI 48906

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 65 PAGES

CONTINUED ON NEXT PAGE

SUPPLY/SERVICE: PGC: 34738 CONT'D

0002 8475-01-520-9471 48.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 65 PAGES

CONTINUED ON NEXT PAGE

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0003 8475-01-520-9471 50.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 120 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0004 8475-01-520-9471 44.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 150 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 65 PAGES

CONTINUED ON NEXT PAGE

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0005 8475-01-520-9471 46.000 EA $ ________________ $ ________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 2% MINUS 2%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 180 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0006 8475-01-520-9471 29.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 210 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

MATERIALS:

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0007 8475-01-520-9471 30.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 240 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0008 8475-01-520-9471 88.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 270 DAYS ADO

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 65 PAGES

CONTINUED ON NEXT PAGE

PECKHAM INC

OCIE NORTH 3PL

5408 W GRAND RIVER AVE BLDG B

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0157

PECKHAM INC

OCIE 3PL

5408 W GRAND RIVER AVE BLDG B

0009 8475-01-520-9471 27.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 60 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 34738 CONT'D

exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

UY0159

LVI - OCIE SE

PENDERGRASS DISTRIBUTION CENTER

596 BONNIE VALENTINE WAY DOOR 28

PENDERGRASS GA 30567

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

FREIGHT SHIPPING ADDRESS:

UY0159

LVI - OCIE SE

PENDERGRASS DISTRIBUTION CENTER

596 BONNIE VALENTINE WAY DOOR 28

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 21 OF 65 PAGES

CONTINUED ON NEXT PAGE

0010 8475-01-520-9471 97.000 EA $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:X PRESV MAT:00

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:XX OPI:O

INTRMDTE CONT:XX INTRMDTE CONT QTY:XXX

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PACKAGING SHALL BE AS PER ASTM-D-3951, MIL-STD-129 AND MIL-HDBK-774

MATERIALS:

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it.