SPE1C118T2047.PDF

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE1C1-18-T-2047

2. DATE ISSUED

2018 SEP 25

3. REQUISITION/PURCHASE REQUEST NO.

0076425802

RATING

DO-C9

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Name: John Fricker Buyer Code:PSPTPE3 Tel: 215-737-3888 Fax: 215-737-7081 Email: JOHN.FRICKER@DLA.MIL

6. DELIVER BY (Date)

71 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%)

15. Date of Quotation

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 OCT 05

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

PAGE OF PAGES

POC INFORMATION:

WHEN TECHNICAL DATA IS PROVIDED IT MUST BE OBTAINED AT:https://pcf1x.bsm.dla.mil/cfolders. DISCREPANCIES FOUND IN TECHNICAL DATA SHOULD SUBMIT REQUEST TO THE DLA CUSTOMER SERVICE WEBSITE:https://www.pdmd.dla.mil/cs/

ALL OTHER QUESTIONS (SOLICITATION REQUIREMENTS, ITEM DESCRIPTION, AWARD CHOICE, ETC.), PLEASE CONTACT THE BUYER SHOWN ABOVE.

QUESTIONS REGARDING OPERATION OF THE DLA-BSM INTERNET BID BOARD SYSTEM SHOULD BE E-MAILED TO: DibbsBSM@dla.mil

FOR IMMEDIATE ASSISTANCE, PLEASE REFER TO THE FREQUENTLY ASKED QUESTIONS (FAQS) ON BSM DIBBS AT:

https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm OR PHONE 1-855-DLA-0001 (1-855-352-0001).

MASTER SOLICITATION

THIS SOLICITATION INCORPORATES THE TERMS AND CONDITIONS SET FORTH IN THE DLA MASTER SOLICITATION FOR AUTOMATED SIMPLIFIED

ACQUISITIONS REVISION 50 (JULY 9, 2018) WHICH CAN BE FOUND ON THE WEB AT:

http://www.dla.mil/Portals/104/Documents/J7Acquisition/Master%20Solicitation%20Rev-50%20July-9-18.pdf?ver=2018-07-09-071953-083

This solicitation incorporates technical/quality requirements (‘R’ or ‘I’ number in section B). The full text is in the DLA Technical and Quality Master List of Requirements at:

http://www.dla.mil/HQ/Acquisition/Offers/eprocurement.aspx The revisionof the TQ Master in effect on the award date controls.

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

1 32

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 32 PAGES

SPE1C1-18-T-2047

CONTINUED ON NEXT PAGE

SECTION A

THIS BUY MAY BE A CANDIDATE FOR AUTOMATED AWARD. HOWEVER, AUTOMATED

SOLICITATIONS CONTAINING FIRST ARTICLE TEST REQUIREMENTS ARE NOT

CANDIDATES FOR AN AUTOMATED AWARD. ALL QUOTES MUST BE SUBMITTED VIA THE

DLA INTERNET BID BOARD SYSTEM (DIBBS) AT https://www.dibbs.bsm.dla.mil.

MICRO-PURCHASE QUOTES MAY BE AWARDED PRIOR TO RETURN DATE.

FAR 52.219-6 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE

NORTH AMERICAN INDUSTRY CLASSIFICATION SYSTEM 315210 SEE http://www.sba.gov/content/table-small-business-size-standards

FOR THE CORRESPONDING SMALL BUSINESS SIZE STANDARD.

DFARS 252.225-7001, BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM,

APPLIES TO ALL QUOTES ABOVE THE MICRO-PURCHASE THRESHOLD.

DESTINATION INSPECTION REQUIRED - FAR 52.246-2 APPLIES.

This solicitation contemplates an award based on destination inspection.

If an offeror proposes inspection and acceptance at origin, then an evaluation factor IAW Procurement Note E07 will be added to the offeror's quoted/offered price for each origin inspection required. If phased deliveries are required or offered, each phase of delivery will be presumed to result in one inspection.

Fast Pay does not apply to this solicitation

3 EACH FIRST ARTICLES MUST BE SUBMITTED TO BUYER.

Offerors are encouraged to submit price break information with their quotes. Solicitations which are manually evaluated and awarded at

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION A

increased quantities may be awarded based on the price break information submitted with the offeror's original quotation without further solicitation or discussion.

If you anticipate quoting on a solicitation after the closing date, please submit a DIBBS quote with a bid type of “No Bid” and place an anticipated quote date or the reason you are not willing to quote. This does not prevent you from submitting an actual quote on DIBBS at a later date. It will overlay your previous no quote. This informs buyers of your intention to quote and prevents multiple calls for updates and cancelling of requirements assumed to be non-procurable due to no quotes/sources. The submission of an anticipated quote date does not preclude DLA from making an award to another acceptable timely offer.

DLA funds Procurement Technical Assistance Centers (PTACs) to increase the number of U.S. businesses capable of bidding and performing on local, state, and federal government contracts. PTACs have government contracting experts available to assist suppliers at no cost. Visit our website to find your local PTAC:

http://www.dla.mil/HQ/SmallBusiness/PTAP.aspx

FAR 52.204-23, Products and Services Developed or Provided by Kaspersky

Lab and Other Covered Entities (Jul 2018), applies to all awards made on or after July 16, 2018.

Procurement History for NSN/FSC:016573272/8455

CAGE Contract Number Quantity Unit Cost AWD Date

0ZVY9 SPE1C118V0616 100000.000 0.60000 20180724

75556 SPE1C116M1968 2334.000 0.54000 20160915

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PR: 0076425802

NSN/MATERIAL:8455016573272

ITEM DESCRIPTION

INSIGNIA,GRADE,ENLI

INSIGNIA, GRADE, ENLISTED PERSONNEL, AIR FORCE, "

AIRMAN FIRST CLASS E3, CLOTH RANK, 2X2, USAF ACU-OCP

EMBROIDERY IN THE SPICE BROWN 67196

WITH BORDER IN THE KHAKI 67193

ON MULTI-CAM PATTERN

SEWING THREAD, BAGBY GREEN 67204

WITH HOOK FASTENER TAPE BACKING, TAN 499

STITCHES COUNT 493 MINIMUM

TYPE XII, CLASS 12

DD 22571 B-3-134, 2/25/2010

CARTOON B-3-127-2 10/15/1999.

ADDITIONAL INFORMATION FOR MIL-DTL-14651A

. CAUTION NOTICE

THE DEPARTMENT OF DEFENSE IS PROHIBITED BY THE

PROVISIONS OF THE BERRY AMENDMENT FROM

PROCURING ITEMS OF CLOTHING THAT HAVE NOT

BEEN GROWN OR PRODUCED IN THE UNITED STATES

OR ITS POSSESSIONS.

ALTHOUGH THE DOCUMENT CALLS FOR MORE THAN ONE

YARN, ONLY THE ALTERNATE CITED TO RAYON IN

THIS CASE POLYESTER, WILL BE CONSIDERED FOR

DLA TROOP SUPPORT CONTRACTS.

IF OTHER THAN SCHIFFLI EMBROIDERY MACHINE IS

USED, THE STITCH COUNT ON GOVERNMENT CARTOON

MUST BE DOUBLED.

THE NEW CAMOUFLAGE PATTRN WILL BE THE OPERATION

ENDURING FREEDOM CAMOUFLAGE PATTERN (OCP)

INSIGNIA SHALL BE FABRICATED IN ACCORDANCE

MIL-DTL 14651A DATED, 15 OCTOBER 2010 AND

APPLICABLE CARTOON AND DRAWING.

FOLLOWING THE ABOVE INFORMATION:

A.U.S. ARMY RANK INSIGNIA SHALL BE EMBROIDERED

ON THE OCP PATTERN OF THE NYLON/COTTON WIND

RESISTANT POPLIN CLOTH CONFORMING TO CLASS

11 OF MIL-C-44436(GL) WITH HOOK FASTENER

ON THE REVERSE SIDE.

B. THE LENGTH OF THE CLOTH SHALL BE CUT IN

THE FILLING DIRECTION (I.E., FROM SELVAGE

TO SELVAGE).

A STRIP OF WASHABLE FUSIBLE INTERLINING SHALL BE

CENTERED AND FUSED TO THE UNDERSIDE OF

THE CUT FABRIC. THE OVERALL FINISHED

SIZE FOR RANKS SHALL BE AS FOLLOWS:

GENERAL AND LIEUTENANT GENERAL SHALL BE 2 INCHES

WIDE AND 3-1/4 INCHES HIGH.

MAJOR AND BRIGADIER GENERAL SHALL BE

2 INCHES WIDE BY 2 INCHES TALL COLONEL -

PRIVATE (0-6 THROUGH E-2) SHALL BE 2 INCHES WIDE

BY 2 INCHES HIGH.

C. ALL GENERAL STARS SHALL BE 3/4 INCH IN

DIAMETER, POINT TO VERTEX, 1/8 APART.

D. EMBROIDERED

1-ARMY

ALL EMBROIDERY SHALL BE A GOOD MATCH TO BLACK

CABLE HAN 67138 EXCEPT 2ND LIEUTENANT AND MAJOR

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SHALL BE A GOOD MATCH TO BRONZE CABLE HAW 67147

AND WARRANT OFFICERS SHALL BE A GOOD MATCH TO

BAGBY GREEN HDD 67204 AND BLACK HAN CABLE 67138.

2-AIR FORCE

ENLISTED:

- EMBROIDERED DEVICES SHALL BE SPICE BROWN 67196.

BORDER SHALL BE KHAKI 67193.

OFFICER:

- NO BORDER.

- ALL EMBROIDERED SHALL BE BLACK 67138. EXCEPT SECOND

LIEUTENANT AND MAJOR SHALL BE SPICE BROWN 67196.

E.THE HOOK FASTENER SHALL BE TAN 499 AND COVER THE

ENTIRE BACK OF THE BASE CLOTH AND SHALL BE SEWN

TO THE HEMMED EDGE USING THREAD

THAT IS A GOOD MATCH TO THE BAGBY GREEN

HDD 67204 OF THE DEPARTMENT OF DEFENSE

STANDARD SHADE FOR HERALDIC YARNS FOR

OPERATION ENDURING FREEDOM CAMOUFLAGE PATTERN (OCP)

SAMPLES MUST BE APPROVED BY MELANIE KING, NATICK

SOLDIERS CENTER, KANSAS STREET, NATICK<(>,<)>

MA 01760-5019, TELEPHONE 508-233-5468."

THESE DEVIATION TO THE SPEC HAVE BEEN APPROVED

BY PAMELA MADIGAN OF IOH.

ADDITIONAL INTERIM CHANGES TO MIL-DTL-14651A.

DEPARTMENT OF DEFENSE STANDARD SHADE FOR

HERALDIC YARNS FOR EMBROIDERY AND RIBBONS)<(>,<)>

THE INSIGNIA FOR GENERAL AND LIEUTENANT GENERAL

SHALL HAVE THE SAME SIZE(2 INCH BY 3-1/4 INCH)

FASTENER ATTACHED TO THE HOOK FASTENER.

F.IN THE INTERIM, THE HOOK SHALL BE TAN 499

THE COLOR OF THREAD USED TO ATTACH THE HOOK

SHALL BE BAGBY GREEN HDD 67204

G.THE HOOK FASTENER SHALL BE TYPE II, CLASS 1

OR TYPE III, CLASS 4 OF A-A-55126. THE HOOK FASTENER

SHALL BE FREE OF SLIT OR SPLIT EDGES.VELCRO BRAND

HTH 841 EXTRUDEDHOOK OR SIMILAR BRAND OFFERING A

MINIMUM OF 1 POUND PEEL PER INCH AND 30 POUND PER

SQUARE INCH SHEAR STRENGTH MAY BE USED.

H.THE EMBROIDERY NEEDLE THREAD SHALL BE

POLYESTER FILAMENT. THE BOBBIN THREAD

SHALL BE EITHER A COTTON WARP,POLYCOTE<(>,<)>

TYPE I, TICKET 50, 2 PLY CONFORMING TO A^A-50199 OR A

100% NYLON, TYPE I, CLASS A, 210 DENIER

(7O/3PLY) CONFORMING TO V-T-295.

I.THE SEWING THREAD SHALL BE BAGBY GREEN HDD 67204

CONFORMING TO A-A-50199 AND BE COTTON

(TYPE I) OR POLYESTER COVERED POLYESTER CORE

(TYPE II),COMMERCIAL SIZE TICKET NO.50

(TEX SIZE 36 TO 45) WITH A MINIMUM BREAKING

STRENGTH OF 3.2 POUNDS. (TYPE I) AND 3.7 POUNDS

(TYPE II) WHEN TESTED AS SPECIFIED IN ASTM D 256

AS AN ALTERNATE, TICKET NO.70(TEX SIZE 31 TO 35)

WITH A BREAKING STRENGTH OF 2.6 POUNDS

(TYPE I) AND 3.0 POUNDS (TYPE II)<(>,<)>

WHEN TESTED IN ACCORDANCE WITH ASTM-D-2256 MAY BE

USED AS THE BOBBIN OR LOOPER THREAD.

ALL THREAD SHALL BE NON-STAINING AND SHOW GOOD

COLORFASTNESS TO LAUNDERING.

ALL CHANGES HAVE BEEN APPROVED BY IOH.

THE OCP RANK INSIGNIA ARE CONTROLLED ITEMS WHICH

SHALL NOT BE AVAILABLE TO U.S. ARMY UNITS OTHER

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

THAN THOSE ARE SERVING IN SUPPORT OF AFGHANISTAN.

PROCUREMENT OF THE OCP SHALL BE LIMITED TO THOSE

APPROVED CERTIFIED MANUFACTURERS PROVIDED BY IOH.

THE FOLLOWING TIOH CERTIFIED MANUFACTURERS HAVE BEEN

APPROVED TO MAKE THE RANK INSIGNIA AND BRANCH OF

SERVICE(BOS) TAPES.

A.,,AB EMBLEM/CONRAD

POC: MR. BEN HARRIS 888-438-6773

ben'at'abemblem.com

B.,,ACTION EMBROIDERY

POC: MR. IRA NEWMAN 800-638-7223

ijnewman'at'actionemb.com

C.IRA GREEN, INC.

POC: MR. MICHAEL MCALLISTER 800-663-7487

mmcallister'at'iragreen.com

D.SAYRE ENTERPRISES

POC: MS. PAM THOMPSON 540-261-1546

pthompson'at'sayreinc.com

E. VANGUARD INDUSTRIES

POC: MR. BRIAN ROBERTSON 800-433-1334

brobertson'at'vanguardmil.com

FOR NAMETAPES ONLY.

A.,,AAFES NAMETAPE PLANT

POC: DIANE EGAN 502-942-4295

B.,,BADGEMAN

POC: FAYE HUBBLE- 888-391-2668

FOR ANY QUESTION OR ADDITION REQUIRED INFORMATION<(>,<)>

YOU MAY CONTACT MRS. SHERRY O'CONNOR, DSN 656-4982

COMMERCIAL 703-806-4982 OR EMAIL

sherry.ocornnor'at'us.army.mil

PAGE 10, PARAGRAPH 3.3.5.1 EXCEPT TYPE III, STYLE 3

(MARINES, DRESS AND BAND DRESS) AND 4, AND TYPE VI

STYLE 2(INSIGNIA, STRIPES, SERVICES, MARINE CORPS).

THE BASE CLOTH FOR ALL INSIGNIA EXCEPT THOSE LISTED

ABOVE, SHALL BE 100 PERCENT COTTON, 50/50 POLYESTER/COTTON<(>,<)>

OR 65/35 POLYESTER/COTTON, THREE UP, ONE DOWN, LEFT

HAND TWILL, 7.0 TO 8.3 OUNCES PER SQUARE YARD, SINGLE

FLY WARP AND FILLING, WITH BREAKING STRENGTH OF NOT

LESS THAN 150 LBS.

INTERIM CHANGES TO MIL-DTL-14651A ARE AS

FOLLOWS:

PAGE 2 UNDER COLUMN TYPE IV GENERAL OFFICER

AFTER STYLE 6, ADD "STYLE 7, AIR FORCE BATTLE

UNIFORM (ABU) GREY SUBDUED FOR CLASS 1-4, SIZE 1".

PAGE 2 UNDER COLUMN TYPE V, AFTER STYLE 4<(>,<)>

ADD "STYLE 6, AIR FORCE BATTLE UNIFORM (ABU)

GREY SUBDUED FOR CLASS 1-6".

PAGE 3, UNDER COLUMN TYPE VIII, AFTER STYLE 3

ADD "STYLE 4", AIR FORCE BATTLE UNIFORM (ABU)

GREY SUBDUED."

PAGE 4, UNDER COLUMN TYPE X AFTER STYLE 4 ADD

"STYLE 6, AIR FORCE BATTLE UNIFORM (ABU) GREY SUBDUED."

PAGE 4, UNDER COLUMN TYPE XII AFTER STYLE 2 ADD

"STYLE 3, AIR FORCE BATTLE UNIFORM (ABU) GREY SUBDUED."

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PAGE 6, BASE CLOTH AT THE END OF PARAGRAPH ADD<(>,<)>

"US AIR FORCE OCCUPATIONAL BADGES FOR ABU SHALL

BE EMBROIDERED ON 100% TEXTURIZED POLYESTER TWILL BASE

CLOTH MATCHING AIR FORCE GREY 1640."

PAGE 7, PARA 3.1 FIRST ARTICLE. AT THE END OF

OF PARA, ADD " THE FIRST ARTICLE SHALL BE

BEST QUALITY PRE-PRODUCTION SAMPLES.

THE FIRST ARTICLE SAMPLES MUST PACKAGED AND

LABELED IN THE SAME MANNER AS THE CONTRACT

UNIT QUANTITY.

PAGE 9, TYPE VIII ADD "STYLE 4" SAME LINE

NEXT COLUMN ADD "AF Grey 1640, SAME LINE

NEXT COLUMN ADD "DARK BLUE 67126."

PAGE 10, ADD NOTE 4/ MARS GREEN 9129 MAY BE

AVAILABLE AT ROBISON ANTON CORPORATION.

PAGE 11, TYPE VIII ADD "STYLE 4" SAME LINE

NEXT COLUMN ADD "AF Grey 1640, SAME LINE LAST

COLUMN ADD "5484 LIGHT MOSS."

PAGE 15, PARA. 4.1 A. FIRST ARTICLE

INSPECTION. AT THE END OF PARA. ADD

"THE FIRST ARTICLE INSPECTION SHALL

CONSIST OF VISUAL EXAMINATION OF

END ITEM, EXAMINATION FOR DIMENSIONS

AND END ITEM TESTING."

PARA. 4.1 B. CONFORMANCE INSPECTION. AT THE

END OF PARA. ADD THE FOLLOWING: "THE CONFORMANCE

INSPECTION SHALL CONSIST OF VISUAL EXAMINATION

OF END ITEM AND EXAMINATION FOR DIMENSIONS."

PAGE 16, PARA 4.3.1 TESTING OF COMPONENTS. AT

END OF PARA. ADD THE FOLLOWING: " AS PER

CONTRACT, THE SAMPLE SIZE SHALL BE THREE UNITS

FOR EACH TEST CHARACTERISTIC OF EACH COMPONENT.

THE LOT SHALL BE UNACCEPTABLE IF ONE OR MORE

UNITS FAIL TO MEET THE REQUIREMENTS

IN TABLE III."

PAGE 17,PARA. 4.3.2 VISUAL EXAMINATION.

AT THE END OF PARA ADD THE FOLLOWING:

"DEFECTS SHALL BE EXPRESSED IN DEFECTS

PER HUNDRED UNITS. THE INSPECTION LEVEL

SHALL BE II. THE ACCEPTABLE QUALITY LEVEL

SHALL BE .40 FOR MAJOR AND 1.0 FOR MAJOR

AND MINOR DEFECTS COMBINED."

PAGE 19, PARA. 4.3.3 EXAMINATION FOR

DIMENSIONS. AT THE END OF PARA<(>,<)>

ADD THE FOLLOWING: "THE DEFECTS SHALL BE

EXPRESSED IN DEFECTS PER HUNDRED UNITS.

THE INSPECTION LEVEL SHALL BE S3. THE

ACCEPTABLE QUALITY LEVEL SHALL BE 1.5 FOR

MAJOR DEFECTS. THE FIRST ARTICLE WILL BE

REJECTED IF THE END ITEM HAVE ANY MAJOR

DEFECTS."

PAGE 20,PARA., 4.3.4 END ITEM TESTING. AT THE

END OF THE PARA, ADD THE FOLLOWING: "AS PER THE

CONTRACT, THE SAMPLE SIZE SHALL BE 24 INSIGNIA

OR ONE STRIP FOR INSIGNIA FURNISHED IN STRIPS.

THE LOT SHALL BE UNACCEPTABLE IF ONE OR MORE

UNITS FAIL TO MEET THE REQUIREMENTS IN TABLE V"

PARAGRAPH 6.3 SAMPLES, DELETE IN ITS

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

ENTIRETY.

PAGE 21 PARA. 6.6 SUGGESTED UNIT PACKAGING.

AT THE END OF PARA, ADD THE FOLLOWING: "

THE SUGGESTED BUNDLE QUANTITY SHALL BE

PLACED INTO A POLYETHYLENE BAG AND HEAT

SEALED OR TAPE CLOSED. THE BUNDLE SHALL

BE MARKED IN ACCORDANCE WITH MIL-STD-129.

PAGE 21, PARAGRAPHS 6.6.2, 6.6.3 AND 6.6.4 AT

THE END OF THESE PARAGRAPHS ADD: "FOR INSIGNIAS

WITH A HOOK FASTENER TAPE BACKING, THE INSIGNIAS

SHALL BE PUT UP IN BUNDLES OF TWENTY EACH.".

PAGE 22, ADD NEW PARAGRAPH: "6.6.6.1 PACKAGING.

PACKAGING SHALL BE IN ACCORDANCE WITH

ASTM D 3951 WITH THE FOLLOWING EXCEPTIONS:

A TOTAL OF EIGHT (8) INTERMEDIATE PACKS OF ONE

TYPE, STYLE AND CLASS FOR A TOTAL OF 160

INSIGNIAS SHALL BE PACKED IN A SNUG FITTING

INTERMEDIATE CONTAINER.

PAGE 22, PARAGRAPH 6.6.6.2 PACKING. TEN (10)

INTERMEDIATE BOXES (160 EACH) SHALL BE

PLACED IN A FIBERBOARD CONTAINER FOR A TOTAL OF

SIXTEEN HUNDRED (1600) INSIGNIAS.

PAGE 12, ADD NEW PARAGRAPH; "3.3.8 FASTENER

TAPE, HOOK. THE HOOK TAPE SHALL CONFORM TO TYPE

II, CLASS 1 OF A-A-55126, OR YKK SA200(ACU)

POWERHOOK OR VELCRO HTH 841 EXTRUDED HOOK, OR

SIMILAR BRAND OFFERING A MINIMUM OF 1 LB PEEL/

INCH WIDTH AND 30 LB/SQUARE INCH SHEAR STRENGTH.

NO SLIT OR SPLIT EDGES ARE PERMITTED. SEW ALL

HOOK AND LOOP A MINIMUM OF 1/8 INCH FROM BOUND

SELVAGE TO PREVENT NEEDLE CUTTING ALONG EDGES.

TO PREVENT RAVELING, DO NOT SEW DIRECTLY ON

SELVAGE. HOWEVER, EACH REQUIRED WIDTH SHALL

MAINTAIN A TOLERANCE OF PLUS 1/32 INCH OR MINUS

1/32 INCH AS TO PREVENT STITCHING RUNOFFS OR

IMPROPER FIT INTO AUTOMATIC SEWING EQUIPMENT.

3.3.8.2 - STITCHING SHALL BE CONTINUOUS. NO

BROKEN, LOOSE, MISSING, INCOMPLETE STITCHING OR

RUN-OFF ARE ALLOWED. IF THE STITCHING IS

INTERRUPTED, BACKSTITCHING OF A MINIMUM OF 3

STITCHES SHALL BE ACCEPTABLE."

PAGE 19, TABLE IV. VISUAL EXAMINATION OF THE END

ITEM, ADD NEW EXAMINATIONS AT THE END OF TABLE.

EXAMINE DEFECT MAJOR / MINOR

"TAPE HOOK TAPE HAS SPLIT X

. AND/OR SPLIT EDGES.

STITCHES BROKEN, LOOSE OR X

. MISSING.

. STITCHES NOT BACK- X

. STITCHED A MINIMUM

. OF 3 STITCHES.

. RUN-OFFS. X

THREAD THREAD IS NOT A X

. GOOD MATCH TO THE

. INSIGNIA CLOTH."

...................POINT OF CONTACT

FOR SHADE SAMPLE AND APPROVAL IS MELANIE KING<(>,<)>

NATICK SOLDIERS CENTER, KANSAS STREET, NATICK<(>,<)>

SA 01760-5019, TELEPHONE 508-233-5468."

PAGE 2, UNDER TYPE IV ADD *STYLE 6 @ ACU)

PAGE 2, UNDER TYPE V ADD *STYLE 5 @ ACU)

PAGE 4, UNDER TYPE IX ADD *STYLE 6 @ ACU)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PAGE 4, UNDER TYPE X ADD *STYLE 5 @ ACU)

PAGE 4, UNDER TYPE XI ADD *STYLE 3 @ ACU)

PAGE 11, ADD THE FOLLOWING NEW INFORMATION

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

(ref. T1481)

MIL-DTL-44436 CLOTH, CAMOUFLAGE PATTERN,

. WIND RESISTANT POPLIN,

. NYLON/COTTON BLEND,

. 04 April 2012.

Class 8 Standard sample for Cloth, Universal Camouflage Pattern, wind resistant poplin, nylon/cotton blend, conforming to class 8 (wrinkle free) of MIL-DTL-44436 is available on roll no. 3877 and is applicable for Shade, Appearance, Colorfastness and IR Spectral Reflectance. This standard shall apply before and after permethrin treatment, when applicable.

SHADE:DESERT SAND SHADE:URBAN GRAY SHADE:FOLIAGE GREEN SHADE

DECMC 500,,,,,,DECMC 501,,,, DECMC 502 DECMC

DL* 63.87,,,,,,DL* 51.22 DL* 42.45 DL*

Da* 2.81 Da* -0.51 Da* -1.82 Da* Db* 11.61 Db* 6.41 Db* 3.49 Db*

DATE: FEB.2005 CERTIFIED BY MELANIE A. KING

CIELAB readings are provided as an informational tool only. The readings provided were taken using American Association Of Textile Chemists and Colorists (AATCC) Evaluation Procedure 6,(D65 /10 degree) unless a smaller aperture is needed for digital prints. It is recommended that suppliers take a reading of the standard shade sample provided by DLA Troop Support with their own Spectrophotometer. Due to different equipment models, different equipment condition, software, and calibration of equipment, readings taken by the ESA may differ from contractor readings, these readings are only one piece of information and are provided for information purposes only. Matching CIELAB readings as provided may or may not produce an acceptable match to the shade standard provided by DLA Troop Support. The CIELAB readings will not be used for shade acceptance evaluation. All shade acceptance evaluation will be based on Government visual shade evaluations only.

12/17/08

Class 11 Standard sample for Cloth, Operational Camouflage Pattern, wind resistant poplin, nylon/cotton blend, conforming to class 11 (wrinkle free) of MIL-DTL-44436 is available on roll no. 3900 and is applicable for Shade, Appearance, Colorfastness and IR Spectral Reflectance. This standard shall apply before and after permethrin treatment, when applicable.

Class 14 Standard sample for Cloth, Operational Enduring Freedom Camouflage Pattern, wind resistant poplin, nylon/cotton blend, conforming to class 11 (wrinkle free) of MIL-DTL-44436 is available on roll no. 3886 and is applicable for Shade, Appearance, Colorfastness and IR Spectral Reflectance. This standard shall apply before and after permethrin treatment, when applicable.

CHANGES TO MIL-DTL-44436B:

Page 17, TABLE X, Dimensional Stability, under "After 5 launderings" add "After 1 laundering".

INTERIM SPECIFICATION CHANGES TO MIL-DTL-44436B, APPLICABLE TO THIS

CONTRACT ONLY:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

Paragraph 1.2 Classification.

-,,Delete all previous names or name changes to Class 9 and replace with "Operation Enduring Freedom Camouflage Pattern (OEF-CP) (see 6.4.1)."

-,,Delete all previous names or name changes to Class 10 and replace with "Operation Enduring Freedom Camouflage Pattern (OEF-CP) Water Repellent Treated (Quarpel Type) (see 6.4.1)."

-,,Delete all previous names or name changes to Class 11 and replace with "Operation Enduring Freedom Camouflage Pattern (OEF-CP) - Wrinkle Free Finish" -,,Add "Class 12 - Operational Camouflage Pattern (OCP)" -,,Add "Class 13 - Operational Camouflage Pattern (OCP) - Water Repellent Treated (Quarpel Type) (see 6.4.1)."

-,,Add "Class 14 - Operational Camouflage Pattern (OCP) - Wrinkle Free Finish"

Comment Block:

Delete the hyperlink "https://assist.daps.dla.mil/" and replace with "https://assist.dla.mil/."

Paragraph 2.2.1 Specifications. standards, and handbooks.

Delete hyperlink " https://assist.daps.dla.mil/quicksearch/" and replace with "https://assist.dla.mil/"

Paragraph 2.2.2 Other Government documents, drawings, and publications.

Delete office "ATTN: RDNS-WPW-C" and replace with "ATTN: RDNS-SEW-EWC"

Paragraph 2.3 Non-Government publications.

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)

Delete "AATCC Test Method - 16 Colorfastness to Light" and replace with the following:

"AATCC Test Method - 16.2 Colorfastness to Light: Carbon Arc AATCC Test Method - 16.3 Colorfastness to Light: Xenon"

OTHER PUBLICATIONS

After Sears Roebuck and Co., Sears Fabric Defect Replica Scales

Delete: "(Copies available from Sears Roebuck and Co., "Fabric Defect Replica Kit" Dept 817 (ATTN: FC 554B), 3333 Beverly Road, HG, FC568B, Hoffman Estates, IL 60179. For information call (847-286-8952.)" and replace with the following:

"(Copies available from Sears Roebuck and Co., "Fabric Defect Replica Kit" at SHGS Hong Kong Textile Testing Laboratory, 49/F, Office Tower, Langham Place, 8 Argyle Street, Mongkok, Kowloon, Hong Kong)."

Paragraph 3.5.1.4 Delete title of the paragraph in its entirety And replace with "Class 9, 10 and 11, Operation Enduring Freedom Camouflage Pattern (OEF-CP)."

Add Paragraph 3.5.1.5:

"3.5.1.5 Class 12, 13 and 14 Operational Camouflage Pattern (OCP). The cloth(s) shall be dyed to a ground shade either matching or approximating Dark Cream 559 and then shall be overprinted with the camouflage pattern by roller or screen printing. When the ground shade is dyed to match Dark Cream 559, the remaining colors shall be obtained by subsequent printing using six rollers or screens, as appropriate for the Tan 525, Light Sage 560, Olive 527, Dark Green 528, Brown 529 and Bark Brown 561areas of the pattern. When the ground shade is dyed to approximate Dark Cream 559 all seven colors of the camouflage pattern

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

shall be obtained by subsequent printing using seven rollers or screens to match all seven colors. Resin bonded pigments shall not be used."

Paragraph 3.5.4 TABLE IA. Delete Title of TABLE IA in its entirety and replace with the following:

"TABLE IA. Colorfastness requirements (Class 9, 10, 11, 12, 13 and 14)"

Paragraph 3.5.4 TABLE IA. Row 3 - after "Dark Brown 530" Add "Bark Brown 561"

Paragraph 3.5.4 TABLE IA. Row 4 -after "Olive 527" Add "Dark Cream 559 and Light Sage 560"

Paragraph 3.6 Delete Title of the paragraph in its entirety and Replace with the following:

"Pattern execution (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)."

Paragraph 3.6 Line 6 after "direction." Delete "The pattern repeat of Classes 9 and 10 shall be 25.255 (+1.25, -2.50) inches in the warp direction." And replace with the following:

"The pattern repeat of Classes 9, 10, 11 12, 13 and 14 shall be 25.255 (+1.25, -2.50) inches in the warp direction."

Paragraph 3.6, Line 13 after "2-1-2519" Add the following:

"and Classes 12, 13 and 14 shall match that of drawing 2-1-2592 (see 2.2.2, 6.2 and 6.4)."

Paragraph 3.7.5 Delete the title and paragraph in its entirety and replace with the following:

"Class 9, 10 and 11, Operation Enduring Freedom Camouflage Pattern (OEF-CP). The reflectance values for Class 9, Class 10 and Class 11 cloth(s) shall conform to the requirements listed in Table VI, when tested as specified in 4.4.4."

TABLE VI. Delete "TABLE VI. and all values in its entirety and replace with:

"TABLE VI Spectral reflectance requirements, Class 9, 10 and 11

Wavelength, (nm) Cream 524 - Pale Green 526, Olive - Dark Green 528 and & Tan 525 - 527 and Brown 529 - Dark Brown

Min. Max. ,, Min. Max. ,, Min. Max.

600 22 44 ,, 12 30 ,, 3 11 620 24 45 ,, 12 30 ,, 3 12 640 24 45 ,, 12 32 ,, 4 13 660 25 45 ,, 12 32 ,, 4 14 680 28 45 ,, 14 34 ,, 4 17 700 28 48 ,, 14 36 ,, 6 23 720 30 52 ,, 16 39 ,, 6 23 740 32 55 ,, 18 41 ,, 10 25 760 36 56 ,, 20 43 ,, 14 30 780 38 57 ,, 22 45 ,, 18 35 800 40 57 ,, 22 45 ,, 21 40 820 44 58 ,, 24 46 ,, 24 42 840 46 59 ,, 26 47 ,, 26 43 860 48 60 ,, 28 48 ,, 28 45"

Add New Paragraph 3.7.6.

"3.7.6 Class 12, 13 and 14 Operational Camouflage Pattern (OCP). The

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

reflectance values for Class 12, Class 13 and Class 14 cloth(s) shall conform to the requirements listed in Table VI.A, when tested as specified in 4.4.4."

Add New TABLE VI.A. "TABLE VI.A Spectral Reflectance requirements Classes 12, 13 and 14 Wavelength, (nm) Dark Cream 559 - Light Sage 560, Olive - Dark Green 528 and & Tan 525 - 527 and Brown 529 - Bark Brown 561

Min. Max. ,, Min. Max. ,, Min. Max.

600 22 44 ,, 12 30 ,, 3 11 620 24 45 ,, 12 30 ,, 3 12 640 24 45 ,, 12 32 ,, 4 13 660 25 45 ,, 12 32 ,, 4 14 680 28 45 ,, 14 34 ,, 4 17 700 28 48 ,, 14 36 ,, 6 23 720 30 52 ,, 16 39 ,, 6 23 740 32 55 ,, 18 41 ,, 10 25 760 36 56 ,, 20 43 ,, 14 30 780 38 57 ,, 22 45 ,, 18 35 800 40 57 ,, 22 45 ,, 21 40 820 44 58 ,, 24 46 ,, 24 42 840 46 59 ,, 26 47 ,, 26 43 860 48 60 ,, 28 48 ,, 28 45"

Paragraph 3.8 TABLE VII. Physical requirements Delete Row 1 in its entirety and replace with the following :

Characteristic ,,Class ,, Class ,, Class ,,,,1, 3, 5, 6, 9 &12 ,,2, 7, 10 & 13 ,, 8 ,11 &14

Paragraph 3.8.1 Weave. Line three (3) delete miss spelled word "forth" and replace with "fourth"

Paragraph 3.9 Finish. Delete all after the word "printed" on line two

(2) in their entirety and replace with the following:

"The Class 2, 7, 10 and 13 cloth(s) shall be given a water repellent treatment as specified in 3.9.1. The Class 8, 11 and 14 cloth(s) shall be given a wrinkle free finish as specified in 3.9.2."

Paragraph 3.9.1 Delete the paragraph in its entirety and replace with the following:

"3.9.1 Water repellency (Class 2, 7, 10 and 13). The Class 2, 7, 10 & 13 cloth(s) shall be given a fluorocarbon (Quarpel Type) water repellent treatment and meet the requirements of Table VIII when tested as specified in 4.4.4."

"TABLE VIII. Delete Title of the Table in its entirety and replace with the following:

"TABLE VIII. Water repellency (Class 2, 7, 10 and 13)"

Paragraph 3.9.2 Delete the paragraph in its entirety and replace with the following:

"3.9.2 Wrinkle free finish (Classes 8, 11 and 14). The Class 8, Class 11 and Class 14 cloth(s) shall be given a wrinkle free finish treatment to match the "hand" crispness, fabric appearance and smoothness of the guide sample provided."

Paragraph 3.11 Resistance to organic liquid. Delete paragraph in its entirety and Replace with the following:

"3.11 Resistance to organic liquid. The Class 2, 7, 10 and 13 finished

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

cloth(s) shall show no wetting by n-tetradecane, initially and after 15 launderings when tested as specified in 4.4.4."

Paragraph 4.3 Conformance inspection. Delete line 2 after "applicable."

And replace with the following "Sampling for Classes 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 shall be in accordance with 4.4.2"

Paragraph 4.4 Yard by yard examination. Line 1 Delete line in its entirety and replace with the following:

"Each roll for Class 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 in the sample shall be examined yard by yard on the printed side only"

TABLE IX Defects.

Delete Row 5 in its entirety and replace with:

"Pattern design not equal to the standard sample (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 6 in its entirety and replace with:

"Incorrect color in any part of the pattern (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 7 in its entirety and replace with:

"Pattern repeat not equal to the standard sample (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 11 in its entirety and replace with:

"Pattern repeat less than 22.755 inches or more than 26.505 inches (Classes 9, 10, 11, 12, 13 and 14)"

Delete Row 12 in its entirety and replace with:

"Skitteriness (mottled, uneven color) of pattern exceeds that shown by the standard sample (Class 1, 2, 3, 6, 7, 8, 9, 10, 11, 12, 13 and 14)"

Delete Row 16 in its entirety and replace with:

"Overall application of water repellent not uniform (Classes 2, 7, 10 and 13)"

Delete Row 17 in its entirety and replace with:

"Tackiness (sticky to touch) (Classes 2, 7, 10 and 13)"

Paragraph 4.4.2 Shade and appearance examination. Line 4 after "lot."

Delete "The shade and appearance examination sampling procedure for Classes 1-3 and 5-10 shall be followed as written below unless otherwise stated in the contract or solicitation."

And replace with the following:

"The shade and appearance examination sampling procedure for Classes 1-3 and 5-14 shall be followed as written below unless otherwise stated in the contract or solicitation."

TABLE X. End item tests - Continued Row for Colorfastness, Column 3 (test), Row for Light Delete "AATCC-16 Opt 1 or 3" and replace with "AATCC 16.2 or 16.3"

Row for Spectral reflectance, Column 1 (Characteristic), Add the following lines after "Class 6, 7 and 8" Class 9, 10 and 11,,,,3.75,,,,4.5.3 Class 12, 13 and 14,,,,3.7.6,,,,4.5.3

Row for Fabric Appearance/Smoothness: Column 1 (Characteristic), Delete

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

"(Class 8)" and replace with "(Class 8, 11 and 14)"

Row for Water repellent treatment, Column 1 (Characteristic), Delete "(Class 2, 7 and 10)" and replace with "(Class 2, 7, 10 and 13)"

Row for Resistance to organic liquids, Column 1 (Characteristic), Delete "(Class 2, 7 and 10)" and replace with "(Class 2, 7, 10 and 13)"

TABLE X. End item tests. Footnote 9/, Line 4: After "ASTM D" Delete "6183" and replace with "6193"

Paragraph 4.5.2.1 Delete Paragraph in its entirety and replace with the following:

"4.5.2.1 Operation Enduring Freedom Camouflage pattern (OEF-CP) (Class 9, 10, and 11). All colorfastness testing for Operation Enduring Freedom Camouflage pattern (OEF-CP) (Class 9, 10 and 11) shall be performed on the solid color area and not the tonal area."

Add New Paragraph "4.5.2.2 Operational Camouflage Pattern (OCP) (Class 12, 13 and 14). All Colorfastness testing for Operational Camouflage Pattern (OCP) (Class 12, 13 and 14) shall be performed on the solid color area and not the tonal area."

Paragraph 4.5.3 Spectral reflectance test.

Line 1 Delete 1st sentence in its entirety and replace the following:

"Spectral reflectance data shall be obtained from 600 to 860 nanometers

(nm) for Classes 1, 2, 5, 6, 7, 8, 9 10, 11, 12, 13 and 14, and 700 to 860 nanometers (nm) for Class 3 at 20 nm intervals on a spectrophotometer relative to the barium sulfate standard, the preferred white standard."

Line 16 After "standard." Delete "The cloth for Classes 6, 7, 8, 9 and 10 shall be measured as a single layer backed with four layers of the same shade." And replace with the following:

"The cloth for Classes 6, 7, 8, 9, 10, 11, 12, 13 and 14 shall be measured as a single layer backed with four layers of the same shade."

Line 22 after "nanometers." Delete "The diameter for standard aperture size used in the color measurement device shall be 1.0 to 1.25 inches for Classes 1, 2, 3 and 5, and 0.3725 inches or larger for the Classes 6, 7, 8, 9 and 10." And replace with the following:

"The diameter for standard aperture size used in the color measurement device shall be 1.0 to 1.25 inches for Classes 1, 2, 3 and 5, and 0.3725 inches or larger for the Classes 6, 7, 8, 9, 10. 11, 12, 13 and 14."

Paragraph 6.1 Intended use. Delete Paragraph in its entirety and replace with the following:

"6.1 Intended use. The cloth is intended for use in Classes 1, 2, 3, 5, 6, 7, 8, 9, 10 11, 12, 13 and 14 camouflage pattern or solid colored (Black) clothing which are wind resistant, and depending on the Class are water repellent and wrinkle free."

Paragraph 6.4.1 Delete in its entirety and replace with the following:

"6.4.1 Operation Enduring Freedom Camouflage Pattern (OEF-CP). For information on obtaining Operation Enduring Freedom Camouflage Pattern (OEF-CP) approved screens address the contracting activity issuing the invitation for bids or request for proposal".

Paragraph 6.8 Subject Term (keyword) listing.

After "Operation Enduring Freedom" add "Camouflage Pattern (OEF-CP)" Delete "OCP" and replace with "Operational Camouflage Pattern (OCP)"

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

NOTE: Delete the hyperlink https://assist.daps.dla.mil/. And replace with "https://assist.dla.mil/.

THE FOLLOWING ADDITIONAL CHANGES ARE APPLICABLE

TO THIS MILITARY DOCUMENT FOR THE PURPOSE

OF INCORPORATING THE UNIVERSAL CAMOUFLAGE

PATTERN:

1. IN APPLICABLE DOCUMENTS SECTION, SECTION 2,

ADD THE FOLLOWING DRAWINGS:

DRAWINGS

U.S. ARMY SOLDIER SYSTEMS CENTER

2-1-2519 - UNIVERSAL CAMOUFLAGE PATTERN,

60-INCHES

2-1-2519-1 - ARPAT CAMOUFLAGE PATTERN DESERT

SAND 500

2-1-2519-2 - ARPAT CAMOUFLAGE PATTERN URBAN

GRAY 501

2-1-2519-3 - ARPAT CAMOUFLAGE PATTERN FOLIAGE

GREEN 502

(COPIES OF DRAWINGS ARE AVAILABLE FROM THE

U.S. ARMY NATICK SOLDIER CENTER, ATTN:

AMSRD-NSC-IP-E, NATICK, MA 01760-5019.)

2. IN SECTION 3, ADD THE FOLLOWING REQUIREMENTS:

COLOR. THE COLOR SHALL BE THE UNIVERSAL

PATTERN. THE CLOTH SHALL BE DYED TO A

GROUND SHADE EITHER MATCHING OR APPROXIMATING

DESERT SAND 500 AND THEN OVERPRINTED WITH

THE CAMOUFLAGE PATTERN BY ROLLER OR SCREEN

PRINTING. WHEN THE GROUND SHADE IS DYED TO MATCH

DESERT SAND 500, THE REMAINING COLORS SHALL BE

OBTAINED BY SUBSEQUENT PRINTING USING TWO

ROLLERS OR ROTARY SCREENS AS APPROPRIATE FOR

THE URBAN GRAY 501 AND FOLIAGE GREEN 502

AREAS OF THE PATTERN. WHEN THE GROUND SHADE

IS DYED TO APPROXIMATE DESERT SAND 500,

ALL THREE COLORS OF THE CAMOUFLAGE PATTERN

SHALL BE OBTAINED BY SUBSEQUENT PRINTING USING

THREE ROLLERS OR ROTARY SCREENS TO MATCH ALL

THREE COLORS. RESIN BONDED PIGMENTS ARE NOT

PERMITTED.

COLORFASTNESS. THE UNIVERSAL CAMOUFLAGE PRINTED

FINISHED CLOTH SHALL SHOW FASTNESS TO LAUNDERING

(AFTER 3 CYCLES), LIGHT (AFTER 40 STANDARD

FADING HOURS OR 170 KILOJOULES), AND PERSPIRA-

TION EQUAL TO OR BETTER THAN THE STANDARD SAMPLE

OR EQUAL TO OR BETTER THAN A RATING OF

GOOD) OR 3-4 OF THE AATCC GRAY SCALE FOR COLOR

CHANGE AND COLOR TRANSFER FOR EACH OF THE

PATTERN AREAS, EXCEPT FASTNESS TO LIGHT SHALL BE

EQUAL TO OR BETTER THAN A RATING OF 3 FOR COLOR

CHANGE. THE FINISHED CLOTH SHALL SHOW FASTNESS

TO CROCKING EQUAL TO OR BETTER THAN THE STANDARD

SAMPLE OR SHALL HAVE AN AATCC CHROMATIC TRANS-

FERENCE SCALE RATING OF NOT LOWER THAN 3.5 FOR

ALL THE PATTERN AREAS. TESTING SHALL BE AS

SPECIFIED IN SECTION 4 OF THIS DOCUMENT.

PATTERN EXECUTION. THE PATTERN ON THE FINISHED

CLOTH SHALL MATCH THE STANDARD SAMPLE WITH RE-

SPECT TO DESIGN, COLORS AND REGISTRATION OF THE

RESPECTIVE AREAS. EACH PATTERN AREA SHALL SHOW

SOLID COVERAGE. SKITTERINESS EXCEEDING THAT

SHOWN BY THE STANDARD SAMPLE WILL

NOT BE ACCEPTABLE.

THE WARPWISE PATTERN REPEAT OF THE FINISHED

CLOTH SHALL BE 36 +1.25 -2.50 INCHES. WHEN THE

STANDARD SAMPLE IS NOT REFERENCED FOR PATTERN

EXECUTION, A PATTERN DRAWING SHALL BE PROVIDED

AND SHALL MATCH THAT OF DRAWING 2-1-2519

(SEE DRAWINGS & SEE ACQUISITION REQUIREMENTS).

SPECTRAL REFLECTANCE UNIVERSAL CAMOUFLAGE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

PATTERN. THE SPECTRAL REFLECTANCE VALUES FOR

EACH COLOR IN THE UNIVERSAL CAMOUFLAGE PRINTED

CLOTH SHALL CONFORM TO THE REQUIREMENTS

SPECIFIED IN TABLE IV WHEN TESTED AS

SPECIFIED IN SECTION 4 OF THIS DOCUMENT.

SPECTRAL REFLECTANCE TABLE FOR UNIVERSAL CAMOU-

FLAGE PATTERN.

SPECTRAL REFLECTANCE REQUIREMENTS

REFLECTANCE VALUES (PERCENT)

WAVELENGTH, DESERT URBAN FOLIAGE

NANOMETERS(NM) SAND 500 GRAY 501 GREEN 502

--------MIN.MAX. MIN.MAX. MIN.MAX.

600----------- 28 40 12 26 8 18 620----------- 30 42 14 26 8 18 640----------- 34 48 14 28 8 20 660----------- 38 56 14 30 10 26 680-------------44 60 18 34 10 26 700-------------46 66 24 38 12 28 720------------ 48 68 26 42 16 30 740-------------48 72 30 46 16 30 760-------------50 74 32 48 18 32 780-------------54 76 34 48 18 34 800-------------54 76 34 50 20 36 820-------------54 76 36 54 22 38 840-------------56 78 38 54 24 40 860-------------56 78 40 56 26 42

IN ACQUISITION REQUIREMENTS SECTION ADD:

UNIVERSAL CAMOUFLAGE PATTERN DRAWINGS

IF REQUIRED (SEE PATTERN EXECUTION ABOVE).

ADDITIONAL INFORMATION FOR CCC-C-461:

INTERIM CHANGES TO CCC-C-461C, AM. 1:

PAGE 1, PARA 2.1, ADD THE FOLLOWING NEW TYPE TO

THE TABLE:

TYPE NOMINAL WEIGHT YARN PLY YARN

. OZ. PER SQ. YD. WARP-FILLING

"TYPE VII" "7.6" "1X1" "COMBED"

PAGE 3, ADD NEW PARAGRAPH:

"2.1.1 NON-GOVERNMENT PUBLICATIONS. THE FOLLOW-

ING DOCUMENTS FORM A PART OF THIS DOCUMENT TO

THE EXTENT SPECIFIED HEREIN. UNLESS OTHERWISE

SPECIFIED, THE ISSUES OF THE DOCUMENTS WHICH

ARE DOD ADOPTED ARE THOSE LISTED IN THE ISSUE

OF THE DODISS CITED IN THE SOLICITATION.

UNLESS OTHERWISE SPECIFIED, THE ISSUES OF DOC-

UMENTS NOT LISTED IN THE DODISS ARE THE ISSUES

OF THE DOCUMENTS CITED IN THE SOLICITATION

(SEE 6.2)

AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND

COLORISTS

AATCC-8 COLORFASTNESS TO CROCKING: AATCC

. CROCKMETER METHOD

AATCC-15 COLORFASTNESS TO PERSPIRATION

AATCC-16 COLORFASTNESS TO LIGHT

AATCC-20 FIBER ANALYSIS: QUALITATIVE

AATCC-20A FIBER ANALYSIS: QUANTITATIVE

AATCC-61 COLORFASTNESS TO LAUNDERING, HOME

. AND COMMERCIAL: ACCELERATED

AATCC-81 PH OF THE WATER-EXTRACT FROM

. BLEACHED TEXTILES

AATCC-96 DIMENSIONAL CHANGES IN COMMERCIAL

. LAUNDERING OF WOVEN AND KNITTED

. FABRIC EXCEPT WOOL

(COPIES OF THESE DOCUMENTS ARE AVAILABLE ONLINE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

AT HTTP://WWW.AATCC.ORG OR FROM THE AATCC

NATIONAL HEADQUARTERS, P.O. BOX 12215,

RESEARCH TRIANGLE PARK, NC 27709-2215.)

ASTM INTERNATIONAL

ASTM-D-276 IDENTIFICATION OF FIBERS IN

. TEXTILES

ASTM-D-629 QUANTITATIVE ANALYSIS OF TEXTILES

ASTM-D-1683 FAILURE IN SEWN SEAMS OF WOVEN

. FABRICS

ASTM-D-2165 PH OF AQUEOUS EXTRACTS OF WOOL AND

. SIMILAR ANIMAL FIBERS

ASTM-D-3775 FABRIC COUNT OF WOVEN FABRIC

ASTM-D-3776 MASS PER UNIT AREA (WEIGHT) OF

. FABRIC

ASTM-D-5034 BREAKING FORCE AND ELONGATION OF

. TEXTILE FABRICS (GRAB METHOD)

(COPIES OF THESE DOCUMENTS ARE AVAILABLE ONLINE

AT HTTP://WWW.ASTM.ORG OR AT ASTM INTERNATIONAL,

100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA

19428-2959.)"

PAGE 4, TABLE I, AT END OF TABLE ADD:

TYPE-"VII", YARN-"COMBED", YARN PLY WARP FILL-

"1" "1", WEIGHT OZ. PER SQ. YD (MIN)(MAX)-

"7.2" "8.0", YARNS PER INCH (MINIMUM) WARP

FILL - "100" "54", BREAKING STRENGTH POUNDS

(MINIMUM) WARP FILL-"120" "90", WEAVE-"3/1

TWILL TO LEFT"

PAGE 5, PARA 3.3.2, LINE 7, DELETE "FAIR" AND

SUBSTITUTE "NOT LESS THAN "3" WHEN QUANTIFIED

USING AATCC GRAY SCAL FOR COLOR CHANGE AND."

PARA 3.3.4.1, LINE 5, DELETE "GOOD" AND SUBSTI-

TUTE "NOT LESS THAN "3.5" WHEN QUANTIFIED USING

AATCC GRAY SCALE FOR COLOR CHANGE".

LINE 6, DELETE "AND NO MORE CROCKING THAN

MUNSELL VALUE 8.5" AND SUBSTITUTE "AND

CROCKING".

PAGE 6, PARA 3.7, LINES 2-3, AFTER "FILLING

DIRECTION OF THE CLOTH, ADD: "FOR TYPES I-VI AND

NO MORE THAN 3 PERCENT IN THE WARP AND 3 PERCENT

IN THE FILLING FOR TYPE VII,".

JUSTIFICATION: A NEW TYPE IS NEEDED FOR USE IN

THE CONSTRUCTION OF MIL-H-81735.

PAGES 9, 10 AND 11, PARA 4.4, LINE 1, DELETE,

"IN FED. STD. NO. 191, WHEREVER APPLICABLE, AND

AS LISTED".

TABLE II, MAKE THE FOLLOWING CHANGES:

. FOR COTTON IDENTIFICATION, UNDER TEST METHOD,

DELETE "1200", AND SUBSTITUTE "AATCC-20 OR

ASTM-D-276".

. FOR COMBED COTTON, DELETE "(TYPES I, II, III

AND IV)" AND SUBSTITUTE "(TYPES I, II, III, IV

AND VII)".

. FOR DISCOLORATION (BLEACHED), UNDER TEST

METHOD, DELETE "5660", AND SUBSTITUTE "AATCC-

16 OPT A".

. FOR COLORFASTNESS TO LAUNDERING (AFTER 3

CYCLES), UNDER TEST METHOD, DELETE "5610", AND

SUBSTITUTE "AATCC-61 TEST 3A".

. FOR COLORFASTNESS TO PERSPIRATION, UNDER TEST

METHOD, DELETE "5680", AND SUBSTITUTE "AATCC-15"

. FOR COLORFASTNESS TO LIGHT, UNDER TEST METHOD,

DELETE "5660" AND SUBSTITUTE "AATCC-16 OPT A".

. FOR COLORFASTNESS TO CROCKING, UNDER TEST

METHOD, DELETE "5651" AND SUBSTITUTE "AATCC-8".

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

. FOR WEIGHT, UNDER TEST METHOD, DELETE "5041"

AND SUBSTITUTE "ASTM-D-3776, OPTION C".

. FOR YARNS PER INCH, WARP, UNDER TEST METHOD,

DELETE "5050" AND SUBSTITUTE "ASTM-D-3775".

. FOR YARNS PER INC, FILLING, UNDER TEST METHOD,

DELETE "5050" AND SUBSTITUTE "ASTM-D-3775".

. FOR BREAKING STRENGTH, WARP, UNDER TEST METHOD

DELETE "5100" AND SUBSTITUTE "ASTM-D-5034".

. FOR BREAKING STRENGTH, FILLING, UNDER TEST

METHOD, DELETE "5100" AND SUBSTITUTE "ASTM-D-

5034".

. FOR NONFIBROUS MATERIAL CONTENT, UNDER TEST

METHOD, DELETE "2611" AND SUBSTITUTE "AATCC-20A

OR ASTM-D-629".

. FOR SHRINKAGE IN LAUNDERING, WARP, UNDER TEST

METHOD, DELETE "5550" AND SUBSTITUTE "AATCC-96,

TEST VC, D".

. FOR SHRINKAGE IN LAUNDERING, FILLING, UNDER

TEST METHOD, DELETE "5550" AND SUBSTITUTE

"AATCC-96, TEST VC, D".

. FOR SEAM EFFICIENCY, UNDER TEST METHOD, DELETE

"5110" AND SUBSTITUTE "ASTM-D-1683".

. FOR PH, UNDER TEST METHOD, DELETE "2811" AND

SUBSTITUTE "AATCC-81 OR ASTM-D-2165".

. FOOTNOTE 3, LINE 1, DELETE "METHOD 5660" AND

SUBSTITUTE "AATCC-16 OPT A". LINE 5, DELETE

"FAIR" AND SUBSTITUTE "NOT LESS THAN"3"".

LINES 7-8, DELETE ""FAIR" INDICATED IN METHOD

5660" AND SUBSTITUTE "NOT LESS THAN "3"".

UNDER CUSTODIANS, DELETE "NAVY-SA" AND

SUBSTITUTE "NAVY-NU".

UNDER "REVIEW ACTIVITY" ADD "NAVY-AS,MC".

DELETE "UNDER ACTIVITY: NAVY-MC".

(REF T0434).

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND

ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF

THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL

PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,

AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED.

THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN

BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH

THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE

CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION

(INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE."

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE

SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

"THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1,

PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA.

5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER

"TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE

LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500

VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A

PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE

(5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED.

THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE

PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL

DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT

NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE

SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

"REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS

THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS

DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE

MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN

4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER

THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE

INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE

WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY

FOR THE TEST."

(Ref. T0215)

QQ-A-200/10E ALUMINUM ALLOY 6066, BAR, ROD,

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 32 PAGES

CONTINUED ON NEXT PAGE

SECTION B

. SHAPES, TUBE AND WIRE, EXTRUDED

. 9/28/83.

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

,,,,,, - MILITARY MARKING FOR SHIPMENT AND STORAGE

,,,,,, DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C<(>&<)>T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C<(>&<)>T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C<(>&<)>T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST

CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE"

SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

ADDITIONAL INFORMATION FOR A-A-55126: NO ADDITIONAL INFO FOLLOWS.

(ref. T7018 - Sept. 25, 2006)

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

FIVE (5) FIRST ARTICLE SAMPLES ARE REQUIRED. FIRST ARTICLE TESTING SHALL

BE PERFORMED AND THE…