SPE1C118Q0300.PDF

PDF 701 KB Posted Jul 18, 2018

Attached to: CLOTH, LAMINATED Federal contract opportunity
Solicitation number: SPE1C118Q0300
Issued by: Defense Logistics Agency Troop Support Clothing and Textiles

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE1C1-18-Q-0300

2. DATE ISSUED

2018 JUL 18

3. REQUISITION/PURCHASE REQUEST NO.

0075240030

RATING

DO-C9

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: MIOSOTIS GONZALEZ PCPQBA6 Tel: 215-737-8056 Fax: 215-737-2136 Email: MIOSOTIS.GONZALEZ@DLA.MIL

6. DELIVER BY (Date)

90 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 AUG 02

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 65 PAGES

SPE1C1-18-Q-0300

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: PGC: 90115

ITEM DESCRIPTION:

CLOTH,LAMINATED

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

INDIVIDUAL NSN DATA

NSN 8305-00-926-1584; PGC90115

Color: Gray, Color Chip/ID: 26231; both sides, IAW AMS-STD-595A

NSN 8305-00-926-1585; PGC90115

Color: Green, Color Chip/ID: 24108; both sides, IAW AMS-STD-595A

NSN 8305-00-926-1586; PGC90115

Color: White, Color Chip/ID: 27875; both sides, IAW AMS-STD-595A

NSN 8305-00-926-1587; PGC90115

Color: Yellow, Color Chip/ID: 23655; both sides, IAW AMS-STD-595A

ITEM NAME: ,,CLOTH,LAMINATED

PART NUMBER: ,,A-A-55308

CAGE CODE: ,,58536

Shall be in accordance with (IAW) Commercial Item Description (CID)

A-A-55308, CLOTH AND STRIP, LAMINATED OR COATED, VINYL NYLON OR

POLYESTER, HIGH STRENGTH, FLEXIBLE dated 13 May 1997.

Ply Quantity: 3 Width: 50 inches ± 0.5 (1/2) inches;

49.5 inches minimum to 50.5 inches maximum Environmental Protection: Fire resistant, water resistant, and waterproof Cloth Weight:

17.1 ounces per square yard minimum and

19.8 ounces per square yard maximum Fiber material: Polyvinylchloride basic Fiber material document and classification:

FED L-P-375D, Type II FED Spec single material response basic Procurement Group Code (PGC): 90115 Type: ,,I (Heavy Duty) Class: ,,3 (Special laminated construction) Form: ,,1 (Cloth, width as specified) Unit of issue is a YARD (YD).

WHEN REQUIRED, TEST REPORTS AND COMPONENT

CERTIFICATIONS IN ACCORDANCE WITH DPSCM-4155.3

ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS.

SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)>

INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT

BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT

WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP

SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION

TO THE CONTRACT.

RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS

RESPONSIBLE FOR THE PERFORMANCE OF ALL INSPECTION<(>,<)>

EXAMINATION, AND TEST REQUIREMENTS SPECIFIED

HEREIN AND IN THE CITED SPECIFICATIONS AND CONTRACT.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY

OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS

DEEMED NECESSARY TO ENSURE SUPPLIES AND SERVICES

CONFORM TO PRESCRIBED REQUIREMENTS.

ADDITIONAL INFORMATION FOR A-A-55308 dated 13 May 1997:

Pages 4 and 5

5.4, Table II, Footnote 1/, Line 4, at end add "The specimens shall be subjected to 250 continuous cycles of tension of 2 pounds (8.9N) and under a load of 2-pounds (8.9 N).".

Footnote 3/, Line 5, after "150 hours ± 1 hour." insert "As an alternate to Test Method 5804, AATCC Test Method 169, Option 4 may be used, with the following exceptions:

a.The weathering test cycle shall be 40 minutes of light, 20 minutes of light with water spray on the fabric face, 60 minutes of light, 60 minutes of darkness. The test cycle shall be repeated until the total energy exposure is equal to 100 kilojoules per square meter.

b. The irradiance level shall be 0.55 (+0.01,-0.0) watt/square meter/nanometers (w/m²/nm) bandpass at 340 nanometers.

c. The glass filter combination shall be a quarts inner filter and a borosilicate "S" type outer filter.

d. The relative humidity shall be 50 (+5, -0) percent during the light cycle and not lower than 95 percent during the dark cycle.

,,e. The control set points shall be as follows:

,,Dark cycle Light cycle ,,Black panel ,,38°C 77°C ,,Conditioning water 40°C 53°C ,,Wet bulb depression 1/0°C 10°C 1/ As a guide only, adjust to achieve required relative humidity (see d.

above).

f. The test specimens shall fit the specimen rack of the apparatus with no wrinkles or gaps. The test specimen shall be mounted on the outside of the rack with the use of appropriate stainless steel spring clips.

After the required exposure period, the specimens shall be removed from the apparatus and allowed to dry and condition at standard conditions.

Then test specimens for each required test shall be cut and tested appropriately. Note: Monitoring of dry bulb temperature, wet bulb depression, irradiance, and black panel temperature is recommended through the use of chart recorders.".

Footnote 9/, Delete and substitute:

"9/ Flame resistance. Unless otherwise specified, NFPA 701, Test Method 2 shall be used when procuring the following types, classes and forms combinations (see 7.3).

Type I, Class 1, Form 1 Type I, Class 2, Form 1 Type I, Class 2, Form 2 Type I, Class 3, Form 1 Type II, Class 2, Form 1 Type II, Class 3, Form 1

Otherwise Test Method 5903 of FED-STD-191 shall be required. As an alternate to Test Method 5903 ASTM D6413 may be used."

Page 6, After 7.2, add new paragraph.

"7.3 End items by types, classes and forms. Below are the NSNs associated with this document by type, class and form. The NSN may or may not be active.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

8305-00-926-1585,,,,I,, 3,, 1 8305-00-926-1587,,,,I,, 3,, 1 8305-00-926-1586,,,,I,, 3,, 1 8305-00-926-1584,,,,I,, 3,, 1

8305-01-087-8578,,,,II,, 1,, 1

8305-00-351-8346,,,,II,, 2,, 1

8305-00-351-8348,,,,II,, 2,, 1

8305-00-351-8347,,,,II,, 2,, 1

8305-00-351-8345,,,,II,, 2,, 1

8305-00-405-2243,,,,II,, 2,, 1

8305-00-498-4099,,,,II,, 2,, 1

8305-01-177-9212,,,,II,, 2,, 1

8305-01-088-6291,,,,II,, 3,, 1

8305-00-629-8371,,,,III,, 1,, 2

FED-STD-595C, COLORS USED IN GOVERNMENT PROCUREMENT, AND ALL ASSOCIATED

SLASH SHEETS HAVE BEEN CANCELLED (FEBRUARY 14, 2017) AND SUPERSEDED BY

SAE AMS-STD-595.

ADDITIONAL INFORMATION FOR SAE AMS-STD-595:

COPIES OF SAE AMS-STD-595 CAN BE OBTAINED FROM:

WEBSITE: STORE.SAE.ORG/EA/

TELEPHONE: 877-606-7323 (INSIDE USA AND CANADA)

+1 724-776-4970 (OUTSIDE USA)

MAIL: SAE CUSTOMER SERVICE

400 COMMONWEALTH DRIVE

WARRENDALE, PA 15096-0001

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND

ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF

THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL

PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,

AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED.

THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN

BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH

THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE

CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION

(INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE

SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

"THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1,

PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA.

5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER

"TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE

LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500

VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A

PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE

(5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED.

THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE

PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL

DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT

NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE

SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

"REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS

THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS

DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE

MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN

4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER

THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE

INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE

WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY

FOR THE TEST."

(Ref. T0215)

DEPARTMENT OF DEFENSE INDEX OF SPECIFICATIONS AND STANDARDS.

PART I AND II, JULY 2000 AND SUPPLEMENT, MARCH 2000

LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

a. This solicitation/award consists of the following documents, exhibits, and other attachments

b. DSCPM 4155.3, QUALITY SYSTEMS REQUIREMENTS, NOVEMBER 3, 1997.

52.246-15 CERTIFICATE OF CONFORMANCE

REVIEW OF THIS ITEM HAS DETERMINED THAT THE SPECIFICATIONS, STANDARDS,

PRODUCT DESCRIPTIONS OR OTHER TECHNICAL DATA APPLICABLE TO THIS

PROCUREMENT ACTION DO NOT REQUIRE THE USE

OF CLASS I OZONE DEPLETING SUBSTANCES (ODS) OR ODC(S).

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

5/14/2018

IAW BASIC CID A-A-55308

REVISION NR DTD 05/13/1997

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-P-43334C

REVISION NR C DTD 09/30/1986

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-105E NOT 3

REVISION NR E DTD 02/06/2008

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-129R(1)

REVISION NR R DTD 05/24/2018

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-147E(1)

REVISION NR E DTD 12/23/2013

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-1487 NOT 2

REVISION NR DTD 04/14/2006

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-2073-1E(1)

REVISION NR E DTD 01/07/2011

PART PIECE NUMBER:

IAW REFERENCE UNK L-P-375D NOT 1

REVISION NR D DTD 07/08/1999

PART PIECE NUMBER:

IAW REFERENCE UNK PPP-P-1136D NOT 1

REVISION NR D DTD 04/16/2002

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-191A(6) NOT 7

REVISION NR A DTD 08/09/2000

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-595C(1)

REVISION NR C DTD 07/31/2008

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-601(7) NOT 8

REVISION NR DTD 05/10/2013

PART PIECE NUMBER:

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 8305-00-926-1585 2,734.000 YD $ ________________ $ ________________

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 0% MINUS 0%

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:89

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:EZ OPI:O

INTRMDTE CONT:EZ INTRMDTE CONT QTY:000

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

SPECIAL MARKING CODE:34 -34 Manufacturer#s part number

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

INSPECTION AT SOURCE/ACCEPTANCE AT SOURCE

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM

FEDERAL SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY

CANCELLED, AND REPLACED WITH ASTM-D-5118, STANDARD PRACTICE FOR

FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD

PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD

SHIPPING CONTAINERS.

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2

STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

,,,,,, - MILITARY MARKING FOR SHIPMENT AND STORAGE

,,,,,, DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C<(>&<)>T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C<(>&<)>T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C<(>&<)>T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST

CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE"

SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

MIL-STD-147E

w/CHANGE 1 23 December 2013

SUPERSEDING

MIL-STD-147E

16 May 2008

DEPARTMENT OF DEFENSE

STANDARD PRACTICE

PALLETIZED UNIT LOADS

252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required (ref. T8379; Nov. 08, 2006) Packaging examination. The fully packaged end item shall be examined for the defects listed below. The lot size shall be expressed in units of shipping containers. The sample unit shall be one shipping container

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

fully packaged. The Inspection level shall be S-2 and the AQL, expressed in terms of defects per hundred units, shall be 2.5.

Examine Defect

Marking Omitted; incorrect; illegible, of (exterior) improper size, location, sequence & Unit Pack, or method of application.

Materials ,, Any component missing, damaged or not as specified.

Workmanship ,, Inadequate application of components, such as: incomplete closure of container flaps, loose strapping, improper taping, or inadequate stapling. Bulged or distorted container.

Contents ,, Number of intermediate containers per shipping container is more or less than required.

Number of items per container is more or less than required.

Palletization examination. The fully packaged and palletized end items shall be examined for the defects listed below. The lot size shall be expressed in units of palletized unit loads. The sample unit shall be one palletized unit load, fully packaged.

The Inspection level shall be S-1 and the AQL, expressed in terms of defects per hundred units, shall be 6.5.

Finished Length, width or height exceeds Dimensions specified maximum requirement.

Palleti- Pallet pattern not as specified.

zation Interlocking of loads not as specified. Load not bonded with required straps as specified.

Weight Exceeds maximum load limits.

Marking Omitted; incorrect; illegible;

of improper size, location, sequence or method of appli-cation.

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE

FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG

FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE

STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A

SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS

SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER,

CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR CODING ELEMENT SHALL

BE A 13 DIGIT

NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT

CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC"

MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A

MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY

VISIBLE ON THE ITEM WHEN IT IS FOLDED AND PACKAGED AS SPECIFIED. THE

LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED

UNIVERSAL PRODUCT CODE (UPC) MUST BE PLACED ON ALL SHIPPING CARTONS ON

WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII

(PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE

TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

SECTION D - PACKAGING AND MARKING

PREPARATION FOR DELIVERY SHALL BE AS FOLLOWS:

THE PRESERVATION AND PACKAGING SHALL MEET THE

REQUIREMENTS OF MIL-STD-129R, DEPARTMENT OF DEFENSE

STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE,

DATED 18 FEBRUARY 2017 AND MIL-STD-2073-1,

STANDARD PRACTICE FOR MILITARY PACKAGING

FOR SHIPMENTS TO THE DEPARTMENT OF DEFENSE.

PACKAGED COMPONENTS SHALL BE BULK PACKAGED IN A

BOX, TYPE CF, VARIETY SW, CLASS DOMESTIC, GRADE

275 WITH A DOUBLE WALL LINER, MADE TO THE

REQUIREMENTS OF MIL-STD-129R TO INSURE MEETING

THE REQUIREMENTS OF A PACK THAT WILL SUPPORT

RE-TRANSPORT, STORAGE, STACKING, ETC.

A PRESSURE SENSITIVE IDENTIFICATION

LABEL SHALL BE ATTACHED TO EACH PACKAGING BOX

OF THE COMPONENT. THE PACKAGING CONTAINER SHALL

BE SUFFICIENT TO PROVIDE PROTECTION DURING

TRANSPORT AND STORAGE AND ARRIVE AT DESTINATION

IN THE SAME CONDITION AS ORIGIN.

SURFACE OF THE PALLET. WHEN SPECIFIED, COMPONENTS

SHALL BE PALLETIZED ON A FOUR-WAY ENTRY PALLET

IN ACCORDANCE WITH LOAD TYPE I OR IA, AS

APPLICABLE, OF MIL-STD-147E DATED 16 MAY 2008.

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED

COMMERCIAL BONDING MATERIALS. PALLET LOADS SHALL

CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL

QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT

POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL

BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED

IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN.

AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON

PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY.

SAID CARTON SHALL BE CLEARLY MARKED "SHORT"

OR "OVER".

IN ADDITION TO SPECIAL MARKING REQUIRED,

INTERIOR (UNIT) PACKS, INTERMEDIATE CONTAINERS,

SHIPPING CONTAINERS AND PALLETIZED UNIT LOADS

SHALL BE MARKED FOR SHIPMENT, STOWAGE,

AND STORAGE IN ACCORDANCE WITH MIL-STD-129R.

IN ADDITION TO THE REQUIRED DOD BAR CODE MARKING

IN ACCORDANCE WITH MIL-STD-129R, EACH UNIT

CONTAINER, INTERMEDIATE CONTAINER, AND EXTERIOR

CONTAINER SHALL ALSO CONTAIN A NATIONAL STOCK

NUMBER, MANUFACTURE DATE, AND THE LOT NUMBER.

PACKAGING DATA - MIL-STD-2073-1E, 16 MAY 2008.

5/14/2018

PARCEL POST ADDRESS:

UY8615

ARIZONA INDUSTRIES FOR THE BLIND

515 N 51ST AVENUE NUMBER 130 DOCK 1

PHOENIX AZ 85043

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 65 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 90115 CONT'D

FOR TRANSPORTATION ASSISTANCE SEE DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD PROC

NOTE C20 AND

CONTRACT INSTRUCTIONS.

FREIGHT SHIPPING ADDRESS:

UY8615

ARIZONA INDUSTRIES FOR THE BLIND

515 N 51ST AVENUE NUMBER 130 DOCK 1

0002 8305-00-926-1585 2,733.000 YD $ ________________ $ ________________

INSPECTION POINT: ORIGIN

ACCEPTANCE POINT: ORIGIN

FOB: DESTINATION DELIVERY DATE: 90 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:89

WRAP MAT:XX CUSH/DUNN MAT:XX CUSH/DUNN THKNESS:X

UNIT CONT:EZ OPI:O

INTRMDTE CONT:EZ INTRMDTE CONT QTY:000

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:34 -34 Manufacturer#s part number

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

INSPECTION AT SOURCE/ACCEPTANCE AT SOURCE

ADDITIONAL INFORMATION FOR PPP-B-636:

FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM

FEDERAL SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY

CANCELLED, AND REPLACED WITH ASTM-D-5118, STANDARD PRACTICE FOR

FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD

PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD

SHIPPING CONTAINERS.

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2

STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 65 PAGES