SPE1C118Q0153.PDF

PDF 596 KB Posted Feb 8, 2018

Attached to: INSIGNIA, SHOULDER S Federal contract opportunity
Solicitation number: SPE1C118Q0153
Issued by: Defense Logistics Agency Troop Support Clothing and Textiles

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REQUEST FOR QUOTATIONS THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

4. CERT.FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

5. ISSUED BY

7. DELIVERY

9. DESTINATION

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5 ON OR

BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (See Continuation Sheets)

12. DISCOUNT FOR PROMPT PAYMENT

d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

14. SIGNATURE OF PERSON AUTHORIZED TO SIGN

QUOTATION

16. SIGNER

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not useable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

1. REQUEST NO.

SPE1C1-18-Q-0153

2. DATE ISSUED

2018 FEB 08

3. REQUISITION/PURCHASE REQUEST NO.

0071207059

RATING

DO-C9

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

Buyer: Robert Fagan DRF0017 Tel: 215-737-0932 Email: Robert.Fagan@dla.mil

6. DELIVER BY (Date)

150 DAYS ADO

8. TO:

c. CITY

d. STATE

b. STREET ADDRESS

a. NAME OF CONSIGNEE

e. ZIP CODE

a. 10 CALENDAR DAYS

b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS

15. DATE OF QUOTATION

a. NAME (Type or Print)

AREA CODE

c. TITLE (Type or Print)d. CITY

c. COUNTY

b. STREET ADDRESS

e. STATE f. ZIP CODE

See Schedule

2018 FEB 22

NUMBER

FOB DESTINATION

OTHER

(See Schedule)

CAGE

b. TELEPHONE

See attached schedule to complete quote information.

Quoter must also complete the following:

a. Quotation is valid for 90 days from date specified in Block 10 above unless otherwise indicated: _____________ .

b. Prices quoted are:

___ Contained in Commercial Catalog or Published Price List No. ___________________ dated _______________ page __________ .

___ Contained in Internal Price List No. _______________dated ____________________, which may be examined at our facility.

___ Commercial sales of comparable quantities: Quantity ____________ ; Price _____________;

___ Customer ________________________.

___ Other (provide basis) ______________________________________ _______________________________________ .

c. FOB Point: ____ Destination ____ Origin Shipping Point (City, State) _________________________________________ .

d. If delivery period shown in Block 6 is unacceptable, provide best possible delivery: _________________________________.

e. Remittance Address (Name, Street, City, State, ZIP): Same as Block 13 unless otherwise indicated below:

f. Vendor FAX Number: ____________________ Vendor Toll-Free Number: ____________________ Vendor E-mail: ______________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 2 OF 68 PAGES

SPE1C1-18-Q-0153

CONTINUED ON NEXT PAGE

The Government will evaluate quotes utilizing a Best Value Tradeoff methodology considering the following evaluation factors: price and past performance. These factors are equal in importance. The Government reserves the right to pay a reasonable premium to a responsive offer for better past performance. This means that the Government may make an award to a vendor that submits other than the lowest evaluated price. Past performance evaluation will utilize the Supplier Performance Risk System (SPRS) and will be evaluated in accordance with DFARS 252.213-7000.The evaluation criteria stated in this paragraph supersede any inconsistent provisions contained elsewhere in the solicitation.

* This solicitation contains multiple lines. Award will be made to the offer that represents the best value to the government

*Variation in quantity is +/- 2%

*FAR 52.248-01, Alt III Value Engineering is applicable to this award.

*Five (5) first articles of each line item are due 30 days after date of award.

Submit Samples to:

DLA Troop Support 700 Robbins Ave.

Philadelphia, PA 19111 Attn: Robert Fagan Bldg. 3 / WK Station 5132

Note: The government reserves the right to cancel the order if first article samples are not received 30 days after award or in the event of First Article Failure. Repeated First Article failure may result in termination for default.

*The Quality Standards of DPSCM 4155.3 apply to this acquisition

*VIM-ASAP is the ONLY authorized method to electronically process requests for payment to WAWF-RA.

*YOU MUST REGISTER IN VIM TO INVOICE ELECTRONICALLY

*If you are not registered to access VIM please go to vim.dla.mil and contact the VIM helpdesk desk at VIMSUPPORT@dla.

mil

*In order to be considered for this award bidder must provide an end product manufactured by a vendor certified by The Institute of Heraldry (TIOH) and listed on the The Institute of Heraldry certified manufacturer list. The current list is found here: http://www.tioh.hqda.pentagon.mil/Catalog/VendorList.aspx.

*Please following directions listed here http://www.tioh.hqda.pentagon.mil/Content/docs/Contact-Us_Final.pdf to inquire about becoming a TIOH Certified Manufacturer.

*For quoting/Dibbs help please see: https://www.dibbs.bsm.dla.mil/Refs/help/DIBBSHelp.htm *To sign up for the Supplier Performance Risk System (SPRS) or to check your (SPRS) score please go to : https://www.

sprs.csd.disa.mil

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLIES/SERVICES: PGC: 11334

ITEM DESCRIPTION:

INSIGNIA, SHOULDER SLEEVE, EMBROIDERED

7TH ARMY CORPS, OCP

BAGBY GREEN 67204 AND BLACK HAN 67138

WITH HOOK FASTENER TAPE BACKING

OVEREDGE STITCHING REQUIRED

STITCHES COUNT 5900 MINIMUM

DD 22571 A-1-63 1/19/2017

CARTOON A-1-63 11/22/1978

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

CONVERTION FROM ACU TO OCP:

FOLIAGE GREEN BACKGROUND TO BE BAGBY GREEN 67204

BLACK TO REMAIN BLACK HAN 67138

BROWN TO BE OLIVE DRAB 67133

UNLESS PRE-APPROVED BY THE CONTRACTING OFFICER

ALL ACU HOOK FASTENER BACKING SHALL BE FOLIAGE

GREEN AND OVEREDGE TO THE INSIGNIA.

ALL OCP HOOKFASTENER BACKING SHALL BE TAN 499 AND

OVEREDGE TO THE INSIGNIA

. CAUTION NOTICE

THE DEPARTMENT OF DEFENSE IS PROHIBITED BY THE

PROVISIONS OF THE BERRY AMENDMENT FROM

PROCURING ITEMS OF CLOTHING THAT HAVE NOT BEEN

GROWN OR PRODUCED IN THE UNITED STATES OR ITS

POSSESSIONS.

IF OTHER THAN SCHIFFLI EMBROIDERY MACHINE IS USED<(>,<)>

THE STITCH COUNT ON GOVERNMENT CARTOON MUST BE DOUBLED.

ALTHOUGH THE DOCUMENT CALLS FOR MORE THAN ONE

YARN, ONLY THE ALTERNATE CITED TO RAYON IN THIS

CASE POLYESTER, WILL BE CONSIDERED FOR DLA

TROOP SUPPORT CONTRACTS.

INSIGNIA SHALL BE FABRICATED IN ACCORDANCE WITH

MIL-DTL-14652B DATED, 18 DEC. 2001 AND

APPLICABLE CARTOON AND DRAWING.

ADDITIONAL INFORMATION FOR MIL-DTL-14652:

PAGE 10, PARA 4.1.1, FIRST ARTICLE INSPECTION

AT THE END OF PARA. ADD "THE FIRST ARTICLE

SHALL BE BEST QUALITY PRE-PRODUCTION SAMPLES.".

THE FIRST ARTICLE SAMPLES MUST PACKAGED AND

LABELED IN THE SAME MANNER AS THE CONTRACT

QUANTITY UNIT PACK.

PARA. 4.1.2 CONFORMANCE INSPECTION. AT THE END

OF PARA. ADD "THE CONFORMANCE INSPECTION SHALL

CONSIST OF VISUAL EXAMINATION OF END ITEM AND

EXAMINATION FOR DIMENSIONS.".

PARA. 4.3 METHODS OF INSPECTION ADD "EACH LOT

SHALL BE INSPECTED IN ACCORDANCE WITH

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11334 CONT'D

ANSI/ASQC Z1.4 AND CONTRACT.".

PARA. 4.3.1 TESTING OF COMPONENTS.

AT THE END OF PARA. ADD "THE SAMPLE

SIZE SHALL BE THREE UNIT FOR EACH TEST

CHARACTERISTIC OF EACH COMPONENT. THE LOT

SHALL BE UNACCEPTABLE IF ONE OR MORE UNITS

FAIL TO MEET THE REQUIREMENTS IN TABLE III"."

PAGE 11, PARA. 4.3.2 VISUAL EXAMINATION OF

END ITEM. AT THE END OF PARA. ADD "DEFECTS

SHALL BE EXPRESSED IN DEFECTS PER HUNDRED

UNITS.

THE INSPECTION LEVEL SHALL BE II. THE

ACCEPTABLE QUALITY LEVEL SHALL BE .40 FOR

MAJOR AND 1.0 FOR MAJOR AND MINOR DEFECTS

COMBINED.".

PAGE 13, PARA 4.3.3 EXAMINATION FOR DIMENSION.

AT THE END OF THE PARA. ADD "THE DEFECTS SHALL

BE EXPRESSED IN DEFECTS PER HUNDRED UNITS.

THE INSPECTION LEVEL SHALL BE S3. THE

ACCEPTABLE QUALITY LEVEL SHALL BE 1.5 FOR

MAJOR DEFECTS. THE FIRST ARTICLE WILL BE

REJECTED IF THE END ITEM HAVE ANY MAJOR

DEFECTS.".

PARA. 4.3.4 END ITEM TESTING. AT THE END OF

PARA. ADD "THE SAMPLE SIZE SHALL BE 10 INSIGNIAS

THE LOT SHALL BE UNACCEPTABLE IF ONE OR MORE

UNITS FAIL TO MEET THE REQUIEMENTS IN

TABLE V.".

PAGE 14, PARA. 5.1 PACKAGING ADD THE FOLLOWING:

"UNIT PACKAGING. INSIGNIA OF ONE TYPE

STYLE AND CLASS SHALL BE PUT IN BUNDLES

OF TWENTY EACH AND PLACED IN A POLYETHYLENE

BAG. THE BAG SHALL BE HEAT SEALED OR TAPED

CLOSED. EACH BUNDLE SHALL BE MARKED

IN ACCORDANCE WITH MIL-STD-129.

PAGE 14, PARA. 6.3 SAMPLES, DELETE IN ITS

ENTIRETY.

PAGE 4, ADD NEW PARAGRAPHS AFTER 3.3.1.1 AS

FOLLOWS:

(A.)THE FOLLOWING EMBROIDERED ORGANIZATIONAL

INSIGNIAS SHALL HAVE THE HOOK FASTENER ON THE

REVERSE:

TYPE I, STYLE 1, CLASS 1 AND THE REVERSE U.S.

NATIONAL FLAG ONLY.

TYPE I, STYLE 1, CLASS 2

(B.)THE HOOK FASTENER SHALL COVER THE

ENTIRE BACK OF THE INSIGNIA AND SHALL BE

FINISHED WITH THE OVEREDGE

STITCHING. AS AN ALTERNATIVE, WHEN THE

SHAPE OR SIZE OF THE INSIGNIA PROHIBITS

THE OVEREDGE STITCH THROUGH THE HOOK

FASTENER, THE INSIGNIA SHALL FIRST BE OVEREDGED

THEN PLACE THE HOOK FASTENER TO THE BACK OF THE

INSIGNIA AND ATTACH IT BY SEWING A SINGLE ROW OF

LOCK STITCHING ON THE OVEREDGE STITCH LINE WITH

A MINIMUM OF 12 TO 14 STITCHES PER INCH AND

BACKSTITCHED NOT LESS THAN 1/4) AT START AND

STOP.

(C.)THE HOOK FASTENER SHALL BE A GOOD AND

MATCH TO FOLIAGE GREEN 504 (FOLIAGE GREEN

CABLE HDB 67202 IN THE NEXT REVISION

OF THE DEPARTMENT OF DEFENSE STANDARD

SHADE FOR HERALDIC YARNS FOR

EMBROIDERY AND RIBBONS).

-IN THE INTERIM, THE USE OF CAMOUFLAGE GREEN

483 AND BLACK CABLE HAN 67138 UNTIL THE

FOLIAGE GREEN 504 SHADE HOOK FASTENER IS

AVAILABLE.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11334 CONT'D

-THE HOOK FASTENER SHALL BE TYPE

II, CLASS 1 OF A-A-55126A. THE HOOK

FASTENER SHALL BE FREE OF SLIT OR SPLIT

EDGES. AS AN ALTERNATE, VELCRO BRAND HTH

841 EXTRUDED HOOK OR SIMILAR BRAND

OFFERING A MINIMUM OF 1 POUND PEEL PER

INCH AND 30 POUND PER SQUARE INCH SHEAR

STRENGTH MAY BE USED.

WHEN SPECIFIED IN THE ITEM DESCRIPTION

-ALL AREAS OF SHOULDER SLEEVE INSIGNIA THAT ARE

SHOWN ON DRAWINGS AND CARTOONS TO

BE OLIVE DRAB 67133 SHALL BE FOLIAGE

GREEN 504 ON THE SUBDUED INSIGNIA.

SUGGESTED SUPPLIER

BRADFORD , TELE 401-377-2231

INTERIM CHANGES TO A-A-55126B,

THE FOLLOWING CHANGES ARE FOR ALL CURRENT, PENDING AND FUTURE

PROCUREMENTS OF THE SUBJECT DOCUMENT UNTIL SUCH TIME AS THE DOCUMENT IS

AMENDED OR REVISED.

PAGE 4. TABLE I, PHYSICAL REQUIREMENTS, CHARACTERISTIC, SHEAR STRENGTH

,DELETE LBS/SQ INCH (MIN), ADD SHEAR STRENGTH, LBS/2 SQ INCH (MIN).

PAGE 5 TABLE II, PHYSICAL REQUIREMENTS; CHARACTERISTIC, LENGTH

DIMENSIONAL STABILITY, % (MAX); LOOP, ALL CLASSES DELETE .0; ADD ALL

CLASSES 4.0.

PAGE 7, Paragraph 3.10.2, Change the following title of paragraph from:

"Fray resistance of Universal Camouflage Shades" and replace with "Fray resistance of Camouflage Prints"

PAGE 14, Paragraph 7.3.4 Change the following title of paragraph from:

Fray resistance for Universal Camouflage Shades." and replace with "Fray resistance for Camouflage Prints."

ADDITIONAL INFORMATION FOR V-T-276:

V-T-276 HAS BEEN CANCELLED AND REPLACED BY

A-A-52094

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

(ref. T1481)

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND

ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF

THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL

PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,

AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED.

THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN

BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11334 CONT'D

FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH

THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE

CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION

(INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER."

PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE

SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING:

"THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40

MINUTES OR UNTIL SAMPLES ARE DRY."

METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1,

PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLE UNIT". PAGE 1,

PARA. 4: DELETE "APPARTUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA.

5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY".

PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER

"TO" ADD "+-".

PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE

FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING

IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR

FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE

LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY.

NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500

VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A

PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE

(5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED.

THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE

PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL

DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT

NECESSARY."

PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE

SPECIMEN DID" IN ITS ENTIRETY.

PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND

DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED."

PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE:

"REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS."

PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH

THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL

BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS

THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY

AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH

VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS

DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE

MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN

4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER

THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE

INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE."

PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE

WITH "406D".

AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC

DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY

FOR THE TEST."

(Ref. T0215)

ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN

CANCELLED AND REPLACED BY ASTM-D-6193, 4/98

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11334 CONT'D

STANDARD PRACTICES FOR STITCHES AND SEAMS.

THIS STANDARD SHOULD BE USED IN PREFERENCE

TO FED-STD-751.

(ref. T0216 - May 18, 2006)

INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2

STANDARD INSPECTION.

ADDITIONAL INFORMATION FOR MIL-STD-105E:

MIL-STD-105E, dated 10 May 1989, is hereby canceled.

Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."

Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.

(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)

MIL-STD-129R - DEPARTMENT OF DEFENSE STANDARD PRACTICE

,,,,,, - MILITARY MARKING FOR SHIPMENT AND STORAGE

,,,,,, DATED 18 FEBRUARY 2014

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C<(>&<)>T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE

MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA

TROOP SUPPORT C<(>&<)>T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING

CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS

OF C<(>&<)>T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST

CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE"

SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER.

ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4:

NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED.

APPLICATION FOR COPIES SHOULD BE ADDRESSED TO:

AMERICAN SOCIETY FOR QUALITY

600 NORTH PLANKINTON AVENUE

MILWAUKEE, WISCONSIN 53203

(Ref. T0795 - May 17, 2006)

FIVE (5) FIRST ARTICLE SAMPLES ARE REQUIRED. FIRST ARTICLE TESTING SHALL

BE PERFORMED AND THE CONTRACTOR WILL BE NOTIFIED IN WRITING WITHIN

THIRTY (30) CALENDAR DAYS AFTER CONTRACTING OFFICER'S RECEIPT OF FIRST

ARTICLE SAMPLES.

IAW BASIC SPEC NR MIL-DTL-14652B NOT 1

REVISION NR B DTD 07/30/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 22571 A-1-63

REVISION NR DTD 09/21/2006

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-44436B NOT 1

REVISION NR B DTD 02/28/2017

PART PIECE NUMBER:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 68 PAGES

CONTINUED ON NEXT PAGE

SUPPLY/SERVICE: PGC: 11334 CONT'D

IAW REFERENCE SPEC NR MIL-C-87052B

REVISION NR B DTD 05/14/1990

PART PIECE NUMBER:

IAW REFERENCE STD NR MIL-STD-147E(1)

REVISION NR E DTD 12/23/2013

PART PIECE NUMBER:

IAW REFERENCE CID A-A-1492B NOT 1

REVISION NR B DTD 11/03/1999

PART PIECE NUMBER:

IAW REFERENCE CID A-A-1671B(1) NOT 3

REVISION NR 1 DTD 11/19/2004

PART PIECE NUMBER:

IAW REFERENCE CID A-A-52094A NOT 1

REVISION NR A DTD 02/28/2017

PART PIECE NUMBER:

IAW REFERENCE UNK PPP-T-45D NOT 2

REVISION NR D DTD 06/28/1993

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-191A(6) NOT 7

REVISION NR A DTD 08/09/2000

PART PIECE NUMBER:

IAW REFERENCE UNK FED-STD-751A(1)(1) NOT 2

REVISION NR 1 DTD 09/14/1999

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ASTM D6193-16

REVISION NR DTD 01/01/2016

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD ANSI/ASQZ1.4-2003

REVISION NR DTD 01/01/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 22571 A-1-63CARTOON

REVISION NR DTD 11/22/1978

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT .

0001 8455-01-665-8072 8,000.000 EA $ ________________ $ ________________

INSIGNIA,SHOULDER

PRICING TERMS: Firm Fixed Price

QTY VARIANCE: PLUS 2% MINUS 2%

INSPECTION POINT: DESTINATION

ACCEPTANCE POINT: DESTINATION

FOB: DESTINATION DELIVERY DATE: 150 DAYS ADO

PREP FOR DELIVERY:

PKGING DATA - MIL-STD-2073-1D, 15 DEC 1999

QUP:020 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:O

INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH MD00100452 REV B DATED JULY 01, 2008

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11334 CONT'D

PACKAGING SHALL BE ACCORDING WITH MIL-DTL-14652B AND ASTM-D-3591 AND

THIS DOCUMENT

INSIGNIA OF ONE TYPE, STYLE AND CLASS SHALL

BE PUT IN BUNDLE OF TWENTY (20) EACH.

PLACE THE BUNDLE IN A SNUG FITTING PLASTIC

BAG. TWENTY (20) BUNDLES, (400 INSIGNIA) OF ONE

TYPE, CLASS AND STYLE SHALL BE PLACED IN A SNUG

FITTING PLASTIC BAG AND SEALED BY HEAT

OR TAPE.

Label: Each bundle shall be labeled with the following:

Bar Code:

NSN:

Cage:

Item Name:

Quantity Unit Pack:

Contract Number:

A TOTAL OF NO MORE THAN FOURTEEN (14) BAGS, 5600

INSIGNIAS, SHALL BE PLACED IN A CONTAINER IN

ACCORDANCE WITH ASTM D 3951. THE QUANTITY OF

EACH CONTAINER MUST BE CONSISTANT THROUGHOUT THE

CONTRACT EXCEPT WHEN THE LAST CONTAINER QUANTITY

PREVENTS CONSISTENCE.

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129P

PALLETIZATION SHALL BE IN ACCORDANCE WITH

MIL-HNBK-774.

252.211-7006 - RADIO FREQUENCY IDENTIFICATION (RFID) Required (ref. T8379; Nov. 08, 2006)

NOTE: WHEN THE CONTRACT OR DELIVERY QUANTITY

SUPPORTS THE USE OF A PALLET, PALLETIZATION

REQUIREMENTS SHALL APPLY.

SIGNIFICANT NOTE - "PALLETIZATION IS REQUIRED FOR THESE SUPPLIES".

NOTE: THE FOLLOWING APPLIES TO ALL NON-MANUFACTURED WOOD PACKAGING

MATERIALS:

"All Wood Packaging Material (WPM) acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo, or when wood is being acquired by DLA for future use as packaging material. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. Packaging materials exempt from the requirements are materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). All WPM shall comply with one of the following official quality control programs:

Heat Treatment (HT) or Kiln Dried Heat Treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/; or

All WPM shall include certification/quality markings in accordance with the ALSC or NWPCA standards, as applicable. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible.

All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government."

PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLETIZED LOAD DIMENSIONS

SHALL NOT EXCEED 43 INCHES IN LENGTH, 52 INCHES IN WIDTH, AND 54 INCHES

IN HEIGHT (INCLUDING THE PALLET).

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 68 PAGES

CONTINUED ON NEXT PAGE

SUPPLY/SERVICE: PGC: 11334 CONT'D

THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING

MATERIALS. THE USE OF METAL BANDING, IN SECURING BOXES TO PALLETS, IS

DISCOURAGED. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF

IDENTICAL QUANTITIES, OF ONE NSN, TO THE MAXIMUM EXTENT POSSIBLE.

PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO

LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN

ONE NSN. AT THE END OF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY

BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY

MARKED "SHORT" OR "OVER".

MIL-STD-147 IS REFERENCED FOR PALLETIZED LOADS.

IN ADDITION TO REQUIREMENTS SPECIFIED ABOVE THE FOLLOWING CLAUSE ALSO

APPLIES:

52.247-9012 - REQUIREMENTS FOR TREATEMENT OF WOOD PACKAGING MATERIALS

(WPM) - (JULY 2006)

PARCEL POST ADDRESS:

UY8615

ARIZONA INDUSTRIES FOR THE BLIND

515 N 51ST AVENUE NUMBER 130 DOCK 1

PHOENIX AZ 85043

FOR TRANSPORTATION ASSISTANCE SEE DLAD 52.247-9034. FOR FIRST DESTINATION TRANSPORTATION (FDT) AWARDS SEE DLAD

52.247-9059 AND

CONTRACT INSTRUCTIONS INSTEAD.

FREIGHT SHIPPING ADDRESS:

UY8615

ARIZONA INDUSTRIES FOR THE BLIND

515 N 51ST AVENUE NUMBER 130 DOCK 1

PHOENIX AZ 85043

GOVT USE

External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date .

0001 0071207059 0001 N/A N/A N/A 09/10/2018

SUPPLIES/SERVICES: PGC: 11343

11TH ARMY CORPS, OCP

BAGBY GREEN 67204 AND BLACK HAN 67138

WITH HOOK FASTENER TAPE BACKING

OVEREDGE STITCHING REQUIRED

STITCHES COUNT 5307 MINIMUM

DD 22571 A-1-67 06/29/1967

CARTOON A-1-67 05/11/1977

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11343 CONT'D

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR

SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

BLACK TO REMAIN BLACK HAN 67138

BROWN TO BE OLIVE DRAB 67133

UNLESS PRE-APPROVED BY THE CONTRACTING OFFICER

ALL ACU HOOK FASTENER BACKING SHALL BE FOLIAGE

GREEN AND OVEREDGE TO THE INSIGNIA.

ALL OCP HOOKFASTENER BACKING SHALL BE TAN 499 AND

OVEREDGE TO THE INSIGNIA

. CAUTION NOTICE

THE DEPARTMENT OF DEFENSE IS PROHIBITED BY THE

PROVISIONS OF THE BERRY AMENDMENT FROM

PROCURING ITEMS OF CLOTHING THAT HAVE NOT BEEN

GROWN OR PRODUCED IN THE UNITED STATES OR ITS

POSSESSIONS.

IF OTHER THAN SCHIFFLI EMBROIDERY MACHINE IS USED<(>,<)>

THE STITCH COUNT ON GOVERNMENT CARTOON MUST BE DOUBLED.

ALTHOUGH THE DOCUMENT CALLS FOR MORE THAN ONE

YARN, ONLY THE ALTERNATE CITED TO RAYON IN THIS

CASE POLYESTER, WILL BE CONSIDERED FOR DLA

TROOP SUPPORT CONTRACTS.

INSIGNIA SHALL BE FABRICATED IN ACCORDANCE WITH

MIL-DTL-14652B DATED, 18 DEC. 2001 AND

APPLICABLE CARTOON AND DRAWING.

ADDITIONAL INFORMATION FOR MIL-DTL-14652:

PAGE 10, PARA 4.1.1, FIRST ARTICLE INSPECTION

AT THE END OF PARA. ADD "THE FIRST ARTICLE

SHALL BE BEST QUALITY PRE-PRODUCTION SAMPLES.".

THE FIRST ARTICLE SAMPLES MUST PACKAGED AND

LABELED IN THE SAME MANNER AS THE CONTRACT

QUANTITY UNIT PACK.

PARA. 4.1.2 CONFORMANCE INSPECTION. AT THE END

OF PARA. ADD "THE CONFORMANCE INSPECTION SHALL

CONSIST OF VISUAL EXAMINATION OF END ITEM AND

EXAMINATION FOR DIMENSIONS.".

PARA. 4.3 METHODS OF INSPECTION ADD "EACH LOT

SHALL BE INSPECTED IN ACCORDANCE WITH

ANSI/ASQC Z1.4 AND CONTRACT.".

PARA. 4.3.1 TESTING OF COMPONENTS.

AT THE END OF PARA. ADD "THE SAMPLE

SIZE SHALL BE THREE UNIT FOR EACH TEST

CHARACTERISTIC OF EACH COMPONENT. THE LOT

SHALL BE UNACCEPTABLE IF ONE OR MORE UNITS

FAIL TO MEET THE REQUIREMENTS IN TABLE III"."

PAGE 11, PARA. 4.3.2 VISUAL EXAMINATION OF

END ITEM. AT THE END OF PARA. ADD "DEFECTS

SHALL BE EXPRESSED IN DEFECTS PER HUNDRED

UNITS.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11343 CONT'D

THE INSPECTION LEVEL SHALL BE II. THE

ACCEPTABLE QUALITY LEVEL SHALL BE .40 FOR

MAJOR AND 1.0 FOR MAJOR AND MINOR DEFECTS

COMBINED.".

PAGE 13, PARA 4.3.3 EXAMINATION FOR DIMENSION.

AT THE END OF THE PARA. ADD "THE DEFECTS SHALL

BE EXPRESSED IN DEFECTS PER HUNDRED UNITS.

THE INSPECTION LEVEL SHALL BE S3. THE

ACCEPTABLE QUALITY LEVEL SHALL BE 1.5 FOR

MAJOR DEFECTS. THE FIRST ARTICLE WILL BE

REJECTED IF THE END ITEM HAVE ANY MAJOR

DEFECTS.".

PARA. 4.3.4 END ITEM TESTING. AT THE END OF

PARA. ADD "THE SAMPLE SIZE SHALL BE 10 INSIGNIAS

THE LOT SHALL BE UNACCEPTABLE IF ONE OR MORE

UNITS FAIL TO MEET THE REQUIEMENTS IN

TABLE V.".

PAGE 14, PARA. 5.1 PACKAGING ADD THE FOLLOWING:

"UNIT PACKAGING. INSIGNIA OF ONE TYPE

STYLE AND CLASS SHALL BE PUT IN BUNDLES

OF TWENTY EACH AND PLACED IN A POLYETHYLENE

BAG. THE BAG SHALL BE HEAT SEALED OR TAPED

CLOSED. EACH BUNDLE SHALL BE MARKED

IN ACCORDANCE WITH MIL-STD-129.

PAGE 14, PARA. 6.3 SAMPLES, DELETE IN ITS

ENTIRETY.

PAGE 4, ADD NEW PARAGRAPHS AFTER 3.3.1.1 AS

FOLLOWS:

(A.)THE FOLLOWING EMBROIDERED ORGANIZATIONAL

INSIGNIAS SHALL HAVE THE HOOK FASTENER ON THE

REVERSE:

TYPE I, STYLE 1, CLASS 1 AND THE REVERSE U.S.

NATIONAL FLAG ONLY.

TYPE I, STYLE 1, CLASS 2

(B.)THE HOOK FASTENER SHALL COVER THE

ENTIRE BACK OF THE INSIGNIA AND SHALL BE

FINISHED WITH THE OVEREDGE

STITCHING. AS AN ALTERNATIVE, WHEN THE

SHAPE OR SIZE OF THE INSIGNIA PROHIBITS

THE OVEREDGE STITCH THROUGH THE HOOK

FASTENER, THE INSIGNIA SHALL FIRST BE OVEREDGED

THEN PLACE THE HOOK FASTENER TO THE BACK OF THE

INSIGNIA AND ATTACH IT BY SEWING A SINGLE ROW OF

LOCK STITCHING ON THE OVEREDGE STITCH LINE WITH

A MINIMUM OF 12 TO 14 STITCHES PER INCH AND

BACKSTITCHED NOT LESS THAN 1/4) AT START AND

STOP.

(C.)THE HOOK FASTENER SHALL BE A GOOD AND

MATCH TO FOLIAGE GREEN 504 (FOLIAGE GREEN

CABLE HDB 67202 IN THE NEXT REVISION

OF THE DEPARTMENT OF DEFENSE STANDARD

SHADE FOR HERALDIC YARNS FOR

EMBROIDERY AND RIBBONS).

-IN THE INTERIM, THE USE OF CAMOUFLAGE GREEN

483 AND BLACK CABLE HAN 67138 UNTIL THE

FOLIAGE GREEN 504 SHADE HOOK FASTENER IS

AVAILABLE.

-THE HOOK FASTENER SHALL BE TYPE

II, CLASS 1 OF A-A-55126A. THE HOOK

FASTENER SHALL BE FREE OF SLIT OR SPLIT

EDGES. AS AN ALTERNATE, VELCRO BRAND HTH

841 EXTRUDED HOOK OR SIMILAR BRAND

OFFERING A MINIMUM OF 1 POUND PEEL PER

INCH AND 30 POUND PER SQUARE INCH SHEAR

STRENGTH MAY BE USED.

WHEN SPECIFIED IN THE ITEM DESCRIPTION

-ALL AREAS OF SHOULDER SLEEVE INSIGNIA THAT ARE

SHOWN ON DRAWINGS AND CARTOONS TO

BE OLIVE DRAB 67133 SHALL BE FOLIAGE

GREEN 504 ON THE SUBDUED INSIGNIA.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 68 PAGES

CONTINUED ON NEXT PAGE

SECTION B

SUPPLY/SERVICE: PGC: 11343 CONT'D

SUGGESTED SUPPLIER

AMENDED OR REVISED.

PAGE 4. TABLE I, PHYSICAL REQUIREMENTS, CHARACTERISTIC, SHEAR STRENGTH

,DELETE LBS/SQ INCH (MIN), ADD SHEAR STRENGTH, LBS/2 SQ INCH (MIN).

PAGE 5 TABLE II, PHYSICAL REQUIREMENTS; CHARACTERISTIC, LENGTH

DIMENSIONAL STABILITY, % (MAX); LOOP, ALL CLASSES DELETE .0; ADD ALL

CLASSES 4.0.

PAGE 7, Paragraph 3.10.2, Change the following title of paragraph from:

"Fray resistance of Universal Camouflage Shades" and replace with "Fray resistance of Camouflage Prints"

PAGE 14, Paragraph 7.3.4 Change the following title of paragraph from:

Fray resistance for Universal Camouflage Shades." and replace with "Fray resistance for Camouflage Prints."

ADDITIONAL INFORMATION FOR V-T-276:

V-T-276 HAS BEEN CANCELLED AND REPLACED BY

A-A-52094

ADDITIONAL INFORMATION FOR A-A-52094A THREAD, COTTON

NO ADDITIONAL INFORMATION

(ref. T1481)

ADDITIONAL INFORMATION FOR FED-STD-191:

FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW

DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM

SPECIFICATION FOR REPLACEMENT ASTM.

INTERIM CHANGES TO FED-STD-191A:

TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE

SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE

OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND

ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF

THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL

PLATE".

TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA

4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".

THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING

SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,

AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1-

TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE

DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED.

THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN

BASIC OR ANY REFERENCED DOCUMENT.

METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.

PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE

FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH

THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE

CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION

(INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF

THE DIAL PLATE."

METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5,

PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND

BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE

SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND

PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG.

F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE

TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 68 PAGES