DDDC Box Machine Salient Characteristics.doc
DOC document 45 KB Posted
- Attached to
- DLA Distribution San Diego (DDDC) Box Making Machine Federal contract opportunity
- Solicitation number
- SP330024Q0204
- Issued by
- Defense Logistics Agency Distribution
About this file
This document appears to be a set of salient characteristics for a Box Making Machine required by the Defense Logistics Agency (DLA) Distribution San Diego facility. The key requirements include:
- The machine must be able to cut, slot, crease, and process single and double wall corrugated fiberboard up to 450 lbs bursting strength.
- It must have digital entry and programmable sequence control for quick setup between 30 seconds to 2 minutes for different box styles and sizes.
- The machine shall accept up to 86-inch widths and be capable of producing various box types including RSC, OSC, FOL, HSCC, and others.
- It must include 5 cut heads, 4 score heads, and have safety interlocks and an automatic air blower.
- Upon installation, the contractor shall provide maintenance manuals, operator manuals, and a minimum of 8 hours of training for 4 warehouse employees.
This requirement is being procured via a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS 333993 with a size standard of 600 employees. The Government intends to award one Firm-Fixed-Price contract as a result of this Request for Quotation (RFQ) solicitation.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Tab 11 - CSS SP330024Q0204.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Machine must be equal to or greater than the T-Roc HBM86 with Back Score capability:
A. Box maker shall be able to cut, slot, crease, and process single wall and double wall corrugated fiberboard with a capacity bursting (Mullen) test up to 450#. .
B. Digital entry and display for quick entry and recall of box data without having to reset. Programmable sequence control system to allow data entry time. (For box styles and length, width and height) Set up for the machine should be between 30 seconds to 2 minutes for each new box.
C. The box maker shall accept a width of 86”
D. The machine should have the ability to make boxes of these types:
· FTC- full telescope carton
· RSC- regular slotted cartons
· OSC- overlap slotted carton
· FOL- full overlap slotted carton
· HSCC-half slotted carton
· DBLCC- double cover carton
· FTHS-full telescope half slotted (2pc)
· OPF- one-piece folder
· FPF- five-panel folder
· TS- triple slide carton
· PADS and LINERS
E. Variable crease adjustments F. Slot depth capacity of 19”, with a 38” width capacity G. Include 5 cut heads & 4 score heads
H. Machine main voltage to be 208 AC volts 3 phase I. Automatic air blower to clean out cut-off section J. In-feed & out-feed table
K. Safety interlocks at access doors to prevent accidental injury
1.1 Training
Upon completion of installation and testing the contractor shall provide the following documentation and training.
A. Maintenance manuals for corrective and preventative maintenance (3 copies) and list of spare parts B. Operator manuals (3 copies) Provides details for operational procedures for equipment and safety procedures for equipment operation C. Operator training: The contractor shall provide minimum 8 hours training for 4 DDDC warehouse employees for the equipment as follows:
a. Procedure for operation of the equipment
b. Provide training of programming sequence control for data entry.
c. Safety training
d. Troubleshooting procedure for jam clearing and set-up
INSTALLATION MUST BE PERFORMED BY FACTORY CERTIFIED TECHNICIANS.
Place of Performance Defense Logistics Agency
Defense Distribution Depot San Diego
Naval Base 32nd Street
BLDG 3581
San Diego, CA 92136
POC: Gordon Duncan @ 619-512-0421 / gordon.duncan@dla.mil Page | 2
File details come from the government source that posted it. Updated .