AK16906176.pdf

PDF 489 KB Posted Oct 19, 2023

Attached to: DDAA SPI Sets Federal contract opportunity
Solicitation number: SP3300-24-Q-0010
Issued by: Defense Logistics Agency Distribution

About this file

Written by GovTribe AI · Dec 21, 2023

This document is a special packaging instruction sheet for a motor control part. It provides detailed requirements for cleaning, preserving, packing, marking, and inspecting the part in accordance with military standards. The part must be wrapped, cushioned, heat sealed in a bag, and placed within a fiberboard or corrugated box which is then to be palletized if over 125 pounds. Accompanying pages depict the arrangement of cushioning materials and adhesives used to form the protective enclosures for the part. A bill of materials specifies the necessary wrapping, cushioning, bag, container, and other items to be used according to military specifications.

View the file

Other files for this federal contract opportunity

Other files attached to DDAA SPI Sets, newest first.
File	Type	Posted
Tab 11 - SP3300-24-Q-0010 P00002.pdf	PDF	Nov 6, 2023
Tab 11 - SP3300-24-Q-0010 P00001.pdf	PDF	Oct 30, 2023
AK12922993.pdf	PDF	Oct 19, 2023
Tab 11 - SP3300-24-Q-0010.pdf	PDF	Oct 19, 2023

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

3033190-100/62983-RMV3-160-4 (62983) MOTOR,CONTROL 19207 AK16906176

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

6105-01-690-6176 NOV 10, 2021 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 51.0 2.861 21.9 X 16.6 X 13.6

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 41

13. CLEANING

MIL-STD-2073-1

14. DRYING

MIL-STD-2073-1

SEE NOTES

15. PACKING

a. LEVEL A

MIL-STD-2073-1 AND NOTE J

b. LEVEL B

MIL-STD-2073-1 AND NOTE J

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.

B. REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

C. CAP ALL PORTS WITH CAPS, ITEM, 5, IF PART IS ALREADY CAPPED THIS NOTE MY BE DISREGARDED.

D. WRAP PART WITH WRAP, ITEM 1, AND SECURE WITH WEATHER RESISTANT TAPE.

E. CREATE CUSHIONING ‘TRAY’ USING CUSHIONING, ITEMS 2B, 2C, 2D, 2E, AND 2F. ADHERE CUSHIONING

TOGETHER WITH ADHESIVE AS SHOWN ON PAGE 3.

F. CREATE CUSHIONING LID, USING CUSHIONING, ITEMS 2A AND 2B. ADHERE CUSHIONING TOGETHER WITH

ADHESIVE AS SHOWN ON PAGE 2.

G. PLACE PREPARED PART FROM NOTE D INTO CUSHIONING ‘TRAY.’ PLACE CUSHIONING LID FROM NOTE F, ONTO CUSHIONING ‘TRAY’ AS SHOWN ON PAGE 3 AND SECURE THE LID USING WEATHER RESISTANT TAPE.

H. PREPARE BAG, ITEM 3. PLACE PREPARED PART FROM NOTE E INTO BAG AND CLOSE BY HEAT SEALING.

I. PLACE PREPARED PART FROM NOTE F INTO CONTAINER, ITEM 4, AND CLOSE IN ACCORDANCE WITH ASTM-

D1974, METHOD 4B2.

J. LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

K. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKAGING IN ACCORDANCE WITH

MIL-STD-2073-1 AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-CC

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

3033190-100/62983-RMV3-160-4 (62983) MOTOR,CONTROL 19207 AK16906176

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

6105-01-690-6176 NOV 10, 2021 -

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

OMB No. 0704-0188

-CC

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

3033190-100/62983-RMV3-160-4 (62983) MOTOR,CONTROL 19207 AK16906176

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

6105-01-690-6176 NOV 10, 2021 -

(4 PLACES)

P/N: 3033190-100/62983-RMV3-160-4

NOTE: WRAP NOT

SHOWN FOR CLARITY,

ITEM 2D AND 2E

SHOWN AS

TRANSPARENT

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

*COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING OR PRESERVATIVE COATING

TO MIL-PRF-16173, GRADE 4.

OMB No. 0704-0188

-CC

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

3033190-100/62983-RMV3-160-4 (62983) MOTOR,CONTROL 19207 AK16906176

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

6105-01-690-6176 NOV 10, 2021 -

BILL OF MATERIALS

ITEM

NUMBER

DESCRIPTION

SIZE

SPECIFICATION DATA

QTY.

1 WRAP 40 X 22 A-A-59135, CLASS 1, GRADE A 1

2 CUSHIONING A-A-59136, CLASS 1, GRADE A, TYPE I

2A 15 X 12 X 2 1

2B 11 X 8 X 2 2

2C 11 X 8 X 2 1

SEE PAGE 2

2D 17 X 11 X 2 2

2E 17 X 12 X 2 2

2F 11 X 2 X 2 4

3 BAG 30 X 34 MIL-DTL-117, TYPE I, CLASS E, 1

4 CONTAINER 16 X 13 X 20 ASTM-D5118, TYPE CF, CLASS WR, 1

STYLE FOL, VARIETY DW,

GRADE V13c.

5 CAP A/R NAS 831 OR EQUIVALENT A/R

File details come from the government source that posted it. Updated Oct 19, 2023.