Combined Synopsis-Solicitation SP330020Q0049.pdf

SOLICITATION RFQ SP3300-20-Q-0049 Page 1 of 20

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in conjunction with Part 13 of the Federal Acquisition Regulation (FAR), as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is issued as a Request for Quote (RFQ) and the solicitation number is SP3300-20-Q- 0049.

2. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2020-04 effective 15 January 2020 and Defense Federal Acquisition Regulation Supplement (DFARS) DFARS Publication Notice (DPN) 20191231 effective 31 December 2019 and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 19- 19 through 18 effective 14 October 2019. The complete text of any of the clauses and provisions are available electronically from the following sites:

FAR- https://www.acquisition.gov/browsefar DFARS - https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ DLAD - http://www.dla.mil/HQ/Acquisition/Offers/DLAD.aspx

3. DLA Distribution Susquehanna, PA (DDSP) has a requirement for a contractor to provide a firm-fixed price quote for six (6) Enclosed Axle Trailers.

CLIN 0001 –Axle Trailer

48’ Enclosed Dual Axle Trailer in accordance with the Statement of Work and Specifications requirements.

Attachment 1- Statement of Work (SOW)

Attachment 2- Specifications

QUANTITY 6 @ $_______________ EA = $_______________ TOTAL

Ship to: SB3300

Shipping Address:

Defense Distribution Depot Susquehanna, PA (Truck Entrance: Intersection of Normandy Dr & Old York Rd) BLDG 750, 3rd ST New Cumberland, PA 17070

SHIPPING INSTRUCTION: All drivers must have an appointment to deliver to DLA Distribution Susquehanna. To request an appointment, send a scanned copy of the bill of lading to prelodge@dla.mil as soon as possible before the appointment but no later than 24 hours out.

Drivers shall present their appointment confirmation number to dispatch personnel upon arrival.

REQUIREMENTS FOR PALLETS

1. Material must be shipped on serviceable, winged pallets in accordance with MD00100452, Revision C, dated 09/2016. Please reference the following link for more information:

https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packagi ng/Palletization.aspx The complete specification for winged pallets can be found in Part 9 of ANSI MH1.

http://farsite.hill.af.mil/reghtml/regs/far2afmcfars/fardfars/far/FAR12.DOC#s126

SOLICITATION RFQ SP3300-20-Q-0049 Page 2 of 20

2. The pallet must be heat treated, certified, and stamped or branded with the appropriate certification markings in accordance with DOD Manual 4140.65-M.

Please reference the DLA Master List of Technical and Quality Requirements for information at this link:

https://www.dla.mil/HQ/Acquisition/Offers/DLAD/TechnicalandQualityMLofRequirements/ Additional information can be found at:

https://www.dla.mil/LandandMaritime/Offers/Services/TechnicalSupport/Logistics/Packagi ng/WoodPack.aspx

3. Failure to deliver supplies on pallets with these specifications will result in the Government not accepting the shipment when it arrives at destination.

4. The offeror must quote shipment of supplies in accordance with this requirement.

FAR 52.212-3 Evaluation – Commercial Items and its addenda.

4. This acquisition is being solicited as a 100% small business set-aside.

The Federal Supply Code (FSC) for this acquisition is 2330 and the North American Industry Classification System (NAICS) code is 336212 with a size standard of 1,000 employees.

5. Offerors shall quote a Firm Fixed Unit Price for CLIN 0001. Pricing shall be quoted as FOB Destination, with all transportation/shipping, delivery, packing and packaging charges included in the Firm Fixed Unit Price for each item. All prices must be rounded to two decimal points.

6. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449.

7. Proof Of Delivery: To ensure prompt payment to your company, the Proof of Deliveries must include the following:

• CONTRACT NUMBER or ORIGINAL DOCUMENT NUMBER

• DELIVERY ORDER NUMBER (as applicable)

• CLIN /MATERIAL NUMBER

• SPECIFIC QUANTITY SHIPPED IN REFERENCE TO QUANTITY ORDERED

• PRINTED NAME AND WRITTEN SIGNATURE OF A GOVERNMENT EMPLOYEE

8. System for Award Management: IAW FAR 4.1102(a), offerors are required to be registered in the System for Award Management (SAM) database at the time an offer or quotation is submitted in order to comply with the annual representations and certifications requirements. Refer to DFARS 204.1103 for helpful information on navigation and data entry in the SAM database.

Registration may be done on line at: www.acquisition.gov or www.sam.gov.

9. Invoicing and Payment: Invoices shall be submitted through Wide Area WorkFlow (WAWF).

The WAWF website is at https://wawf.eb.mil/. The web site contains instructions for registration and use, including how contractors submit invoices via WAWF.

10. All shipments must contain proper shipping documentation. Contractor shall attach, in a water resistant envelope, to the exterior shipping container a commercial packing list. All documents must include at a minimum, contract number and document number for the item, stock number, quantity, and unit of issue. Omission of any data on the shipping documentation could cause a delay in receipt of goods and significantly delay payment.

11. Mark Contract Number On All Correspondence https://www.dla.mil/HQ/Acquisition/Offers/DLAD/TechnicalandQualityMLofRequirements/ http://www.acquisition.gov/ http://www.sam.gov/ https://wawf.eb.mil/

SOLICITATION RFQ SP3300-20-Q-0049 Page 3 of 20

Contractor must mark the contract or purchase order number on all paperwork. The order number must appear on the exterior of the shipment. Failure to follow these instructions will hold up payment to you and could result in the return of merchandise at your expense.

12. Questions regarding this solicitation must be submitted by email to the Contract Specialist, Alexander Ramirez, at alexander.ramirez@dla.mil. Questions must be received by February 28, 2020, 10:00 AM Eastern Time. Questions received after this date and time may not receive a response. Answers to questions will be posted to the Beta.Sam.gov website via an amendment to the solicitation. No information concerning this solicitation will be provided in response to telephone calls.

13. Offerors responding to this announcement shall submit their quotations via email to alexander.ramirez@dla.mil. All quotes must be received by March 11, 2020 at 03:30 PM Eastern Time to be considered for award.

14. The following FAR, DFARS, and DLAD provisions apply to this acquisition:

FAR 52.212-1 – INSTRUCTIONS TO OFFERORS – COMMERCIAL ITEMS (DEVIATION 2018-

O0018) Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (d) product samples, (e) multiple offers, (h) multiple awards, and (i) availability of requirements documents cited in the solicitation.

The following provisions are Addenda to FAR 52.212-1 – Instructions to Offerors – Commercial Items and are incorporated by reference:

FAR 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal

Confidentiality Agreements or Statements--Representation FAR 52.204-7 System for Award Management FAR 52.204-16 Commercial and Government Entity Code Reporting FAR 52.204-17 Ownership or Control of Offeror FAR 52.204-20 Predecessor of Offeror FAR 52.209-2 Prohibition On Contracting With Inverted Domestic Corporations—Representation FAR 52.222-22 Previous Contracts and Compliance Reports FAR 52.222-25 Affirmative Action Compliance FAR 52.225-18 Place of Manufacture FAR 52.225-25 Prohibition on Contracting with Entities Engaging in Certain Activities or

Transactions Relating to Iran—Representation and Certifications DFARS 252.203-7005 Representation Relating to Compensation of Former DoD Officials DFARS 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls DFARS 252.225-7035 Buy American- Free Trade Agreements- Balance of Payments Program

Certificate-Basic

The following provisions are Addenda to FAR 52.212-1 – Instructions to Offerors – Commercial Items and are incorporated in full text:

FAR 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (AUG 2019)

(a) Definitions. As used in this provision--Covered telecommunications equipment or services, Critical technology, and Substantial or essential component have the meanings provided in clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition. Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after mailto:alexander.ramirez@dla.mil

SOLICITATION RFQ SP3300-20-Q-0049 Page 4 of 20

August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Contractors are not prohibited from providing--

(1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Representation. The Offeror represents that-- It [ ] will, [ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation.

(d) Disclosures. If the Offeror has responded affirmatively to the representation in paragraph (c) of this provision, the Offeror shall provide the following information as part of the offer--

(1) All covered telecommunications equipment and services offered (include brand; model number, such as original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable);

(2) Explanation of the proposed use of covered telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b) of this provision;

(3) For services, the entity providing the covered telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known); and

(4) For equipment, the entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of Provision)

FAR 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that—

SOLICITATION RFQ SP3300-20-Q-0049 Page 5 of 20

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

(End of Provision)

FAR 52.252-1 -- Solicitation Provisions Incorporated by Reference

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil/.

(End of Provision)

DFARS 252.213-7000- NOTICE TO PROSPECTIVE SUPPLIERS ON USE OF SUPPLIER

PERFORMANCE RISK SYSTEM IN PAST PERFORMANCE EVALUATIONS (MAR 2018)

(a) The Supplier Performance Risk System (SPSR) application (https://www.ppirssrng.csd.disa.mil/) will be used in the evaluation of suppliers’ past performance in accordance with DFARS 213.106-2(b)(i).

(b) SPRS collects quality and delivery data on previously awarded contracts and orders from existing Department of Defense reporting systems to classify each supplier’s performance history by Federal supply class (FSC) and product or service code (PSC). The SPRS application provides the contracting officer quantifiable past performance information regarding a supplier's quality and delivery performance for the FSC and PSC of the supplies being purchased.

(c) The quality and delivery classifications identified for a supplier in SPRS will be used by the contracting officer to evaluate a supplier’s past performance in conjunction with the supplier’s references (if requested) and other provisions of this solicitation under the past performance evaluation factor. The Government reserves the right to award to the supplier whose quotation or offer represents the best value to the Government.

(d) SPRS classifications are generated monthly for each contractor and can be reviewed by following the access instructions in the SPRS User’s Manual found at https://www.ppirssrng.csd.disa.mil/pdf/PPIRS-SR_UserMan.pdf. Contractors are granted access to SPRS for their own classifications only. Suppliers are encouraged to review their own classifications, the SPRS reporting procedures and classification methodology detailed in the SPRS User's Manual, and SPRS Evaluation Criteria available from the references at https://www.ppirssrng.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf. The method to challenge a rating generated by SPRS is provided in the User’s Manual.

(End of provision) http://farsite.hill.af.mil/ https://www.ppirssrng.csd.disa.mil/ http://www.acq.osd.mil/dpap/dars/dfars/html/current/213_1.htm#213.106-2 https://www.ppirssrng.csd.disa.mil/pdf/PPIRS-SR_UserMan.pdf https://www.ppirssrng.csd.disa.mil/pdf/SPRS_DataEvaluationCriteria.pdf

SOLICITATION RFQ SP3300-20-Q-0049 Page 6 of 20

DLAD 52.233-9001 Disputes – Agreement To Use Alternative Dispute Resolution

(a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute.

(b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1), or, for the Agency, by the contracting officer, and approved at a level above the contracting officer after consultation with the ADR Specialist and legal counsel. Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the contracting officer before determining ADR to be inappropriate.

(c) If you wish to opt out of this clause, check here [ ]. Alternate wording may be negotiated with the contracting officer.

(End of Provision)

15. OFFER SUBMISSION INSTRUCTIONS–Quotes must include the following items.

Submission of a quote that does not contain all items requested below may result in elimination from consideration for award.

A. Quotations may be submitted in contractor format and shall include:

(1) Company name, address, telephone number, and e-mail address.

(2) Solicitation number.

(3) Unit Price and extended price for Contract Line Item (CLIN) 0001 and Total Quoted Price.

Accessories not specifically mentioned herein, but necessary to furnish complete systems ready for use, shall also be included and named.

(4) Proposed delivery date.

(5) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code.

(6) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation).

(7) If quoting as a distributor, provide a completed copy of the following statement:

____________________ (Company Name) is an authorized distributor/reseller for ____________________ (Manufacturer Name) products and is free to set our own prices and discounts.

B. Contractors are required to include a copy of the FAR provision 52.212-3 Offeror Representations and Certifications-Commercial Items with their quote or may indicate completion of the representations and certifications on the internet at http://www.sam.gov. Failure to include the certifications along with the price quote or to complete the certifications on the internet may result in elimination from consideration for award.

16. Far 52.212-2 – Evaluation – Commercial Items Quotes will be evaluated in accordance with FAR 13.106-2. The Government intends to award one contract on an all-or-none basis to the responsible offeror who: 1) proposes the products addressed in the requirement description, or demonstrates in their descriptive literature that their proposed a product that meets the salient physical, functional, and performance characteristics addressed in the requirement description; and 2) offers the total overall lowest price for all contract line items.

Offerors must be determined to be responsible according to the standards of FAR Part 9 to be eligible for award.

http://www.sam.gov/

SOLICITATION RFQ SP3300-20-Q-0049 Page 7 of 20

Although the Government intends to award a purchase order as a result of this solicitation, the Government reserves the right to reject any and all quotes received and not award any item or items from this solicitation.

17. The following FAR, DFARS, and DLAD clauses apply to this acquisition:

FAR 52.212-4 Contract Terms and Conditions – Commercial Items (Incorporated by reference.)

52.212-5 Contract Terms and Conditions Required to Implement Statutes Executive Orders –Commercial Items (JAN 2020) (Incorporated in Full Text)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115- 91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115-232)

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108- 78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

(1) 52.203-6 Restrictions on Subcontractor Sales to the Government (Sept 2006), with

Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402)

(2) 52.203-13 Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C.

3509)

(3) 52.203-15 Whistleblower Protections under the American Recovery and Reinvestment

Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

X (4) 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

(5) Reserved

(6) 52.204-14 Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(7) 52.204-15 Service Contract Reporting Requirements for Indefinite-Delivery Contracts

(Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6 Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

(9) 52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

(10) Reserved

(11) (i) 52.219-3 Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C.

657a)

(ii) Alternate 1 (Nov 2011) of 52.219-3

SOLICITATION RFQ SP3300-20-Q-0049 Page 8 of 20

(12) (i) 52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

(ii) Alternate I (Jan 2011) of 52.219-4

(13) Reserved X (14) (i) 52.219-6 Notice Of Total Small Business Set-Aside (DEVIATION 2019-O0003) (Dec

2018) (15 U.S.C. 644).

(ii) Alternate I (Nov 2011).

(iii) Alternate II (Nov 2011).

(15) (i) 52.219-7 Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

(ii) Alternate I (Oct 1995) of 52.219-7.

(iii) Alternate II (Mar 2004) of 52.219-7.

(16) 52.219-8 Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

(17) (i) 52.219-9 Small Business Plan (Aug 2018) (15 U.S.C. 637 (d)(4)).

(ii) Alternate I (Nov 2016) of 52.219-9

(iii) Alternate II (Nov 2016) of 52.219-9

(iv) Alternate III (Nov 2016) of 52.219-9

(v) Alternate IV (Aug 2018) of 52.219-9.

(18) 52.219-13 Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

(19) 52.219-14 Limitations on Subcontracting (DEVIATION 2019-O0003) (Dec 2018)

(20) 52.219-16 Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C.

637(d)(4)(F)(i)).

(21) 52.219-27 Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Oct

2019) (15 U.S.C. 657f).

X (22) 52.219-28 Post Award Small Business Program Rerepresentation (Jul 2013) (15

U.S.C. 632(a)(2)).

(23) 52.219-29 Notice of Set-Aside for, or Sole Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

(24) 52.219-30 Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3 Convict Labor (June 2003) (E.O. 11755).

X (26) 52.222-19 Child Labor—Cooperation with Authorities and Remedies (Jan 2020) (E.O.

13126).

X (27) 52.222-21 Prohibition of Segregated Facilities (Apr 2015).

X (28) (i) 52.222-26 Equal Opportunity (Sep 2016) (E.O. 11246).

(ii) Alternate I (Feb 1999) of 52.222-26.

X (29) (i) 52.222-35 Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ii) Alternate I (July 2014) of 52.222-35.

X (30) (i) 52.222-36 Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(ii) Alternate I (July 2014) of 52.222-36.

X (31) 52.222-37 Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(32) 52.222-40 Notification of Employee Rights Under the National Labor Relations Act

(Dec 2010) (E.O. 13496).

X (33) (i) 52.222-50 Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and

E.O. 13627).

(ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627

(34) 52.222-54 Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

SOLICITATION RFQ SP3300-20-Q-0049 Page 9 of 20

(35) (i) 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

(36) 52.223-11 Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O.13693).

(37) 52.223-12 Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

(38) (i) 52.223-13 Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514

(ii) Alternate I (Oct 2015) of 52.223-13.

(39) 52.223-14 Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun 2014) of 52.223-14.

(40) 52.223-15 Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C.

8259b).

(41) (i) 52.223-16 Acquisition of EPEAT® -Registered Personal Computer Products (Oct

2015) (E.O.s 13423 and 13514).

(ii) Alternate I (Jun 2014) of 52.223-16.

X (42) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug

2011) (E.O. 13513).

(43) 52.223-20 Aerosols (Jun 2016) (E.O. 13693).

(44) 52.223-21 Foams (Jun 2016) (E.O. 13696).

(45) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552a).

(ii) Alternate I (Jan 2017) of 52.224-3.

(46) 52.225-1 Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

(47) (i) 52.225-3 Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41

U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C.

3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108- 286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

(ii) Alternate I (May 2014) of 52.225-3.

(iii) Alternate II (May 2014) of 52.225-3.

(iv) Alternate III (May 2014) of 52.225-3.

(48) 52.225-5 Trade Agreements (Oct 2019) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (49) 52.225-13 Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(50) 52.225-26 Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(51) 52.226-4 Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C.

5150).

(52) 52.226-5 Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

(53) 52.232-29 Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C. 2307(f)).

(54) 52.232-30 Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

X (55) 52.232-33 Payment by Electronic Funds Transfer--System for Award Management (Oct 2018) (31 U.S.C. 3332).

SOLICITATION RFQ SP3300-20-Q-0049 Page 10 of 20

(56) 52.232-34 Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).

(57) 52.232-36 Payment by Third Party (May 2014) (31 U.S.C. 3332).

(58) 52.239-1 Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

(59) 52.242-5 Payments to Small Business Subcontractors (Jan 2017) (15 U.S.C.

637(d)(12)).

(60) (i) 52.247-64 Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006)

(46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

(ii) Alternate I (Apr 2003) of 52.247-64.

(iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.]

(1) 52.222-17 Nondisplacement of Qualified Workers (May 2014) (E.O. 13495)

(2) 52.222-41 Service Contract Labor Standards (Aug 2018) (41 U.S.C. chapter 67.).

(3) 52.222-42 Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

(4) 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards -- Price

Adjustment (Multiple Year and Option Contracts) (Aug 2018) (29 U.S.C.206 and 41 U.S.C. chapter 67).

(5) 52.222-44 Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

(6) 52.222-51 Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-- Requirements (May 2014) (41 U.S.C. chapter 67).

(7) 52.222-53 Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C.

chapter 67).

(8) 52.222-55 Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(9) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(10) 52.226-6 Promoting Excess Food Donation to Nonprofit Organizations. (May 2014)

(42 U.S.C. 1792).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records -

- Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor’s directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the

SOLICITATION RFQ SP3300-20-Q-0049 Page 11 of 20

Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e)

(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c) and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Jan 2019) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115- 91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495). Flow down required in accordance with paragraph (1) of FAR clause 52.222-17.

(vii) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(viii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(ix) 52.222-35, Equal Opportunity for Veterans (Oct 2019) (38 U.S.C. 4212).

(x) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(xi) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xii) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222- 40.

(xiii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiv) (A) 52.222-50, Combating Trafficking in Persons (Jan 2019) (22 U.S.C. chapter 78 and E.O.

13627).

(B) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 E.O. 13627).

(xv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xvi) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvii) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xviii) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015).

(xix) 52.222-62, Paid sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xx) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xxi) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxiii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

SOLICITATION RFQ SP3300-20-Q-0049 Page 12 of 20

(End of Clause)

The following clauses are Addenda to FAR 52.212-4 – Contract Terms and Conditions – Commercial Items and are incorporated by reference:

FAR 52.204-13 System for Award Management Maintenance FAR 52.204-18 Commercial and Government Entity Code Maintenance FAR 52.204-19 Incorporation by Reference of Representations and Certifications FAR 52.204-25 Prohibition On Contracting for Certain Telecommunications And Video

Surveillance Services Or Equipment (Aug 2019) FAR 52.232-39 Unenforceability of Unauthorized Obligations FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors FAR 52.247-34 F.O.B. – Destination FAR 52.253-1 Computer Generated Forms DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials DFARS 252.203-7002 Requirement to Inform Employees of Whistleblower Rights DFARS 252.204-7003 Control of Government Personnel Work Product DFARS 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported

Cyber Incident Information DFARS 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting DFARS 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support DFARS 252.223-7008 Prohibition of Hexavalent Chromium DFARS 252.225-7002 Qualifying Country Sources as Subcontractors DFARS 252.225-7036 Buy American-Free Trade Agreements- Balance of Payments Programs DFARS 252.225-7048 Export-Controlled Items DFARS 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7010 Levies on Contract Payments DFARS 252.243-7001 Pricing of Contract Modifications DFARS 252.244-7000 Subcontracts for Commercial Items DFARS 252.247-7023 Transportation of Supplies by Sea

The following clauses are Addenda to FAR 52.212-4 – Contract Terms and Conditions – Commercial Items and are incorporated in full text:

FAR 52.252-2 -- Clauses Incorporated by Reference

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/.

(End of Clause)

DFARS 252.211-7003 Item Unique Identification and Valuation

ITEM UNIQUE IDENTIFICATION AND VALUATION

(a) Definitions. As used in this clause—

“Automatic identification device” means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

“Concatenated unique item identifier” means— http://farsite.hill.af.mil/

SOLICITATION RFQ SP3300-20-Q-0049 Page 13 of 20

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

“Data matrix” means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

“Data qualifier” means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

“DoD recognized unique identification equivalent” means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

“DoD item unique identification” means a system of marking items delivered to

DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

“Enterprise” means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

“Enterprise identifier” means a code that is uniquely assigned to an enterprise by an issuing agency.

“Government’s unit acquisition cost” means—

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor’s estimated fully burdened unit cost to the Government at the time of delivery.

“Issuing agency” means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

SOLICITATION RFQ SP3300-20-Q-0049 Page 14 of 20

“Issuing agency code” means a code that designates the registration (or controlling) authority for the enterprise identifier.

“Item” means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

“Lot or batch number” means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

“Machine-readable” means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

“Original part number” means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

“Parent item” means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

“Serial number within the enterprise identifier” means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

“Serial number within the part, lot, or batch number” means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

“Serialization within the enterprise identifier” means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

“Serialization within the part, lot, or batch number” means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

“Type designation” means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

“Unique item identifier” means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

“Unique item identifier type” means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

SOLICITATION RFQ SP3300-20-Q-0049 Page 15 of 20

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government’s unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government’s unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert “See Schedule” in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ____.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ____.

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

SOLICITATION RFQ SP3300-20-Q-0049 Page 16 of 20

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology – International symbology specification – Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that—

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology – EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology – Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall—

(A) Determine whether to—

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number);

and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

SOLICITATION RFQ SP3300-20-Q-0049 Page 17 of 20

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code—

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique…