ATTACHMENT 2 - SPI 011043416.pdf

NOTES:

1. CONTAINER CLOSURE SHALL BE AS SPECIFIED IN NOTE 3 BELOW.

2. DE-PACK AND RE-USE CONTAINERS IMMEDIATELY FOR RETURN OF SERVICEABLE / UNSERVICEABLE ITEM.

3. TO PACKAGE, RELIEVE PRESSURE BY DEPRESSING PRESSURE RELIEF BUTTON, DISENGAGE LATCHES AND REMOVE TOP FROM BASE. UNBUCKLE ALL STRAPS AND DRAPE OVER CONTAINER SIDES. PLACE ITEM ON PLATFORM. USE ALL FOUR STRAPS TO SECURE ITEM TO PLATFORM. IF POSSIBLE, IMMOBILIZE UNUSED STRAPS UNDER ITEM OR TAPE BUCKLES TO SIDE OF CONTAINER. DO NOT PLACE STRAPS OVER DELICATE PROJECTIONS. TIGHTEN STRAPS ONLY TO THE EXTENT NECESSARY TO IMMOBILIZE ITEM. PLACE DESICCANT, P/N 2, IN HOLDER IN CORNER OF CONTAINER TOP. INSURE EXCESS STRAP LENGTH DOES NOT EXTEND INTO SEALED AREA.

PLACE TOP ON CONTAINER BASE AND ENGAGE FASTENERS.

4. CAUTION: LIFT BY TOP HANDLES ONLY WHEN CONTAINER IS LOADED.

5. FOR PROCUREMENT PURPOSES, PAGES 1 - 2 OF THIS SPI DO NOT APPLY. CONTRACTORS WILL PACKAGE ITEMS IN THE ALTERNATE PACKAGE SPECIFIED IN PAGES 3 - 4

OF THIS SPI EXCEPT AS SPECIFIED IN NOTE 6.

6. IF REPAIRABLE ITEMS ARE RECEIVED BY THE CONTRACTOR FOR REPAIR IN THIS CONTAINER, CONTRACTORS MAY RE-USE THE CONTAINER FOR RETURN OF

SERVICEABLE ITEM TO THE GOVERNMENT.

PRESERVATION: IAW MIL-STD 2073

SERVICEABLE METHOD: 54

UNSERVICEABLE METHOD: 54

QUP: 001

ICQ: 000

CLEANING & DRYING: IAW MIL-STD-2073

PRESERVATIVE: N/A

MARKING: IAW MIL-STD-129

SPECIAL MARKINGS:

A) SPI NO. F01-104-3416

B) REUSABLE CONTAINER - DO NOT DESTROY.

C) METHOD 50 MARKINGS REQUIRED.

CLOSURE:

LEVEL A: SEE NOTE 3

LEVEL B: SEE NOTE 3

PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS

LEVEL SPEC STYLE TYPE CL VRTY GR TR

A 8145-01-148-7926 B 8145-01-148-7926

LEVEL A LEVEL B

GROSS CU FT 8.73 8.73

GROSS WT LBS 114 114

DESIGN FRAGILITY G 40 40

LENGTH WIDTH DEPTH

CNTNR I.D.

LEVEL A 30 5/8 20 18 1/4

LEVEL B 30 5/8 20 18 1/4

CNTNR O.D.

LEVEL A 33 3/4 22 5/8 19 3/4

LEVEL B 33 3/4 22 5/8 19 3/4

ITEM DIM: 19 1/8 10 1/4 7 3/4

ITEM WT LBS: 52

MULTIPLE

MULTIPLE

RECEIVER-TRANSMITTER 034/86

3 1 BARRIER BAG A/R MIL-DTL-117, TY. 2, CL. E, STYLE 1

2 16 UNITS OF DESICCANT MIL-D-3464, TY. II

1 1 CONTAINER SEE PACKING

B REVISED IAW W/O 327/87 87257 C.M.

C REVISED IAW W/O 012/14 14078 C.W.

D REVISED IAW W/O 005/16 16089 C.C.

PRIMARY PACK

E REVISED IAW W/O 021/17 17058 C.W.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LTR

AutoCAD SHX Text

REVISIONS

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SPI NO (TPO)

AutoCAD SHX Text 1 jan 86

AutoCAD SHX Text form

AutoCAD SHX Text

DD 2169 MOD

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

CURR REV

AutoCAD SHX Text

ORIG DATE

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text

SPI N0.

AutoCAD SHX Text 98752

AutoCAD SHX Text

ILL

AutoCAD SHX Text

AUTH

AutoCAD SHX Text

CHK

AutoCAD SHX Text

PS

AutoCAD SHX Text

PART

AutoCAD SHX Text

NO.

AutoCAD SHX Text

QTY.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

MATERIAL SPECIFICATION

AutoCAD SHX Text

SIZE (INCHES UNLESS SPECIFIED)

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

TOLERANCES ON FRAC. 1/8,

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

DECIMAL .01, ANGLES 1 .

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text O

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text

D. BELFLOWER

AutoCAD SHX Text

C. WILLIAMS

AutoCAD SHX Text

J. KERR

AutoCAD SHX Text

C. CORBIN

AutoCAD SHX Text 86079

AutoCAD SHX Text 1 5

AutoCAD SHX Text E

AutoCAD SHX Text

APPRVD.

RECEIVER-TRANSMITTER 034/86

COMPUTER GENERATED

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text 1 Jan 86

AutoCAD SHX Text form

AutoCAD SHX Text

DD 2169 MOD

AutoCAD SHX Text

SPI NO.

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTIONS

AutoCAD SHX Text 98752

AutoCAD SHX Text C

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

2 5

PRESERVATION: IAW MIL-STD 2073

SERVICEABLE METHOD: 52

UNSERVICEABLE METHOD: OMIT P/N's 8 & 9

QUP: 001

ICQ: 000

CLEANING & DRYING: IAW MIL-STD-2073

PRESERVATIVE: N/A

MARKING: IAW MIL-STD-129

SPECIAL MARKINGS:

A) SPI NO. F01-104-3416

B) REUSABLE CONTAINER - DO NOT DESTROY.

C) METHOD 50 MARKINGS REQUIRED.

CLOSURE:

LEVEL A: IAW ASTM D6257

LEVEL B: IAW ASTM D5118

PACKING: AS SPECIFIED BELOW AND BILL OF MATERIALS

LEVEL SPEC STYLE TYPE CL VRTY GR TR

A ASTM D 6251 A O/S B

B ASTM D 5118 RSC CF WR DW V13C

LEVEL A LEVEL B

GROSS CU FT 6.9 5.8

GROSS WT LBS 108 80

DESIGN FRAGILITY G 59 59

LENGTH WIDTH DEPTH

CNTNR I.D.

LEVEL A 28 19 18

LEVEL B 28 19 18

CNTNR O.D.

LEVEL A 28 3/4 19 3/4 19 1/2

LEVEL B 28 3/4 19 3/4 19 1/2

ITEM DIM: 19 1/8 10 1/4 7 3/4

ITEM WT LBS: 52

RT-1341(V)1 / ARC-190(V)

RECEIVER-TRANSMITTER 034/86

14 A/R TAPE CONTAINER REINFORCEMENT ASTM D-5330, TY. IV, <4>

13 A/R TAPE CONTAINER CLOSURE & SEALING ASTM D 5486, TY. III, CL. 1

12 2 CUSHIONING TOP / BOTTOM 24 X 19 X 2 MIL-PRF-26514, TY. I, CL. 2, GR. C, 2.0 PCF

11 2 CUSHIONING SIDES 24 X 14 X 2 MIL-PRF-26514, TY. I, CL. 2, GR. C, 2.0 PCF

10 2 CUSHIONING ENDS 19 X 18 X 2 MIL-PRF-26514, TY. I, CL. 2, GR. C, 2.0 PCF

9 64 UNITS DESICCANT MIL-D-3464, TY. II, <5>

8 1 BARRIER BAG A/R MIL-DTL-117, TY. I, CL. E, STYLE 1

7 1 WRAP A/R A-A-3174

6 2 TOP PAD 23 1/4 X 14 1/4 PPP-F-320, CF, TW, DOM, <3>, <6>

5 2 SIDE PADS 19 1/4 X 9 1/4 X 2 A-A-59136, TY. I, CL. 2, <3>

4 2 END PADS 14 1/4 X 9 1/4 X 2 A-A-59136, TY. I, CL. 2, <3>

3 1 BOTTOM PAD 23 1/4 X 14 1/4 X 2 A-A-59136, TY. I, CL. 2, <3>

2 1 INTERIOR CONTAINER 23 1/4 X 14 1/4 X 12 3/4 ID ASTM D 5118, CF, SW, DOM, GR. 275, <3>

1 1 EXTERIOR CONTAINER SEE PACKING

SEE

NOTE

5821-01-104-3416

ALTERNATE PACK

B REVISED IAW W/O 327/87 87257 C.M.

C REVISED IAW W/O 012/14 14078 C.W.

D REVISED IAW W/O 005/16 16089 C.C.

E REVISED IAW W/O 021/17 17058 C.W.

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

SPI NO (TPO)

AutoCAD SHX Text 1 jan 86

AutoCAD SHX Text form

AutoCAD SHX Text

DD 2169 MOD

AutoCAD SHX Text

NATIONAL STOCK NO.

AutoCAD SHX Text

PART OR DRAWING NO.

AutoCAD SHX Text

CURR REV

AutoCAD SHX Text

ORIG DATE

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTION

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text

SPI N0.

AutoCAD SHX Text 98752

AutoCAD SHX Text

ILL

AutoCAD SHX Text

AUTH

AutoCAD SHX Text

CHK

AutoCAD SHX Text

PS

AutoCAD SHX Text

PART

AutoCAD SHX Text

NO.

AutoCAD SHX Text

QTY.

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

AutoCAD SHX Text

MATERIAL SPECIFICATION

AutoCAD SHX Text

SIZE (INCHES UNLESS SPECIFIED)

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

NOMENCLATURE OR

AutoCAD SHX Text

TOLERANCES ON FRAC. 1/8,

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

DECIMAL .01, ANGLES 1 .

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text O

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text

D. BELFLOWER

AutoCAD SHX Text

C. WILLIAMS

AutoCAD SHX Text

J. KERR

AutoCAD SHX Text

C. CORBIN

AutoCAD SHX Text 86079

AutoCAD SHX Text 3 5

AutoCAD SHX Text E

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

LTR

AutoCAD SHX Text

REVISIONS

APPRVD.

NOTES:

1. CONTAINER CLOSURE , SEALING AND REINFORCEMENT SHALL BE IAW APPLICABLE SPECIFICATION, EXCEPT TOP FLAPS OF FIBERBOARD SHALL BE CLOSED WITH

TAPE IN LIEU OF ADHESIVE.

2. REPAIRABLES SHALL BE PACKAGED AS SHOWN HEREON.

3. MARK P/N's 2, 3, 4, 5 & 6 WITH SPI NUMBER. USE METHODS AND MATERIALS PRESCRIBED IN MIL-STD-129.

4. USE P/N 14 TO TAPE DESICCANT TO SLEEVE AND OUTSIDE WRAP IN VOID BEFORE APPLYING BARRIER BAG.

5. ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO HEAT TREATED (HT) MATERIAL (HT 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES LATEST REVISION OF ISPM) NO.15.AND DOD 4140.01-M-1 COMPLIANCE FOR DEFENSE PACKAGING: PHYTOSANITARY REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) OFFICE. THIS INFORMATION CAN BE FOUND

AT WWW.IPPC.INT.

6. LAMINATE THE 2 TOP PADS P/N 6 FOR THICKNESS, AND CHAMFER ALL CORNERS FOR EASIER REMOVAL FROM CONTAINER.

AutoCAD SHX Text

COMPUTER GENERATED

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text 1 Jan 86

AutoCAD SHX Text form

AutoCAD SHX Text

DD 2169 MOD

AutoCAD SHX Text

SPI NO.

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTIONS

AutoCAD SHX Text 98752

AutoCAD SHX Text C

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

4 5

COMPUTER GENERATED

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text F01-104-3416

AutoCAD SHX Text 1 Jan 86

AutoCAD SHX Text form

AutoCAD SHX Text

DD 2169 MOD

AutoCAD SHX Text

SPI NO.

AutoCAD SHX Text

SPI NO. (TPO)

AutoCAD SHX Text

CODE ID

AutoCAD SHX Text

ITEM NOMENCLATURE

AutoCAD SHX Text

SPECIAL PACKAGING INSTRUCTIONS

AutoCAD SHX Text 98752

AutoCAD SHX Text C

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

OF

5 5