SOW Weight Test for Tender Boar Davit No 1.docx
DOCX document 19 KB Posted
- Attached to
- USNS MERCY Sea Crane Federal contract opportunity
- Solicitation number
- N4044323Q0057
About this file
This statement of work outlines the requirement to conduct a load test of the No. 1 Tender Boat Davit aboard the USNS Mercy. The contractor must provide equipment and certified weights to perform a 110% overload static test for 10 minutes and dynamic brake test as required by regulatory bodies. The contractor will also lift the tender boat back to its cradles following test acceptance by the US Coast Guard and ABS. The performance period is September 5-16, 2023 at Pier 1 of the Naval Base San Diego. The related federal contract opportunity is a solicitation from the Department of the Navy's Military Sealift Command for sea crane services aboard the USNS Mercy.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Provisions and Clauses.xlsx | XLSX spreadsheet | |
| N4044323Q0057_Combined Synop.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
USNS MERCY
(T-AH 19)
CONDUCT WEIGHT TEST FOR TENDER BOAT DAVIT NO. 1.
USNS MERCY
(T-AH 19)
Conduct the Load Test for Tender Boat Davit No. 1
1.0 ABSTRACT
This item describes the requirement to conduct the load test of the vessel's No. 1 Tender Boat Davit and move the Tender Boat located on the Flight Deck back to its cradles.
2.0 REFERENCES/ENCLOSURES
2.1 TG813-B7-MMC-010, FASSMER TENDER BOAT AND DAVIT WINCH TECH MANUAL
2.2 SOLAS 74 (amended), Chapter III/20 Life-Saving Appliances And Arrangements, Operational readiness, maintenance and inspections.
2.3 46CFR 199.45 Tests and Inspections of Lifesaving Equipment and Arrangements
2.4 46CFR 199.190 Operational Readiness, Maintenance, and Inspections of Lifesaving Equipment
2.5 NAVIC 04-07 Servicing and Maintenance of Lifeboats, Launching Appliances and On-Load Release Gear
2.6 MSC.1/Circ.1206 Measures to Prevent Accidents with Lifeboats
2.7 MSFSC Stand Work Item 001
3.0 ITEM LOACTION/DESCRIPTION
3.1 Locations
3.1.1 STBD Boat 01-55-1
3.2 Description
3.1.2 TENDER DAVIT BY FASSMER
Type FHD-280, WITH DEW 85
4.0 GOVERNMENT FURNISHED EQUIPMENT/MATERIAL/SERVICES
4.1 The Government will provide the services of ABS (American Bureau of Shipping) and USCG.
5.0 NOTES
5.1 The contractor and all subcontractors regardless of tier shall consult the General Technical Requirements (GTR) to determine applicability to this work item.
6.0 QUAILTY ASSURANCE REQUIRMENTS
6.1 All materials and work performed must be in accordance with USCG and SOLAS convention rules and the satisfaction of the attending USCG Inspector and ABS Surveyor.
7.0 STATEMENT OF WORK REQUIRED
7.1 Provide labor, material and equipment to conduct the load test for No. 1 Tender Boat Davit.
7.2 Provide a floating crane with the lifting capacity of 63,200.00 lbs and up to 90 feet to conduct the load test.
7.3 Provide certified test weights, dynometer and spreader bar to conduct the load test. Provide documentation of the weights, spreader bar and valid calibration of the two (2) dyno prior to conducting the load test.
7.4 Conduct 110% overload Static for ten (10) minutes and 110% overload Dynamic Brake Test as required by the Regulatory Bodies. The ship’s Crew will operate the boat davit for the load test.
7.5 After acceptance of the load tests by USCG and ABS, remove all weights.
7.6 Lift the Tender Boat from flight deck back to its cradles.
7.7 Provide three copies of the load test data.
7.8 Location: Pier 1, Naval Base San Diego
7.8 Period of Performance: 5 – 16 Sep 2023.
8.0 GENERAL REQUIREMENTS
8.1 None Additional.
File details come from the government source that posted it. Updated .