SOW Shrink Wrap Five (5) 87 Foot WPB - Copy.doc

STATEMENT OF WORK FOR

SHRINK WRAP SERVICES

PR # 2122402Y61P1195002

STATEMENT OF WORK (SOW)

Shrink Wrap Services for Five (5) Marine Protector Class Coastal Patrol Boat SCOPE: The Contractor must provide all personnel, equipment, tools, supervision, and other items necessary to perform Shrink Wrap Services, except for those items specified as government-furnished property and services. The Contractor shall perform to the standards in this order; if no standards are specified then to a commercially reasonable standard.

The Contractor is to supply all labor and materials to shrink wrap Five (5) 87 foot Coast Guard WPB Cutters. The Wrap must meet OSHA regulation 29 CFR 1915 SUBPART E. The purpose of the containment system is to protect the vessel from the elements of weather.

The wrap system must have zipper accesses to allow access to decks and compartments. The vessels are 87 feet long with a maximum beam (width) of 19.4 feet wide. The height of the highest point of the cutter is approximately 30 feet from the bottom of keel. The Contractor must provide 100% containment around vessel with fire proof shrink wrap material.

The shrink wrap material must be secured to the outer edge of the freeboard to the top of the mast. The shrink wrap must include a slope to prevent water from pooling. No water shall intrude into the inside of shrink wrapped areas. The structure shall be able to withstand sustained wind gusts up to 60 MPH.

A site visit is required. Point of Contact (POC) is LCDR Marie Baxter (313) 400-3435 The shrink wrap services must be provided starting on or about 12th June 2023, and installation completed on the Fifth Vessel on October 1st 2023. Timing and work schedule must be coordinated with the POC listed above.

GOVERNMENT FURNISHED ITEMS AND SERVICES:

Utilities: The Government will provide water, compressed air, and electricity for the Contractor as defined herein. The Contractor shall instruct employees in utilities conservation practices. The Contractor shall be responsible for operating in such a manner that precludes the waste of utilities, for example turning off the water faucets or valves after using the required amount to accomplish assigned work.

Electricity: The Government shall provide up to 200 amps and up to 480 volts of electrical services.

CONTRACTOR FURNISHED ITEMS, SERVICES, AND RESPONSIBILITIES:

General: The Contractor shall furnish all equipment and services required to perform work under this SOW, other than those explicitly addressed in government furnished services.

The Contractor shall report to the designated work site on the date specified on the written notification by the Contracting Officer in the form of a signed order. No other individual has the authority to direct the Contractor to begin work, other than a warranted Contracting Officer. Pending Coast Guard Yard production schedules, services may be required on an intermittent basis within the time period and quantity specified.

Equipment: The Contractor shall, throughout the performance of this contract, be in possession of fully functioning equipment and tools to complete assigned work. The following tools and equipment are required:

a. Safety Equipment

b. Manlift

Equipment Standards: Contractor’s trucks and equipment shall be maintained in an operable condition that meets all Federal, State of Maryland, and local safety requirements. All equipment must meet the permissible noise limits in accordance with this SOW.

Security Requirements: The U.S. Coast Guard Yard, Baltimore, MD is a controlled access area. All contractors and subcontractors performing work on this contract shall utilize the RAPIDGate program. RapidGate manages the non-Common Access Credential (CAC) eligible vendor/contractor companies and their employees who require access to Coast Guard Yard, Baltimore. Vendor/contractor CAC eligibility has been restricted to only those who require physical access to Coast Guard yard and logical access to a DoD or DHS network or system.

a. Contractor employees shall not enter restricted areas in accordance with Yard security regulations or policies. Before contractor employees can work at the Coast Guard Yard Facility, the contractor shall complete a security investigation on all contractor employees in connection to this contract. Any contractor employee with a criminal background must get prior authorization before they can gain access to Coast Guard Yard Facility. Contractor shall provide for each employee to the Contracting Officer, the full name and any alias, address, city and state, and date of birth.