SOW.doc

Statement of Specification for JML 0328-0152: GibbsCAM

Programming stations for Okuma Bridge Mill MCR-B III & KURAKI COMPANY LTD CNC Horizontal Boring Mill model KBT11Z

1. Specification:

1.1. Scope: Provide two (2) each Gibbs CAM programming stations that include machine tool simulation and post processor’s for Okuma Bridge Mill MCR-B III & KURAKI COMPANY LTD CNC Horizontal Boring Mill model KBT11Z . Contractor shall also provide on-site installation and training.

2. Equipment Specifications:

2.1. SALIENT CHARACTERISTICS: Gibbs CAM programming stations for Okuma Bridge Mill MCR-B III & KURAKI COMPANY LTD CNC Horizontal Boring Mill model KBT11Z Programming stations shall have the following salient characteristics (minimum)

2.1.1. CAM Programming Station: CAM programming station that includes the following:

2.1.1.1. GibbsCam 2.5D Solids Milling & Turning Package

2.1.1.2. Polar & Cylindrical Milling

2.1.1.3. Machine Simulation

2.1.1.4. GibbsCam Annual Maintenance

2.1.1.5. Machine Sim Model

2.1.1.6. GibbsCam MTM Post Processor

2.1.1.7. GibbsCam Training On‐Site four(4) days

2.1.1.8. Personal Computer that contains no WIFI, no camera and no wireless devices

2.1.1.9. Lockable computer cabinet similar to Figure 1.

Figure 1

3. Additional Requirements:

3.1. Machine Simulation Model: Contractor shall measure and gather data to create Machine Simulation Model for Okuma Bridge Mill MCR-B III & KURAKI COMPANY LTD CNC Horizontal Boring Mill model KBT11Z. Delivery shall be within 4 weeks After Receipt of Order.

3.2. Post Processor: Contractor shall provide custom GibbsCAM post processor for Okuma Bridge Mill MCR-B III & KURAKI COMPANY LTD CNC Horizontal Boring Mill model KBT11Z

3.3. Training / on-site support Requirements: Contractor shall provide four eight-hour days of training and support. All services shall be provided inside of building 171 between the hours of 7:20 am and 3:50 pm excluding any federal holidays. Services shall include on-site training and support for provided post processers and Programming Software.

3.4. Quality assurance Testing: Contractor shall develop two part programs one part for each machine. Contractor shall manufacture programed part using material provided by Norfolk Naval Shipyard.

3.4.1. Test Acceptance Criteria: Developed program shall create tool paths in accordance with created program.