SOW Camera.pdf

Salient Characteristics for Museum Artifact Collection Support

Unless specified elsewhere, all items must be delivered no later than 120 days after contract is awarded.

Items are essential for inventory control and artifact documentation as required by Air Force Instruction 84-103, U.S. Air Force Heritage Program.

Camera body must meet the following requirements:

• EOS 7D MARK II DSLR CAMERA or equal

• Type - Digital AF/AE single-lens reflex camera with built-in flash

• Recording media - CF Cards (Type I); Compatible with UDMA CD cards; SD, SDHC, and SDXC Memory Cards

• Image Format - Approx. 22.4 x 15.0 mm (APS-C size)

• Image sensor: High-sensitivity, high-resolution, large single-plate CMOS sensor; Effective pixels:

Approx. 20.2 megapixels; Total pixels: Approx. 20.9 megapixels; Aspect ratio: 3:2 (Horizontal:

Vertical); Self Cleaning Sensor Unit

• Image format - Still: JPEG, RAW (14-bit, Canon original), sRAW, mRAW, RAW+JPEG; Video: MOV (Image data: H.264, Audio: Linear PCM), MP4 (Image data: H.264, Audio: AAC)

• Recording functions - Records to either the CF card or SD card. Auto switch card; When the current card becomes full, the camera switches to the other card automatically. Record separately; The CF card and SD card record the same image at a different image recording quality. Record to multiple;

Both the CF card and SD card record the same image at the same image recording quality (Also applies to RAW+JPEG, M-RAW+JPEG, and S-RAW+JPEG

• Auto white balance with the image sensor

• Color temperature compensation - Blue/amber bias: ±9 levels Magenta/green bias: ±9 levels Correction based on the current WB mode's color temperature

• LCD monitor type: TFT color, liquid-crystal monitor

• Monitor Size: 3.0-inch

• Pixels : Approx. 1.04 million dots

• Brightness Control:

• Auto: Brightness adjusted automatically by the light sensor (Darker/ Standard/Brighter)

• Manual: 7

• Shutter:

• Vertical-travel, mechanical, focal-plane shutter with all speeds electronically-controlled

• Shutter Speeds - 1/8000 to 30 sec., bulb (Total shutter speed range. Available range varies by shooting mode.) X-sync at 1/250 sec.

• Shutter Release - Soft-touch electromagnetic release

• Self Timer - 10-sec. or 2-sec. delay

• Shutter Lag Time - During SW-1 ON, time lag between SW-2 ON and start of exposure:

Approx. 0.055 sec.; During silent shooting, approx. 0.105 sec.; With flash, approx. 0.095 sec.;

During silent shooting with flash, approx. 0.145 sec. Time lag between simultaneous SW- 1/SW-2 ON and start of exposure: Approx. 0.17 sec.; During silent shooting, approx. 0.22 sec.; With flash, approx. 0.215 sec.; During silent shooting with flash, approx. 0.265 sec.

• Retractable, auto pop-up flash with E-TTL II auto flash metering system; Approx. 3 se. recycling time;

Flash coverage: 15mm lens angle of view (equivalent to approx. 24mm in 135mm format); Flash Exposure Compensation: ±3 stops in 1/3-or 1/2-stop increments

• Exposure control metering modes: Approx. 150,000-pixel RGB+IR metering sensor; EOS iSA System with 252-zone metering Evaluative metering (linked to all AF points) Partial metering (center, approx. 6% of viewfinder) Spot metering (center, approx. 1.8% of viewfinder); AF point-linked spot metering not provided. Center-weighted average metering; The selectable metering modes can be restricted with a Custom Function.

• Exposure compensation: Manual: ±5 stops in 1/3-or 1/2-stop increments; AEB: ±3 stops in 1/3-or 1/2-stop increments; Indicated up to ±3 stops on the LCD panel and in the viewfinder; ISO speed for still photos during movie shooting: 1: ISO 100 – ISO 6400, 2: ISO 100 – ISO 16000, 3: Same as the ISO speed used for movie shooting.

• Tilt display: On LCD Monitor - Electronic level indicates up to 360° roll and ±10° pitch in 1° increments; In Viewfinder - Horizontal: 7.5° left/right, Vertical: 4° top/bottom

• Dimensions (W x H x D) - Approx. 5.85 (W) x 4.43 (H) x 3.08 (D) in.

• Must be compatible with Macro, Standard, Telephoto, and lenses

Macro Lens must meet the following requirements:

• Canon EF 100mm f/2.8L Macro IS USM or equal

• Focal Length & Maximum Aperture - 100mm 1:2.8

• Lens Construction - 15 elements in 12 groups

• Diagonal Angle of View - 23.4°

• Focus Adjustment - Inner focusing system with USM. Full-time manual focus available.

• Closest Focusing Distance -.99 ft./0.3m (maximum close-up magnification: 1x)

• Filter Size - 7mm

• Max. Diameter x Length, Weight -.1 x 4.8 in./77.7 x 123mm, 22.0 oz./625g

• Must be compatible with camera body

Standard Lens must meet the following requirements:

• Canon RF24–105mm F4-7.1 IS STM or equal

• Focal Length & Maximum Aperture - 24-105mm, f/4-7.1

• Minimum Focusing Distance - During AF: 0.7 - 1.12 ft./ 0.2 - 0.34m; During MF: 0.43 - 1.12 ft./ 0.13 - 0.34m

• Maximum Magnification - During AF: 0.4x (105mm); - During MF: 0.5x (24mm)

• Lens Construction - 13 elements in 11 groups

• Special Lenses - One aspherical lens

• Filter Size - Ø67mm

• Aperture Blades - 7 (circular)

• IS (CIPA Standard Correction Effect) - 5 stops

• Focus Drive System - STM + lead screw

• Minimum Overall Length - Approx. 3.50 in. / 88.8mm

• Maximum Diameter - Approx. Ø3.02 in. / Ø76.6mm

• Weight - Approx. 0.87 lbs. / 395g

Telephoto Lens must meet the following requirements:

• EF 70-200mm f/2.8L IS III USM telephoto lens or equal

• Focal Length & Maximum Aperture - 70-200mm 1:2.8

• Lens Construction - 23 elements in 19 groups (1 Fluorite and 5 UD elements)

• Diagonal Angle of View - 34° - 12°

• Focus Adjustment - Inner focusing system with USM. Full-time manual focus available

• Closest Focusing Distance - 1.2m/3.94 ft. (maximum close-up magnification: 0.21x)

• Filter Size - 77mm

• Max. Diameter x Length, Weight - 3.5 x 7.8 in./88.8 x 199mm; 52.6 oz./1490g

Wide-Angle Lens must meet the following requirements:

• Canon EF 14mm f/2.8L II USM wide-angle lens or equal

• Focal Length & Maximum Aperture - 14mm f/2.8

• Lens Construction - 14 elements in 11 groups

• Diagonal Angle of View - 114° (on full-frame cameras)

• Focus Adjustment - AF with full-time manual

• Closest Focusing Distance - 7.9 in. / 0.2m

• Filter Size - Gel filter holder at rear of lens

• Max. Diameter x Length, Weight - 3.2 in. x 3.7 in. / 80mm x 94mm; 22.8 oz./645g (lens only)

On-Camera flash (aka. “speedlight”) must meet the following requirements:

• Canon Speedlite 600EX-RT or equal

• Guide Number - The maximum Guide No. is approximately 196.9 ft./60m at ISO 100 varies from approximately 85.3 ft./26m to 196.9 ft. /60m according to the flash coverage (20 to 200 mm). When the extendable wide panel is pulled out, the flash coverage is 14 mm and the Guide No. is approximately 15/49.2

• Number of Flashes - Approx. 100 - 700 flashes (with size-AA/LR6 alkaline batteries)

• Recycling Time - Normal flash: Approx. 0.1 - 5.5 sec.; Quick flash: Approx. 0.1 - 3.3 sec. (With size- AA/LR6 alkaline batteries; )Flash-ready state indicated by beep sound

• Effective flash range at ISO 100

• Quick Flash

• High-speed Sync (at 1/250 sec.)

• AF Assist Beam - System: Near-infrared light pattern projection method; Linkable AF Points:

Supports 1 to 61-Point High Density Reticular AF; Supported focal length - EF Lens: 28mm or greater, EF-S Lens: 18mm or greater

• Effective Range (Approx.): At Center: 2.0 - 32.8 ft. / 0.6 - 10 m; Periphery: 2.0 - 16.4 ft. / 0.6 - 5 m

• Custom Functions - 18 Functions; Personal Functions - 7 Functions

• Power Source - Four AA-size/LR6 alkaline or rechargeable Ni-MH or Lithium Batteries

• Dimensions - Approx. 3.1 (W) x 5.6 (H) x 4.9 (D) in. / 79.7 (W) x 142.9 (H) x 124.5 (D) mm

• Weight - Approx. 15.0 oz / 425 g

Macro Lens Ring Light must meet the following requirements:

• Macro Ring Lite MR-14EX II or equal

• Flash Type - Ring Lite, twin circular flash tubes, and separate Controller Unit

• Flash Control System: Control in E-TTL Mode: FP Sync, FE lock, Flash +/- compensation, Flash Exposure Bracketing Control in Manual Mode: Flash +/- compensation Ratio Control in Manual: L:R tubes (A:B); 8:1 - 1:1 - 1:8 in 1/2-stop increments

• Custom Functions - Twelve (in addition to any on camera), set on flash LCD; three Personal Functions

• General Power Source - 4 AA batteries in Controller (Alkaline, NiCd, Lithium and Ni-MH type AAs are

OK)

LED Studio Lighting must meet the following requirements:

• Litepanels Lykos+ Bi-Color LED Light or equal

• Beam angle 50°

• Color temperature 3200 to 5600K

• Color Accuracy Standard CRI 96, TLCI 96

• Dimming 0 to 100%

• Photometrics - 50° at 3200K: 177.3 fc / 1908 Lux at 3.3' / 1 m, 50° at 5600K: 199.5 fc / 2148 Lux at 3.3' / 1 m

• Expected Lamp Life 50000 Hours

• AC Input Power - 100 to 240 VAC, 50 / 60 Hz

• DC Input Power - 14.4 VDC

• Max Power Consumption - 23 W

• Power Cable/Adapter Included

• Fixture Dimensions - 10.2 x 6.0 x 1.7" / 260.0 x 152.0 x 42.0 mm

• Fixture Weight 1.1 lb / 500 g

• Fixture Mount - Shoe Mount

• LED Light must be compatible with Light Stand

• Require 3 each

Stand for LED Light must meet the following requirements:

• Manfrotto 5001B Nano Light Stand or equal

• Maximum Working Height - 6.2' / 1.9 m

• Minimum Working Height - 19.3" / 49 cm

• Load Capacity - 3.3 lb / 1.5 kg

• Collapsed Height - 19" / 48.3 cm

• Stand/Column Top Mount - 5/8” Receiver

• 5/8" Stud with Reversible 1/4"-20 & 3/8"-16 Male

• Max Power Consumption 23 W

• Color Black

• Light Stand must be compatible with LED Light

• Require 3 each

Storage Case for LED lights and stands must meet the following requirements:

• Pelican 1510 Carry-On Case with Foam Set or equal

• Carry/Transport Options - Side Handle, Telescoping Handle, Top Handle, Wheels

• Closure Type - Latch

• Materials - Polypropylene

• Interior Contents - Cube/Diced Foam

• Exterior Dimensions - 22 x 13.8 x 9" / 55.9 x 35.1 x 22.9 cm

• Interior Dimensions - 19.8 x 11 x 7.6" / 50.3 x 27.9 x 19.3 cm

• Watertight - Yes, O-Ring Seal

• Maximum Buoyancy - 64.2 lb / 29.1 kg

• Weight - 13.6 lb / 6.2 kg

• Must be compatible with LED lights and stands

• Require 1 each

Impact Filled Saddle Sandbag, 15 pounds must meet the following requirements:

• Impact Filled Saddle Sandbag (15 lb, Orange), B&H Photo #IMSBFO15 or equal

• Design - Saddle Bag

• Weight Capacity - 15 lb / 6.8 kg

• Fill Material - Sand

• Closure Type - Zipper

• Water Resistant

• Material - Nylon

• Dimensions (L x W) - 17.8 x 11.0" / 45.0 x 28.0 cm

• Strap Width - 1.5" / 4.0 cm

• Color Orange

• Require 6 each

Impact Filled Saddle Sandbag, 25 pounds must meet the following requirements:

• Impact Filled Saddle Sandbag (25 lb, Orange), B&H Photo #IMSBFO25 or equal

• Design - Saddle Bag

• Weight Capacity - 25 lb / 11.3 kg

• Fill Material - Sand

• Closure Type - Zipper

• Water Resistant

• Material - Nylon

• Dimensions (L x W) - 25.0 x 11.0" / 63.5 x 28.0 cm

• Strap Width - 1.5" / 4.0 cm

• Color Orange

• Require 4 each

Photographic Backdrop Support System must meet the following requirements:

• Impact Pro Backdrop Support Kit (12.9' Width), B&H Photo #IMBGPS440 or equal

• Load Capacity - 38 lb / 12.2 kg

• Sections - Four

• Dimensions:

• Stands: Max. Height: 13.5' / 4.1 m; Min. Height: 4.5' / 1.4 m; Folded: 3.6' / 1.1 m; Footprint:

4' / 1.2 m

• Crossbar: Min. Extension: 4.8' / 1.5 m; Max. Extension: 12.9' / 3.9 m

• Weight - 15 lb / 17.2 kg

• Color Black

Steel Spring Clamp must meet the following requirements:

• Impact 2" Steel Spring A-Clamp (Black), B&H Photo #IMSSCA20B or equal

• Clamp Type - Spring

• Jaw Shape - Flat

• Jaw Opening - 2.0 " / 5.0 cm

• Dimensions - 2 1/4 x 2”

• Require 12 each

Photographic Muslin Background, Black must meet the following requirements:

• Impact Muslin Background (10 x 12', Black), B&H Photo #IMBGB1012 or equal

• Material - muslin

• Looped Hem for Crossbar

• Spot Washable

• Dimensions - 10’ x 12' / 3 x 3.7 m

Photographic Muslin Background, White must meet the following requirements:

• Impact Muslin Background (10 x 12', White), B&H Photo #IMBGW1012 or equal

• Material - muslin

• Looped Hem for Crossbar

• Spot Washable

• Dimensions - 10’ x 12' / 3 x 3.7 m

• Color White

Photographic Muslin Background, Light Gray must meet the following requirements:

• Impact Solid Muslin Background (10 x 12', Light Gray), B&H Photo #IMBGS1012G or equal

• Material - muslin

• Looped Hem for Crossbar

• Spot Washable

• Dimensions - 10’ x 12' / 3 x 3.7 m

• Color Light Gray

Computer Cart must meet the following requirements:

• ULINE Computer Cart, Model # H-4607, Black, or equal

• Adjustable height, 29” - 42”, mobile workstation cart

• Shelf Quantity - 3

• Top shelf has a safety mat and retaining lip

• Welded steel with durable powder-coat finish

• 4" rubber swivel casters: 2 locking

• Includes slide-out keyboard tray

• 3 outlet UL/CSA Listed power strip and 15' cord

• Dimensions - 26” x 20” x 29” - 42”

• Load Capacity - 400 lbs

• Cart Weight - 42 lbs

Utility Cart must meet the following requirements:

• ULINE UTILITY CART, Model # H-2504 or equal

• Rounded edges to prevent wall damage

• Shelf Quantity - 2

• 2 5/8" deep trays are 19" apart

• Non-marking 5" quiet rubber casters: 2 swivel, 2 rigid

• Dimensions - 45 x 25 x 33”

• Load Capacity - 500 lbs

• Cart Weight - 43 lbs

• Require 2 each