SOW 8-28-2023 Updated for SAM.docx
DOCX document 29 KB Posted
- Attached to
- V-22 Click Stud Rapid Cure System Case Assemblies Federal contract opportunity
- Solicitation number
- N68335-24-R-0027
About this file
This statement of work outlines requirements for the procurement of case assemblies to support the V-22 Click Stud Rapid Cure System. The Navy seeks to acquire 104 each of case assembly part number 4026AS518-1 in accordance with provided drawings by no later than February 1, 2024. The contractor must furnish complete case assemblies comprised of all features illustrated for 4026AS518-1, and provide a certificate of conformance upon delivery. Packaging and shipping must prevent damage during transportation to the Navy's Lakehurst Staging Facility.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOW SAM updated.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for
CLICK STUD RAPID CURE SYSTEM CASE ASSEMBLIES
28-AUGUST 2023
1. SCOPE
This statement of work (SOW) is for the Firm Fixed Price procurement of case assemblies in support of the V-22 Click Stud Rapid Cure System, in accordance with drawings referenced below. There is a requirement for (104) each of the following case assemblies: P/N 4026AS518-1.
1.1 Applicable Documents:
a) Drawing: 4026AS518 Case assembly
b) Drawing: 3909AS9999 Identification Plate
The applicable documents/drawings listed above are export-controlled documents, therefore a valid and current DD2345 is required in order to receive same.
Name: Paul Avenoso E-mail at paul.j.avenoso.civ@us.navy.mil
(ALL QUESTIONS ARE TO BE SUBMITTED VIA FEDBID – NO EXCEPTIONS!)
1. REQUIREMENTS
2.1 General
The contractor shall provide complete case assemblies in accordance with drawings provided.
· Case 4026AS518-1 must be furnished complete as illustrated.
a. 4026AS518-1 Case Assembly is comprised of all find numbers (F/N) on drawing, F/N 1 through F/N 11.
b. Please refer to all applicable notes on 4026AS518 (notes 1 through 11)
c. A certificate of conformance, complying to notes 1 through 10 should be supplied upon delivery.
**The TPOC will provide ID placard and plate information after contract award.**
2.2 Specifications
NO substitutes are allowed.
2.3 Government Inspection and Acceptance
Government Inspection and Acceptance of all units shall be accomplished at the DESTINATION.
3.0 PACKAGING, PRESERVATION AND SHIPPING
Packaging and preservation for shipping shall be in accordance with best commercial practices. Shipments shall be packaged and transported (FOB Destination) via safe, secure, reliable, and traceable means of transportation and provide protection from normal climatic/weather conditions and incidental mishandling during shipping to prevent any damage or loss during shipment. All shipments under this contract shall be addressed to the NAVAIR Lakehurst Staging Facility as indicated below:
All exterior shipping containers/packaging shall at a minimum be marked with the following information: Part Number; Nomenclature; Quantity; Contract Number.
Deliveries shall be made by NLT 2/1/2024.
File details come from the government source that posted it. Updated .