Solicitation W912BV20Q0120 with attachmetns.pdf

SEE ADDENDUM

(No Collect Calls)

W912BV20Q0120 19-Jun-2020

b. TELEPHONE NUMBER

918.669.7657

8. OFFER DUE DATE/LOCAL TIME

02:00 PM 02 Jul 2020

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912BV9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

C C THAYER

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIV

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

2488 E. 81ST STREET

TULSA OK 74137-4290

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

918-669-7436FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$8,000,000

NAICS:

561730

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF92

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912BV20Q0120

Section A - Solicitation/Contract Form

INSTRUCTIONS TO OFFERORS

Instructions to Offerors

Read the solicitation in its entirety and all amendments before submitting documents. Payments will be made after receipt of a proper invoice and receipt of acceptable supplies or services. Regular office hours: Monday to Friday, 8:00 a.m. to 4:30 p.m. CST

MAIL, FAX, EMAIL or HAND DELIVER YOUR DOCUMENTS

Do not include excess information, to include audio-visual materials, electronic media, CD’s, thumbdrives, etc. or pages of the solicitation that do not contain information provided by the perspective offeror. NO cross outs or strike through marks. Submit a legible quote with no correction marks.

EMAIL

Emailed quotes must be received in a supported Adobe or Microsoft Office file format. These formats are the only acceptable methods of submitting a quote electronically. Zip Files, Cloud storage providers, google docs, web based drop boxes, OneNote/OneDrive, URLs, web-based format, or any other virtual/web-based memory service are NOT acceptable methods of submitting a quote electronically. All documents must be attached in one file.

Reference the solicitation in the subject line. Send quotes to E-mail address CESWT-CT-SS- Quotes@USACE.Army.mil and copy Colleen.Thayer@USACE.Army.mil. Ensure your quote is received before the due date and time. In order for your quote to be considered responsive, all required materials must be received before the due date and time. If all required materials are not received your quote will not be considered.

FAX or MAIL

Include a cover sheet that references the Contract Specialist – Colleen Thayer and the solicitation number. When submitting through mail ensure you clearly mark the envelope to:

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

Colleen Thayer, CECT-SWT-E 2488 East 81st Street

TULSA, OK 74137

FAX: (918) 669-7436

Clearly mark the envelope in the lower left hand corner with the solicitation number. All pages should be numbered. Use only 8 ½ by 11 inch paper for fax or mail submissions. Do not use fold-outs (e.g., 11” x 14” or 11” x 17” sheets). Do not use a font size smaller than 10, or condensed print for any submission. Time New Roman or Arial Font are the only acceptable fonts. All page margins must be at least 1 inch wide, but may include headers and footers. Illegible handwritten quotes will not be considered. Typed quotes are highly encouraged and the preferred method. Do not use spring clamps, staples, or exceed the recommended capacity of the fastener or binder.

Do not use plastic multi-hole/spiral binding systems, heat binding systems, or other systems which do not facilitate the ready insertion of additional pages or removal of pages. DO NOT use tabbed dividers, flagged tabs, or any divider that extends beyond the paper size to separate sections. The pages must be able to be removed from their binding without ripping or tearing. Ensure to allow enough time to submit your quote before the due date and time.

HAND DELIVER

If your submission will be hand-carried, please provide notification to the Contract Specialist at least two working day in advance, (918-669-7657) or Colleen.Thayer@USACE.Army.mil, as unescorted visitors are not allowed in the Contracting Division offices. Please consider in your arrival that visitors must go through security check points located on the 16th floor of the small tower. Offerors can only submit their documents to the Contract Specialist or a Contracting Officer of the Tulsa District Office. The address of the Tulsa District Office is below:

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

2488 East 81st Street

TULSA, OK 74137-4290

This procurement is being conducted in accordance with Simplified Acquisition Procedures (SAP) of FAR Parts 12 and 13. Any reference to offers or bids or offerors or bidders should be substituted with quotations or quoters. All reference to discussions shall not be interpreted under FAR Part 15, but rather indicate that the Government may communicate with offerors/quoters as allowed under simplified acquisition procedures.

Submit the following documents:

1) A signed copy of the 1st page of the solicitation and all amendments

2) Complete the past performance references page, if included in solicitation.

3) Complete the pricing schedule provided in the solicitation.

4) Complete all FAR Clauses with applicable blanks filled in from SECTIONS I, K, and L.

5) Your quote must identify the business size of the prime contractor and the business name and address of any subcontractors, if applicable, based on the NAICS code identified. Offerors must clearly identify whether a subcontractor(s) will be performing work, the percentage of work to be performed by each subcontractor, and the socio-economic category into which each identified subcontractor falls. (FAR 52.219-14 LIMITATIONS ON

SUBCONTRACTING (DEVIATION 2019-O0003) (JAN 2019))

INQUIRIES – OFFEROR’S QUESTIONS AND COMMENTS

USE OF BIDDER’S INQUIRY

Prospective offerors shall submit questions and inquiries related to this solicitation in accordance with the following (no other means of questions or inquiries will be answered except through Bidder Inquiry):

For information related to amendments, and the dates set for receipt of proposals, please check https://beta.sam.gov.

Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet.

1. To submit and review bid inquiry items, offerors will need to be a current registered user or self-register into the system. To self-register go to the aforementioned web page and click on the BID tab.

Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e-mail address, and then click login. Fill in all required information and click create user.

Verify that information on next screen is correct and click continue.

2. From this page, you may view all bidder inquiries or add an inquiry.

3. Bidders will receive an acknowledgement of their question via e-mail, followed by an answer to their question after it has been processed.

The Solicitation Number is: W912BV20Q0120

The Bidder Inquiry Key is: 3IZV69-UG3ZS8

The Bidder Inquiry System will be unavailable for new inquiries 2:00 PM CST Wednesday, 24 June 2020 in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

4. Offerors are requested to review the specification in its entirety, and review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

5. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.

6. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

7. The point of contact for this solicitation is:

Contract Specialist: Colleen Thayer Telephone: 918-669-7657 E-mail: Colleen.Thayer@usace.army.mil

PREPROPOSAL/SITE VISIT CONFERENCE

A Preproposal Conference/Site Visit is scheduled for 10:00 am central standard time on 23 June 2020 at Eufaula Lake Office, US Army Corps of Engineers, 103 E. BK 200 Road, Stigler, OK 74462-1829 . The Site Visit will allow prospective Contractors an opportunity to view the site conditions first hand. A question and answer period will not be conducted. Questions must be posed using Bidder’s Inquiry as per the instructions above.

ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Government will provide the successful offeror with the required Army iWatch Antiterrorism Briefing documentation within two (2) business days of Contract Award.

In accordance with AFARS 5132.702(a)(ii)(B): “Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.”

Section B - Supplies or Services and Prices

PRICING SCHEDULE

BID SCHEDULE

PROJECT: EUFAULA LAKE

BASE YEAR: 08-Jul-2020 - 31-MAR-2021

CONTRACTOR:

CONTRACT NUMBER:

SCHEDULE I

APPENDIX A - MOWING AND HERBICIDE

* IMPROVED AREAS

ITEM SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 Belle Starr South 6 EA

0002 Brooken Cove North 6 EA

0003 Ladybird Landing & South Overlook 6 EA

0004 Elm Point 6 EA

0005 Gentry Creek 6 EA

0006 Highway 9 Landing (East/North/South) 6 EA

0007 Mill Creek 6 EA

0008 Oak Ridge 6 EA

0009 Porum Landing 6 EA

0010 Project Office & East Storage Yard 11 EA

0011 Damsite East & Fishing Areas 6 EA

TOTAL IMPORVED AREA

0012 Dam Embankment 3 EA

0013 Herbicide Application 2 EA

TOTAL BASE YEAR:

ACRONYMS: EA - EACH

OPTION YEAR 1: 01-APR-2021 - 31-MAR-2022

CONTRACTOR:

CONTRACT NUMBER:

SCHEDULE I

APPENDIX A - MOWING AND HERBICIDE

* IMPROVED AREAS

ITEM NO SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

1001 Belle Starr South 12 EA

1002 Brooken Cove North 12 EA

1003 Ladybird Landing & South Overlook 12 EA

1004 Elm Point 12 EA

1005 Gentry Creek 12 EA

1006 Highway 9 Landing (East/North/South) 12 EA

1007 Mill Creek 12 EA

1008 Oak Ridge 12 EA

1009 Porum Landing 12 EA

1010 Project Office & East Storage Yard 19 EA

1011 Damsite East & Fishing Areas 12 EA

TOTAL IMPROVED AREA

1012 Dam Embankment 5 EA

1013 Herbicide Application 4 EA

TOTAL OPTION YEAR 1

OPTION YEAR 2: 01-APR-2022 - 31-MAR-2023

CONTRACTOR:

CONTRACT NUMBER:

SCHEDULE I

APPENDIX A - MOWING AND HERBICIDE

* IMPROVED AREAS

ITEM NO SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

2001 Belle Starr South 12 EA

2002 Brooken Cove North 12 EA

2003 Ladybird Landing & South Overlook 12 EA

2004 Elm Point 12 EA

2005 Gentry Creek 12 EA

2006 Highway 9 Landing (East/North/South) 12 EA

2007 Mill Creek 12 EA

2008 Oak Ridge 12 EA

2009 Porum Landing 12 EA

2010 Project Office & East Storage Yard 19 EA

2011 Damsite East & Fishing Areas 12 EA

2012 Dam Embankment 5 EA

2013 Herbicide Application 4 EA

TOTAL OPTION YEAR 2:

OPTION YEAR 3: 01-APR-2023 - 31-MAR-2024

CONTRACTOR:

CONTRACT NUMBER:

SCHEDULE I

APPENDIX A - MOWING AND HERBICIDE

* IMPORVED AREAS

ITEM SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

3001 Belle Starr South 12 EA

3002 Brooken Cove North 12 EA

3003 Ladybird Landing & South Overlook 12 EA

3004 Elm Point 12 EA

3005 Gentry Creek 12 EA

3006 Highway 9 Landing (East/North/South) 12 EA

3007 Mill Creek 12 EA

3008 Oak Ridge 12 EA

3009 Porum Landing 12 EA

3010 Project Office & East Storage Yard 19 EA

3011 Damsite East & Fishing Areas 12 EA

3012 Dam Embankment 5 EA

3013 Herbicide Application 4 EA

TOTAL OPTION YEAR 3:

OPTION YEAR 4: 01-APR-2024 - 31-MAR-2025

CONTRACTOR:

CONTRACT NUMBER:

SCHEDULE I

APPENDIX A - MOWING AND HERBICIDE

* IMPROVED AREAS

ITEM NO SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

4001 Belle Starr South 12 EA

4002 Brooken Cove North 12 EA

4003 Ladybird Landing & South Overlook 12 EA

4004 Elm Point 12 EA

4005 Gentry Creek 12 EA

4006 Highway 9 Landing (East/North/South) 12 EA

4007 Mill Creek 12 EA

4008 Oak Ridge 12 EA

4009 Porum Landing 12 EA

4010 Project Office & East Storage Yard 19 EA

4011 Damsite East & Fishing Areas 12 EA

4012 Dam Embankment 5 EA

4013 Herbicide Application 4 EA

TOTAL OPTION YEAR 4:

TOTAL BASE PLUS ALL OPTIONS

SUB-CONTRACTING INFORMATION:

Self-Performing:

Name of Prime Contractor

Business Size of Prime contractor

Percentage of Work To Be Completed by Prime Contractor

Sub-Contractor (if applicable):

Name of Sub-Contractor

Address

Business Size and Socio-economic Category

Percentage of Work to be

Completed by Sub-Contractor

Section C - Descriptions and Specifications

SCOPE OF WORK

S P E C I F I C A T I O N S

EUFAULA LAKE

OKLAHOMA

MAINTENANCE CONTRACT

FOR MOWING

ORGANIZATION OF SPECIFICATIONS

This specification consists of a general section supplemented by exhibits and appendices. A Table of Contents is provided on the following page.

The general section contains requirements that apply to all work to be performed under the provisions of this specification. The exhibits contain detailed listings or examples referred to in the general section and the Performance Requirements. The appendices contain a description of the facilities to be serviced and the work to be performed.

Any reference to paragraphs or subparagraphs in this specification will refer to those in the general section unless otherwise noted.

TABLE OF CONTENTS

Para.

No. Paragraph Title 1 Scope of Work 2 Definitions 3 References 4 Initiation, Execution, & Acceptance of Work 5 Personnel 6 Equipment 7 Performance Requirements 8 Contractor Quality Control 9 Deductions for Deficient Work 10 Safety 11 Reporting Defective Facilities 12 Required Insurance and Insurance Certificate 13 Pre-work Conference 14 Contractor Submittals 15 Billing 16 Changes in Amount of Facilities Serviced

EXHIBITS

No. TITLE 1 Performance Requirements Table 2 Quality Assurance Report 3 Quality Control Inspection Log 4 Example of Job Hazard Analysis 5 Invoice Format

APPENDICES

Appendix Title A Mowing – Improved Area B Mowing – Semi Improved Area

Facilities Inventory & Mowing Maps

1. SCOPE OF WORK. The work required under this specification provides for the mowing, trimming, and edging of public use areas, the dam embankment, and other project lands at Eufaula Lake.

2. DEFINITIONS.

2.1. Contractor Quality Control (CQC). The contractor's system of controlling the quality of services provided under the provisions of the contract.

2.2. Deficient Service. Any service provided by the contractor that does not meet the Performance Standards specified in the Performance Requirements given in Exhibit 1.

2.3. Government. The term "Government" as used herein means the United States of America.

2.4. Performance Requirement (PR). The Government's requirement for each service provided under the contract.

The requirements are stated as Performance Standards (PStd), and specify the minimum standard (quality) for each service provided under the contract.

2.5. Project. The term "project" as used herein means all Government property and easements at Eufaula Lake.

2.6. Public Use Area (PUA). Parks as well as overlooks, nature and hiking trails, access points, and other areas used by the public for recreation.

2.7. Quality. Conformance with the contract specification.

2.8. Quality Assurance (QA). The procedure by which the Government determines CQC is functioning effectively.

2.9. Regulations. The term "regulations" refers to any local, state, or Federal law or regulation applicable to operation or maintenance of the project.

2.10. Workday. Any day, Monday through Friday, exclusive of Federal holidays. This definition should not be interpreted to mean work is not required by this specification on other days.

3. REFERENCES. Corps of Engineers Safety and Health Requirements Manual (EM 385-1-1) is hereby incorporated into this specification. The Contracting Officer will furnish EM 385-1-1 to the contractor after contract award.

4. INITIATION, EXECUTION, AND ACCEPTANCE OF WORK.

4.1. PERFORMANCE BASED MOWING.

4.1.1. Initiation and execution of work. Work shall be performed as needed to comply with the performance standards (Performance Requirements Table, Exhibit 1). It is the contractor’s responsibility to determine mowing frequency and perform the mowing without work orders from the Contracting Officer. Work will be accepted based on compliance with performance requirements. Refer to Paragraph 7. for inspection criteria and contractor performance evaluation.

4.1.2. Acceptance of work. The Government shall accept work unless the Contracting Officer notifies the contractor of deficient services.

4.1.2.1. Initial notification of deficiencies may be written or oral; however, all oral notification shall be confirmed by the Contracting Officer in writing within two (2) workdays. Written notification shall be provided by completing Parts I, II, and III of a Quality Assurance (QA) Report (SWT Form 982, Exhibit 2).

4.1.2.2. If the Contracting Officer notifies the contractor of deficient work the contractor shall initiate action to accomplish corrective work. Refer to paragraph 10 for deficient work not reperformed.

4.1.2.3. The contractor shall notify the Contracting Officer when corrective work is completed. Notification shall be made by completing Part IV of the QA Report provided it has been furnished to the contractor. If not, notification shall be made orally. When work has been corrected, the Contracting Officer shall take necessary action to complete Part V of the QA Report and provide a copy to the contractor.

5. PERSONNEL. The contractor shall provide personnel necessary to accomplish all work required by this specification within specified time limits.

5.1. Experience and Skills. The contractor shall provide personnel that are experienced and demonstrate proficiency in the skills required performing the various types of work specified.

5.2. Supervision.

5.2.1. The contractor shall provide one supervisor on the project who shall have full authority to direct any work required. This supervisor and alternates, who shall have full authority to execute work during his absence, shall be designated in writing.

5.2.2. The contractor shall provide the Contracting Officer a local or toll-free telephone number at or through which the supervisor can be reached between 8:00 a.m. and 5:30 p.m. on all days work is being performed. Use of a cellular phone is acceptable, contractor must have a cell phone that receives good service around the lake.

6. EQUIPMENT. The contractor shall furnish equipment necessary to accomplish work required performing the various types of work specified.

6.1. Equipment Inspections. Upon request, the contractor shall present equipment to the Contracting Officer for inspection. The contractor shall not use equipment until it has passed inspection by the Contracting Officer. The Contracting Officer shall establish the time and location for these inspections.

6.2. Equipment Requirements. All equipment used to perform work under this specification must be in good operating and mechanical condition and shall comply with EM 385-1-1.

6.2.1. Tractors shall be equipped and operated in accordance with the following.

6.2.1.1. Tractors will be four wheel drive and must have duel rear wheels.

6.2.1.2. Power take offs on tractors shall operate at a minimum of 540 rpm during mowing operations.

6.2.1.3. Seat belts shall be worn at all times by tractor operators. Refer to subparagraph 16.B.08. of EM 385-1-1.

6.2.1.4. A substantial guard or shield will be installed on the tractor to protect the operator from flying objects during mowing. The guard or shield shall be covered with not less than 1/4-inch woven wire mesh or expanded metal with openings no greater than one inch. Refer to subparagraph 16.B.03.a. and 16.B.11.a of EM 385-1-1.

6.2.1.5. Rollover protection will be provided. If the structure is not designed and installed by the manufacturer of the tractor, the contractor shall furnish a certificate from a registered professional engineer that the rollover protection is structurally safe for its intended purpose. Refer to subparagraph 16.B.12. of EM 385-1-1.

6.2.2. Mowers shall be commercial rotary-type or flail-type and shall meet the following requirements:

6.2.2.1. Mowers shall be equipped with rear or side discharge, safety chains, rock guards or other protective devices to prevent flying objects from injuring people or damaging property.

6.2.2.2. Mowers shall be equipped with slides and wheels.

6.2.2.3. Brush hogs will not be used on the slopes of dikes around oxidation ponds.

6.2.2.4. Mowers used on the embankment of the dam will have a minimum cutting width of 15 feet.

6.2.2.5. Mulching mowers will not be used.

6.2.2.6. Brush hogs and tractors will not be used within improved areas.

6.2.2.7. All safety devices provided by the manufacturers of push and riding mowers will function as designed.

6.2.3. Edger’s will be equipped with a rotary blade in an upright position. A protective guard for the blade shall be provided.

6.2.4. Signs located on each side of the vehicles shall mark all sedans and trucks used by the contractor to perform work under this specification. Signs may be painted on the doors or magnetic signs may be attached to the doors.

Magnetic signs shall not be removed at any time vehicles are at the project. Lettering shall be at least 2 inches high.

Each sign shall contain the following:

EUFAULA LAKE

MOWING SERVICES

PROVIDED BY

(Contractor's Name)

6.3. Equipment Operation.

6.3.1. Mowing equipment shall be operated in a manner that will allow for discharge of grass clippings away from roads, ponds, facilities, etc., and prevent damage to turf.

6.3.2. Power operated trimming equipment shall not be used around any shrubs or trees with a diameter less than 3 inches at breast height.

6.4. Vehicle Operation and Parking. While performing work under this contract, vehicles shall be operated and parked only on roads, parking areas, or pullouts unless the Contracting Officer approves use of other areas.

7. PERFORMANCE REQUIREMENTS. PRs for work performed under this specification are given in Exhibit 1.

The contractor's performance will be evaluated using these PRs as follows:

7.1. Services provided by the contractor will be inspected for compliance with PStds. Those not meeting PStds shall be considered deficient. Major or recurring minor deficiencies will result in a letter of correction being issued by the Contracting Officer's Representative.

7.2. Deficient services are determined during initial QA inspections since the purpose of QA is to determine how well CQC is functioning. The results of inspections are not changed as a result of satisfactory reperformance.

8. CONTRACTOR QUALITY CONTROL. The contractor shall establish and execute a CQC Program to assure that all work required by this specification is completed on schedule and in accordance with the PRs in Exhibit 1.

8.1. The results of all quality control inspections conducted by the contractor shall be entered on the Quality Control Inspection Log (SWT Form 990, Exhibit 5). A copy of completed inspection logs shall be furnished the Contracting Officer weekly.

8.2. The Contracting Officer may waive the requirements in subparagraph 8.1. if he determines proper CQC can be achieved without the required submissions. The Contracting Officer will normally make this determination on the basis of actual performance by the contractor.

9. DEDUCTIONS FOR DEFICIENT WORK. Deductions from the contractor's scheduled earnings shall be made for services that do not meet the PStds in Exhibit 1. Deductions for documented defects will be made in accordance with the following procedures:

9.1. Each service found deficient and reperformed by the contractor: No deduction.

9.2. Each service found deficient and performed by the Government: Deduction for loss in value shall be based on the Government's cost for performing the work.

9.3. Each service found deficient and performed by another contractor: Deduction is the contract price paid the other contractor to perform the work.

9.4. Each service found deficient and not reperformed by anyone, or work not performed at all: Deduction for loss in value shall be based on estimates of the contractor's cost for performing the work, i.e., labor, materials, equipment costs, work schedules, etc. Loss in value shall be based on the contract bid price or applicable portion thereof.

10. SAFETY.

10.1. Safety Plan. The contractor shall furnish the Contracting Officer a safety plan to implement the general policies and procedures for safe operation and maintenance of the project in accordance with EM 385-1-1. The safety plan shall include, but not be limited to the following:

10.1.1. Procedures for training employees in responsibilities for safety of others, including the general public.

10.1.2. Requirements for wearing or utilizing personal safety equipment and apparel. Hard hats safety glasses and hearing protection are required at all times when mowing and trimming.

10.1.3. Procedures for handling, reporting, and correcting unsafe conditions, practices, and safety violations.

10.1.4. Procedures for treating and transporting injured persons to medical facilities.

10.1.5. Fire prevention plans.

10.1.6. Job hazard analyses shall include an evaluation of hazards that might be encountered for an operation, and proposed methods and techniques for accomplishing each job in a safe manner. Contractor personnel shall be thoroughly indoctrinated with job hazard analyses, especially at the start of a major job. Initially, the safety plan shall include, but not be limited to, job hazard analyses for the jobs listed below. However, the contractor shall prepare additional analyses as the need arises and/or the Contracting Officer directs. Job hazard analysis directed by the Contracting Officer shall be submitted for approval within one (1) week. An example of a job hazard analysis is given in Exhibit 6.

10.1.6.1. Loading and unloading of equipment (analysis for each type of equipment to be used to perform services required by this specification).

10.1.6.2. Equipment operation and maintenance (for each type of equipment).

10.1.6.3. Vehicle operation and maintenance.

10.2. Safety Violations. If a contractor's employee persists in not following the safety requirements of this specification or the contractor's safety plan, the employee shall be permanently discharged after 3 violations upon the request of the COR. The contractor further acknowledges that $100.00 per violation will be deducted from the monthly invoice in which the violation occurs.

10.3. Personal Clothing and Safety Apparel. Contractor personnel shall wear clothing suitable for the weather and working conditions. The minimum shall be short-sleeve shirt and long trousers (no sleeveless shirts or tank tops, or shorts). Clothing shall be in good repair. Personnel will wear additional protective apparel when required by Section 5, EM 385-1-1.

10.4. Accident Reports.

10.4.1. The contractor shall immediately notify the Contracting Officer of all known accidents that occur at the project and result in death or serious injury.

10.4.2. The contractor shall investigate all accidents involving contractor or subcontractor employees that result in death, traumatic injury, occupational disease, or damage to property, materials, supplies and equipment incidental to work performed under this specification. The results of investigations shall be reported to the Contracting Officer immediately, and in writing on ENG Form 3394, Accident Investigation Report, within one (1) workday following the accident.

10.5. Exposure Reports. The contractor shall maintain an accurate record of exposure data (man-hours worked) and submit the figure in writing monthly by the 2nd workday of the following month.

11. REPORTING DEFECTIVE FACILITIES. While performing work, contractor personnel shall observe the condition of Government facilities. Damaged, defective, and/or inoperative facilities shall be reported to the Contracting Officer each workday.

12. REQUIRED INSURANCE AND INSURANCE CERTIFICATE. Pursuant to FAR 28.301(b) for the protection of the Government, and FAR 28.306(b) and 52.228-5, Work on a Government Installation, the Contractor shall procure and maintain during the entire period of his performance under this contract the following minimum insurance:

12.1. Worker’s Compensation and Employer’s Liability: Workers' compensation and employers' liability insurance in compliance with applicable state statutes, with a minimum liability coverage of $100,000.

12.2. General Liability: Comprehensive general liability insurance for bodily injury in the minimum limits of $500,000 per occurrence. Property damage liability insurance shall be required in an amount of at least $100,000.

12.3. Automobile liability: Liability insurance shall be written on the comprehensive form of policy. The policy shall provide for bodily injury and property damage liability covering the operation of all automobiles used in connection with performing the contract. Policies covering automobiles operated in the United States shall provide coverage of at least $200,000 per person and $500,000 per occurrence for bodily injury and $20,000 per occurrence for property damage.

The amount of liability coverage on other policies shall be commensurate with any legal requirements of the locality and sufficient to meet normal and customary claims.

13. PREWORK CONFERENCE. The Contracting Officer shall conduct a Prework Conference with the contractor to discuss the provisions of this specification and the contractor's submittals listed in paragraph 13 below. As a minimum, the officer of the company that signed the contract and the on-site supervisor shall represent the contractor. The Contracting Officer shall establish the location, date, and time of the Prework Conference after consultation with the contractor.

14. CONTRACTOR SUBMITTALS. Unless otherwise noted, the contractor shall submit the documents listed below to the Contracting Officer prior to starting work. All submittals, other than copies of contracts, shall be typed and the original and one copy shall be furnished the Contracting Officer. If the Contracting Officer determines any of the submittals do not comply with this specification, the contractor shall resubmit these documents within one (1) week.

14.1. Names of on-site supervisor and his alternate (submit prior to initiation of work and prior to changing designated employees) (subparagraph 5.2.1.).

14.2. Safety Plan (subparagraph 10.1.).

14.3. Job Hazard Analysis (subparagraph 10.1.6.)

14.4. Exposure reports (submit by 2nd workday of each month) (subparagraph 10.5.).

14.5. Herbicide Certificate (Appendix A subparagraph 3.5 and Appendix B subparagraph 3.2.2.)

15. BILLING.

15.1. The contractor shall submit an original and two copies of invoices on completed work only at the end of each month. However, an invoice for completed IWOs may be submitted at any time during the month.

15.2. Invoices shall be prepared in the format shown at Exhibit 7.

15.3. All exposure reports and requested documents shall be submitted before an invoice will be accepted.

15.4. Invoices and supporting documents shall be delivered or emailed to the COR, Eufaula Lake Office 102 E. BK 200 Rd. Stigler, OK 74462.

16. CHANGES IN AMOUNT OF FACILITIES SERVICED. Adjustment in contract price will be negotiated at the request of either party, only if either or both of the following conditions occur.

16.1. Services required are deleted for a period of one (1) month or longer in an entire park.

16.2. A singular change in the amount of project facilities to be serviced is made and the change results in an annual increase or decrease in the cost of work that exceeds $300. The cost of increases or decreases shall be based upon estimates of the contractor's costs for performing the work.

EXHIBIT 1

PERFORMANCE REQUIREMENTS

PERFORMANCE REQUIREMENTS

SERVICE REQUIREMENT PR NO. PERFORMANCE STANDARDS

APPENDIX A

Improved areas 1 Smooth cut. 1Height of cut grass does not exceed 1/2 inch from that specified. No uncut vegetation.

Lawn areas 2 Smooth cut. 1Height of cut grass does not exceed 1/2 inch from that specified. No uncut vegetation.

Edging 3 Edge of grass is a uniform vertical cut with no runners extending beyond vertical face.

Herbicide Application 4 All vegetation in road cracks, parking areas, each side of boat ramps and courtesy docks etc.

APPENDIX B

Embankment area 5 Smooth cut. 1Height of cut grass does not exceed 1 inch from that specified. 2No uncut vegetation.

APPENDICES A & B

Trimming 6 Uniform cut with no scalping of grass. No damage to trees or shrubs.

Clean designated areas after mowing 7 No vegetation or debris left on paved or concrete surfaces.

Contractor Quality Control 8 Establish & maintain quality control system to satisfactorily inspect & ensure that all required work is performed & is in full compliance with this contract’s PStds, The QC representative shall have full authority and power to act for the contractor on items pertaining to overall work performance, management and coordination. Requirements for the QC are stated in Paragraph 9.3.2.

Submittals 9 All contract required documents submitted on time for COR approval. Contractor Quality Control Plan, Safety Plan, Invoices, Injury & Exposure Reports, Antiterrorism / Operations Security Requirements

Completion of work requirements 10 All work requirements completed before crew leaves an area. This includes but not limited to lagoons where applicable, lagoon wetlands where applicable, well pump areas where applicable, access roads, to water’s edge where specified, etc.

1. Conformance with height requirement shall be determined by measuring the height of cut grass on smooth ground.

2. The Contracting Officer will relax this requirement to a degree when the height of grass prior to mowing is excessive. The Contracting Officer shall make the determination of excessive grass height unilaterally.

EXHIBIT 2

QUALITY ASSURANCE REPORT

EXHIBIT 3

QUALITY CONTROL INSPECTION LOG

EXHIBIT 4

EXAMPLE OF JOB HAZARD INSPECTION LOG

EXHIBIT 5

INVOICE FORMAT

BILLING FOR

MAINTENANCE CONTRACT

PROJECT: ________________________________ SHEET ___ OF ___

CONTRACTOR: _____________________________ DATE: ___________

ADDRESS: ________________________________ CONTRACT NO: W912BV-__-_-____

BILLING PERIOD: ________ THRU __________ INVOICE NO: __________

PAYMENT TERMS: ____________________________

(Payment Discount or N/A)

BID ITEM

NO. DEDUCTION AMOUNT TOTAL

PAYMENT REQUESTED: ______________

CONTRACTOR (Signature/Date)

APPENDIX A

PERFORMANCE BASED MOWING IMPROVED AREAS

1. FACILITIES TO BE SERVICED. Public use areas and Lake Office complex. An inventory of mowing areas bid by the "month" is given in Table A. All mowing maps are at the end of Appendix B.

2. FREQUENCIES AND TIMES OF SERVICE.

2.1. Work shall be performed between 7:00 a.m. to 7:00 p.m., from 1 April through 31 August and 7:30 am to 6:30 pm from 1 September to 31 October, Frequencies is listed in Table A.

2.2. Mowing of PUAs shall not be accomplished on Saturdays, Sundays, Federal holidays, or one workday before Federal holidays.

3. DESCRIPTION OF WORK. Mowing shall be performed in Improved Areas and shall be cut no lower than a minimum height of 2 inches. In addition, mow the areas described below and around facilities shown on the drawings

3.1. Areas adjacent to all roads and parking areas, mowing shall be accomplished for a distance of 15 feet from each edge of the road or parking area or to the tree line, whichever is closer. The limits of mowing at intersections shall be determined by the Contracting Officer to provide a safe viewing distance for vehicles approaching the intersections.

3.2. Areas around park and lake entrance signs. Park entrance signs are located beside roads shown on the attached maps. The area to be mowed around these park signs shall follow the mow line of the previous mowing. If there needs to be any changes, the Contracting Officer will determine the length of the new area to be mowed in front of these signs.

3.3. Trimming will be maintained around all vertical objects protruding from the ground, including under guardrails, trees, reservation bollard signposts, and fence posts which exist within the limits of improved areas. This includes trimming along railroad ties delineating pullouts and wheel stops. This includes cracks between restrooms and where sidewalks meet. Anywhere riprap and vegetation meet and inside playground barriers.

3.4. Edging will be accomplished along all concrete walkways and curbs.

3.5. The contractor will apply Aquatic herbicides only in lieu of trimming. The COR must approve use of chemicals. The contractor shall submit a list of proposed products with manufacturers Material Safety Data Sheets (MSDS) for review. All herbicides shall be applied by a certified applicator. Proof of certification shall be provided before application of any herbicides. The contractor shall submit an application report each time herbicides are applied. The COR shall furnish the form.

3.6. Cleanup. Prior to mowing, the contractor shall remove rocks and debris that are likely to damage equipment or be thrown by the mower. After mowing is accomplished, the contractor will remove vegetation and debris from parking lots, paved walkways and pullouts, and table and picnic shelter slabs.

3.7. Herbicide Spraying. The contractor will apply Aquatic herbicide only to control vegetation growing in the cracks of paved surfaces, on gravel campsites, campsite impact areas, or the interior of the oxidation ponds from the water line to top of embankment on the inside slope. This includes all woody vegetation inside chain link fence around oxidation ponds. Herbicide may be applied to all rip-rapped areas adjacent to campsites, each side of boat ramps and both sides of courtesy docks in lieu of trimming. For general use pesticides, the contractor will complete the Tulsa District Pesticide Management Training Requirement or possess a Certified Pesticide Applicator’s license respective to the State where the pesticide is being applied. Application of restricted pesticides is limited to State Certified Pesticide Applicators or those working under direct supervision of personnel certified in applying restricted-use pesticides in the specific state categories commensurate with the work to be performed. The contractor will submit information on the proposed use of any restricted use pesticides prior to their use to the COR for approval. Completion of the Tulsa District Pesticide Management Training Requirement or State Certified Pesticide Applicator’s license will be provided to the COR prior to application of pesticides. The contractor is required to provide the COR an after application report within 10 business days of application including Herbicide trade name, EPA registration number, Target pest (e.g., Johnson Grass or All Vegetation), Location description, Total estimated acres treated, and quantity of actual pesticide used (quantity of pesticide not the total volume of mix). Soil neutralizers will not be allowed for use in herbicide mixtures. Spraying of herbicides will not be used in lieu of trimming or edging along concrete walkways or curbs. Special care will be taken when applying herbicides to not allow overspray outside the approved areas allowed for treatment. The contractor will not spray further than 8” around or along any object that would otherwise be trimmed, any excessive overspray will be considered damage to Government property, and the cost to repair such damage will be at the contractor expense. The contractor will not use herbicide in lieu of trimming around trees and entrance fence at the Project office, around the monuments at the South overlook or the monument at Ladybird Landing.

4. RESTRICTIONS ON WORKING. The contractor will not start work unless the grass and ground are dry enough for smooth cutting and equipment will not cause rutting of the ground. The Contractor will be responsible for repairing ruts. The contractor shall use good judgment in determining whether conditions are suitable for mowing operations. The COR will determine whether work shall progress or stop. Areas excluded by these conditions will also be excluded in the inspections.

TABLE A

INVENTORY OF PERFORMANCE BASED MOWING AREAS

LOCATION

IMPROVED

AREAS(AC)

PLAYGROUNDS

(NO)

TOILETS

SHELTERS

Belle Starr South 72 2 4 2 Brooken Cove North 58 1 4 2 Ladybird Landing & South Overlook 36 1 6 1 Elm Point 14 0 1 1

Gentry Creek 30 1 3 1

Highway 9 Landing ( East/North/South 62 1 5 1

Mill Creek Bay 17 0 1 1 Oak Ridge 9 0 1 0 Porum Landing 34 1 4 2 Project Office, East Storage Yard 8 0 0 0 Dam Site East & Fishing Areas 18 0 3 1 Total 358 7 32 12

Frequencies are as listed. The contractor shall initiate mowing within (3) calendar days of the date specified.

Project Office and East Storage Yard only.

April - 3rd week May thru October, end of 1st week, middle of 3rd week, end of last week of each month.

All remaining locations listed in Table A.

April - 3rd week May thru September, 1st and 15th of each month.

October - 1st of the month.

Number of mowing’s each year – 12

APPENDIX B

PERFORMANCE BASED DAM MOWING

AND HERBICIDE AREAS

1. FACILITIES TO BE SERVICED. Dam embankments, saddle dikes, levees, public use areas, lake office complex and other project lands. An inventory of mowing areas bid by the month is given in Table B. All mowing maps are at the end of Appendix B.

2. FREQUENCIES AND TIMES OF SERVICE.

2.1. Work shall be performed between 7:00 a.m. and 7:00 p.m., from 1 April through 31 October.

2.2. Mowing of PUAs shall not be accomplished on Saturdays, Sundays, Federal holidays, or one workday before Federal holidays.

3. DESCRIPTION OF WORK. The contractor shall perform the following work as directed.

3.1. Mowing.

Contractor shall begin work for mowing of embankment as specified below. The contractor shall initiate mowing within (3) calendar days of the date specified and complete the mowing within 7 calendar days after work is initiated. Embankment will be mowed no lower than 4”in height.

May 1st, June 15th, August 1st, September 15th, October 25th

3.2. Trimming.

3.2.1. Every time the embankments is mowed trimming will be accomplished around piezometers, staff gauges, relief wells, manholes, guard posts, and buildings located on the embankment; along the edge of the embankment riprap; and around guardrail and signposts on both sides of the embankment road.

3.2.2. The contractor will apply Aquatic herbicides only in lieu of trimming. The Project Manager must approve use of chemicals. The contractor will submit a list of proposed products with manufacturers Material Safety Data Sheets (MSDS) for review. All herbicides will be applied by a certified applicator. Proof of certification will be provided before application of any herbicides. The contractor will submit an application report each time herbicides are applied. The Contracting Officer shall furnish the forms.

3.3. Herbicide. Vegetative growth will be controlled with an approved Aquatic herbicide with a colored dye added in the areas listed in Table B and will be applied on within (3) calendar days of the date specified with a 90 % kill or re-applied within (10) days at no additional cost.

May 1st, June 15th, August 1st, September 15th

3.3.1 Interior and exterior areas and fences of the East yard compound, project office compound and South Overlook this includes vegetation in all road cracks and sidewalk cracks.

3.3.2 All Riprap areas of Dam, wrap-around, south toe-bank, riprap north side of south fishing area parking lot and road slope this includes Lakeside and river side rip-rap.

3.3.3. All Federal, State and local licensing and application requirements shall be met prior to and during application of herbicides.

3.3.4. Johnson grass Eradication, a pre-emergent and a herbicide will be applied to both north and south embankment areas, the pre-emergent and herbicide will be specific for the elimination of Johnson grass and will be applied annually. Pre-emergent will be applied in April if weather permits and the herbicide will be applied in June.

4. RESTRICTIONS ON WORKING. The contractor will not start work unless the grass and ground are dry enough for smooth cutting and equipment will not cause rutting of the ground. The contractor will use good judgment in determining whether conditions are suitable for mowing operations. In cases where the contractor and the Contracting Officer disagree about the suitability of conditions for mowing operations, the Contracting Officer will determine whether work shall progress or stop. Areas excluded by these conditions will also be excluded in the inspections.

TABLE B

PERFORMANCE BASED EMBANKMENT

MOWING & HERBICIDE AREAS

HERBICIDE EMBANKMENT

AREAS AREAS

LOCATION (AC) (AC)

Dam Embankment 17 Dam North/South Riprap Wrap Arounds, Dam South Toe Bank, Slope Road Riprap & Rock Drain South (Including all fences & guardrails) 5 East Yard Compound 1 Powerhouse Compound 1 Project Office Driveway and parking 1 Project Office inside Compound 1 South Overlook, road cracks, sidewalks 1 And outside chain-link fence 1 Emergency Rip-Rap stockpile 1 North of South fishing area parking lot 1

TOTALS 13 17

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-1 Contractor Inspection Requirements APR 1984 252.201-7000 Contracting Officer's Representative DEC 1991

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

52.242-15 Stop-Work Order AUG 1989

Section G - Contract Administration Data

252.204-7006 Billing Instructions OCT 2005 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

Section H - Special Contract Requirements

WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5333 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 06/03/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Oklahoma

Area: Oklahoma Counties of Choctaw Haskell Latimer McCurtain Pittsburg Pushmataha

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.19 01012 - Accounting Clerk II 16.57 01013 - Accounting Clerk III 18.54 01020 - Administrative Assistant 19.10 01035 - Court Reporter 19.66 01041 - Customer Service Representative I 11.13 01042 - Customer Service Representative II 12.51 01043 - Customer Service Representative III 13.65 01051 - Data Entry Operator I 14.97 01052 - Data Entry Operator II 16.33 01060 - Dispatcher Motor Vehicle 21.55 01070 - Document Preparation Clerk 12.66 01090 - Duplicating Machine Operator 12.66…