SOLE SOURCE_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number) 4093-3539 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Advance Pressure Systems Manufacturer POC & Phone Nr. Victor Lugo 346-831-8022 Mfr. Address 701 South Persimmon St. Bldg. J Tomball, TX 77375

X Description of the item or service required, the estimated cost, and required delivery date.

Aqua-Dyne Blastmax Series 50 pumps. This equipment will be used for cleaning reboilers and ensure the shop’s capabilities to support reboiler cleaning in a timely and effective manner to meet project deadlines.

X Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

This equipment provides the needed pressure (10K PSI) and flow rate (7 GPM) needed to effectively perform reboiler cleaning.

This equipment is already approved and in use at PSNS as well as trained personnel for using the equipment.

This equipment is proprietary to the manufacture.

X The requested material or service represents the minimum requirements of the Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

X The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

Aqua-Dyne Blastmax Series 50 pumps will aid in performing reboiler cleaning. The high pressure water jetting pumps are already approved and in use, with trained personnel, and could provide interchangeable parts.

X A patent, copyright, or proprietary data limits competition. The proprietary data is:

Equipment is exclusively manufactured by APS Shape Technologies Group for Aqua-Dyne Shape Technologies Group.

These are “direct replacements” parts/components for existing brand name equipment.

Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Signature Activit

Contracting Officer Signature Date

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018