SOLE SOURCE_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$250k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on (Document numbers 32230155, 32230156, 32230157) is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Holmatro Inc Manufacturer POC & Phone Nr: Cassie Crisafulli, 410-768-9662 Mfr. Address: 505 McCormick Dr. Glen Burnie, MD 21061 Manufacturers Dealer/Rep: Cassie Crisafulli, 410-768-9662

_ __Description of the item or service required, the estimated cost, and required delivery date.

JML DOC: 32230155: 1 EA. Hydraulic Core Cutters, model: CU 5060, manufacturer p/n:

150.012.288, JML DOC: 32230156: 1 , manufacturer p/n: 158.572.131, JML DOC: 322301570: 1 EA. SR20 PC2 Pumps for Hydraulic Core Cutter, manufacturer p/n:

159.000.109, Total:

Need date: 11/13/23

__X__Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

This specific cutting tool was chosen by the U.S Navy for C/760 divers to purchase for emergency for the navy/civilians to use for cutting through dry dock or ships interferences. This is required as part of a PSNS seismic emergency plan for dry docks currently undergoing seismic repairs. The Distributor does not need to be sole sourced as long as the manufacturer part numbers are awarded. JML 32230155 is for the cutting tool itself, 32230156 is for the connection hoses, and 32230157 is for the hydraulic pump power source.

____The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_ __The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

____A patent, copyright, or proprietary data limits competition. The proprietary data is:

____ nents for existing brand name equipment.

____Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature________________________________ Date__________________

FISCPS 4200/180 (Rev. 10/1/10)